High pressure behavior of alkaline earth tellurides

We have predicted high pressure structural behavior and elastic properties of alkaline earth tellurides (AETe; AE = Ca, Sr, Ba) by using two body interionic potential approach with modified ionic charge (Z _m e). This method has been found quite satisfactory in case of the rare earth compounds. The equation of state curve, structural phase transition pressure from NaCl (B1) to CsCl (B2) phase and associated volume collapse at transition pressure of alkaline earth tellurides (AETe) obtained from this approach, so have been compared with experimentally measured data reveal good agreement. We have also investigated bulk modulus, second and third order elastic constants and pressure derivatives of second order elastic constants at ambient pressure which shows predominantly ionic nature of these compounds. First time, we have calculated the Poisson ratio, Young and Shear modulus of these compounds.      

Structural and elastic properties of barium chalcogenides (BaX,X=O,Se, Te) under high pressure

In the present paper we have investigated the high-pressure, structural phase transition of Barium chalcogenides (BaO, BaSe and BaTe) using a three-body interaction potential (MTBIP) approach, modified by incorporating covalency effects. Phase transition pressures are associated with a sudden collapse in volume. The phase transition pressures and associated volume collapses obtained from TBIP show a reasonably good agreement with experimental data. Here, the transition pressure, NaCl-CsCl structure increases with decreasing cation-to-anion radii ratio. In addition, the elastic constants and their combinations with pressure are also reported. It is found that TBP incorporating a covalency effect may predict the phase transition pressure, the elastic constants and the pressure derivatives of other chalcogenides as well.      

High pressure behavior and structural properties of transition metal carbides

A pressure induced structural phase transition from NaCl-type (B₁) to CsCl-type (B₂) structure has been predicted in transition metal carbides, namely TiC, ZrC, NbC, HfC, and TaC by using an interionic potential theory with modified ionic charge (Z_m ), which includes Coulomb screening effect due to d-electron. The phase transition pressure (P_T ) relies on large volume discontinuity in pressure–volume relationship, and identifies the structural phase transition from B₁ phase to B₂ phase. The variation of second-order elastic constants with pressure follows a systematic trend identical to that observed in other compounds of NaCl-type structure. The Born criterion for stability is found to be valid in transition metal carbides.     

First-principles study of structural and elastic properties of CrO2 at high pressure

The structural and elastic properties of CrO₂ in the rutile phase under high pressures have been investigated using pseudopotential plane-wave method based on density functional theory. The optimized lattice parameters and the bulk modulus at zero pressure agree well with available experimental and theoretical data. The elastic constants C ₁₁, C ₁₂, C ₄₄, C ₃₃, C ₁₃, and C ₆₆ at zero pressure are calculated to be 359.91, 264.69, 143.28, 309.45, 218.45, and 260.74 GPa, respectively. Elastic constants, bulk modulus, shear modulus, Young's modulus, and Poisson's ratio under pressures are obtained. Our results indicate that the rutile phase is mechanically stable below 11.99 GPa. The elastic anisotropy of rutile phase under pressures has also been predicted.     

A theoretical study of structural, elastic and thermal properties of heavy lanthanide monoantimonides

The structural, elastic and thermal properties of three heavy monoantimonides of holmium, erbium and thulium (LnSb, Ln=Ho, Er and Tm) have been investigated theoretically by using an interionic potential theory consisting of long-range Coulomb, short-range repulsive and van der Waal’s (vdW) interactions. These compounds exhibit first-order crystallographic phase transition from their initial NaCl-type structure to CsCl-type structure at pressures 27, 33.2 and 29.8 GPa for HoSb, ErSb and TmSb, respectively. The values of elastic constants and Debye temperatures as a function of pressure are also reported. The elastic properties such as Young modulus (E), Shear modulus (G), Poisson ratio (υ) and anisotropic ratio (A) in an NaCl-type structure are also predicted.     

Study of phase transformation and elastic properties of ThX (X = N,P, As and Sb) under high-pressure

An improved interaction potential model (IIPM) has been formulated to theoretically predict the pressure induced phase transition, elastic properties and thermophysical properties of thorium monopnictides (ThX; X = N, P, As and Sb). The phase transition pressures and volume drop obtained from this model show a better agreement with the available experimental than theoretical results. We have achieved elastic moduli, anisotropy factor, Poisson's ratio, Kleinman parameter, shear and stiffness constants on the basis of the calculated elastic constants. To know the anharmonic properties, we have also computed the third-order elastic constants, first-order pressure derivatives of second-order elastic constants and thermophysical quantities. Our results are in reasonable agreement with available measured and others reported data which supports the validity of model.     

Structural phase stability and elastic behavior of III-V scandium pnictides

A modified interaction potential (MIPM) model (including the covalency effect) has been developed and applied for the first time to investigate the high-pressure structural phase transition of scandium pnictides (ScAs and ScSb). Phase transition pressures are associated with a sudden collapse in volume indicating the occurrence of first order phase transition. The phase transition pressures and associated volume collapses obtained from present potential model show a generally better agreement with available experimental data than others. The elastic constants and their pressure derivatives are also reported. Moreover, the thermo physical properties have also been obtained successfully. Our results are in good agreement with available experimental and theoretical data.     

Structural,elastic, thermodynamic and electronic properties of LuX (X = N,Bi and Sb) compounds: first principles calculations

ABSTRACT

The structural, electronic, elastic and thermodynamic properties of LuX (X = N, Bi and Sb) based on rare earth into phases, Rocksalt (B1) and CsCl (B2) have been investigated using full-potential linearized muffin-tin orbital method (FP-LMTO) within density functional theory. Local density approximation (LDA) for exchange-correlation potential and local spin density approximation (LSDA) are employed. The structural parameters as lattice parameters a₀, bulk modulus B, its pressure derivate B’ and cut-off energy (E_c) within LDA and LSDA are presented. The elastic constants were derived from the stress–strain relation at 0 K. The thermodynamic properties for LuX using the quasi-harmonic Debye model are studied. The temperature and pressure variation of volume, bulk modulus, thermal expansion coefficient, heat capacities, Debye temperature and Gibbs free energy at different pressures (0–50 GPa) and temperatures (0–1600 K) are predicted. The calculated results are in accordance with other data.     

High pressure effect on structural and mechanical properties of some LnO (Ln=Sm, Eu, Yb) compounds

The structural and mechanical properties of LnO (Ln=Sm, Eu, Yb) compounds have been investigated using a modified interionic potential theory, which includes the effect of Coulomb screening. We predicted a structural phase transition from NaCl (B₁)- to CsCl (B₂)-type structure and elastic properties in LnO compounds at very high pressure. The anomalous properties of these compounds have been correlated in terms of the hybridisation of f-electrons of the rare earth ion with conduction band and strong mixing of f-states of lanthanides with the p-orbital of neighbouring chalcogen ion. For EuO, the calculated transition pressure, bulk modulus and lattice parameter are close to the experimental data. The nature of bonds between the ions is predicted by simulating the ion-ion (Ln-Ln and Ln-O) distances at high pressure. The second order elastic constants along with shear modulus and Young's modulus, elastic anisotropy and Poisson's ratio are also presented for these oxides.     

Structural and elastic properties of KBr at high pressure and high temperature

To study phase transition and elastic properties at high pressures and high temperatures, we have developed a realistic interaction potential model (RIPZ_pe) including temperature effects. This model is completely suitable for explaining the inter-atomic interaction involved at high temperature and high pressure as it includes the three-body interaction (TBI) and zero point energy effects. The phase transition of KBr crystal at high pressure and high temperatures including the TBI is done for the first time. We have estimated the phase transition pressures, volume collapses and elastic behaviour at various high pressure and high temperatures by RIPZ_pe approach and the results found are well suited with available experimental data.     

Structural stability of TiO and TiN under high pressure

The high pressure phase transition and elastic behavior of Transition Metal Compounds (TiO and TiN) which crystallize in NaCl-structure have been investigated using the three body potential model (TBPM) approach. These interactions arise due to the electron-shell deformation of the overlapping ions in crystals. The TBP model consists of a long range Coulomb, three body interactions, and the short-range overlap repulsive forces operative up to the second neighboring ions. The authors of this paper estimated the values of the phase transition pressures, associated volume collapses, and elastic constants, all of which were found to be closer to available experimental data than other calculations. Thus, the TBPM approach promises to predict the phase transition pressure and pressure variations of elastic constants of Transition Metal compounds.      

Phase transition and high pressure behavior of Zirconium and Niobium carbides

We have predicted the phase transition pressure (P _T )and high pressure behavior of Zirconium and Niobium carbide (ZrC, NbC). The high pressure structural phase transitions in ZrC and NbC has been studied by using a two body inter-ionic potential model, which includes the Coulomb screening effect, due to the semi-metallic nature of these compounds. These transition metal carbides have been found to undergo NaCl (B1) to CsCl (B2)-type structural phase transition, at high pressure like other binary systems. We predict such structural transformation in ZrC and NbC at a pressure of 98GPa and 85GPa respectively. We have also predicted second order elastic constant and bulk modulus. The present theoretical work has been compared with the corresponding experimental data and prediction of LAPW and GGA and LDA theories.      

Structural,mechanical and thermal properties of some Holmium Pnictides under pressure: A theoretical approach

The high pressure structural, elastic and thermal properties of holmium pnictides HoX (X=N, P, As and Bi) were investigated theoretically by using an inter-ionic potential theory with modified ionic charge parameter. We have predicted a structural phase transition from NaCl (B₁) to CsCl (B₂)-type structure at pressure of 139 GPa for HoN, 52 GPa for HoP, 44 GPa for HoAs and 26 GPa for HoBi. Other properties, such as lattice constant, bulk modulus, cohesive energy, second and third-order elastic constants were calculated and compared with the available experimental and theoretical data. In order to gain further information the brittle behaviour of these compounds was observed. Some other properties like Shear modulus (G), Young's modulus (E), Poisson's ratio (ν), anisotropy factor (A), sound velocities, Debye temperature (θ_D) were calculated. The variation of elastic constants (C₁₁ and C₄₄) and Debye temperature (θ_D) with pressure was also presented.     

Pressure-induced phase transition and stability of EuO and EuS with NaCl structure

We have predicted the phase transition pressures and corresponding relative volume changes of EuO and EuS having NaCl-type structure under high pressure using three-body interaction potential (TBIP) approach. In addition, the conditions for relative stability in terms of modified Born criterion has been checked. Our calculated results of phase transitions, volume collapses and elastic behaviour of these compounds are found to be close to the experimental results. This shows that the inclusion of three-body interaction effects makes the present model suitable for high pressure studies.      

First-principles study of elastic and electronic properties of layered ternary nitride SrZrN2 under pressure

The structural, elastic, and electronic properties of SrZrN₂ under pressure up to 100?GPa have been carried out with first-principles calculations based on density functional theory. The calculated lattice parameters at 0?GPa and 0?K by using the GGA-PW91-ultrasoft method are in good agreement with the available experimental data and other previous theoretical calculations. The pressure dependence of the elastic constants and the elastic-dependent properties of SrZrN₂, such as bulk modulus B, shear modulus G, Young's modulus E, Debye temperature Θ, shear and longitudinal wave velocity V_S and V_L, are also successfully obtained. It is found that all elastic constants increase monotonically with pressure. When the pressure increases up to 140?GPa, the obtained elastic constants do not satisfy the mechanical stability criteria and a phase transition might has occurred. Moreover, the anisotropy of the directional-dependent Young's modulus and the linear compressibility under different pressures are analysed for the first time. Finally, the pressure dependence of the total and partial densities of states and the bonding property of SrZrN₂ are also investigated.     

Phase transition in CeSe, EuSe and LaSe under high pressure

The high pressure phase transition and elastic behavior of rare earth monoselenides (CeSe, EuSe and LaSe) which crystallize in a NaCl-structure have been investigated using the three body interaction potential (TBIP) approach. These interactions arise due to the electronshell deformation of the overlapping ions in crystals. The TBP model consists of a long range Coulomb, three body interactions and the short range overlap repulsive forces operative up to the second neighboring ions. The authors of this paper estimated the values of the phase transition pressure and the associated volume collapse to be closer than other calculations. Thus, the TBIP approach also promises to predict the phase transition pressure and pressure variations of elastic constants of lanthanide compounds.      

The first principles study on the Boron antimony compound

We present the results of our calculations on Boron antimony (BSb) compound in zinc-blende (ZB) and rock-salt (RS) structures by performing ab initio calculations within the local density approximation (LDA). Some basic physical properties, such as lattice constant, bulk modulus, cohesive energy, phase transition pressure, second-order elastic constants (C_ij), phonon frequencies, and some band structural parameters are calculated and compared with those obtained with other recent theoretical works. In order to further understand the behaviour of BSb compound, we have also predicted, the pressure-dependent behaviours of the band gap, second-order elastic constants (C_ij), Young's modulus, poison ratios (ν), Anizotropy factor (A), sound velocities, and Debye temperature for this hypothetical compound.     

A polymerization-depolymerization model for generation of contractile force during bacterial cell division

We have investigated the pressure-induced phase transition of NiO and other structural properties using three-body potential approach. NiO undergoes phase transition from B1 (rocksalt) to B2 (CsCl) structure associated with a sudden collapse in volume showing first-order phase transition. A theoretical study of high pressure phase transition and elastic behaviour in transition metal compounds using a three-body potential caused by the electron shell deformation of the overlapping ion was carried out. The phase transition pressure and other properties predicted by our model is closer to the phase transition pressure predicted by Eto et al.      

Structural and magnetic properties of chromium dioxide at high pressures

Ab initio calculations were performed on CrO₂ to study its behavior and possible similarity to silica under high pressures. At the rutile→CaCl₂-type phase transition, the lattice constants, cell volume and total energy change continuously, indicating the second-order nature of the phase transition, consistent with the experimental observations. The current calculations have demonstrated that the rutile→CaCl₂-type phase transition is driven by the softening of the Raman active B_1g mode, weakly coupling with the elastic shear modulus C_s. Further phase transitions of CrO₂ to denser packed phases of α-PbO₂-type and pyrite have been well predicted by total energy calculations. Our electronic calculations revealed that CrO₂ is still a half-metallic ferromagnet up to pressure of 95 GPa. The present results confirm the analogy of the phase sequence between silica and CrO₂ at high pressures.