Microwave‐assisted ring‐opening polymerization of trimethylene carbonate in the presence of ionic liquid

Microwave‐assisted ring‐opening polymerization (MROP) of trimethylene carbonate in the presence of 1‐n‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim]BF₄) ionic liquid was investigated. In the presence of 5 wt % [bmim]BF₄, poly (trimethylene carbonate) (PTMC) with a number‐average molar mass (M_n) of 36,400 g/mol was obtained at 5 W for only 60 min. The M_n of PTMC synthesized in the presence of [bmim]BF₄ was much higher than that produced in bulk at the same reaction time. In addition, compared with those produced by conventional heating, the M_n of PTMC and monomer conversion by MROP with or without [bmim]BF₄ were both higher. Thermal properties of the resulting PTMC were characterized by differential scanning calorimetry. Under microwave irradiation in the presence of ionic liquid, the polymerization could be carried out efficiently and effectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5857–5863, 2007     

三亚甲基环碳酸酯及2,2-二甲基三亚甲基环碳酸酯开环均聚合*

生物降解聚合物聚三亚甲基环碳酸酯（PTMC）及聚2,2-二甲基三亚甲基环碳酸酯（PDTC）在药物控释载体及其它生物医学技术领域有着良好的应用前景。与脂肪族聚酯不同,PTMC、PDTC降解时,不会产生有害的酸性化合物。PTMC、PDTC主要由三亚甲基环碳酸酯（TMC）及2,2-二甲基三亚甲基环碳酸酯（DTC）开环均聚合制备。本文总结了催化TMC、DTC开环均聚合的不同催化剂及其聚合机理,综述了近年来国内外在TMC、DTC均聚合催化剂开发上的研究进展,并对生物相容性催化剂如稀土催化剂、Ca、Mg、Zn、Fe催化剂以及酶催化剂催化TMC、DTC开环聚合的优缺点进行了比较。     

Fabrication of biodegradable poly(trimethylene carbonate) networks for potential tissue engineering scaffold applications

Biodegradable poly(trimethylene carbonate) (PTMC) networks were prepared by photopolymerization of linear (L)‐ and star (S)‐shaped PTMC macromonomers for potential tissue engineering scaffold applications. The L‐ (M_n, 6400) and S‐shaped (M_n, 5880) PTMC macromonomers were synthesized using 1,4‐butane diol and 2‐ethyl‐ 2‐hydroxyl‐propane‐1,3‐diol co‐initiated ring‐opening polymerization of trimethylene carbonate (TMC) in the presence of stannous octoate and subsequent acrylation with acryloyl chloride. Chemical structures of the PTMC macromonomers and their corresponding networks were characterized by ¹H NMR and ¹³C NMR spectroscopy. The human endothelial cell line, EA.hy926 was used to test the biocompatibility, cell adhesion, and proliferation behavior of both PTMC networks. The PTMC networks made from the S‐shaped macromonomers exhibited superior cell adhesion and proliferation behavior than those made of the linear macromonomers. Copyright © 2008 John Wiley & Sons, Ltd.     

Molecular dynamics of a biodegradable biomimetic ionomer studied by broadband dielectric spectroscopy

Broadband dielectric spectroscopy was used to investigate the bulk molecular dynamics of a recently developed biodegradable biomimetic ionomer potentially useful for biomedical applications. Isothermal dielectric spectra were gathered for a phosphoryl choline (PC)-functionalized poly(trimethylene carbonate) (PTMC) ionomer and unfunctionalized PTMC at temperatures ranging from 2 to 60 degrees C over a broad frequency range of 10(-3) to 10(6) Hz. Four relaxations were clearly identified, two of which were shown to stem from the PTMC polymer backbone. A detailed analysis showed that the formation of zwitterionic aggregates was responsible for the material's bulk functionality and that bulk conduction processes may provide useful information for assessing the PC ionomer as a candidate for drug delivery applications. Finally, it was concluded that absorbed water concentrates around the aggregates, resulting in an increased mobility of the PC end-groups.     

RING-OPENING POLYMERIZATION OF TRIMETHYLENE CARBONATE CATALYZED BY NOVEL SINGLE COMPONENT RARE EARTH CALIXARENE COMPLEXES

In this paper, ring-opening polymerization of trimethylene carbonate (TMC) with rare earth (Nd, Y, La) p-tert-butylcalix[n]arene (n=4, 6, and 8) complexes as catalysts has been studied. Poly(trimethylene carbonate) (PTMC) with Mv of 21,400 was produced by bulk polymerization under the conditions as follows: [TMC]0/[Nd] (molar ratio)=1000,80℃,8h. Mechanism study reveals that the polymerization proceeds via a coordination mechanism.     

纳米级固定化猪胰脂肪酶催化三亚甲基碳酸酯的开环聚合研究

以纳米级固定化猪胰脂肪酶(IMPPL)催化三亚甲基碳酸酯(TMC)的开环聚合,研究了IMPPL浓度、聚合反应温度和聚合反应时间对聚三亚甲基碳酸酯(PTMC)分子量和产率的影响.同时也研究了回收再利用的IMPPL对TMC开环聚合的催化作用以及IMPPL对PTMC的降解作用.实验结果表明,IMPPL不仅在60～100℃能有效地催化TMC的开环聚合,而且在较高的温度下IMPPL可以有效地催化PTMC的降解.回收使用的固定化酶可表现较高的催化活性及重复利用性.     

Synthesis and characterization of ABA-type block copolymer of poly(trimethylene carbonate) with poly(ethylene glycol): Bioerodible copolymer

ABA-type block copolymers of poly(trimethylene carbonate) with poly(ethylene glycol) (M_n 6820), PTMC-b-PEG-b-PTMC, were synthesized by the ring-opening polymerization of 1,3-dioxan-2-one (trimethylene carbonate) in the presence of poly-(ethylene glycol) with stannous octoate catalyst, and the copolymers with various compositions were obtained. The PTMC-b-PEG-b-PTMC copolymers were characterized with Fourier transform infrared and nuclear magnetic resonance spectroscopies. The intrinsic viscosities of resulting copolymers increased with the increase of 1,3-dioxan-2-one content in feed while the molar ratio of monomer over catalyst kept constant. It has been observed that the glass transition temperature (T_g) of the PTMC segments in copolymers, recorded from differential scanning calorimetry, was dependent on the composition of copolymers. The melting temperature (T_m) of PEG blocks in copolymer was lower than that of PEG polymer, and then disappeared as the length of PTMC blocks increased. The results of dynamic contact angle measurement clearly revealed that the hydrophilicity of resulting copolymers increased greatly with the increase of PEG content in copolymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 695–702, 1998     

Poly(trimethylene carbonate)/Poly(malic acid) Amphiphilic Diblock Copolymers as Biocompatible Nanoparticles

Amphiphilic polycarbonate–poly(hydroxyalkanoate) diblock copolymers, namely, poly(trimethylene carbonate) (PTMC)‐b‐poly(β‐malic acid) (PMLA), are reported for the first time. The synthetic strategy relies on commercially available catalysts and initiator. The controlled ring‐opening polymerization (ROP) of trimethylene carbonate (TMC) catalyzed by the organic guanidine base 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (TBD), associated with iPrOH as an initiator, provided iPrO?PTMC?OH, which served as a macroinitiator in the controlled ROP of benzyl β‐malolactonate (MLABe) catalyzed by the neodymium triflate salt (Nd(OTf)₃). The resulting hydrophobic iPrO?PTMC‐b‐PMLABe?OH copolymers were then hydrogenolyzed into the parent iPrO?PTMC‐b‐PMLA?OH copolymers. A range of well‐defined copolymers, featuring different sizes of segments (M_n,NMR up to 9300 g mol^?1; Ð_M=1.28–1.40), were thus isolated in gram quantities, as evidenced by NMR spectroscopy, size exclusion chromatography, thermogravimetric analysis, differential scanning calorimetry, and contact angle analyses. Subsequently, PTMC‐b‐PMLA copolymers with different hydrophilic weight fractions (11–75 %) self‐assembled in phosphate‐buffered saline upon nanoprecipitation into well‐defined nano‐objects with D_h=61–176 nm, a polydispersity index <0.25, and a negative surface charge, as characterized by dynamic light scattering and zeta‐potential analyses. In addition, these nanoparticles demonstrated no significant effect on cell viability at low concentrations, and a very low cytotoxicity at high concentrations only for PTMC‐b‐PMLA copolymers exhibiting hydrophilic fractions over 47 %, thus illustrating the potential of these copolymers as promising nanoparticles.     

PEG-PLA block copolymer as potential drug carrier: preparation and characterization

Diblock and multiblock copolymers composed of a poly(D,L-lactide) (PLA) or poly(trimethylene carbonate) (PTMC) core with a hydrophilic chain of poly(ethylene glycol) (PEG) were prepared. These copolymers, in which the core is connected to PEG through a polyfunctional molecule such as citric, mucic, or tartaric acid, may be used to form nanoparticles for drug delivery applications. Branched copolymers were prepared by direct amidation between the polyfunctional acid and methoxy PEGamine, followed by ring-opening polymerization of lactide or trimethyl carbonate to form the PLA and PTMC block copolymers. In addition, a complex multiblock copolymer of biotin-PEG-poly[lactic-co-(glycolic acid)] (PLGA) for application in an avidin-biotin system was prepared for possible design of nanospheres with targeting properties. Studies of drug release from polymeric systems containing multiblock copolymers and studies of polymer degradation were also performed.     

Copolymerization of carbon dioxide and oxetane catalyzed by aluminum porphyrin complex system

Tetraphenylporphinatoaluminum chloride ([TPP]AlCl) catalyst and tetra-n-butylammonium bromide (TBAB) cocatalyst system is effective for the copolymerization of CO₂ and oxetane even under low CO₂ pressure (~2 MPa). In the presence of toluene as a solvent, poly(trimethylene carbonate) (PTMC) containing >99% of carbonate linkages with M_n = 8600 and M_w/M_n = 1.70 was synthesized. This is the first report of PTMC formation with excellent ratio of carbonate linkages from oxetane and CO₂. According to the kinetic analysis, proton nuclear magnetic resonance (¹H NMR) and matrix assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF/MS) measurements of the products, PTMC was mainly synthesized via (i) the trimethylene carbonate (TMC) formation from CO₂ and oxetane and (ii) the successive ring-opening polymerization of TMC.     

Bifunctional imidodiphosphoric acid‐catalyzed controlled/living ring‐opening polymerization of trimethylene carbonate resulting block, α,ω‐dihydroxy telechelic,and star‐shaped polycarbonates

The ring‐opening polymerization (ROP) of trimethylene carbonate (TMC) using imidodiphosphoric acid (IDPA) as the organocatalyst and benzyl alcohol (BnOH) as the initiator has been investigated. The polymerization proceeded without decarboxylation to afford poly(trimethylene carbonate) (PTMiC) with controlled molecular weight and narrow polydispersity. ¹H NMR, SEC, and MALDI‐TOF MS measurements of the obtained PTMC clearly indicated the quantitative incorporation of the initiator at the chain end. The controlled/living nature for the IDPA‐catalyzed ROP of TMC was confirmed by the kinetic and chain extension experiments. A bifunctional activation mechanism was proposed for IDPA catalysis based on NMR and FTIR studies. Additionally, 1,3‐propanediol, 1,1,1‐trimethylolpropane, and pentaerythritol were used as di‐ol, tri‐, and tetra‐ol initiators, producing the telechelic or star‐shaped polycarbonates with narrow polydispersity indices. The well‐defined diblock copolymers, poly(trimethylene carbonate)‐block‐poly(δ‐valerolactone) and poly(trimethylene carbonate)‐block‐poly(ε‐caprolactone), have been successfully synthesized by using the IDPA catalysis system. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1009–1019     

Preparation of block copolymer of poly(trimethylene carbonate) with oligo(ethylene glycol) and the surface properties of the dip coated film

To persuade the stent coating materials for the better sustainable development, a block copolymer composed of hydrophobicity of poly(trimethylene carbonate) (PTMC) and hydrophilicity of PTMC bearing ethylene glycol chains was synthesized as a potential candidate. The result of thermal stability of the polymer was analyzed which reached up to 206 °C (T₁₀) and it is considered that sufficient for sterilization during the treatment. Moreover, the dip coated films of polymer were coated on polyethylene (PE) and stainless steel (SS) substrates in order to stimulate the stability upon the physiological environment. In addition, the preliminary in vitro test of the films were evaluated by protein adsorption and blood platelet adhesion tests. Hence, this study tends to convince that the synthetic block copolymer based on PTMC derivatives were approached for stent coating materials.     

Realization of high performance polycarbonate-based Li polymer batteries

This work describes effective approaches to achieve high cell performance of solid-state Li polymer batteries based on high-molecular-weight poly(trimethylene carbonate) (PTMC). The origin of a gradual capacity increase observed during passive storage and/or active cycling in LiFePO₄|PTMC_xLiTFSI|Li cells was investigated by SEM/EDX, indicating an obvious penetration of the polymer electrolyte through the porous composite electrode at elevated temperatures. Refining the interfacial contacts at the electrode/electrolyte interface by adding PTMC oligomer as an interfacial mediator led to significant capacity enhancement already during initial cycles. Optimized cell performance was achieved through this method rather than other approaches, such as casting electrolyte directly onto the electrode and using a polyether oligomer. Successful long-term cycling stability and rate capability tests also resulted from the suggested strategy.     

Phosphoryl choline introduces dual activity in biomimetic ionomers

Dual activity of phosphoryl choline (PC) functional poly(trimethylene carbonate) (PTMC) was found which induces the zwitterionic biomimetic PC group to form physical cross-links with ionomers in the bulk, and at the same time enrich at the surface of cast films. The formation of zwitterionic domains from a bifunctional PC-PTMC-PC (ionomer) provided firm films with a low elastic modulus in contrast to the tacky PTMC starting material (Mn approximately 3900 g/mol) with poor mechanical performance. In addition, the ionomer possessed improved hemocompatible properties that was explained by the enrichment of PC at the surface, suggesting a way to tailor the mechanical performance of biodegradable PTMC-based ionomers while providing its bioactivity. Tailored elasticity while maintaining hemocompatibility of a biodegradable ionomer should be of particular interest for a variety of in vivo applications.     

Fabrication and characterization of composites composed of a bioresorbable polyester matrix and surface modified calcium carbonate whisker for bone regeneration

This work aims to evaluate the potential of a bioresorbable composite as material for bone regeneration. Surface‐modified calcium carbonate whiskers (CCWs) were prepared by grafting of ethylene glycol (EG) using 1,6‐hexamethylene diisocyanate as coupling agent, followed by ring‐opening polymerization of l ‐lactide initiated by the hydroxyl group of EG. The resulting PLLA‐EG‐g‐CCW was used as filler to reinforce a bioresorbable terpolymer, poly(l ‐lactide‐co‐trimethylene carbonate‐co‐glycolide) (PLTG). The mechanical properties and thermal stability of the PLTG/PLLA‐EG‐g‐CCW composites were greatly improved. Compared with neat PLTG, a 39.3% increase in tensile strength and 26.7% increase in elongation at break were obtained for the composite with 2 wt% PLLA‐EG‐g‐CCW filler. This was assigned to the reinforcement effect of evenly dispersed PLLA‐EG‐g‐CCW in the polymeric matrix. In fact, entanglement of PLLA grafts at the surface of PLLA‐EG‐g‐CCW with PLTG chains results in a homogeneous distribution of the filler in the matrix. Thus, the composites are simultaneously strengthened and toughened. The cytocompatibility of the materials was evaluated from cell morphology and 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assay using L929 mouse fibroblast cell line. The results indicate that the composite presents very low cytotoxicity. Copyright © 2017 John Wiley & Sons, Ltd.     

A novel and versatile potassium‐based catalyst for the ring opening polymerization of cyclic esters

Poly(lactide) (PLA), poly(ε‐caprolactone) (PCL) and poly(trimethylene carbonate) (PTMC) homopolymers of high molecular weight were prepared using potassium‐based catalyst. Polymerizations were carried out in toluene at room temperature. The chemical structure of the polymers was investigated by ¹H and ¹³C NMR. The physical properties investigated by GPC and DSC for the polymers obtained are similar to those prepared using tin octanoate based catalyst. Using a sequential polymerization procedure, PLA‐b‐PCL, PLA‐b‐PTMC, and PCL‐b‐PTMC diblock copolymers were synthesized and characterized in terms of their composition and physical properties. The formation of diblock copolymers was confirmed by NMR and DSC measurements. In vitro cytotoxicity tests have been carried out using MTS assay and the results show the biocompatibility of these polymers in the presence of the fibroblast cells. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5348–5362, 2008     

Novel synthesis method of ester free trimethylene carbonate derivatives

Ester free poly(trimethylene carbonate) (PTMC) derivatives show biocompatibility and biodegradability and do not generate any acidic compounds after decomposition. Their syntheses methods are limited however, hampering their material application. Herein, we established a novel synthesis route of ester free trimethylene carbonate (TMC) derivatives. The novel synthesis route was described using six aldehydes and one ketone as starting compounds. The key reaction is the selective deprotection from two protected hydroxyl groups in the cyclic acetal structure by diisobutylaluminium hydride. This novel synthesis route means that it is possible to convert aldehyde group to ether groups in the side chain of TMC. Conventionally, only a substituent derived from a primary alcohol was introduced into the side chain. We therefore succeeded in decreasing the number of reaction steps from five to three, compared with the conventional route. Furthermore, the development of a novel synthesis route enabled the introduction of substituents derived from secondary alcohols, anticipating the creation of further types of ester free TMC derivatives.     

Sulfur-substitution-enhanced crystallization and crystal structure of poly(trimethylene monothiocarbonate)

In this paper, the crystallization behavior of a novel poly(monothiocarbonate), poly(trimethylene monothiocarbonate) (PTMMTC), was investigated and compared with its polycarbonate analogue, poly(trimethylene carbonate) (PTMC). It is found that PTMMTC exhibits strong crystallizability, while unstretched PTMC is amorphous. DSC and DMA results reveal that PTMMTC possesses higher glass transition temperature (T_g) and β-transition temperature (T_β) than PTMC. Simulation based on density functional theory (DFT) shows that, the bond angle of C-S-C is evidently smaller than that of C-O-C, and thus a larger dipole moment. This leads to the stronger intermolecular interaction and more rigid chain conformation in PTMMTC, which is the origin of sulfur-substitution enhanced crystallization. The crystal structure of PTMMTC was preliminarily determined for the first time. PTMMTC has an orthorhombic crystal structure with a planar zig-zag chain conformation. The parameters of unit cell are a = 10.74 Å, b = 4.79 Å, and c (fiber axis) = 7.74 Å.     

Effect of a Set of Acids and Polymerization Conditions on the Architecture of Polycarbonates Obtained via Ring Opening Polymerization

Polycarbonate‐based polymers with a well‐defined architecture have become interesting materials due to their large range of applications. Ring opening polymerization (ROP) has been largely applied to make branched polycarbonates. The polymer architectures obtained via this method are strictly related with the polymerization mechanisms involved which depend on the polymerization conditions chosen. Hereby, we evaluate the catalytic activity of three acids, fumaric, trifluoroacetic, and methanesulfonic on the Cationic ROP of trimethylene carbonate (TMC) over a trifunctional initiator, trimethylol propane (TMP), under different reaction conditions. In‐detail characterization of the polymers showed the co‐existence of two polymerization mechanisms: the activated monomer (AM), which produces a tri‐armed branched polycarbonate with inclusion of the TMP initiator (TMP‐PTMC), and a combined AM/Activated Chain End (ACE) mechanism, which produces a linear polycarbonate (L‐PTMC). Such mixtures were identified for nearly all the reaction variables investigated, together with other side reactions. Upon optimization of the synthesis, the polymerizations in toluene with TFA at 35 °C and equimolar acid/initiator ratio were optimal, avoiding side reactions, but still resulting in a polymer mixture composed of ～69% TMP‐PTMC and 31% of a polycarbonate linear polymer. The occurrence of such mixed polymer architectures is commonly overlooked in literature regarding CROP of branched polycarbonates. We demonstrate the importance of performing a full characterization for a successful detection of polymer mixtures having different (number of) end‐functionalities, which are critical for further use in advanced applications, such as in the biomedical or pharmaceutical filed. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1502–1511     

Highly efficient metal‐free organic catalysts to design new Environmentally‐friendly starch‐based blends

A one‐step process is reported to directly synthesize blends of poly(trimethylene carbonate) (PTMC) with a modified granular starch. Trimethylene Carbonate (TMC) ring‐opening polymerization is performed in the presence of native starch particles in bulk conditions at 150 °C and the efficiency of metal‐free organic catalysts (TBD and phosphazene superbases P1‐t‐Oct, P2‐t‐bu, and P4‐t‐bu) are investigated to replace the organo‐metallic stannous octanoate initiator. TMC monomer is successively converted into PTMC and the robustness of organic catalysts is highlighted with significant activities at very low concentrations (<100 ppm), where stannous octanoate is inefficient. Reactivity of starch toward TMC ROP is deeply investigated by NMR techniques and a starch‐graft‐PTMC is indirectly evidenced. Starch substitution degree reaches 0.9% indicating that PTMC grafting only occurs at the surface of swollen granular starch. PTMC graft length from the starch surface remained low in the range 2–12 and model ROP reactions highlight the role of TMC hydrolysis on PTMC graft length. Despite low PTMC grafts, a fine dispersion of intact starch particles into the PTMC matrix is evidenced. Consequently, metal‐free organic catalysts at low concentrations are promising candidates for synthesizing blends of PTMC with high loadings of surface‐modified starch (32% by weight) in 2 min within a one‐step process. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 493–503