离子色谱测定口腔含漱剂中的多种成分

建立了离子色谱法对口腔含漱剂中抗龋剂如氟离子、单氟磷酸根、甘油磷酸根、防腐剂山梨酸、甜味剂糖精以及氯离子、硫酸根、磷酸根等同时测定的方法。采用AS11色谱分析柱和KOH梯度淋洗,抑制电导检测。被测物质的保留时间和峰面积重现性分别小于1.51%和6.02%;被测物的线性相关系数为0.9990~0.9999;加标回收率为89.4%~102.5%。本方法可用于商品化含漱剂和牙棒液体多种组分的同时测定。     

A novel anthracene-based receptor: Highly sensitive fluorescent and colorimetric receptor for fluoride

A new highly sensitive colorimetric receptor 1 for fluoride based on anthracene-9,10-dicarbaldehyde bis-p-nitrophenylhydrazone was designed, synthesized and characterized. Experiments showed that the receptor 1 can selectively recognize the fluoride in DMSO and even in 95/5 DMSO/H₂O (v/v) mixtures. The ability of recognition and the bond between receptor 1 and anions were determined using visual inspection, UV-vis and fluorescence analyses. In addition, ¹H NMR experiments were carried out to explore the nature of interaction between receptor 1 and fluoride. Finally, analytical application and detection of fluoride in toothpaste have been studied.     

Supramolecular chemistry approach to the design of a high-resolution sensor array for multianion detection in water

Reliable sensing of structurally similar anions in water is a difficult problem, and analytical tests and sensor devices for reliable sensing of multiple anions are very rare. This study describes a method for fabrication of simple colorimetric array-based assays for aqueous anion solutions, including complex analytes encountered in real-life applications. On the fundamental level, this method shows how the discriminatory capacity of sensor arrays utilizing pattern recognition operating in multianalyte environments may be dramatically improved by employing two key features. The synergy between the sensor and hydrogel host resembles the cooperative effects of an apoenzyme and cofactor: the host hydrogel helps extract the target anions from the bulk analyte while stripping the solvate molecules off the anions. In addition, the supramolecular studies of the affinity and selectivity of the potential sensors for target analytes allow for constructing an array predesigned for a particular analyte. To illustrate both aspects, an eight-sensor array utilizing colorimetric sensor materials showing selectivity for fluoride and pyrophosphate while displaying significant cross-reactivity for other anions such as carboxylates, phosphate, or chloride was used to differentiate between 10 anions. The quantitative analyses were also performed to show that the eight-sensor array was found to operate across 4 orders of magnitude concentrations (0.20-360 ppm; 10 microM to 20 mM). The applicability of this approach was demonstrated by analyzing several toothpaste brands. The toothpastes are complex analytes comprising both known and unknown anions in various concentrations. The fluoride-selective yet cross-reactive array is shown to utilize the fluoride content as the main differentiating factor while using the remaining anionic components for further differentiation between toothpaste brands.     

Test‐Strip‐Based Fluorometric Detection of Fluoride in Aqueous Media with a BODIPY‐Linked Hydrogen‐Bonding Receptor

The measurement of biologically relevant anions, such as fluoride, is an important task in analytical chemistry, in particular, for dental health and osteoporosis. Although a large number of fluoride probes are known, the applicability under relevant conditions is limited to a few examples. To improve this situation, BODIPY‐amidothiourea dyes with varying hydrogen‐bond donating strengths were developed, the most H‐acidic of which ( 1 c ) could detect F^? from an inorganic source (NaF) in 50 % aqueous solution (DMSO/water 1:1, v/v) with 0.01 ppm sensitivity through selective fluorescence quenching by a photoinduced electron‐transfer (PET) process. Use of the probe and a reference dye with a test‐strip assay and a portable and rapidly recording lateral‐flow fluorescence reader made determination of F^? in neat aqueous solutions, such as spiked water samples and toothpaste extracts, possible in a self‐referenced manner, achieving a detection limit of 0.2 ppm.     

Cathodic adsorptive stripping voltammetry of nickel complexed with hydroxynaphthol blue at a static mercury drop electrode

A new method is described for the determination of Ni based on the cathodic adsorptive stripping of Ni(II) complexed with hydroxynaphthol blue (HNB) at a static mercury drop electrode. Optimal conditions were found to be: accumulation potential -0.50 V (vs. Ag/AgCl); final potential -1.10 V; accumulation time 50 sec; scan rate 200 mV/sec; linear scan mode; filter 0.1 sec; supporting electrolyte acetic acid/acetate (0.25M, pH = 6.0) and concentration of HNB 3.3 x 10(-5)M. The response of the system was found to be linear in a range of Ni concentrations from 25 ppb to the detection limit. The detection limit was found to be 1.7 nM (0.10 ppb) with 2 mins of accumulation time. The effect of various potential interferences (including a variety of cations, anions and organic surfactants) were also studied. With the exception of Co, at less than equimolar concentrations no significant interferences were observed. Al was found to interfere at high concentrations with respect to Ni, but Al concentrations up to 1000 ppb may be masked by sodium citrate or sodium fluoride. The utility of the method is demonstrated by the recovery of Ni in a doped sample of commercial mineral water.     

Simultaneous capillary electrophoretic separation of small anions and cations after complexation with ethylenediaminetetraacetic acid

A new approach for simultaneous separation of small inorganic and organic anions and metal cations by capillary electrophoresis is demonstrated. Metal cations in the sample are transformed into their chelates with EDTA and are separated together with the anions using an anionic separation mode. Simultaneous separation of 19 common anions and cations was achieved in about 6 min with the electrolyte containing 5 mM K2CrO4, 3 mM boric acid, 35 microM cetyltrimethylammonium bromide and 12 microM EDTA at pH 8. Limits of detection (s/n = 3) were in the range from 4 ppb for Cl- up to 1250 ppb for Cu-EDTA and RSDs of peak areas ranged from 1.4% for Cl- up to 8.5% for Mn-EDTA chelate. The practical applicability of the method was demonstrated on the analysis of anions and cations in various water samples.     

Development and validation of analytical methodology using capillary electrophoresis for separation and determination of anions in rainwater

A new capillary electrophoresis (CE) procedure was developed for simultaneous determination of both organic and inorganic anions in rain water using a background electrolyte (BGE) containing 5 mM molybdate, 0.15 mM CTAH, 0.01% PVA and 5 mM Tris buffer to adjust pH at 7.9. Under optimised conditions, good repeatability (RSD for sulphate in migration time=0.36% and peak area=4.2%), low detection limit (2 ppb for chloride) and satisfactory working range (50 ppb-20 ppm for hydrodynamic injection, 10 ppb-3 ppm for electrokinetic injection for chloride) were obtained. The reliability of the CE procedure developed was established by satisfactory recovery tests and good agreement of results obtained by both the CE and ion chromatography (IC) methods. The procedure developed had been successfully applied for field monitoring of rainwater showing good repeatability and capability of detecting trace anions at ppb levels beyond the IC working range. Thus, the new CE procedure developed provides a quick, sensitive, economic and reliable method to meet the need for the simultaneous determination of both organic and inorganic anions in the acid rain monitoring programme.     

Simultaneous detection of monovalent anions and cations using all solid-state contact PVC membrane anion and cation-selective electrodes as detectors in single column ion chromatography

The overall efficiency of ion chromatographic procedures allows the possibility of routine separation and detection of common inorganic and organic anions and cations at low levels in a simultaneous system. A simple and rapid independent separation, and sensitive simultaneous detection of monovalent common anions and cations were achieved using 2 mM copper sulfate, (at pH: 5.40), as eluent with low cell-volume potentiometric detectors. This was established using all-solid state contact, tubular, PVC-matrix membrane anion and cation-selective electrodes in series as detectors with mixed-bed ion-exchange column in ion chromatography. The developed method is reproducible and highly selective to monovalent anions and cations, and takes less than 8 min. Under all operation conditions, the detection limits of the developed method, for potassium, rubidium, cesium, thallium(I), nitrite, nitrate, benzoate and bromide, were of the order of tens of ppb, for sodium, ammonium, chloroacetate, cyanate and chloride ions, values were of the order of hundreds of ppb for an injected volume of 20 mul. The method was flexible since most of anions do not interfere the detection of cations and most of cations do not affect the detection of anions, so that the method can be applied to many sample types e.g. environmental. The application of the method for river, sea and tap water samples were illustrated.     

Novel fluorogenic probe for fluoride ion based on the fluoride-induced cleavage of tert-butyldimethylsilyl ether

A highly sensitive and selective fluorogenic probe for fluoride ion, 4-methylumbelliferyl tert-butyldimethylsilyl ether (4-MUTBS), was designed and synthesized. 4-MUTBS was a weakly fluorescent compound and was synthesized via the one-step reaction of 4-MU with tert-butyldimethylsilyl chloride. Upon incubation with fluoride ion in acetone-water solution (7:3, v/v), the Si-O bond of 4-MUTBS was cleaved and highly fluorescent 4-methylumbelliferone (4-MU) was released, hence leading to the fluorescence increase of the reaction solution. The fluorescence increase is linearly with fluoride concentration in the range 50-8000 nmol l(-1) with a detection limit of 19 nmol l(-1) (3sigma). Because of the high affinity of silicon toward fluoride ion, the proposed probe shows excellent selectivity toward fluoride ion over other anions. The method has been successfully applied to the fluoride determination in toothpaste and tap water samples.     

Simultaneous determination of fluoride and monofluorophosphate in toothpastes by supressed ion chromatography

Suppressed ion chromatography with a highly selective and high capacity anion-exchange column is used for the determination of anionic compounds in ten commercially available toothpastes. Minimal sample preparation is needed, requiring only dilution and filtration over a solid-phase extraction cartridge. Quantitative analysis of fluoride and monofluorophosphate, as well as chloride, nitrate, orthophosphate, and sulfate is achieved in one chromatographic run with a total analysis time of 25 minutes. Optimized analytical conditions are validated in terms of accuracy, precision, and total uncertainty, and the results demonstrate the reproducibility of ion chromatography. The coefficient of determination for the anions ranges from 0.9896 to 0.9997. The spiked recoveries for the anions are 88–108%. The change in the fluoride content of the toothpaste with storage time is investigated.     

Determination of Silicate By Nonsuppressed Ion Chromatography

Abstract

In previous papers the authors reported that nonsuppressed ion chromatography using potassium hydroxide solution as an eluent was a very sensitive and effective method for the analysis of anions and that this method could be applied to the determination of anions in environmental water samples.

In this paper, this method was applied to the determination of silicate without the interference of fluoride ion when using 0.5mM potassium hydroxide solution, Moreover, this method was compared with silicomolybdate methods and good agreement was obtained between these two methods.

The percent standard deviation was 5.5% when determining lppm of silicate and the calibration curve was linear at concentrations less than 2.5ppm. The detection limit was less than 50ppb.     

Simultaneous ion-exclusion/cation-exchange chromatography of anions and cations in acid rain waters on a weakly acidic cation-exchange resin by elution with sulfosalicylic acid

A simple, selective, and sensitive method for the simultaneous determination of anions (sulfate, nitrate, and chloride) and cations (sodium, ammonium, potassium, magnesium, and calcium) in acid rain waters was developed using ion-exclusion/ cation-exchange chromatography with conductimetric detection. A weakly acidic cation-exchange resin column (Tosho TSKgel OA-PAK-A) and a sulfosalicylic acid-methanol-water eluent was used. With a mobile phase comprising 1.25 mM sulfosalicylic acid in methanol-water (7.5:92.5) at 1.2 ml/min, simultaneous separation and detection of the above anions and cations was achieved in about 30 min. Linear calibration plots of peak area versus concentration were obtained over the concentration ranges 0-1.0 mM for anions (R=0.9991) and 0-0.5 mM for cations (R=0.9994). Detection limits calculated at S/N=3 ranged from 4.2 to 14.8 ppb for the anions and from 2.4 to 12.1 ppb for the cations. The reproducibility of retention times was 0.14-0.15% relative standard deviation (RSD) for anions and 0.18-0.31% for cations, and reproducibility of chromatographic peak areas was 1.22-1.75% RSD for anions and 1.81-2.10% for cations. The method was applied successfully to the simultaneous determination of anions and cations in aerosols transported from mainland China to central Japan, as determined by a meteorological satellite data analyzer.     

离子色谱-柱切换法测定土壤浸出液中的氟离子

建立了离子色谱-柱切换测定土壤浸出液中氟离子的方法。使用柱切换技术,将样品通过高聚物反相色谱柱进行在线预处理,分离氟离子和小分子有机酸,同时除去水溶性有机杂质,采用收集环收集氟离子并进入分析系统分析,消除了测定氟离子时普遍存在的干扰问题。分析系统的淋洗液为KOH溶液,流速为1.0 mL/min,采用抑制性电导检测,外标法定量。氟离子的线性范围为0.05~10.0 mg/L,相关系数为0.9999,加标回收率为103.4%~105.3%,相对标准偏差为2.0%~2.1%,检出限 (S/N=3)为5.50 μg/L。该方法适用于测定复杂基体样品中的氟离子。     

ESCA-Analysis of tin compounds on the surface of hydroxyapatite

The formation of tin compounds on the surface of hydroxyapatite, the main crystalline component of teeth, is discussed controversially. SnF₂ is used as an anticaries agent in toothpaste preparations. Pure hydroxyapatite (HAP) is treated with extracts of commercially available toothpastes containing tin fluoride and analyzed by electron spectroscopy (ESCA). Survey spectra and depth profiles are recorded. The chemical shifts measured for the HAP samples are compared with those of standard tin compounds. It is concluded that on the surface of hydroxyapatite a mixture of two-valent fluoro-phosphato compounds is formed. SnO is not found in the mixture.     

Fluoride ion detection by 8-hydroxyquinoline-Zr(IV)-EDTA complex

A simple fluorescent detection based on the ligand exchange mechanism is proposed for the fluoride ion in aqueous media. This procedure is based on the exchange of 8-hydroxyquinoline (oxine) coordinated to Zr(IV) by fluoride ion without interference from other common anions. The ternary complex of oxine with [Zr(H(2)O)(2)EDTA].2H(2)O formed by replacing two water molecules in aqueous solution provides a sensitive signalling system for fluoride ion in the concentration range from 6 x 10(-7)M to 8 x 10(-4)M. The green fluorescence (lambda(max)=532 nm) exhibited by the complex upon excitation at 247 nm decreases in intensity with fluoride addition with a detection limit of 12 ppb. The complexation reaction between oxine and Zr(IV)-EDTA and the ligand exchange reaction with fluoride ion has been investigated by UV-vis and fluorescence spectroscopies combined with the PM3 semi-empirical quantum chemical calculations. Job's method of continuous variation and the molar ratio method ascertain a 1:1 stoichiometry composition of the chelate in aqueous media.     

Determination of fluoride in toothpaste using headspace solid-phase microextraction and gas chromatography-flame ionization detection

A new method for determination of fluoride in toothpaste employing the headspace solid-phase microextraction (HS-SPME) followed by gas chromatography/flame ionization detection (GC/FID) has been proposed. It is a development of the method for determination of fluoride using trimethylchlorosilane (TMCS) as the derivatization reagent to form trimethylfluorosilane (TMFS), with the liquid/liquid extraction (LLE) step replaced by HS-SPME. To introduce the latter, it was necessary to determine the conditions of the reaction and to optimize the two stages of the SPME procedure: extraction and desorption. The parameters of the SPME analysis using carboxen/polydimethylsiloxane (CAR/PDMS) fiber were defined and compared with the corresponding ones for the LLE method, used as a reference. Also, these two methods were compared with respect to their linearity, precision, and accuracy. Results from toothpaste analyses using these two methods were highly correlated, indicating the potential to use the SPME extraction as an inexpensive and solventfree alternative to the LLE method.     

Determination of anions with capillary electrophoresis and indirect ultraviolet detection

A method is validated for the determination of anions with capillary electrophoresis (CE) in combination with indirect UV detection. The method described here is used for the analysis of eight of the most common anions (fluoride, chloride, bromide, sulphate, nitrate, nitrite, thiosulphate and phosphate). Next, the method is compared with a another buffer system for the determination of anions with CE and indirect UV detection. Typical limits of detection are obtained between 1 and 3 mg/l for the above-mentioned compounds. The repeatability and reproducibility of the system differs per compound and is, with the exception of fluoride and phosphate, between 4 and 6% and 5–10%, respectively. Linearity was observed between 1 and 10 mg/l. The method is applied for the determination of anions in drinking water, serum and urine.     

Rapid screening of inorganic and organic anions in liquid by‐products from hydrothermal treatment of biomass by capillary electrophoresis

A simple and rapid capillary electrophoresis method with capacitively coupled contactless conductivity detection (CE‐C⁴D) for the simultaneous determination of inorganic and organic anions in liquid product obtained from the hydrothermal treatment of biomass residues is presented. Under the optimal analytical conditions, limits of detection ranged from 1.8 to 9.4 μM for most target solutes and 53 μM for citrate. Relative standard deviations were below 0.5% for migration times and within 0.6–6.5% for peak areas for all solutes. The proposed method was successfully applied for the rapid determination and screening of inorganic and organic anions in liquid product produced following differing hydrothermal treatment temperatures for banana and pineapple biomass, and the contribution of organic acid formation to acidity in the liquid was evaluated. CE‐C⁴D could be a suitable method for the optimization or tailoring of HTT conditions for desired liquid product composition, and additionally for determination of the best variety(s) of biomass to use in such processes.     

Electrospray ionization-ion mobility spectrometry: a rapid analytical method for aqueous nitrate and nitrite analysis

This paper reports the first example of electrospray ionization (ESI) for the separation and detection of anions in aqueous solutions by ion mobility spectrometry (IMS). Standard solutions of arsenate, phosphate, sulfate, nitrate, nitrite, chloride, formate, and acetate were analyzed using ESI-IMS and distinct peak patterns and reduced mobility constants (K(0)) were observed for respective anions. Real world water samples were analyzed for nitrate and nitrite to determine the feasibility of using ESI-IMS as a rapid analytical method for monitoring nitrate and nitrite in water systems. The data showed satisfactory correlation between the measured value ([similar]0.16 ppm) and the reported maximum nitrate-nitrogen concentration (0.2 ppm) found in a local drinking water system. For on-site measurement applications, direct sample introduction and air as an alternate drift gas to nitrogen were evaluated. The identities of the nitrite and nitrate mobility peaks were verified by comparison of reduced mobility constants with mass identified nitrate and nitrite ions reported in literature. In the mixing ratio, a linear dynamic range of 3 orders of magnitude and instrument detection limits of 10 ppb for nitrate and 40 ppb for nitrite were obtained. The calibration curves showed r(2) value of 0.98 and slope of 0.06 for nitrate and r(2) value of 0.99 and slope of 0.11 for nitrite.     

抑制动力学荧光法测定痕量氟

在酸性介质中,利用氟离子对Fe(Ⅲ）催化H2O2氧化罗丹明6G使其荧光猝灭的抑制作用,建立了动力学荧光法测定痕量氟离子新方法,方法的线性范围为0.020-0.180μg/mL,检出限为8.70ng/mL。本法已用于牙膏中氟的含量测定。