Microchip electrospray: cone-jet stability analysis for water-acetonitrile and water-methanol mobile phases

Changes in mobile phase composition during high performance liquid chromatography (HPLC) gradient elution coupled to mass spectrometry (MS) sensitively affect electrospray operation modes. In this work, we identify the influences of dynamic changes in bulk conductivity on the cone-jet stability island for aqueous acetonitrile and aqueous methanol mobile phases commonly used in reversed-phase HPLC. Bulk conductivities of the mobile phases were varied by adding different amounts of formic acid. A commercial microchip-HPLC/ESI-MS configuration was modified to enable in situ electrospray diagnostics by frequency analysis of the microchip emitter current and spray imaging. This approach facilitated the detection of different spray modes together with their onset potentials. The established spray modes are described and the differences in onset potentials and stability regions explained by the physicochemical properties of the electrosprayed liquid.     

二维液相色谱-质谱联用分离中药复方葛根芩连汤中的有效成分

建立了二维液相色谱-质谱联用方法分离中药复方葛根芩连汤的成分。以CN柱作第一维色谱柱,水和甲醇梯度洗脱分离;以ODS柱作第二维色谱柱,20 mmol/L乙酸铵缓冲液和乙腈梯度洗脱分离;质谱检测采用电喷雾电离/大气压化学电离（ESI/APCI）复合离子源,正负离子扫描。实验结果表明搭建的二维液相色谱的峰容量显著高于一维色谱,分离效率得到了明显的提高。以第一维色谱的第3个流分为例,对其二维分离进行仔细分析,发现质谱比紫外光谱检测到的组分多,质谱中采用负离子模式比正离子模式检测到的组分多。表明搭建的二维液相色谱-质谱分离平台分离效果好,提高了液相色谱的峰容量和分离效率。该方法操作简便,可作为中药等复杂体系分离分析的有效手段。     

Nozzle and liquid effects on the spray modes in nanoelectrospray

Unforced nanoelectrospray can exhibit a number of stable spray modes. These include low frequency pulsations, high frequency pulsations, and a steady cone-jet. Experiments are reported here on such pulsations that have been observed in various salt loaded solutions of ethylene glycol, triethylene glycol and water. The spray current was monitored with 1 mus time resolution to show that spray regime characteristics depend on nozzle diameter and liquid conductivity. The frequency of pulsations was found to increase with both increased liquid conductivity and decreasing nozzle diameter. The charge ejected during a pulse is lower for smaller nozzles spraying higher conductivity liquids. Water solutions were observed undergoing high frequency pulsations, with these pulsations often occurring in lower frequency bursts. The frequencies of water pulsations were as high as 635 kHz but the charge ejected by each pulsation was an order of magnitude lower than that observed in triethylene glycol. An unforced electrospray of water was also identified as being in the steady cone-jet mode with a higher degree of confidence than previously. The values for stable pulsation frequency and charge ejected observed in ethylene glycol lay between those of TEG and water.     

Novel experimental arrangement developed for direct fullerene analysis by electrospray time-of-flight mass spectrometry

A novel electrospray setup was found effective for direct analysis of fullerene solutions by electrospray (ES) mass spectrometry. The electrospray capillary needle used for the analysis is equipped with a thin metal (copper, platinum or stainless steel) wire installed inside the capillary. The wire tip protrudes slightly from the capillary end. In this configuration the high electrical field formed by the wire tip stimulates a specific electrospray mode with a fine spray originating from the tip. The correlation of the acquired mass spectra with the magnified view of the spray at the capillary tip was investigated. The effective formation of fullerene ions in both negative and positive ion modes was observed in mass spectra only in the specific case of the electrospray originating from the wire tip. The fullerene di-anions observed in the negative ES mass spectra provide evidence for the electrochemical nature of this process occurring at the ES capillary tip. Observation of fullerene ions in mass spectra obtained using the suggested electrospray arrangement is assumed to be a consequence of the fine spray originating from the sharp metal wire tip. In this case the liquid/metal interface is near the Taylor cone apex.     

Electrohydrodynamics of charge separation in droplet-based ion sources with time-varying electrical and mechanical actuation

Charge transport and separation in mechanically-driven, droplet-based ion sources are investigated using computational analysis and supporting experiments. A first-principles model of electrohydrodynamics (EHD) and charge migration is formulated and implemented using FLUENT CFD software for jet/droplet formation. For validation, classical experiments of electrospraying from a thin capillary are simulated, specifically, the transient EHD cone-jet formation of a fluid with finite electrical conductivity, and the Taylor cone formation in a perfectly electrically-conducting fluid. The model is also used to investigate the microscopic physics of droplet charging in mechanically-driven droplet-based ion sources, such as array of micromachined ultrasonic electrospray (AMUSE). Here, AMUSE is subject to DC and AC electric fields of varying amplitude and phase, with respect to a time-varying mechanical force driving the droplet formation. For the DC-charging case, a linear relationship is demonstrated between the charge carried by each droplet and an applied electric field magnitude, in agreement with previously reported experiments. For the AC-charging case, a judiciously-chosen phase-shift in the time-varying mechanical (driving ejection) and electrical (driving charge transport) signals allows for a significantly increased amount of charge, of desired polarity, to be pumped into a droplet upon ejection. Complementary experimental measurements of electrospray electrical current and charge-per-droplet, produced by the AMUSE ion source, are performed and support theoretical predictions for both DC- and AC-charging cases. The theoretical model and simulation tools provide a versatile and general analytical framework for fundamental investigations of coupled electrohydrodynamics and charge transport. The model also allows for the exploration of different configurations and operating modes to optimize charge separation in atmospheric pressure electrohydrodynamic ion sources under static and dynamic electrical and mechanical fields.     

High-frequency AC electrospray ionization source for mass spectrometry of biomolecules

A novel high-frequency alternating current (AC) electrospray ionization (ESI) source has been developed for applications in mass spectrometry. The AC ESI source operates in a conical meniscus mode, analogous to the cone-jet mode of direct current (DC) electrosprays but with significant physical and mechanistic differences. In this stable conical-meniscus mode at frequencies greater than 50 kHz, the low mobility ions, which can either be cations or anions, are entrained within the liquid cone and ejected as droplets that eventually form molecular ions, thus making AC ESI a viable tool for both negative and positive mode mass spectrometry. The performance of the AC ESI source is qualitatively shown to be frequency-dependent and, for larger bio-molecules, the AC ESI source produced an ion signal intensity that is an order of magnitude higher than its DC counterpart.     

Effect of methanol quality on the ionisation of herbicides,insecticides and fungicides using gradient elution liquid chromatography

This paper explores the changes in the electrospray signal response of 39 structurally different compounds caused by the quality of the methanol, when used as a component in a gradient elution mobile phase. When three batches of LC–MS grade methanol from one manufacturer were evaluated, the largest variation in the electrospray signal responses of the 39 compounds examined was 18%. However, significant enhancement of the electrospray signals of up to 106% were observed among different brands of LC–MS grade methanol from different manufacturers. The effect of methanol quality on signal response was found to be compound dependent. This study also demonstrated that the senescence of the methanol was important. Using an expired batch of LC–MS grade methanol, electrospray signals were suppressed by as much as 95% for all compounds measured using positive mode electrospray. Conversely, the negative mode electrospray signals of compounds such as 4-octyl benzoic acid showed an enhancement of up to 96% when using the same batch of methanol. Linuron was used as a model compound to examine the change in the electrospray response, during gradient elution, when the proportion of an expired batch of methanol was varied. An infusion experiment showed that the linuron signal intensity decreased as the proportion of expired methanol increased in the mobile phase, which was in direct contrast to the increase in linuron signal observed with a non-expired batch of methanol. A series of isocratic experiments also showed that the linuron signal decreased as the proportion of expired methanol increased in the mobile phase. The ion ratios of several of the compounds studied changed significantly when using the expired batch of LC–MS methanol. The change in the ion ratios accentuates the difficulty of identifying compounds from in-source spectral libraries. A protocol is recommended for assessing the quality of methanol for LC–MS applications.     

液相色谱-串联质谱法测定食品中甲基磺草酮

食品用乙腈-水(3+1)溶液进行提取,经凝胶色谱、固相萃取柱净化后,用液相色谱-串联质谱法进行测定和确证,外标法定量。色谱分离用甲醇和甲酸-水(0.1+99.9)溶液以不同体积比混合为流动相梯度洗脱,采用负离子模式电喷雾离子源在多反应监测模式下进行检测。甲基磺草酮的质量浓度在0.01~0.2 mg·L-1范围内与其峰面积呈线性关系。以4种食品样品为基体,加入3种浓度水平的甲基磺草酮标准做回收试验,测得回收率在73.2%~100.6%之间;测定值的相对标准偏差(n=10)在4.1%~11%之间。     

肉豆蔻中赭曲霉毒素的测定及赭曲霉毒素产毒菌的分离鉴定

建立了同时测定肉豆蔻中3种赭曲霉毒素的超高效液相色谱-串联质谱法(UPLC-MS/MS)。样品经70%甲醇超声提取,HLB柱净化,采用Agilent Proshell 120 EC C₁₈色谱柱,以乙腈(含0.1%甲酸)-水(含0.1%甲酸)为流动相进行梯度洗脱,于电喷雾离子源正负离子模式下多反应监测模式检测。结果表明,肉豆蔻基质中3种赭曲霉毒素基质效应为91.0%~112.0%,采用基质匹配标准曲线法定量时各浓度范围下线性关系良好(R²>0.999)。样品在高、中、低3个浓度加标水平下,回收率为63.3%~88.4%,相对标准偏差(RSD)小于6.0%,检出限(LOD)和定量限(LOQ)分别为0.1~1.0μg/kg和0.3~3.0μg/kg。另从肉豆蔻中分离得到一株产毒菌,采用紫外荧光筛选、形态学鉴定、DNA测序结合液质联用检测的方法最终鉴定为菌核曲霉。     

Silica-based monoliths for rapid peptide screening by capillary liquid chromatography hyphenated with electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

Capillary liquid chromatography based on particulate and monolithic stationary phases was used to screen complex peptide libraries by fast gradient elution coupled on-line to electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICRMS). A slightly modified commercial electrospray interface consisting of a fused-silica transfer capillary and low dead volume stainless steel union at which the electrospray voltage was grounded enabled the effluent of all the capillary columns to be directly sprayed into the mass spectrometer. Stable electrospray conditions were generated over a wide range of mobile phase compositions, alleviating the need for a tapered end of the spray capillary, pneumatic assistance or preheated nebulizer gas. Since the identification of complex samples containing numerous isobaric substances is facilitated by chromatographic separation prior to mass spectrometry, stationary phase materials have been employed which offer a fast, efficient elution and, due to the complexity of samples, a high loading capacity. Silica-based monolithic capillary columns combine these three characteristics in a unique manner due to a tailored adjustment of both macro- and mesopore sizes in the highly porous silica structure. As we demonstrate by a comparative study of the silica-based monolithic and packed capillaries for LC/MS analysis of complex peptide libraries, silica monoliths show superior performance over packed beds of small-diameter particles with respect to analysis time and separation efficiency. Libraries with more than 1000 different peptides could be screened in less than 20 min.     

Stationary and mobile phases in hydrophilic interaction chromatography: a review

Hydrophilic interaction chromatography (HILIC) is valuable alternative to reversed-phase liquid chromatography separations of polar, weakly acidic or basic samples. In principle, this separation mode can be characterized as normal-phase chromatography on polar columns in aqueous-organic mobile phases rich in organic solvents (usually acetonitrile). Highly organic HILIC mobile phases usually enhance ionization in the electrospray ion source of a mass spectrometer, in comparison to mobile phases with higher concentrations of water generally used in reversed-phase (RP) LC separations of polar or ionic compounds, which is another reason for increasing popularity of this technique. Various columns can be used in the HILIC mode for separations of peptides, proteins, oligosaccharides, drugs, metabolites and various natural compounds: bare silica gel, silica-based amino-, amido-, cyano-, carbamate-, diol-, polyol-, zwitterionic sulfobetaine, or poly(2-sulphoethyl aspartamide) and other polar stationary phases chemically bonded on silica gel support, but also ion exchangers or zwitterionic materials showing combined HILIC-ion interaction retention mechanism. Some stationary phases are designed to enhance the mixed-mode retention character. Many polar columns show some contributions of reversed phase (hydrophobic) separation mechanism, depending on the composition of the mobile phase, which can be tuned to suit specific separation problems. Because the separation selectivity in the HILIC mode is complementary to that in reversed-phase and other modes, combinations of the HILIC, RP and other systems are attractive for two-dimensional applications. This review deals with recent advances in the development of HILIC phase separation systems with special attention to the properties of stationary phases. The effects of the mobile phase, of sample structure and of temperature on separation are addressed, too.     

Capillary column supercritical fluid chromatography-atmospheric pressure ionisation mass spectrometry interface performance of atmospheric pressure chemical ionisation and electrospray ionisation.

A supercritical fluid chromatography interface probe for atmospheric pressure ionisation mass spectrometry (API-MS) with the advantage of convenient switch between ionisation modes [atmospheric pressure chemical ionisation (APCI) and electrospray ionisation (ESI)] has recently been reported [P.J.R. Sj?berg, K.E. Markides, J. Chromatogr. A, 785 (1997) 101]. In order to obtain a stable ion signal and a low minimum detectable quantity, the design of the spray devise has to be optimised. For easy optimisation in the APCI mode, the corona needle was mounted directly on the interface probe. To compensate for the adiabatic cooling of the expanding mobile phase in the APCI mode, a heated region around the restrictor tip was used. In comparison, ESI required no additional heat, which might also prevent fragmentation for thermolabile compounds. As the mobile phase used was neat CO2, a low flow of make-up liquid was utilised in the ESI mode for transfer of the analytes from the expanding CO2 gas to the liquid phase before ionisation. The low make-up liquid flow in the ESI mode was sufficient for preventing the restrictor from becoming blocked. Factors that influence the ion signal intensity and stability have been studied. In APCI mode, corona needle position, nebuliser gas flow and gas additives were studied and in ESI mode, spray capillary assembly dimension and position, liquid flow-rate and composition were studied. The achievable detection limits were in the 50-0.1 pg (i.e., 290 fmol-140 amol) range. The detection limit in APCI mode was improved by a factor of about 20-25 compared to an earlier design [L.N. Tyrefors, R.X. Moulder, K.E. Markides, Anal. Chem. 65 (1993) 2835].     

Improving the universal response of evaporative light scattering detection by mobile phase compensation

Mobile phase compensation, first reported for the charged aerosol detector (CAD), was used as a suitable method to overcome problems related to the mobile phase-dependent response of the evaporative light scattering detector (ELSD). Mobile phase compensation was effectively performed both in the flow injection- and in gradient modes. Without compensation, the response factors of the ELSD for six sulfonamide drugs differed by a factor of two when varying the mobile phase composition between 10 and 90% acetonitrile. This change could be effectively eliminated using the technique of mobile phase compensation, where a secondary pump with a reversed gradient was used to provide the detector with a constant composition of the mobile phase. For identical experimental conditions, the ELSD showed a nearly constant, albeit somewhat reduced, response with compensation. This indicates that under such conditions, the ELSD behaved as a concentration-sensitive detector. The analysis of sulfonamides drugs at 0.05% level using gradient UPLC-ELSD separation with mobile phase compensation is demonstrated.     

Selection of the optimum electrospray voltage for gradient elution LC-MS measurements

Changes in liquid composition during gradient elution liquid chromatography (LC) coupled to mass spectrometry (MS) analyses affect the electrospray operation. To establish methodologies for judicious selection of the electrospray voltage, we monitored in real time the effect of the LC gradient on the spray current. The optimum range of the electrospray voltage decreased as the concentration of organic solvent in the eluent increased during reversed-phase LC analyses. These results and related observations provided the means to rationally select the voltage to ensure effective electrospray operation throughout gradient-elution LC separations. For analyses in which the electrospray was operated at constant voltage, a small run-to-run variation in the spray current was observed, indicating a changing electric field resulting from fouling or degradation of the emitter. Algorithms using feedback from spray current measurements that can maintain the electrospray voltage within the optimum operating range throughout gradient elution LC-MS were evaluated. The electrospray operation with voltage regulation and at a constant, judiciously selected voltage during gradient elution LC-MS measurements produced data with similar reproducibility.     

应用高效液相色谱和电喷雾质谱联用技术分析鉴定车前草中的苯乙醇苷化合物

本文采用高效液相色谱与电喷雾质谱联用技术在线分析鉴定了车前草提取物中的三种苯乙醇苷化合物。实验采用反相C18色谱柱,0.2%的醋酸水溶液和乙腈梯度洗脱,车前草中的苯乙醇苷化合物得到很好的分离。在电喷雾质谱负离子条件下,获得了三种苯乙醇苷化合物的分子离子峰,分子量信息,进一步通过质谱的源内CID技术得到相应化合物的结构信息。通过得到的这些信息与文献中的已知化合物或标准品对照从而推断出化合物的结构。     

Azithromycin quantitation in human plasma by high-performance liquid chromatography coupled to electrospray mass spectrometry: application to bioequivalence study

A sensitive and specific liquid chromatography-electrospray ionization mass spectrometry method is developed and validated for the identification and quantitation of azithromycin in human plasma. After the addition of the internal standard and 1.0M sodium hydroxide solution, plasma samples are extracted with a methylene chloride-ethyl acetate mixture (20:80, v/v). The organic layer is evaporated under a stream of nitrogen at 40 degrees C. The residue is reconstituted with 200 microL of the mobile phase. The compounds are separated on a prepacked Shimadzu Shim-pack VP-ODS C18 (5 microm, 150 mm x 2.0 mm) column using a mixture of acetonitrile-water (65:35) (0.5% triethylamine, pH was adjusted to 6.2 with acetic acid) as the mobile phase. Detection is performed on a single quadrupole mass spectrometer by selected ion monitoring mode via electrospray ionization source. The method is fully validated and linear calibration curves are obtained in the concentration ranges from 5 to 2000 ng/mL. The intra- and inter-batch relative standard deviations at four different concentration levels are all < 10%. The limit of detection and quantitation are 2 ng/mL and 5 ng/mL, respectively. The proposed method enables the unambiguous identification and quantitation of azithromycin for pharmacokinetic, bioavailability, or bioequivalence studies.     

Direct analysis of oligosaccharides and alpha hydroxy acids in fruits using electrosonic spray ionization mass spectrometry

Electrosonic spray ionization (ESSI) is a derivative technique of electrospray ionization (ESI) for mass spectrometry (MS) in which droplets are charged in the course of sonic spray. In this study, we applied ESSI MS to direct analysis of oligosaccharides and alpha hydroxy acids (AHAs) in fruits. The components were extracted from fruit fleshes by a feasible method prior to ESSI MS analysis, but the fruit juices were analyzed without further pretreatment. The results demonstrate that mainly alkali metal adducts of oligosaccharides are favorably produced in positive ion mode, while deprotonated AHAs and oligosaccharides are produced in negative ion mode. Compared with mass spectra obtained using electrospray droplet impact/secondary ion mass spectrometry (EDI/SIMS), mass spectra using ESSI make the identification of oligosaccharides more straightforward in positive ion mode than in negative ion mode.     

Quantitative determination of chemical constituents from seeds of Nigella sativa L. using HPLC-UV and identification by LC-ESI-TOF

An HPLC method was developed for the simultaneous determination of nine compounds of Nigella sativa L. The separation was achieved within 23 min by using C18 column material, a water-acetonitrile mobile phase, both containing 0.1% acetic acid gradient system and a temperature of 35 degrees C. The method was validated for linearity, repeatability, LOD, and LOQ. The LOD and LOQ of nine compounds were in the range of 0.09-10 and 0.3-25 microg/mL, respectively. The wavelength used for quantification with the diode array detector was 205 and 260 nm. LC/MS coupled with electrospray ionization interface method is described for the identification of compounds in N. sativa L. samples. This method involved the use of [M+H]+ and [M+Na]+ ions in the positive ion mode with extracted ion chromatogram.     

Separation of polar mushroom toxins by mixed-mode hydrophilic and ionic interaction liquid chromatography-electrospray ionization-mass spectrometry

Reversed-phase liquid chromatography (RPLC) is commonly used to analyze nonvolatile contaminants and naturally occurring toxins in foods. However, polar compounds, such as hydrophilic polypeptides and quaternary ammonium salts, are often not satisfactorily separated by RPLC and present a challenge for analytical scientists. In this study, hydrophilic interaction liquid chromatography (HILIC), on an amide-based stationary phase in combination with electrospray ionization (ESI) tandem mass spectrometry (MS-MS), is successfully employed to simultaneously separate polar mushroom toxins, including amanitins and phallotoxins, which are cyclic oligopeptides and muscarine, a quaternary ammonium compound, in mushrooms. The sensitivity of different ionization modes is studied, and the positive ionization mode is found to provide a more sensitive and effective tool for the unambiguous identification of the concerned polar toxins because of their characteristic fragmentation patterns. The properties of the mobile phase are also found to have significant impacts on the separation. At a high acetonitrile (ACN) concentration, hydrophilic interaction dominates, and all analytes under study demonstrate a much higher affinity with the stationary phase. The addition of methanol (MeOH) as a modifier could further enhance the HILIC separation for amanitins, phallotoxins, and muscarine. Valley-to-valley separation is achieved upon the optimatizatiqn of the mobile phase (comprising of ACN, MeOH, and ammonium formate buffer at pH approximately 3.5) and the solvent gradient. HILIC coupled with ESI-MS-MS is demonstrated to be a novel technique for the simultaneous separation and confirmatory analysis of the concerned polar toxins by providing an environment of solubility and retention that could not be achieved through the use of RPLC.     

Ultra-performance liquid chromatography/tandem mass spectrometry for the simultaneous analysis of aflatoxins B1, G1, B2, G2 and ochratoxin A in beer

The simultaneous analysis of aflatoxins B1, G1, B2, G2 and ochratoxin A in beer was carried out by ultra-performance liquid chromatography/tandem mass spectrometry (UPLC/MS/MS). Mycotoxins were extracted, purified and concentrated from the beer sample in one step using a solid-phase extraction (SPE) cartridge that contained a polymeric sorbent. Optimization of different parameters, such as type of SPE sorbent, type and amount of wash solvent and pH of the sample, was carried out. The mobile phase consisted of a gradient of methanol + water (0.1% HCOOH) and a reversed-phase C18 column was used for the separation. The mass spectrometer used an electrospray ionization source operated in the positive mode to detect aflatoxins and in the negative mode to detect ochratoxin. UPLC/MS/MS is a rapid and sensitive technique that allows the separation of the five toxins in only 3.2 min. The limit of detection is 1 pg.