结合分子模拟探讨不同醚键PBS基共聚物的性能与酶催化降解

以硫二甘醇取代二甘醇,在聚(丁二酸丁二醇酯)(PBS)分子主链上分别引入硫醚和氧醚基团,得到聚(丁二酸丁二醇酯-丁二酸硫代二乙二醇酯)[P(BS-co-TDGS)]和聚(丁二酸丁二醇酯-丁二酸二乙二醇酯)[P(BS-co-DEGS)],通过热重分析(TG)和X射线衍射(XRD)测试比较了二者的结晶性能和热性能.采用南极假丝酵母脂肪酶N435(CALB)为催化剂,在水相中研究了P(BS-co-TDGS)和P(BS-co-DEGS)的降解规律及差异性.采用分子模拟方法研究了共聚物可能存在的聚集态以及N435酶与底物的结合,模拟结果验证了共聚物P(BS-co-TDGS)的结晶度下降及热稳定性降低的结论.分子对接模拟结果表明,N435酶与DEGSDEG单元的结合能更大,即含有丁二酸硫代二乙二醇酯键型底物P(BS-co-DEGS)与N435酶活性位点的对接更为稳定.     

亲水改性PBS基共聚物的N435酶降解差异性及分子模拟

在水相体系中, 采用脂肪酶Novozym435对聚丁二酸丁二醇酯(PBS)分子主链中氧醚键在醇段和酸段的不同位置的共聚物聚(丁二酸丁二醇-co-丁二酸二甘醇酯)[P(BS-co-BDGA)]和聚(丁二酸丁二醇-co-二甘醇酸丁二醇酯)[P(BS-co-DEGS)]进行酶促降解研究. 以分子对接模拟探讨了酶对亲水性底物的识别及相互作用机制. 通过对降解前后不同摩尔比的共聚物薄膜的质量损失率、 亲水性、 热性能以及降解产物的分析, 研究了PBS改性共聚物的降解规律. 结果表明, 随着降解时间的推移, 所有共聚物薄膜的质量损失率升高, 亲水性增强, 热分解温度升高; 降解5 d后, P(BS-co-BDGA)降解产生的低聚物种类比P(BS-co-DEGS)的多. 分子对接结果表明, 醚键在酸段的P(BS-co-BDGA)型酯键与Novozym435酶活性位点的结合比醚键在醇段的P(BS-co-DEGS)型酯键更稳定, 因此, 在N435脂肪酶作用下, P(BS-co-BDGA)比P(BS-co-DEGS)的降解效果好. 实验结果表明, 当DGA摩尔分数为20%时, 降解效果最佳.     

生物可降解聚丁二酸/苯基丁二酸丁二醇酯系列共聚物的合成及其结晶行为

合成了一系列聚丁二酸/苯基丁二酸丁二醇共聚酯(PBSBS),利用DSC、1H-NMR和X射线等测试手段对共聚物组成、热力学性能、结晶性能、等温结晶行为进行了表征和研究.结果表明,含苯基的共聚单元的引入显著改变了聚丁二酸丁二醇酯(PBS)的热力学性能4,利用Hoffman-Week曲线得到的共聚物平衡熔点随共聚组分含量的增加显著降低,玻璃化转变温度则明显升高,结晶熔点符合无规共聚物的Flory方程.此外,利用Avrami方程对均聚物PBS以及共聚物PBSBS-10分别进行了等温结晶行为研究,结果表明共聚使结晶速率降低,PBS和PBSBS-10的Avrami指数分别介于2.8~3.0和2.7~2.9之间,结晶方式为三维生长异相成核,X射线测试结果表明共聚不影响晶体结构.     

生物可降解共聚物聚丁二酸/对苯二甲酸丁二醇酯(PBST)的序列结构及结晶性研究

制备了高分子量的聚丁二酸丁二醇酯,并通过与对苯二甲酸二甲酯的无规共聚调节其生物可降解性及力学性能,得到了具有优良机械性能和不同生物降解速度的一系列共聚物,并对共聚物序列结构、热力学性能、结晶性进行了研究.结果表明,该共聚物为无规共聚物,PBS和PBT分别结晶.共聚物的结晶熔点符合无规共聚物的Flory方程.     

具有刚性液晶元侧基的嵌段共聚物PHEMAChol-b-PBLG的合成及自组装研究

以胆固醇和谷氨酸苄酯为主要出发原料,采用可逆加成-断裂链转移(RAFT)自由基聚合、氨基酸环内酸酐(NCA)开环聚合(ROP)以及"点击化学"(click chemistry)组合方法,设计、合成了系列具有刚性液晶元侧基的聚甲基丙烯酸羟乙酯胆固醇碳酸酯-嵌段-聚谷氨酸苄酯(PHEMAChol-b-PBLG),并通过核磁共振(NMR)、红外光谱(FTIR)、凝胶渗透色谱(GPC)和静态光散射(SLS)对其化学结构进行了表征.运用热重分析仪(TGA)、热台偏光显微镜(POM)和示差扫描量热仪(DSC)研究了系列共聚物的热稳定性、液晶相结构及相转变行为,并通过固体红外、13C固体核磁共振(13C CP/MAS)和X射线衍射仪(XRD)研究了PBLG均聚物及系列嵌段共聚物中聚氨基酸多肽链段的二级结构.研究结果表明,系列嵌段共聚物均具有良好的热稳定性,表现为近似向列相的液晶织构,PBLG链段趋于呈刚直棒状的α-螺旋构型,且其多肽链段越长,二级结构越规整.进一步采用圆二色谱(CD)和透射电镜(TEM)对系列嵌段共聚物在四氢呋喃溶液中的二级结构及自组装行为进行了研究,制备得到纺锤形自组装聚集体和大复合胶束,并通过变性酸三氟乙酸的引入实现对嵌段共聚物中PBLG的二级结构及相应自组装聚集体形貌的有效调控.     

1，4-环己烷二甲醇改性生物可降解聚酯PBS的合成与性能表征

用熔融缩聚法合成了一系列聚（丁二酸丁二醇酯丁二酸-1,4-环己烷二甲醇酯）无规共聚物。通过。H—NMR、FT—IR、DSC、TGA、XRD、酶降解测试等方法表征了材料的结构与性能。结果表明：合成得到的共聚酯为预期产物;共聚酯的晶体结构发生了改变,并产生了共晶行为;随着1,4-环己烷二甲醇（CHDM）含量的增加,产物的熔点由113．7℃降至64．6℃,然后升至114．2℃,玻璃化转变温度由-33．8℃单调升高至5．4℃;CHDM的引入增强了共聚酯的热稳定性;酶降解测试得出产物P51、P31具有良好的生物降解性,且P51降解最快。     

聚（琥珀酸丁二醇酯-共-富马酸丁二醇酯）的合成及其双羟基化反应研究

以琥珀酸、富马酸、丁二醇为原料，用共缩聚的方法合成了一系列高分子量聚 （琥珀酸丁二醇酯-共-富马酸丁二醇酯）。然后在催化剂四氧化锇和N-甲基吗啉- N-氧化物以及水存在下，使高分子主链中富马酸丁二醇酯共聚单元的碳碳不饱和双 键发生羟基化反应得到含有亲水性侧羟基的功能性聚酯。对上述合成的生物降解性 高分子运用核磁共振（NMR）、红外（FT-IR）、热分析等方法进行了结构与物理性 能表征。     

生物可降解聚丁二酸/甲基丁二酸丁二酯系列共聚物的合成和表征

摘要合成了一系列聚丁二酸/甲基丁二酸丁二醇共聚酯(PBSM), 利用DSC, ¹H NMR和X射线衍射等方法对共聚物组成、 热学性能、 结晶性能、 等温结晶行为进行了研究. 结果表明, 引入甲基丁二酸共聚单元较为显著地改变了聚丁二酸丁二酯(PBS)的热学性能, 利用Hoffman\|Weeks方程得到的共聚物平衡熔点随共聚物的组分含量增加而降低, 玻璃化转变温度亦有所降低, 熔点则符合无规共聚物的Flory方程. 此外, 利用Avrami方程分别研究了均聚物PBS及共聚物PBSM-20的等温结晶行为, 结果表明, 在所研究的温度范围内, 聚酯结晶速率随温度升高而降低, PBS和PBSM\-20的Avrami指数分别介于2.8~3.0和2.7~3.0之间, 结晶方式为三维生长异相成核, 而X射线衍射测试结果表明晶体结构几乎不变.     

聚(丁二酸丁二酯-co-丁二酸丙二酯)的等温结晶行为研究

以1,4-丁二酸、1,4-丁二醇和1,3-丙二醇为原料通过直接熔融缩聚法合成了聚丁二酸丁二酯(PBS),聚丁二酸丙二酯(PPS)和聚(丁二酸丁二酯-co-丁二酸丙二酯)(PBSPS)等脂肪族聚酯.利用1H-NMR,WAXD,DSC和POM等研究了聚酯的结晶结构和结晶动力学过程等结晶行为.PBSPS的结晶晶型与PBS一致,说明只有丁二酸丁二酯(BS)单元结晶而丁二酸丙二酯(PS)单元处于无定形区.聚酯等温结晶后,在升温熔融过程中出现了多重熔融峰.分析表明多重熔融峰主要来自于聚酯升温过程中的熔融-重结晶行为.利用Avrami方程分析了聚酯的等温结晶动力学,Avrami指数n为2.2~2.8,说明聚酯等温结晶时主要以异相成核的三维生长方式进行;随着PS单元的增多,聚酯的表观结晶活化能升高,也就是说BS单元的结晶变得困难.POM观察到聚酯等温结晶时都出现了环带球晶现象,球晶形态会随着结晶温度和化学结构差异而改变.     

β-环糊精黄原酸酯引发的RAFT聚合用于β-环糊精改性

碱性条件下β-环糊精(β-CyD)与二硫化碳反应生成黄原酸盐,随后与α-溴丁酸甲酯反应制得β-环糊精黄原酸酯,并以此为可逆加成-断裂链转移聚合(RAFT)的链转移剂,制备了3种不同接枝链长的共聚物β-环糊精-聚(N,N-二甲基丙烯酰胺)(β-CyD-PDMA).用核磁共振对β-环糊精黄原酸酯及其接枝共聚物进行了结构表征,考察了β-CyD-PDMA水溶液的黏度、表面张力随接枝链长的变化.通过圆二色谱研究了分子结构的不对称性.使用高分辨透射电镜(HRTEM)、动态光散射(DLS)研究了β-CyD-PDMA在水溶液中的自组装行为.结果表明:β-环糊精上3个6位羟基参与了黄原酸化反应,生成的共聚物为不对称的皇冠状结构;β-CyD-PDMA分子量分布较窄,表现出很好的可控活性聚合特征;接枝共聚物可以进行类胶束聚集,而含有较长PDMA链的共聚物在低浓度下自组装形成直径为280 nm的胶束结构,在高浓度下形成6 nm的新聚集结构.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.