Efficient Liquid‐Phase Oxidation of Diphenylmethane to Benzophenone over Vanadium‐Containing MCM‐41 Catalysts

The liquid‐phase oxidation of diphenylmethane with tert‐butylhydroperoxide has been studied using vanadium‐containing MCM‐41 materials, which were prepared by direct hydrothermal (V‐MCM‐41) and wet impregnation (V/MCM‐41) methods. These catalysts were characterized in detail by ICP‐AES, N₂‐sorption, XRD, FT‐IR, ²⁹Si and ⁵¹V NMR, TPD of ammonia, TPR of hydrogen, and chemisorption of oxygen. Both series of catalyst show good catalytic results, which are attributed to their highly ordered mesoporous structure, large BET surface area as well as the presence of easily accessible vanadium‐oxygen species as active centers in the catalyst. Further, V‐MCM‐41 exhibit superior catalytic activity (based on turnover number) than V/MCM‐41 mainly due to well‐dispersed tetrahedral vanadium‐oxygen species with higher oxidation ability. The effect of reaction parameters, i.e., temperature, time, solvent, etc. were investigated. Catalyst recycling test reveals good stability with only slight extent of leaching during the reaction.     

Immobilization of cerium (IV) and erbium (III) in mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for the synthesis of 5‐substituted tetrazoles,and chemo‐ and homoselective oxidation of sulfides

Two well‐ordered 2D ‐ hexagonal cerium (IV) and erbium (III) embedded functionalized mesoporous MCM ‐ 41(MCM‐41@Serine/Ce and MCM ‐ 41@Serine/Er) have been developed via functionalization of mesoporous MCM ‐ 41. The surface modification method has been used in the preparation of serine‐grafted MCM ‐ 41 and led to the development of MCM‐41@Serine. The reaction of MCM‐41@Serine with Ce (NH₄)₂(NO₃)₆·2H₂O or ErCl₃·6H₂O in ethanol under reflux led to the organization of MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts. The structures of these catalysts were determined using scanning electron microscopy, mapping, energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, thermogravimetric analysis, X‐ray diffraction, inductively coupled plasma, and Brunauer–Emmett–Teller analysis. These MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts show outstanding catalytic performance in sulfides oxidation and synthesis of 5‐substituted tetrazoles. These catalysts can be recycled for seven repeated reaction runs without showing a considerable decrease in catalytic performance.     

Synthesis and characterization of indium and thallium immobilized on isonicotinamide‐functionalized mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides

Two highly ordered isonicotinamide (INA)‐functionalized mesoporous MCM‐41 materials supporting indium and thallium (MCM‐41‐INA‐In and MCM‐41‐INA‐Tl) have been developed using a covalent grafting method. A surface functionalization method has been applied to prepare Cl‐modified mesoporous MCM‐41 material. Condensation of this Cl‐functionalized MCM‐41 with INA leads to the formation of MCM‐41‐INA. The reaction of MCM‐41‐INA with In(NO₃)₃ or Tl(NO₃)₃ leads to the formation of MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts. The resulting materials were characterized using various techniques. These MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts show excellent catalytic performance in the selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides. Finally, it is found that the anchored indium and thallium do not leach out from the surface of the mesoporous catalysts during reaction and the catalysts can be reused for seven repeat reaction runs without considerable loss of catalytic performance.     

Oxo‐vanadium(IV) Schiff base complex supported on modified MCM‐41: a reusable and efficient catalyst for the oxidation of sulfides and oxidative S–S coupling of thiols

Oxo‐vanadium(IV) Schiff base complex supported on MCM‐41 as an organic–inorganic hybrid heterogeneous catalyst was synthesized with post‐grafting of MCM‐41 with 3‐aminoropropyltrimethoxysilane and subsequent reaction with 3,4‐dihydroxybenzaldehyde and then complexation with oxo‐vanadium acetylacetonate salt. The catalyst was analysed using a series of characterization techniques such as Fourier transform infrared spectroscopy, small‐angle X‐ray diffraction, nitrogen absorption isotherm, transmission electron microscopy and thermogravimetric analysis. The data collected provided evidence that the vanadium complex was anchored onto MCM‐41. High catalytic activity of this catalyst was observed in the oxidation of various sulfides and thiols (into sulfoxides and disulfides, respectively) with urea hydrogen peroxide as oxidant in high to excellent yields and selectivity under mild conditions. The heterogeneous catalyst could be recovered easily and reused several times without significant loss in catalytic activity and selectivity. Copyright © 2015 John Wiley & Sons, Ltd.     

Vapor‐Phase Reaction of Citronellal over Mesoporous Molecular Sieves MCM‐41 and Zeolites

The vapor‐phase reaction of citronellal (CTN) at 220 °C and atmospheric pressure has been studied using mesoporous molecular sieves and zeolites in a fixed‐bed reactor. The primary products included isopulegol (IPG), menthone, and pulegol with subsequent reactions to form cyclic hydrocarbons. The CTN conversion and the product selectivity depend on the acidity and the textural property of catalysts. Lewis and/or Brönsted acid sites are essential for catalyzing this reaction. An increase of SiO₂/Al₂O₃ mol ratio diminishes the acid amount of all catalysts and enhances both the surface area and the structural order of MCM‐41. The catalytic activity follows the order of MCM‐41 > HZSM‐5 > Hβ > USY, in accordance with the relative total acid amount except that of MCM‐41. Despite its low acidity, Si‐MCM‐41 exhibits the best catalytic performance due to its uniform mesopores, large surface area and good stability; the CTN conversion and the IPG yield attain 91.9% and 58.6%, respectively, after at least 25 h time‐on‐stream.     

Liquid Phase Hydrogenation of t,t,c‐1,5,9‐Cyclododecatriene over Ni/MCM‐41 and Ni/SiO2 Catalysts

Ni‐loaded pure siliceous and aluminosilicate MCM‐41 (Ni/MCM‐41) and nickel‐loaded silica (15Ni/SiO₂) were synthesized via wet impregnation and were characterized by various techniques. The H₂ consumption in the TPR analysis was found to be proportional to the Ni amount in the calcined samples. After reduction the average Ni particle sizes of 15Ni/MCM‐41 and 15Ni/SiO₂ were 9–12 and 16 nm, respectively, by means of XRD and TEM measurements. All catalysts owned weak and intermediate Lewis acid sites that increased slightly with increasing the Ni amount and the Al content. In the liquid phase hydrogenation of t,t,c‐1,5,9‐cyclododecatriene over Ni/MCM‐41, the catalytic activity was parallel to the Ni content and enhanced slightly with the acid amount of the catalysts. Consequently, it was proposed that the Ni metallic sites contributed the major effect to the catalytic activity while the Lewis acid sites promoted a small but significant influence on the catalytic performance. It is noteworthy that all 15Ni/MCM‐41 catalysts exhibited remarkably higher activity than that of the conventional 15Ni/SiO₂ catalyst.     

Low Potential Detection of NADH at Titanium‐Containing MCM‐41 Modified Glassy Carbon Electrode

Titanium‐containing MCM‐41 (Ti‐MCM‐41) modified glassy carbon electrode (GCE) can exhibit an excellent electrocatalytic activity towards the oxidation of β‐Nicotinamide adenine dinucleotide (NADH). A dramatic decrease in the over‐voltage of NADH oxidation reaction is observed at 0.28 V (vs. SCE). The modified electrode is found to be stable and reproducible. The electrode shows a linear response for a wide range of 10–1200 μM NADH and the detection limit is 8.0 μM. Ti‐MCM‐41 mesoporous molecular sieves provide an efficient matrix for development of NADH biosensors and the prepared electrode not only can be used to detect the concentration of NADH in biochemical reaction, but also as the potential matrix of the construction of dehydrogenases biosensor.     

Detection of NADH and Ethanol at Titanium Containing MCM‐41 with Low Overpotential

Titanium‐containing MCM‐41 (Ti‐MCM‐41) modified glassy carbon electrode (GCE) can exhibit an excellent electrocatalytic activity towards the oxidation of β‐Nicotinamide adenine dinucleotide (NADH). A dramatic decrease in the overvoltage of NADH oxidation reaction is observed at 0.28 V vs. SCE. The application in the amperometric biosensing of ethanol using alcohol dehydrogenase enzyme (ADH) also has been demonstrated with this material. The proposed sensor shows a highly sensitivity, an acceptable reproducibility and a good stability. The linear range of ethanol is 25–1000 μM and the detection limit is 8.0 μM. Ti‐MCM‐41 modified electrode not only can be used to detect the concentration of NADH in biochemical reaction, but also as the potential matrix for the construction of dehydrogenases sensor.     

Synthesis,Characterization and Catalysis of Ce‐MCM‐41

The cerium‐containing MCM‐41 (Ce‐MCM‐41) has been synthesized by direct hydrothermal method. The low‐angle XRD patterns revealed the typical five major peaks of MCM‐41 type hexagonal structures. The interplanar spacing d₁₀₀ = 38.4 Å was obtained that can be indexed on a hexagonal unit cell parameter with a_o = 44.3 Å which was larger than that of pure siliceous MCM‐41 (Si‐MCM‐41). Transmission electron micrograph shows the regular hexagonal array of uniform channel characteristics of MCM‐41. The BET surface area of Ce‐MCM‐41 was 840 m²/g, which is much reduced as compared to that of Si‐MCM‐41, with the pore size of 26.9 Å and mesopore volume of 0.78 cm³/g were measured by nitrogen adsorption‐desorption isotherm at 77 K. Along with the results, the synthesized Ce‐MCM‐41 exhibited a well‐ordered MCM‐41‐type mesoporous structure with the incorporation of cerium. Using Ce‐MCM‐41 as a support, the Rh (0.5 wt%) catalyst exhibited very high activity for the NO/CO reactions.     

Understanding the nature of vanadium species supported on activated carbon and its catalytic properties in the aerobic oxidation of aromatic alcohols

Vanadium oxide catalysts supported on activated carbon (V/AC) with V loadings ranging from 1 to 20 wt.% were prepared by a wet-impregnation method. Various physicochemical characterization techniques, including nitrogen physisorption, X-ray diffraction (XRD), Raman spectroscopy, X-ray absorption (XANES and EXAFS), X-ray photoelectron spectroscopy (XPS), and electron spin resonance (ESR), were employed to understand the nature of vanadium species on activated carbon. The results revealed that vanadium oxide mainly existed in a highly dispersed state for 10 wt.% or less vanadium loadings; a large amount of vanadium resulted in aggregated microcrystalline phase. Vanadium species on activated carbon surface showed a similar local coordination structure to that of NH₄VO₃ with a distorted tetrahedral symmetry at low vanadium loadings, whereas octahedral coordination was dominant at high vanadium loadings (>10 wt.%). All V/AC samples showed V⁵⁺ as the major oxidation state. Nevertheless, V⁴⁺ centered in a distorted tetrahedral symmetry could be detected at a vanadium loading greater than 4 wt.%. The catalytic activity for the benzyl alcohol oxidation largely depended on the dispersion, oxidation state, and local coordination of vanadium oxides on activated carbon. Highly dispersed vanadium (5+) species with a distorted tetrahedral coordination were postulated to account for the excellent catalytic performances of V/AC catalysts (TOF = 39.1 h^?1).     

Catalytic Performance and Dispersion Behavior of Supported Nano‐Amorphous Alloy NiB/MCM‐41 Catalysts Prepared by Chemical Reductive Deposition

Supported nano‐amorphous alloy NiB/MCM‐41 catalysts were prepared by chemical reductive deposition. The as‐prepared catalysts were characterized by XRD, SEM, TEM, EDAX, ICP, and N₂ adsorption‐desorption. The amorphous alloy structure of NiB active sites, mesoporous structure of catalysts, and higher BET area have been proved by the experiments. The catalysts have given excellent catalytic activity and selectivity in the production of 3‐(N‐benzyl)‐amino‐4‐methoxy‐ acetanilide from 3‐amino‐4‐methoxy‐acetanilide and benzaldehyde.     

Dehydration of Castor Oil over NaHSO4/MCM‐41 Catalyst Modified by n‐Dodecyltriethoxysilane

n‐Dodecyltriethoxysilane (DTEOS) modified NaHSO₄/MCM‐41 catalysts (silanized catalysts) were synthesized by different impregnation sequences and evaluated in the liquid‐phase dehydration of castor oil. The samples were evaluated by X‐ray diffraction, nitrogen adsorption‐desorption, SEM, TEM, FT‐IR spectroscopy, XPS, ²⁹Si MAS NMR spectroscopy, contact angle measurements, NH₃‐TPD, and pyridine‐FT‐IR spectroscopy. The analyses demonstrated that silanization enhanced the hydrophobicity of the catalysts, and the impregnation sequence of silanized catalysts had a significant effect on the NaHSO₄ dispersion, surface area, acid distribution, and hydrophobicity of the silanized catalysts. The catalytic activity of the silanized catalysts was much higher than that of NaHSO₄/MCM‐41. Among the silanized catalysts, the catalyst prepared by simultaneous impregnation with DTEOS and NaHSO₄ showed the highest iodine value of 141.8 [g(I₂) per 100 g] and lowest hydroxyl value of 11.3 [mg(KOH) · g^–1].     

A Novel SiO2‐Supported Fluorine Modified Chromium–Vanadium Bimetallic Catalyst for Ethylene Polymerization and Ethylene/1‐Hexene Copolymerization

Phillips catalyst is one of the most significant industrial ethylene polymerization catalysts. Chemical modifications have been carried out to tune the Phillips catalyst performance and improve the polyethylene properties. After the modification of the catalyst by fluorine, the polyethylene product with higher molecular weight (MW) and narrower molecular weight distribution (MWD) is suitable for producing automobile fuel tanks. Vanadium containing Phillips catalyst enhances α‐olefin incorporation and MW regulation. In present work, fluorine modified and unmodified chromium–vanadium (Cr–V) bimetallic catalysts are prepared and explored. Compared with the fluorine‐free catalyst, the activities of F‐modified bimetallic catalysts slightly decrease with the increasing MW of the product and the hydrogen response increases slightly. Due to the synergistic effect of the chromium, vanadium and fluorine on the silica gel support, the short‐chain branch distribution (SCBD) of copolymers from F‐modified Cr–V bimetallic catalyst (Cr–V–F)⁶⁰⁰ is more beneficial than that of Cr–V bimetallic catalyst (Cr–V)⁶⁰⁰ and F‐modified Cr–V bimetallic catalyst (Cr–V–F)⁵⁰⁰. The fluorination of Cr–V bimetallic catalysts has not only preserved the high polyethylene activity of bimetallic active sites but also produced the advantage of the high MW ability from fluorine.

     

Oxidative Desulfurization of Model Diesel Fuel by Vanadium Granular-Shape Mesoporous (V/GMS) Silica System as Nanocatalyst

The performance of V-containing granular-shape mesoporous (V/GSM) silica systems in oxidative desulfurization of model diesel fuel was studied. FTIR, XRD, SEM, TEM, N₂ adsorption-desorption, UV-Vis, and NH₃-TPD techniques were used to analyze the surface properties of the functionalized catalyst. The mesostructure of silica remains intact after vanadium modifications as shown by XRD and adsorption-desorption analysis, while spectroscopy indicates the successful impregnation of neat vanadium oxide inside the porous silica support. The oxidation desulfurization of model diesel fuel was effectively catalyzed by this catalyst and the highest activity was shown by 4.8% V/GSM catalyst. Compared with their conventional V/MCF and V/MCM-41 counterparts, SSM-supported vanadium catalysts showed much higher activity. This may be associated with the higher reducibility and better diffusion of reactants and products in V/MCF and V/MCM-41catalysts.     

Biodegradable polyester/modified mesoporous silica composites for effective bone repair with self‐reinforced properties

A series novel composites based on poly(_L‐lactide) (PLLA) oligomer modified mesoporous silica (MCM41) homogeneous dispersed into poly(_L‐lactide‐co‐trimethylene carbonate‐co‐glycolide) (PLTG) terpolymer has been successfully prepared. The structure of PLTG terpolymer was characterized by ¹H NMR. The structure and properties of modified and unmodified MCM41 were attested by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analyzer (TGA), X‐ray diffraction (XRD), N₂ adsorption–desorption, scanning electron microscope (SEM), and transmission electron microscope (TEM), which demonstrated that the MCM41 was successfully grafted by the PLLA oligomer. The effect of different concentration of modified MCM41 in PLTG matrix on thermal properties, mechanical properties, and hydrophilicity was investigated by TGA, differential scanning calorimetry (DSC), mechanical testing, contact angle measurement, and SEM. The results of mechanical tests showed that 5 wt% of modified MCM41 nanoparticles gave rise to optimal reinforcing effect. The tensile strength, Young's modulus, and elongation at break of the PLTG/PLLA‐MCM41 (5%) composites were 33.2 Mpa, 1.58 Gpa, and 268.7%, respectively, which were all higher than the PLTG/MCM41 (5%) composites and pristine PLTG matrix, which were due to good interfacial adhesion between the PLTG matrix and MCM41 nanoparticles. TGA and DSC have shown that 5% modified MCM41 in the PLTG increased the temperature of composite degradation and T_g. Water contact angle measurement showed the hydrophilicity of the composites increases with the increase of modified MCM41 content. The live/dead assay showed that the modified MCM41 existing on the PLTG matrix presents very excellent cytocompatibility. Therefore, the novel composite material represents promising way for bone tissue engineering application.     

Oxovanadium(V) tetrathiacalix[4]arene complexes and their activity as oxidation catalysts

With the aim of modeling reactive moieties and relevant intermediates on the surfaces of vanadium oxide based catalysts during oxygenation/dehydrogenation of organic substrates, mono- and dinuclear vanadium oxo complexes of doubly deprotonated p-tert-butylated tetrathiacalix[4]arene (H4TC) have been synthesized and characterized: PPh4[(H2TC)VOCl(2)] (1) and (PPh4)2[{(H2TC)V(O)(mu-O)}2] (2). According to the NMR spectra of the dissolved complexes they both retain the structures adopted in the crystalline state, as revealed by single-crystal X-ray crystallography. Compounds 1 and 2 were tested as catalysts for the oxidation of alcohols with O(2) at 80 degrees C. Both 1 and 2 efficiently catalyze the oxidation of benzyl alcohol, crotyl alcohol, 1-phenyl-1-propanol, and fluorenol, and in most cases dinuclear complex 2 is more active than mononuclear complex 1. Moreover, the two thiacalixarene complexes 1 and 2 are in many instances more active than oxovanadium(V) complexes containing "classical" calixarene ligands tested previously. Complexes 1 and 2 also show significant activity in the oxidation of dihydroanthracene. Further investigations led to the conclusion that 1 acts as precatalyst that is converted to the active species PPh4[(TC)V==O] (3) at 80 degrees C by double intramolecular HCl elimination. For complex 2, the results of mechanistic investigations indicated that the oxidation chemistry takes place at the bridging oxo ligands and that the two vanadium centers cooperate during the process. The intermediate (PPh4)2[{H2TCV(O)}2(mu-OH)(mu-OC13H9)] (4) was isolated and characterized, also with respect to its reactivity, and the results afforded a mechanistic proposal for a reasonable catalytic cycle. The implications which these findings gathered in solution may have for oxidation mechanisms on the surfaces of V-based heterogeneous catalysts are discussed.     

MCM‐41 Immobilized Acidic Functional Ionic Liquid and Chromium(III) Complexes Catalyzed Conversion of Hexose into 5‐Hydroxymethylfurfural

The development of novel methods to obtain biofuels and chemicals from biomass has been an immediate issue in both academic and industrial communities. In this work, a series of novel catalysts were prepared and characterized by FT‐IR , TGA , XRD , SEM , TEM , ICP‐AES , NH₃‐TPD and BET , which were applied for the conversion of hexose to 5‐hydroxymethylfurfural (HMF ). The Cr(Salten)‐MCM ‐41‐[(CH₂ )₃SO₃HVIm ]HSO₄ catalyst was the most active catalyst, and a glucose conversion of 99.8% with 50.2% HMF yield was obtained at 140 °C for 4 h in dimethyl sulfoxide (DMSO ). The effects of reaction temperature, reaction time, solvents and catalyst dosages were investigated in detail. MCM ‐41 immobilized acidic functional ionic liquid and chromium(III ) Schiff base complexes as heterogeneous catalysts can be easily recovered by simple filter treatment, exhibiting excellent stability and activity towards hexose conversion. Thus the heterogeneous catalysts were environment‐friendly for transforming biomass carbohydrates into fine chemicals.     

VOx/SBA-15催化剂上甲苯气相部分氧化

采用等体积浸渍法制备了不同负载量的VOx/SBA-15催化剂。UV-Vis和H2-TPR等表征结果表明,在较低钒负载量下,钒物种的分散程度较高,主要以孤立的VO4 3－以及少量聚合体V－O－V形式存在;钒负载量较高时会有大量的聚合体V－O－V甚至晶相V2O5出现,而且,催化剂的酸性随着钒物种的高度分散而降低。甲苯气相部分氧化反应结果表明,随着钒负载量的提高,苯甲醛的选择性先升后降,CO、CO2等选择性逐渐提高。这是由于催化剂存在大量的聚合体V－O－V和晶相V2O5时,聚集态钒物种表面较多的酸量促使苯甲醛深度氧化。在相同钒负载量下,催化剂VOx/SBA-15的钒物种分散状态优于VOx/MCM-41和VOx/SiO2,从而使得催化剂VOx/SBA-15呈现较高的苯甲醛选择性。     

Influence of Pore Structure on Catalytic Properties of Mesoporous Silica-supported Co-B Amorphous Alloys in Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol

Co‐B amorphous alloy catalysts supported on three kinds of mesoporous silica (common SiO₂, MCM‐41 and SBA‐15) have been systematically studied focusing on the effect of pore structure on the catalytic properties in liquid‐phase hydrogenation of cinnamaldehyde to cinnamyl alcohol (CMO). Structural characterization of a series of different catalysts was performed by means of N₂ adsorption, X‐ray diffraction, transmission electron microscopy, hydrogen chemisorption, and X‐ray photoelectron spectroscopy. Various characterizations revealed that the pore structure of supports profoundly influenced the particle size, location and dispersion degree of Co‐B amorphous alloys. Co‐B/SBA‐15 was found more active and selective to CMO than either Co‐B/SiO₂ or Co‐B/MCM‐41. The superior catalytic activity could be attributed to the higher active surface area, because most of Co‐B nanoparticles in Co‐B/SBA‐15 were located in the ordered pore channels of SBA‐15 rather than on the external surface as found in Co‐B/SiO₂ and Co‐B/MCM‐41. Meanwhile, the geometrical confinement effect of the ordered mesoporous structure of SBA‐15 was considered to be responsible for the enhanced selectivity to CMO on Co‐B/SBA‐15, inhibiting the further hydrogenation of CMO to hydrocinnamyl alcohol.     

A Cheap and Efficient Methodology for the Solvent‐Free,One‐pot and Multi‐component Synthesis of 3,4‐Dihydropyrimidin‐2(1H)‐ones Catalyzed by Mesoporous NH4H2PO4/MCM‐48 and Comparison of Its Catalytic Efficacy with NH4H2PO4/MCM‐41

The catalytic efficiency of ammonium dihydrogenphosphate was evaluated in the two heterogeneous forms of NH₄H₂PO₄/MCM‐48 and NH₄H₂PO₄/MCM‐41, as mesoporous catalysts, in the solvent free synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones through one‐pot three‐component condensation of ethyl acetoacetate, an aryl aldehyde and urea. Different reaction parameters including catalytic efficacy, solvent effect, and urea concentration are considered.