幂硬化粘塑性材料动态扩展裂纹尖端场的渐近解

采用弹性－粘塑性本构模型，对幂硬化粘塑性介质中反平面剪切动态扩展裂纹尖端的应力，应变场进行了渐近分析，给出了反平面剪切动态扩展纹尖端场的渐进方程。分析结果表明，在裂纹法端应力具有（ｌｎＲ／ｒ）１／ｎ－１的奇异性，应变具有（ｌｎＲ／Ｒｎ／ｎ－１的奇异性。从而提示了幂硬化粘塑材料反平面剪动态扩展裂纹尖端场的渐近行为。     

Dynamic crack-tip fields in rate-sensitive solids

The asymptotic stress and strain fields near the tip of a crack which propagates dynamically in a rate-sensitive solid are obtained under anti-plane shear and plane strain conditions. The problem is formulated within the context of a small-strain theory for a solid whose mechanical behavior under high strain rates is described by an elastic-viscoplastic constitutive relation. It is shown that, if the stresses are singular at the crack-tip, the viscoplastic relation is equivalent asymptotically to an elastic-non-linear viscous relation. Furthermore, for a certain range of the material parameter which characterizes the rate-sensitivity of the material, the elastic strain-rates near the propagating crack tip are shown to have the same asymptotic radial dependence near the propagating crack-tip as the inelastic strain-rates. This determines the order of the stress singularity uniquely. The governing equations for anti-plane shear and plane strain are then derived. The numerical results for the stress and strain fields are presented for anti-plane shear and plane strain. For the present model, the results suggest that under small-scale yielding conditions, there exists a minimum velocity for stable steady crack propagation. The implication that a terminal velocity for a running crack may exist is also discussed.     

ASYMPTOTIC DYNAMIC SOLUTION TO THE MODE PROPAGATING CRACK-TIP FIELD IN ELASTIC- VISCOPLASTIC MATERIAL

A new elastic-viscoplastic mode was proposed to analyze the stress and strain fields surrounding the tip of a propagating mode Ⅰ cracks. A proper displacement pattern was suggested and asymptotic equations were derived, and numerical solutions were illustrated. The analysis and calculation show that the crack-tip field is of logarithmic singularity for smaller viscosity, however no solution exists for large viscosity. By a careful analysis and comparison, it is found that the present results retain all merits of those given by Gao Yu-chen, while removing existing problems.     

粘弹塑性材料动态裂纹尖端场

本文采用一种弹性/粘塑性模型,对扩展裂纹尖端应力应变场进行了渐近分析。文中假定,弹性阶段的粘性效应可以略去,仅在塑性应变中粘性才起作用。对这种模型,文中导出了一种率敏感型的本构关系。并进一步导出了裂纹尖端应力应变场的动力学方程。通过量级分析,给出了尖端场的应力应变奇异性指数。并且讨论了弹性,塑性及粘性三者的匹配条件。对Ⅲ型裂纹进行了具体的分析计算。对各个不同参数的选取进行了详细的分析,讨论了解的性质随各参数的变化规律。     

Elastic-viscoplastic field at mixed-mode interface crack-tip under compression and shear

For a compression-shear mixed mode interface crack, it is difficult to solve the stress and strain fields considering the material viscosity, the crack-tip singularity, the frictional effect, and the mixed loading level. In this paper, a mechanical model of the dynamic propagation interface crack for the compression-shear mixed mode is proposed using an elastic-viscoplastic constitutive model. The governing equations of propagation crack interface at the crack-tip are given. The numerical analysis is performed for the interface crack of the compression-shear mixed mode by introducing a displacement function and some boundary conditions. The distributed regularities of stress field of the interface crack-tip are discussed with several special parameters. The final results show that the viscosity effect and the frictional contact effect on the crack surface and the mixed-load parameter are important factors in studying the mixed mode interface crack- tip fields. These fields are controlled by the viscosity coefficient, the Mach number, and the singularity exponent.     

ASYMPTOTIC DYNAMIC SOLUTION TO THE MODE Ⅰ PROPAGATING CRACK-TIP FIELD IN ELASTIC-VISCOPLASTIC MATERIAL

A new elastic-viscoplastic mode was proposed to analyze the stress and strain fields surrounding the tip of a propagating mode Ⅰ cracks. A proper displacement pattern was suggested and asymptotic equations were derived, and numerical solutions were illustrated. The analysis and calculation show that the crack-tip field is of logarithmic singularity for smaller viscosity, however no solution exists for large viscosity. By a careful analysis and comparison, it is found that the present results retain all merits of those given by Gao Yu-chen, while removing existing problems.     

Perfect elastic-viscoplastic field at mode Ⅰ dynamic propagating crack-tip

The viscosity of material is considered at propagating crack-tip. Under the assumption that the artificial viscosity coefficient is in inverse proportion to power law of the plastic strain rate, an elastic-viscoplastic asymptotic analysis is carried out for moving crack-tip fields in power-hardening materials under plane-strain condition. A continuous solution is obtained containing no discontinuities. The variations of numerical solution are discussed for mode Ⅰ crack according to each parameter. It is shown that stress and strain both possess exponential singularity. The elasticity, plasticity and viscosity of material at crack-tip only can be matched reasonably under linear-hardening condition. And the tip field contains no elastic unloading zone for mode Ⅰ crack. It approaches the limiting case, crack-tip is under ultra-viscose situation and energy accumulates, crack-tip begins to propagate under different compression situations.     

I型定常扩展裂纹尖端的弹黏塑性场

考虑材料在扩展裂纹尖端的黏性效应，假设黏性系数与塑性应变率的幂次成反比，对幂硬化材料中平面应变扩展裂纹尖端场进行了弹黏塑性渐近分析，得到了不含间断的连续解，并讨论了I型裂纹数值解的性质随各参数的变化规律. 分析表明应力和应变均具有幂奇异性，并且只有在线性硬化时，尖端场的弹、黏、塑性才可以合理匹配. 对于I型裂纹，裂尖场不含弹性卸载区. 当裂纹扩展速度趋于零时，动态解趋于准静态解，表明准静态解是动态解的特殊形式；如果进一步考虑硬化系数为零的极限情况，便可退化为Hui和Riedel的非线性黏弹性解.     

Field structure at mode Ⅲ dynamically propagating crack tip in elastic-viscoplastic materials

An elastic-viscoplastic mechanics model is used to investigate asymptotically the mode Ⅲ dynamically propagating crack tip field in elastic-viscoplastic materials. The stress and strain fields at the crack tip possess the same power-law singularity under a linear-hardening condition. The singularity exponent is uniquely determined by the viscosity coefficient of the material. Numerical results indicate that the motion parameter of the crack propagating speed has little effect on the zone structure at the crack tip. The hardening coefficient dominates the structure of the crack-tip field. However, the secondary plastic zone has little influence on the field. The viscosity of the material dominates the strength of stress and strain fields at the crack tip while it does have certain influence on the crack-tip field structure. The dynamic crack-tip field degenerates into the relevant quasi-static solution when the crack moving speed is zero. The corresponding perfectly-plastic solution is recovered from the linear-hardening solution when the hardening coefficient becomes zero.     

双材料界面裂纹复应力强度因子的正则化边界元法

双材料界面裂纹渐近位移和应力场表现出剧烈的振荡特性, 许多用于表征经典平方根($r^{1/2})$和负平方根($r^{-1/2})$渐近物理场的传统数值方法失效, 给界面裂纹复应力强度因子($K_{1} +{i}K_{2} )$的精确求解增加了难度. 引入一种含有复振荡因子的新型"特殊裂尖单元", 可精确表征裂纹尖端渐近位移和应力场的振荡特性, 在避免裂尖区域高密度网格剖分的情况下, 可实现双材料界面裂纹复应力强度因子的精确求解. 此外, 结合边界元法中计算近奇异积分的正则化算法, 成功求解了大尺寸比(超薄)双材料界面裂纹的断裂力学参数. 数值算例表明, 所提算法稳定, 效率高, 在不增加计算量的前提下, 显著提高了裂尖近场力学参量和断裂力学参数的求解精度和数值稳定性.      

Plane-stress crack-tip stress fields for orthotropic perfectly-plastic materials

Under the hypothesis that the stress components of crack-tip fields are only thefunctions ofθ,the differential equations of plane-stress crack-tip stress fields fororthotropic perfectly-plastic materials are obtained by using Hill’s yield condition andequilibrium equations.By combining the general analytical expression with the numericalmethod the crack-tip stress fields for orthotropic perfectly-plastic materials for plane stressare presented.     

Field structure at mode III dynamically propagating crack tip in elastic-viscoplastic materials

An elastic-viscoplastic mechanics model is used to investigate asymptotically the mode Ⅲ dynamically propagating crack tip field in elastic-viscoplastic materials. The stress and strain fields at the crack tip possess the same power-law singularity under a linear-hardening condition. The singularity exponent is uniquely determined by the viscosity coefficient of the material. Numerical results indicate that the motion parameter of the crack propagating speed has little effect on the zone structure at the crack tip. The hardening coefficient dominates the structure of the crack-tip field. However, the secondary plastic zone has little influence on the field. The viscosity of the material dominates the strength of stress and strain fields at the crack tip while it does have certain influence on the crack-tip field structure. The dynamic crack-tip field degenerates into the relevant quasi-static solution when the crack moving speed is zero. The corresponding perfectly-plastic solution is recovered from the linear-hardening solution when the hardening coefficient becomes zero.     

Perfect elastic-viscoplastic field at mode I dynamic propagating crack-tip

The viscosity of material is considered at propagating crack-tip. Under the assumption that the artificial viscosity coefficient is in inverse proportion to power law of the plastic strain rate, an elastic-viscoplastic asymptotic analysis is carried out for moving crack-tip fields in power-hardening materials under plane-strain condition. A continuous solution is obtained containing no discontinuities. The variations of numerical solution are discussed for mode I crack according to each parameter. It is shown that stress and strain both possess exponential singularity. The elasticity, plasticity and viscosity of material at crack-tip only can be matched reasonably under linear-hardening condition. And the tip field contains no elastic unloading zone for mode I crack. It approaches the limiting case, crack-tip is under ultra-viscose situation and energy accumulates, crack-tip begins to propagate under different compression situations.     

Thin Hyperelastic sheets of compressible material: Field equations, airy stress function and an application in fracture mechanics

The equations of the equilibrium theory of thin hyperelastic sheets under plane stress condition and the associated Airy stress function are deduced for a compressible Mooney-Rivlin material. Such an analysis is then employed to formulate a nonlinear fracture mechanics problem. By means of an asymptotic procedure, the deformation and stress singular fields in proximity of the crack-tip are computed.     

Fields near a rapidly propagating crack-tip in an elastic perfectly-plastic material

Dynamic effects are investigated for the steady-state fields of stress and deformation in the immediate vicinity of a rapidly propagating crack-tip in an elastic perfectly-plastic material. Both the cases of antiplane strain and in-plane strain have been considered. The governing equations in the plastic regions are hyperbolic in nature. Simple wave solutions together with uniform fields provide explicit asymptotic expressions for the stresses and the strains in the near-tip regions. The dynamic solutions describe a region of plastic loading which completely surrounds the propagating crack-tip.     

Ⅲ型扩展裂纹尖端场渐近解的研究

本文采用弹性-粘塑性模型对反平面剪切扩展裂纹问题进行了研究。文中通过对动态扩展问题和准静态扩展问题的分析得到了各自的渐近解,并且证明了准静态扩展解是动态扩展解的特殊情况,从而使二者统一起来。     

Elastic-viscoplastic fields near the tip of a propagating crack under anti-plane shear

The elastic-viscoplastic model proposed by Bingham was used to analyse the stress and strain surrounding the tip of a propagating crack under antiplane shear. The proper displacement pattern was given ; the asymptotic equations were derived and solved numerically. The analysis and calculation show that for smaller viscosity the crack-tip possesses logarthmic singularity, and for larger viscosity it possesses power-law singularity.In critical case, the two kinds of singularity are consistent with each other. The result revealed the important role of viscosity for crack-tip field.     

稳恒扩展裂纹尖端的弹粘塑性场

采用弹粘塑性力学模型代替通常的弹塑性模型，对于I型和Ⅱ型问题，分别求得了不可压缩材料中平面应变动态扩展裂纹尖端的指数奇异性场和对数奇异性场，消除了弹塑性解中存在的塑性激波。通过数值计算，分别求得了两种奇异属性的分界线，建立起统一的裂纹尖端奇异性场。