Enhancement of Oxygen Evolution Activity of Nickel Oxyhydroxide by Electrolyte Alkali Cations

Herein, the effect of the alkali cation (Li⁺, Na⁺, K⁺, and Cs⁺) in alkaline electrolytes with and without Fe impurities is investigated for enhancing the activity of nickel oxyhydroxide (NiOOH) for the oxygen evolution reaction (OER). Cyclic voltammograms show that Fe impurities have a significant catalytic effect on OER activity; however, both under purified and unpurified conditions, the trend in OER activity is Cs⁺ > Na⁺ > K⁺ > Li⁺, suggesting an intrinsic cation effect of the OER activity on Fe‐free Ni oxyhydroxide. In situ surface enhanced Raman spectroscopy (SERS), shows this cation dependence is related to the formation of superoxo OER intermediate (NiOO^?). The electrochemically active surface area, evaluated by electrochemical impedance spectroscopy (EIS), is not influenced significantly by the cation. We postulate that the cations interact with the Ni?OO^? species leading to the formation of NiOO^??M⁺ species that is stabilized better by bigger cations (Cs⁺). This species would then act as the precursor to O₂ evolution, explaining the higher activity.     

An Interfacial View of Cation Effects on Electrocatalysis Systems

The identity of alkali metal cations in the electrolyte of electrocatalysis systems has been recently introduced as a crucial factor to tailor the kinetics and Faradaic efficiency of many electrocatalytic reactions. In this Minireview, we have summarized the recent advances in the molecular-level understanding of cation effects on relevant electrocatalytic processes such as hydrogen evolution (HER), oxygen evolution (OER), and CO₂ electroreduction (CO₂RR) reactions. The discussion covers the effects of electrolyte cations on interfacial electric fields, structural organization of interfacial water molecules, blocking the catalytic active sites, stabilization or destabilization of intermediates, and interfacial pHs. These cation-induced interfacial phenomena have been reported to impact the performance (activity, selectivity, and stability) of electrochemical reactions collaboratively or independently. We describe that although there is almost a general agreement on the relationship between the size of alkali cations and the activities of HER, OER, and CO₂RR, however, the mechanism by which the performance of these electrocatalytic reactions is influenced by alkali metal cations is still in debate.     

Autologous Cobalt Phosphates with Modulated Coordination Sites for Electrocatalytic Water Oxidation

The correlation between metal coordination and electrocatalytic water oxidation performance is elusive in many cobalt‐based materials. Herein, we designed an ideal Co phosphate‐based platform to explore the effect of coordination environment on oxygen evolution reaction (OER) activity. The cobalt geometry was modulated from octahedral to tetrahedral by simple removal of water ligands in Co₃(PO₄)₂?8 H₂O. Other features except the coordination structure in the two autologous materials remain similar. The two analogues display the same OER kinetics, but the anhydrous Co₃(PO₄)₂ exhibits a greatly enhanced OER activity. On the basis of Raman and operando XAS results, the higher intrinsic activity of the Co tetrahedral sites is because they facilitate the formation of active high valent cobalt (hydr)oxide intermediates during OER. This work not only brings insights of OER on Co‐based electrocatalysts but also provides a reference system to study the effect of metal geometry on electrocatalysis.     

A soft molecular 2Fe–2As precursor approach to the synthesis of nanostructured FeAs for efficient electrocatalytic water oxidation

An unprecedented molecular 2Fe–2As precursor complex was synthesized and transformed under soft reaction conditions to produce an active and long-term stable nanocrystalline FeAs material for electrocatalytic water oxidation in alkaline media. The 2Fe2As-centred β-diketiminato complex, having an unusual planar Fe₂As₂ core structure, results from the salt-metathesis reaction of the corresponding β-diketiminato Fe^IICl complex and the AsCO⁻ (arsaethynolate) anion as the monoanionic As⁻ source. The as-prepared FeAs phase produced from the precursor has been electrophoretically deposited on conductive electrode substrates and shown to act as a electro(pre)catalyst for the oxygen evolution reaction (OER). The deposited FeAs undergoes corrosion under the severe anodic alkaline conditions which causes extensive dissolution of As into the electrolyte forming finally an active two-line ferrihydrite phase (Fe₂O₃(H₂O)_x). Importantly, the dissolved As in the electrolyte can be fully recaptured (electro-deposited) at the counter electrode making the complete process eco-conscious. The results represent a new and facile entry to unexplored nanostructured transition-metal arsenides and their utilization for high-performance OER electrocatalysis, which are also known to be magnificent high-temperature superconductors.

A molecularly derived FeAs has been used as an electro(pre)catalyst for an efficient alkaline OER for the first time and subsequently, its active structure has been determined by quasi in situ X-ray absorption spectroscopy and ex situ methods.     

Undesired Bulk Oxidation of LiMn2O4 Increases Overpotential of Electrocatalytic Water Oxidation in Lithium Hydroxide Electrolytes

Chemical and structural changes preceding electrocatalysis obfuscate the nature of the active state of electrocatalysts for the oxygen evolution reaction (OER), which calls for model systems to gain systematic insight. We investigated the effect of bulk oxidation on the overpotential of ink-casted LiMn₂O₄ electrodes by a rotating ring-disk electrode (RRDE) setup and X-ray absorption spectroscopy (XAS) at the K shell core level of manganese ions (Mn−K edge). The cyclic voltammogram of the RRDE disk shows pronounced redox peaks in lithium hydroxide electrolytes with pH between 12 and 13.5, which we assign to bulk manganese redox based on XAS. The onset of the OER is pH-dependent on the scale of the reversible hydrogen electrode (RHE) with a Nernst slope of −40(4) mV/pH at −5 μA monitored at the RRDE ring. To connect this trend to catalyst changes, we develop a simple model for delithiation of LiMn₂O₄ in LiOH electrolytes, which gives the same Nernst slope of delithiation as our experimental data, i. e., 116(25) mV/pH. From this data, we construct an E^RHE-pH diagram that illustrates robustness of LiMn₂O₄ against oxidation above pH 13.5 as also verified by XAS. We conclude that manganese oxidation is the origin of the increase of the OER overpotential at pH lower than 14 and also of the pH dependence on the RHE scale. Our work highlights that vulnerability to transition metal redox may lead to increased overpotentials, which is important for the design of stable electrocatalysts.     

Molecular Engineering of a 3D Self‐Supported Electrode for Oxygen Electrocatalysis in Neutral Media

Electrodes for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are required in energy conversion and storage technologies. An assembly strategy involves covalently grafting Co corrole 1 onto Fe₃O₄ nanoarrays grown on Ti mesh. The resulted electrode shows significantly improved activity and durability for OER and ORR in neutral media as compared to Fe₃O₄ alone and with directly adsorbed 1 . It also displays higher atom efficiency (at least two magnitudes larger turnover frequency) than reported electrodes. Using this electrode in a neutral Zn‐air battery, a small charge–discharge voltage gap of 1.19 V, large peak power density of 90.4 mW cm^?2, and high rechargeable stability for >100 h are achieved, opening a promising avenue of molecular electrocatalysis in a metal–air battery. This work shows a molecule‐engineered electrode for electrocatalysis and demonstrates their potential applications in energy conversion and storage.     

In situ X-ray absorption and diffraction studies of carbon coated LiFe1/4Mn1/4Co1/4Ni1/4PO4 cathode during first charge

Synchrotron based in situ X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD) techniques are used to study electronic and crystal structure changes of the carbon coated LiFe_1/4Mn_1/4Co_1/4Ni_1/4PO₄ (LiFe_1/4Mn_1/4Co_1/4Ni_1/4PO₄/C) cathode material for Li-ion batteries during the first charge. In situ Fe, Mn, Co and Ni K-edge XAS results revealed that the three voltage plateaus at ～3.6, 4.2 and 4.7 V vs. Li/Li⁺ are attributed to the redox reactions of Fe²⁺/Fe³⁺, Mn²⁺/Mn³⁺ and Co²⁺/Co³⁺, respectively, while the apparent capacities above 4.9 V is not originated from the Ni²⁺/Ni³⁺ redox, but very likely from the electrolyte decomposition. Interesting phase transition behaviors of LiFe_1/4Mn_1/4Co_1/4Ni_1/4PO₄/C were observed with the formation of an intermediate phase and the solid solution regions. Combined in situ XAS and XRD techniques indicate fast electronic structural changes and slow bulk crystal structural changes.     

Trapped interfacial redox introduces reversibility in the oxygen reduction reaction in a non-aqueous Ca2+ electrolyte

Electrochemical investigations of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) have been conducted in a Ca²⁺-containing dimethyl sulfoxide electrolyte. While the ORR appears irreversible, the introduction of a tetrabutylammonium perchlorate (TBAClO₄) co-salt in excess concentrations results in the gradual appearance of a quasi-reversible OER process. Combining the results of systematic cyclic voltammetry investigations, the degree of reversibility depends on the ion pair competition between Ca²⁺ and TBA⁺ cations to interact with generated superoxide (O₂⁻). When TBA⁺ is in larger concentrations, and large reductive overpotentials are applied, a quasi-reversible OER peak emerges with repeated cycling (characteristic of formulations without Ca²⁺ cations). In situ Raman microscopy and rotating ring-disc electrode (RRDE) experiments revealed more about the nature of species formed at the electrode surface and indicated the progressive evolution of a charge storage mechanism based upon trapped interfacial redox. The first electrochemical step involves generation of O₂⁻, followed primarily by partial passivation of the surface by Ca_xO_y product formation (the dominant initial reaction). Once this product matrix develops, the subsequent formation of TBA⁺--O₂⁻ is contained within the Ca_xO_y product interlayer at the electrode surface and, consequently, undergoes a facile oxidation reaction to regenerate O₂.

An interlayer product of oxygen reduction with Ca²⁺/TBA⁺ yields a quasi-reversible oxygen evolution reaction by inducing a trapped interfacial redox process.     

Lithium Salt Dissociation Promoted by 18-Crown-6 Ether Additive toward Dilute Electrolytes for High Performance Lithium Oxygen Batteries

Lithium-oxygen batteries (LOBs) are well known for their high energy density. However, their reversibility and rate performance are challenged due to the sluggish oxygen reduction/evolution reactions (ORR/OER) kinetics, serious side reactions and uncontrollable Li dendrite growth. The electrolyte plays a key role in transport of Li⁺ and reactive oxygen species in LOBs. Here, we tailored a dilute electrolyte by screening suitable crown ether additives to promote lithium salt dissociation and Li⁺ solvation through electrostatic interaction. The electrolyte containing 100 mM 18-crown-6 ether (100-18C6) exhibits enhanced electrochemical stability and triggers a solution-mediated Li₂O₂ growth pathway in LOBs, showing high discharge capacity of 10 828.8 mAh g_carbon⁻¹. Moreover, optimized electrode/electrolyte interfaces promote ORR/OER kinetics on cathode and achieve dendrite-free Li anode, which enhances the cycle life. This work casts new lights on the design of low-cost dilute electrolytes for high performance LOBs.     

Electrocatalytic Activity of Immobilized Co(II) on Porous Graphene Aerogels

The highly‐porous graphene aerogel (GA) with BET surface area of 810 m² g^?1 and three‐dimensional structure has been successfully fabricated using the hydrothermal technique. The modified glassy carbon electrode was then prepared by casting the graphene aerogel solution followed by immersing the GA/GCE in Co⁺² solution. The results showed that graphene aerogels improved the adsorption ability of the Co (II) ions. The electrocatalysis of oxygen evolution reaction (OER) at the Co‐GA modified glassy carbon elec‐ trode (Co‐GA/GCE) has been investigated using linear sweep voltammetry (LSV) in alkaline solution. The OER was noticeably enhanced at Co‐GA/GCE, representing a negative shift in the LSV curve at the Co‐GA/GCE compared to that obtained at the bare GCE. The high electrocatalytic activity, good reproducibility and low cost of proposed electrode provides desired characteristics of a potential candi‐ date in the industrial water electrolysis process.     

Reducing the Ir−O Coordination Number in Anodic Catalysts based on IrOx Nanoparticles towards Enhanced Proton-exchange-membrane Water Electrolysis

Due to the robust oxidation conditions in strong acid oxygen evolution reaction (OER), developing an OER electrocatalyst with high efficiency remains challenging in polymer electrolyte membrane (PEM) water electrolyzer. Recent theoretical research suggested that reducing the coordination number of Ir−O is feasible to reduce the energy barrier of the rate-determination step, potentially accelerating the OER. Inspired by this, we experimentally verified the Ir−O coordination number's role at model catalysts, then synthesized low-coordinated IrO_x nanoparticles toward a durable PEM water electrolyzer. We first conducted model studies on commercial rutile-IrO₂ using plasma-based defect engineering. The combined in situ X-ray absorption spectroscopy (XAS) analysis and computational studies clarify why the decreased coordination numbers increase catalytic activity. Next, under the model studies’ guidelines, we explored a low-coordinated Ir-based catalyst with a lower overpotential of 231 mV@10 mA cm⁻² accompanied by long durability (100 h) in an acidic OER. Finally, the assembled PEM water electrolyzer delivers a low voltage (1.72 V@1 A cm⁻²) as well as excellent stability exceeding 1200 h (@1 A cm⁻²) without obvious decay. This work provides a unique insight into the role of coordination numbers, paving the way for designing Ir-based catalysts for PEM water electrolyzers.     

Nanoscale bimetallic catalysts: are they really bimetallic?

The existence of bimetallic particles (and their reducibility and location on/or in the support) in Ru–Co/NaY and Pt–Co/NaY samples has been studied by in situ X-ray adsorption spectroscopy (XAS). It is established that in Ru–Co/NaY the monometallic clusters maintain their identity, whereas in Pt–Co/NaY the existence of small bimetallic particles can be established. In both cases the results are supported by other techniques, such as XPS and temperature-programmed reduction. Copyright © 2002 John Wiley & Sons, Ltd.     

Dual-Role of Polyelectrolyte-Tethered Benzimidazolium Cation in Promoting CO2/Pure Water Co-Electrolysis to Ethylene

Electrochemical CO₂ reduction reaction (CO₂RR), as a promising route to realize negative carbon emissions, is known to be strongly affected by electrolyte cations (i.e., cation effect). In contrast to the widely-studied alkali cations in liquid electrolytes, the effect of organic cations grafted on alkaline polyelectrolytes (APE) remains unexplored, although APE has already become an essential component of CO₂ electrolyzers. Herein, by studying the organic cation effect on CO₂RR, we find that benzimidazolium cation (Beim⁺) significantly outperforms other commonly-used nitrogenous cations (R₄N⁺) in promoting C₂₊ (mainly C₂H₄) production over copper electrode. Cyclic voltammetry and in situ spectroscopy studies reveal that the Beim⁺ can synergistically boost the CO₂ to *CO conversion and reduce the proton supply at the electrocatalytic interface, thus facilitating the *CO dimerization toward C₂₊ formation. By utilizing the homemade APE ionomer, we further realize efficient C₂H₄ production at an industrial-scale current density of 331 mA cm⁻² from CO₂/pure water co-electrolysis, thanks to the dual-role of Beim⁺ in synergistic catalysis and ionic conduction. This study provides a new avenue to boost CO₂RR through the structural design of polyelectrolytes.     

Cobalt Doped Titanium Dioxide Nanoparticles: Synthesis,Characterization and Electrocatalytic Study

In this work, green synthesis of cobalt doped titanium dioxide (Co‐TiO₂) has been carried out in aqueous medium using gelatin. The Co‐TiO₂ particles have been characterized using transmission electron microscopy (TEM), X‐ray diffraction (XRD), energy dispersive X‐ray (EDAX), FT‐IR spectroscopy and voltammetry techniques. XRD results show pure Co‐TiO₂ and TiO₂ powders with average crystallite size about 12 nm and 15 nm, respectively. Co loaded in TiO₂ hasn't influence crystalline structure. Moreover, efficient Co‐TiO₂‐based anode was fabricated by casting of the Co‐TiO₂ solution on glassy carbon electrode (Co‐TiO₂/GCE). The electrocatalysis of oxygen evolution reaction (OER) at Co‐TiO₂/GCE has been examined using linear scanning voltammetry (LSV) in alkaline media. The OER is significantly enhanced at Co‐TiO₂/GCE, as demonstrated by a negative shift in the LSV curve at the Co‐TiO₂/GCE compared to that obtained at the unmodified one. The value of energy saving of oxygen gas at a current density of 5 mA cm^?2 is 12.6 kW h kg^?1. The low cost as well as the marked stability of the modified electrode make it promising candidate in industrial water electrolysis process.     

Cations Insertion in Molybdenum Cluster Compounds: Electronic Structure and Electrochemical Study Using Cavity Microelectrode

Owing to the high lability of cations in the three-dimensional framework of K_1+x Mo₁₂S₁₄ (0 ≤ x ≤ 1.6), first-principles calculations and electrochemical methods have been carried out to study the insertion of cations in the empty channels of this compound. The cavity microelectrode that is a suitable electrode for powder material analysis has been used in voltammetric experiments. Results obtained for Li⁺, Na⁺, Rb⁺, K⁺, Cs⁺ and NH₄ ⁺ cations are presented and discussed.     

Tailoring Oxygen Vacancy on Co3O4 Nanosheets with High Surface Area for Oxygen Evolution Reaction?

Electrochemical water splitting requires efficient water oxidation catalysts to accelerate the sluggish kinetics of water oxidation reaction. Here, we designed an efficient Co₃O₄ electrocatalyst using a pyrolysis strategy for oxygen evolution reaction (OER). Morphological characterization confirmed the ultra-thin structure of nanosheet. Further, the existence of oxygen vacancies was obviously evidenced by the X-ray photoelectron spectroscopy and electron spin resonance spectroscopy. The increased surface area of Co₃O₄ ensures more exposed sites, whereas generated oxygen vacancies on Co₃O₄ surface create more active defects. The two scenarios were beneficial for accelerating the OER across the interface between the anode and electrolyte. As expected, the optimized Co₃O₄ nanosheets can catalyze the OER efficiently with a low overpotential of 310 mV at current density of 10 mA/cm² and remarkable long-term stability in 1.0 mol/L KOH.     

The Remarkable Effect of the Manganese Ion with Dioxygen on the Stability of π‐Conjugated Radical Cations

In this paper, nanosecond laser flash photolysis has been used to investigate the influence of metal ions on the kinetics of radical cations of a range of carotenoids (astaxanthin (ASTA), canthaxanthin (CAN), and β‐carotene (β‐CAR)) and various electron donors (1,4‐diphenyl‐1,3‐butadiene (14DPB), 1,6‐diphenyl‐1,3,5‐hexatriene (16DPH), 4‐methoxy‐trans‐stilbene (4 MeOSt), and trans‐stilbene (trans‐St)) in benzonitrile. Radical cations have been generated by means of photosensitized electron‐transfer (ET) using 1,4‐dicyanonaphthalene (14DCN) and biphenyl (BP). The kinetic decay of CAR ^{. +} shows a strong dependence on the identity of the examined metal ion. For example, whereas NaClO₄ has a weak effect on the kinetics of CAR ^{. +}, Ni(ClO₄)₂ causes a strong retardation of the decay of CAR ^{. +}. It is also interesting to note that Mn²⁺, which is a biologically relevant metal ion, shows the strongest effect of all the investigated metal ions (e.g., in the presence of Mn²⁺ ions, the half‐life (t_1/2) of CAN ^{. +} (t_1/2>90 ms) is more than three orders of magnitude higher than in the absence of the metal ions (t_1/2≈16 μs)). Furthermore, the influence of metal‐ion and oxygen concentrations on the kinetics of CAR ^{. +} reveals their pronounced effect on the kinetic decay of CAR ^{. +}. However, these remarkable effects are greatly diminished if either oxygen or metal ions are removed from the investigated solutions. Therefore, it can be concluded that oxygen and metal ions interact cooperatively to induce the observed substantial effects on the stabilities of CAR ^{. +}. These results are the first direct observation of the major role of oxygen in the stabilization of radical cations, and they support the earlier mechanism proposed by Astruc et al. for the role of oxygen in the inhibition of cage reactions. On the basis of these results, the factors that affect the stability of radical cations are discussed and the mechanism that shows the role of oxygen and metal ions in the enhancement of radical‐cation stability is described.     

An Asymmetric Supercapacitor–Diode (CAPode) for Unidirectional Energy Storage

A new asymmetric capacitor concept is proposed providing high energy storage capacity for only one charging direction. Size‐selective microporous carbons (w<0.9 nm) with narrow pore size distribution are demonstrated to exclusively electrosorb small anions (BF₄^?) but size‐exclude larger cations (TBA⁺ or TPA⁺), while the counter electrode, an ordered mesoporous carbon (w>2 nm), gives access to both ions. This architecture exclusively charges in one direction with high rectification ratios (RR=12), representing a novel capacitive analogue of semiconductor‐based diodes (“CAPode”). By precise pore size control of microporous carbons (0.6 nm, 0.8 nm and 1.0 nm) combined with an ordered mesoporous counter electrode (CMK‐3, 4.8 nm) electrolyte cation sieving and unidirectional charging is demonstrated by analyzing the device charge‐discharge response and monitoring individual electrodes of the device via in situ NMR spectroscopy.     

Co doped ZnO nanowires as visible light photocatalysts

High aspect ratio cobalt doped ZnO nanowires showing strong photocatalytic activity and moderate ferromagnetic behaviour were successfully synthesized using a solvothermal method and characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), vibrating sample magnetometry (VSM) and UV–visible absorption spectroscopy. The photocatalytic activities evaluated for visible light driven degradation of an aqueous methylene orange (MO) solution were higher than for Co doped ZnO nanoparticles at the same doping level and synthesized by the same synthesis route. The rate constant for MO visible light photocatalytic degradation was 1.9·10⁻³ min⁻¹ in case of nanoparticles and 4.2·10⁻³ min⁻¹ in case of nanowires. We observe strongly enhanced visible light photocatalytic activity for moderate Co doping levels, with an optimum at a composition of Zn_0.95Co_0.05O. The enhanced photocatalytic activities of Co doped ZnO nanowires were attributed to the combined effects of enhanced visible light absorption at the Co sites in ZnO nanowires, and improved separation efficiency of photogenerated charge carriers at optimal Co doping.     

Chemical and electronic characterization of cobalt in a lanthanum perovskite. Effects of strontium substitution

Two different cobaltites, LaCoO₃ and La_0.5Sr_0.5CoO_3−δ, have been prepared and characterized by means of high energy Co K-edge and low energy O K-edge X-ray absorption spectroscopy (XAS). Even though half of the La(III) is substituted by Sr(II), little or no changes can be detected in the formal oxidation state of cobalt atoms. The presence of strontium cations induces two main effects in the chemical and electronic state of the perovskite. The charge balance with Sr(II) species is reached by the formation of oxygen vacancies throughout the network, which explains the well-known increase in the reactivity of this substituted perovskite. O K-edge XAS experiments show that the Sr(II) species induce the transitions of d electrons of cobalt cations from low to high spin configuration. We propose that this change in spin multiplicity is induced by two cooperative effects: the oxygen vacancies, creating five coordinated cobalt atoms, and the bigger size of Sr(II) cations, aligning the Co-O-Co atoms, and favoring the overlapping of π-symmetry cobalt and oxygen orbitals, reducing the splitting energy of e_g and t_2g levels.