Selective complexation of alkali metal ions and nanotubular cyclopeptides: a DFT study

A density functional theory based on interaction of alkali metal cations (Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺) with cyclic peptides constructed from 3 or 4 alanine molecule (CyAla3 and CyAla4), has been investigated using mixed basis set (C, H, O, Li⁺, Na⁺ and K⁺ using 6-31+G(d), and the heavier cations: Rb⁺ and Cs⁺ using LANL2DZ). The minimum energy structures, binding energies, and various thermodynamic parameters of free ligands and their metal cations complexes have been determined with B3LYP and CAM-B3LYP functionals. The order of interaction energies were found to be Li⁺ > K⁺ > Na⁺ > Rb⁺ > Cs⁺ and Li⁺ > Na⁺ > K⁺ ? Rb⁺ > Cs⁺, calculated at CAM-B3LYP level for the M/CyAla3 and M/CyAla4 complexes, respectively. Their selectivity trend shows that the highest cation selectivity for Li⁺ over other alkali metal ions has been achieved on the basis of thermodynamic analysis. The main types of driving force host–guest interactions are investigated, the electron-donating O offers lone pair electrons to the contacting LP* of alkali metal cations.     

Cation exchange, interlayer spacing, and thermal analysis of Na/Ca-montmorillonite modified with alkaline and alkaline earth metal ions

Na-montmorillonites were exchanged with Li⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺, while Ca-montmorillonites were treated with alkaline and alkaline earth ions except for Ra²⁺ and Ca²⁺. Montmorillonites with interlayer cations Li⁺ or Na⁺ have remarkable swelling capacity and keep excellent stability. It is shown that metal ions represent different exchange ability as follows: Cs⁺?>?Rb⁺?>?K⁺?>?Na⁺?>?Li⁺ and Ba²⁺?>?Sr²⁺?>?Ca²⁺?>?Mg²⁺. The cation exchange capacity with single ion exchange capacity illustrates that Mg²⁺ and Ca²⁺ do not only take part in cation exchange but also produce physical adsorption on the montmorillonite. Although interlayer spacing d ₀₀₁ depends on both radius and hydration radius of interlayer cations, the latter one plays a decisive role in changing d ₀₀₁ value. Three stages of temperature intervals of dehydration are observed from the TG/DSC curves: the release of surface water adsorbed (36?C84?°C), the dehydration of interlayer water and the chemical-adsorption water (47?C189?°C) and dehydration of bound water of interlayer metal cation (108?C268?°C). Data show that the quantity and hydration energy of ions adsorbed on montmorillonite influence the water content in montmorillonite. Mg²⁺-modified Na-montmorillonite which absorbs the most quantity of ions with the highest hydration energy has the maximum water content up to 8.84%.     

Spectrophotometric studies of alkali and alkali earth metal ions complexes of mono amino derivative of calix[4]arene

The synthesis and complexive abilities of 5,11,17-tris(tert-butyl)-23 amino-25,26,27,28-tetra-propoxycalix[4]arene towards alkali cations Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺ and alkali earth cations Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ in methanol-chloroform mixture have been evaluated at 25°C, using UV-Vis spectrophotometric techniques. The results showed that the ligand is capable to complex with all the cations by 1: 1 metal to ligand ratios. The selectivity presented considering the calculated formation constants are in the order Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺ and Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺ with the ligand.     

Application of localized reactivity index in combination with periodic DFT calculation to rationalize the swelling mechanism of clay type inorganic material

Clays are layered alumino-silicates. Clays swell and expand in aqueous solution. This property governs the usage of these materials in synthesis of nano-composites and is a source of many of its catalytic applications. We used both localized and periodic calculations within the realm of density functional theory (DFT) on a series of monovalent (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺), and divalent (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺) cations, to monitor their effect on the swelling of clays. The activity order obtained for the exchangeable cations among all the monovalent and divalent series studied is: Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺ > Cs⁺ > Rb⁺ > Na⁺ > Li⁺ > K⁺. We have studied two types of clays, montmorillonite and beidellite, with different surface structures and with/without water using periodic calculations. We have calculated the layer spacing at the first, second and third hydration shells of exchangeable cation, to compare with the experimentald-spacing values to correlate with humidity. A novel quantitative scale is proposed in terms of the intermolecular relative nucleophilicity of the active cation sites in their hydrated state through Fukui functions using hard-soft acid base (HSAB) principle. Finally, a swelling mechanism is proposed. This is a unique study where a combination of periodic and localized calculations has been performed to validate the capability of reactivity index calculations in material designing.     

Unveiling the Electrolyte Cations Dependent Kinetics on CoOOH-Catalyzed Oxygen Evolution Reaction

The electrolyte cations-dependent kinetics have been widely observed in many fields of electrocatalysis, however, the exact mechanism of the influence on catalytic performance is still a controversial topic of considerable discussion. Herein, combined with operando X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM), we verify that the electrolyte cations could intercalate into the layer of pristine CoOOH catalyst during the oxygen evolution reaction (OER) process, while the bigger cations lead to enlarged interlayer spacing and increased OER activity, following the order Cs⁺>K⁺>Na⁺>Li⁺. X-ray absorption spectroscopy (XAS), in situ Raman, in situ Ultraviolet-visible (UV/Vis) spectroscopy, in situ XAS spectroscopy, cyclic voltammetry (CV), and theoretical calculations reveal that the intercalation of electrolyte cations efficiently modify the oxidation states of Co by enlarging the Co−O bonds, which in turn enhance the d-band center of Co, optimize the adsorption strength of oxygen intermediates, facilitate the formation of OER active Co(IV) species, and reduce the energy barrier of the rate-determing step (RDS), thereby enhancing the OER activity. This work not only provides an informative picture to understand the complicated dependence of OER kinetics on electrolyte cations, but also sheds light on understanding the mechanism of other electrolyte cation-targeted electrocatalysis.     

Application of Nafion／Cobalt Hexacyanoferrate Chemically Modified Electrodes for the Determination of Electroinactive Cations by Ion Chromatography

Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｉｏｎｃｈｒｏｍａｔｏｇｒａｐｈｙ (ＩＣ)ｈａｓｂｅｅｎｒｅｃｏｇｎｉｚｅｄａｓａｕｓｅｆｕｌｍｅｔｈｏｄｆｏｒｔｈｅｓｅｐａｒａｔｉｏｎｏｆｉｎｏｒｇａｎｉｃａｎｉｏｎｓａｎｄｃａｔｉｏｎｓｓｉｎｃｅｉｔｓｉｎｔｒｏｄｕｃｔｉｏｎｂｙＳｍａｌｌｅｔａｌ .ｉｎ 1975 .1ＡｓｉｇｎｉｆｉｃａｎｔｔｒｅｎｄｉｎｔｈｅｄｅｖｅｌｏｐｍｅｎｔｏｆＩＣｍｅｔｈｏｄｉｓｓｅａｒｃｈｆｏｒｓｅｎｓｉｔｉｖｅａｎｄｕｎｉｖｅｒｓａｌｄｅｔｅｃｔｉｏｎｍｅｔｈｏｄｓ .Ｔｈｅｍａｉｎｄｅｔ…     

Photophysical and photochemical processes in zeolite cavities: The effects of ion-exchanged alkalimetal cations on the excited states of xanthone and the photolysis of 2-pentanone

The characteristics properties of xanthone phosphorescence and of 2-pentanone photolysis in alkali metal cation-exchanged zeolites have been investigated to clarify the effect of the micro-environment of host-adsorbents on the photophysical and photochemical properties of guest-molecules in restricted void spaces. The enhancement of the phosphorescence yields of xanthone included in zeolites is observed by changing the exchangeablealkali metal cation from Li⁺ to Cs⁺. Simultaneously, the phosphorescence lifetimes were observed to continuously shorten by changing the cation from Li⁺ to Cs⁺. These results suggest that the external heavy-atom effect deriving from the alkali metal cations on the singlet-triplet transitions of xanthone molecules stabilized on alkali metal cations in the order of Li⁺, Na⁺, K⁺, Rb⁺, and Cs⁺. The yields for the photolysis of 2-pentanone included in zeolites increase with changing the alkali metal cation from Li⁺ to Cs⁺. IR investigations of the adsorption state of 2-pentanone indicate that strength of the interaction between the alkali metal cations and 2-pentanones decreases by changing the cation from Li⁺ to Cs⁺, which results in a longer lifetime of 2-pentanone. The selectivity of propylene formation is dramatically increased by changing the cation from Li⁺ to Cs⁺. The enhanced formation of propylene is asociated with the hydrogen absorption from propyl radicals by lattice oxygen, their basicity increasing by changing the cation from Li⁺ to Cs⁺. Thus, these changes in the zeolite cavities modified by exchanging cations caused significant effects not only on the excited state but also on the following chemical reactions of ketones.     

Hydration forces between mica surfaces in electrolyte solutions

The forces between two molecularly smooth mica surfaces were measured over a range of concentrations in aqueous Li⁺, Na⁺, K⁺ and Cs⁺ chloride solutions. Deviations from DLVO forces in the form of additional short-range repulsive “Hydration” forces were observed only above some critical bulk concentration, which was different for each electrolyte. These observations are interpreted in terms of the corresponding ion exchange properties at the mica surface. “hydration” forces apparently arise when hydrated cations adsorbed on mica are prevented from desorbing as two interacting surfaces approach. dehydration of the cations leads to a repulsive hydration force. A simple site-binding model was successfully applied to describe the charging behavior of interacting mica surfaces . By subtraction of the DLVO-regulation theory from the total measured force the net hydration force was obtained for mica surfaces apparently fully covered with adsorbed cations. The magnitude of this extra force followed the series Na⁺ > Li⁺ > K⁺ > Cs⁺ and, in each case, could be described by a double-exponential decay.     

Explanation of Ionic Sequences in Various Phenomena. I. Salting-Out of Uncharged Molecules

Abstract

Theoretical models for hydrated ions and their calculated effective dielectric constants obtained previously were used to explain the salting-in or salting-out of nonionic molecules. Three types of salting-out sequences were obtained: nonpolar (Na⁺ > K⁺ > Li⁺ Rb⁺ > Cs⁺), basic (K⁺ > Na⁺ > Rb⁺ > Cs⁺ > Li⁺), and acidic (Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺). The nonpolar sequence is not influenced by the A region of a cation, and therefore the ability to salt-out is great if the effective dielectric constant of the ion is small. The A region on hydrated Li⁺ ions (the tightly bound water) salts-in basic compounds because of the interaction of its positively charged hydrogen atoms with the negative dipolar charge of the base. Conversely, the A region of a cation salts-out acidic compounds because the hydroxyl group on carboxylic acids behaves as a similar cationic A region. A sulfonic polymer will cause the salting-in of the base p-nitroaniline because the addition of salts to an aqueous solution of the base and polymer destroys hydrogen bonds in the polymer and in so doing releases hydronium ions from the polymer. This release of H⁺, in turn, produces a positive charge on part of the p-nitroaniline molecules, which produces a salting-in effect.     

Oligoether‐Strapped Calix[4]pyrrole: An Ion‐Pair Receptor Displaying Cation‐Dependent Chloride Anion Transport

A ditopic ion‐pair receptor ( 1 ), which has tunable cation‐ and anion‐binding sites, has been synthesized and characterized. Spectroscopic analyses provide support for the conclusion that receptor 1 binds fluoride and chloride anions strongly and forms stable 1:1 complexes ([ 1? F]^? and [ 1? Cl]^?) with appropriately chosen salts of these anions in acetonitrile. When the anion complexes of 1 were treated with alkali metal ions (Li⁺, Na⁺, K⁺, Cs⁺, as their perchlorate salts), ion‐dependent interactions were observed that were found to depend on both the choice of added cation and the initially complexed anion. In the case of [ 1? F]^?, no appreciable interaction with the K⁺ ion was seen. On the other hand, when this complex was treated with Li⁺ or Na⁺ ions, decomplexation of the bound fluoride anion was observed. In contrast to what was seen with Li⁺, Na⁺, K⁺, treating [ 1?F ]^? with Cs⁺ ions gave rise to a stable, host‐separated ion‐pair complex, [F ?1? Cs], which contains the Cs⁺ ion bound in the cup‐like portion of the calix[4]pyrrole. Different complexation behavior was seen in the case of the chloride complex, [ 1? Cl]^?. Here, no appreciable interaction was observed with Na⁺ or K⁺. In contrast, treating with Li⁺ produces a tight ion‐pair complex, [ 1? Li ? Cl], in which the cation is bound to the crown moiety. In analogy to what was seen for [ 1? F]^?, treatment of [ 1? Cl]^? with Cs⁺ ions gives rise to a host‐separated ion‐pair complex, [Cl ?1? Cs], in which the cation is bound to the cup of the calix[4]pyrrole. As inferred from liposomal model membrane transport studies, system 1 can act as an effective carrier for several chloride anion salts of Group 1 cations, operating through both symport (chloride+cation co‐transport) and antiport (nitrate‐for‐chloride exchange) mechanisms. This transport behavior stands in contrast to what is seen for simple octamethylcalix[4]pyrrole, which acts as an effective carrier for cesium chloride but does not operates through a nitrate‐for‐chloride anion exchange mechanism.     

Diffusion mobility of alkali metals in perfluorinated sulfocationic and carboxylic membranes as probed by <Superscript>1</Superscript>H, <Superscript>7</Superscript>Li, <Superscript>23</Superscript>Na,and <Superscript>133</Superscript>Cs NMR spectroscopy

Water self-diffusion and ion mobilities in various ionic forms (H⁺, Li⁺, Na⁺, Rb⁺, Cs⁺, and Ba²⁺) of perfluorinated sulfocationic membranes MF-4SK were studied by NMR and impedance spectroscopy. When degrees of hydration are low, the self-diffusion coefficients of water and ionic conductivities are considerably affected by the water content of the membrane. The self-diffusion coefficients decrease in the order H⁺ > Ba²⁺ > Cs⁺ > Rb⁺ > Na⁺ > Li⁺, whereas the ion mobility decreases in the order H⁺ > Li⁺ > Na⁺ > Cs⁺ > Ba²⁺.     

Charge density-dependent coil–globule transition of alkali metal polycarboxylates in aqueous organic solvent mixtures

The effects of polymer charge density on the counterion-specific and solvent-specific coil–globule transition of polycarboxylates were investigated for alkali metal salts of poly(styrene-alt-maleic acid) (PSaltMA) and poly(acrylic acid) (PAA) in aqueous organic solvent mixtures. The order of the transition region, namely, the counterion specificity for the transition in, e.g., aqueous dimethyl sulfoxide (DMSO), was the same for both polyelectrolytes, Na⁺?>?K⁺?>?Cs⁺?>?Li⁺, while the discrepancy of the transition region between Na⁺ and Li⁺ systems was appreciably narrower for PSaltMA (approximately 20 vol%) than that of PAA (approximately 29 vol%). Such diminished counterion specificity for the former was ascribed to the nonuniform charge array. Namely, PSaltMA has two kinds of nearest charge arrays, one is the shorter spacing between the maleic acid carboxyl groups and the other is the longer one via one styrene group. Thus, the former may be favorable for binding of the smaller counterion (i.e., Li⁺) and the latter for the larger one (Cs⁺). Such a “size-fitting effect” for the counterion binding was in fact further confirmed with variously neutralized PAAs. For example, the counterion specificity in aqueous DMSO of PAA40 that was neutralized to 40 % was Cs⁺?>?K⁺?>?Na⁺?>?Li⁺, showing that the largest counterion becomes most favorable in inducing the transition with increasing average charge spacing. In fact, the nuclear magnetic resonance line width measurement for ¹³³Cs suggested that the counterion binding strength of the large counterion for PAA increases with decreasing charge density from 100 to 40 % neutralization.     

Complexation thermodynamics of some alkali-metal cations with 1,13-bis(8-quinolyl)-1,4,7,10,13-pentaoxatridecane in Acetonitrile

The interaction of 1,13-bis(8-quinolyl)-1,4,7,10,13-pentaoxatridecane (Kryptofix5) with alkali-metal cations (Li⁺, Na⁺, K⁺) in aprotic medium (acetonitrile) has been investigated. Conductance measurements demonstrated that 1:1 metal cation:ligand stoichiometries are found with these cations in this solvent. ⁷Li and ²³Na NMR experiments were carried out by titration of the metal cation solutions with Kryptofix5 solution in CD₃CN + CH₃CN at 298 K. Thermodynamic parameters of complexation for this ligand and alkali-metal cations in acetonitrile at 278–308 K were derived from titration conductometry. The highest stability is found for sodium complex. The complexation sequence, based on the value of log K at 278–308 K was found to be Na⁺ > K⁺ > Li⁺.     

Preparation of Thallium Hexacyanoferrate Film and Mixed‐Film Modified Electrodes with Cobalt(II) Hexacyanoferrate

Thallium hexacyanoferrate films have been prepared from various aqueous electrolyte solutions using consecutive cyclic voltammetry. The cyclic voltammograms recorded the direct deposition of thallium hexacyanoferrate films from the mixing of Tl³⁺ and [Fe(CN)₆]^3? ions from solutions of seven cations: Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, H⁺, and Tl⁺. An electrochemical quartz crystal microbalance (EQCM) and cyclic voltammetry were used to study the in situ growth of the thallium hexacyanoferrate films. The thallium hexacyanoferrate film shows a single redox couple with a formal potential between +0.6 V and +1.2 V, and shows a cation effect (H⁺, Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, and Tl⁺). A mixed film and a two‐layered modified electrodes composed of a thallium hexacyanoferrate film with cobalt(II) hexacyanoferrate film were prepared.     

Water self-diffusion and ionic conductivity in perfluorinated sulfocationic membranes MF-4SK

Water self-diffusion and ion mobilities in various ionic forms (H⁺, Li⁺, Na⁺, Rb⁺, Cs⁺, and Ba²⁺) of perfluorinated sulfocationic membranes MF-4SK were studied by NMR and impedance spectroscopy. When degrees of hydration are low, the self-diffusion coefficients of water and ionic conductivities are considerably affected by the water content of the membrane. The self-diffusion coefficients decrease in the order H⁺ > Ba²⁺ > Cs⁺ > Rb⁺ > Na⁺ > Li⁺, whereas the ion mobility decreases in the order H⁺ > Li⁺ > Na⁺ > Cs⁺ > Ba²⁺.     

Oxygen Isotope Labeling Experiments Reveal Different Reaction Sites for the Oxygen Evolution Reaction on Nickel and Nickel Iron Oxides

Nickel iron oxide is considered a benchmark nonprecious catalyst for the oxygen evolution reaction (OER). However, the nature of the active site in nickel iron oxide is heavily debated. Here we report direct spectroscopic evidence for the different active sites in Fe‐free and Fe‐containing Ni oxides. Ultrathin layered double hydroxides (LDHs) were used as defined samples of metal oxide catalysts, and ¹⁸O‐labeling experiments in combination with in situ Raman spectroscopy were employed to probe the role of lattice oxygen as well as an active oxygen species, NiOO^?, in the catalysts. Our data show that lattice oxygen is involved in the OER for Ni and NiCo LDHs, but not for NiFe and NiCoFe LDHs. Moreover, NiOO^? is a precursor to oxygen for Ni and NiCo LDHs, but not for NiFe and NiCoFe LDHs. These data indicate that bulk Ni sites in Ni and NiCo oxides are active and evolve oxygen via a NiOO^? precursor. Fe incorporation not only dramatically increases the activity, but also changes the nature of the active sites.     

Die Selektivität Kristalliner Cer(IV)-Phosphatsulfathydrate gegenüber Li+, Na+, K+, Rb+, Cs+ und NH in absolutem Methanol und absolutem Dimethylsulfoxid

Selectivity of Crystalline Ce^IV Phosphate Sulphate Hydrates for Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, and NH in Absolute Methanol and Absolute Dimethylsulphoxide The sequence of exchange capacities of Cerium(IV) phosphate sulphate hydrate (CePO₄)₂(HPO₄)_0.74(SO₄)_0.26 · 4,74 H₂O for alkalimetal ions and ammoniumions in absolute methanol at 25°C for the case of a small excess of the exchanger (in relation to the equivalent amount) is given by K⁺ > Rb⁺ ≥ NH₄⁺ > Cs⁺ > Na⁺ > Li⁺. Between the exchange capacity A of these cations and their ionic radii r (given by Ladd) exists the simple relation A = const./r. For Na⁺ the radius of the inner hydration shell must be considered. In absolute dimethyl-sulphoxide under the same conditions the sequence is K⁺ ≥ NH₄ > Rb⁺ > Na⁺ > Cs⁺ > Li⁺. For K⁺, NH₄, Rb⁺ and Cs⁺ the exchange capacity is given by A = const./r + const. · r⁴. The sequences of the alkali ions in both solvents are among the group of 13 sequences which are physicaly significant according to EISENMANNS 's theory. The results are compared with the observations made with water as solvent.     

Quantum simulation on donor and acceptor II calix[4]arene substrate and alkali metal ions: the driven inclusion

The energetic and structural optimized of a calix[4]arene with and without alkali-metal cations are presented with performance of various quantum chemical methods such as Hartree--Fock, second order Møller-Plesset perturbation theory, and density functional theory. The geometry optimizations have been carried out with the 3-21G (Li⁺--Cs⁺) and 3-21G(d,p) (Li⁺--K⁺) and the 3-21G basis sets for Cs⁺ and Rb⁺. Additional single-point energy ab initio calculations for Li⁺–K⁺ were carried out at HF/6--31G, HF/6-31G (d,p), HF/6--311G(d,p) for complexes of Li⁺ and Na⁺. The calculations were carried out to analyze the complexation of calix[4]arene with alkali metal cationic species (Li⁺, Na⁺, K⁺, Rb⁺, and Cs⁺). Assumption to isolate the effects of the aromatic core and cation-π interactions. Particular emphasis has been on conformational binding selectivity and the structural characterization of the complexes, the smaller cation as Li⁺ and Na⁺ has been placed in the lower rim's of the calix[4]arene's cavity. The large cations like K⁺, Rb⁺, and Cs⁺ take placed in upper rim and the endo (inclusive) complexation is driven by cation-π interactions, that reflect a superior interaction with two phenol rings. The endo complexation of Cs⁺ with calix[4]arene is in agreement with X-ray diffraction data. The binding modes of calixarene-cation systems are studied to involve cooperative effects between cation-π and electrostatic forces.     

Contribution to the thermodynamics of complexes of alkali metal cations with 18-crown-6 in the water—nitrobenzene extraction system

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M⁺(aq)+NaL⁺(nb)⇄ML⁺(nb)+Na⁺(aq) taking place in the two-phase water-nitrobenzene system (M⁺=Li⁺, K⁺, Rb⁺, Cs⁺; L=18-crown-6; aq = aqueous phase, nb = nitrobenzene phase) were evaluated. The stability constants of the ML⁺ complexes in nitrobenzene saturated with water were calculated; they are found to increase in the cation order Cs⁺Li⁺Na⁺Rb⁺K⁺. Further, the individual extraction constants for the NaL⁺, KL⁺, RbL⁺ and CsL⁺ complex species in the wate-nitrobenzene system were determined; their values increase in the series Na⁺Rb⁺Cs⁺K⁺.     

The Application of Cryptand 22 as a Bifunctional Stationary Phase for Ion Chromatography

Poly (styrene/divinyl benzene) with cryptand 22 as an anchoring group was synthesized and applied as a bifunctional packing material for the separation of both cations and anions. At pH < 2, the resin can be protonated and applied as an anion exchanger for the separation of anions; with water as eluent, inorganic anions such as F^?, Cl^?, Br^?, NO₃^?”, I^? were well separated. After deprotonation at pH> 10, the resin became a cation exchanger and successfully separated alkali metal ions such as Li⁺, K⁺ and Cs⁺ with methanol as eluent. The effects of solvents, flow rate and temperature on the separation of various ions were also investigated.