碳糊修饰电极吸附伏安法测定食品中的锑

研制了溴邻苯三酚红 (BPR)作修饰剂的碳糊修饰电极 ,并用此电极作工作电极建立了测定痕量锑的吸附伏安法。在选定的实验条件下 ,峰电流与Sb(Ⅲ )浓度在 8.0× 1 0 -9～ 2 .0× 1 0 -7mol L范围内呈线性关系 ,检出限为 2 .0×1 0 -9mol L ,1 0次测定相对标准偏差为 2 .0 % ,不用分离 ,可直接测定食品中痕量Sb(Ⅲ ) ,测定的回收率为 90 %～ 1 0 3%。     

溶胶凝胶溴离子选择电极的研制与应用

报道了一种以溶胶凝胶为载体的溴离子选择电极。电极信号响应线性范围为1 .0× 1 0 - 1～ 1 .0× 1 0 - 5mol/L,斜率为 5 7m V/pc;检出限为 2 .5× 1 0 - 6 mol/L。该电极响应快 ,体积小 ,稳定性和重现性好。电极用作测定溴离子浓度 ,结果令人满意     

多壁碳纳米管修饰电极同时测定维生素B2、B6、B12和维生素C

制备了多壁碳纳米管修饰玻碳电极(MWNT/GCE),研究了维生素B2、B6、B12和维生素C共存时在该电极上的电化学行为.实验发现,在HAc-NaAc缓冲溶液中,该电极可同时测定以上四种维生素,线性范围分别为1.0×10-6～1.0×10-4 mol/L、5.0×10-5～2.0×10-3 mol/L、5.0×10-5～7.5×10-4 mol/L和5.0×10-5～2.0×10-3 mol/L,其检出限分别为7.0×10-7 mol/L、1.0×10-5 mol/L、2.5×10-5 mol/L和5.0×10-6 mol/L.样品分析的RSD分别为1.66%、1.71%、2.26%和1.46%.方法简便快捷,可用于四种维生素同时分析测定.     

零流电位法对4-氨基联苯的检测

以铅笔芯电极(PGE)为工作电极,铂电极为对电极,饱和甘汞电极为参比电极,在含4. 0×10-3mol/L丙烯酸、1. 0×10-3mol/L 4-氨基联苯(4-ABP)的磷酸盐缓冲溶液(PBS,p H 7. 17)中,采用循环伏安法以0. 1 V·s-1在-1. 6～1. 6 V电位范围循环扫描16圈,经超声洗脱6 min后制得4-氨基联苯印迹聚合物修饰电极(4-ABP-MIP/PGE)。零流电位法下,在4-ABP浓度0. 005～50μmol/L范围内,4-ABP-MIP/PGE的零流电位EZCP与4-ABP浓度的对数呈线性关系,检出限为1. 07 nmol/L。将该传感器用于实际样品中4-ABP的检测,平均回收率为96. 0%～102%。     

流动注射化学发光测定水杨酸

基于在甲醛存在下 ,水杨酸与KMnO4在酸性介质中直接化学发光反应 ,建立了测定水杨酸的流动注射化学发光的方法 ,该法测定水杨酸的线性范围为5 .0× 1 0 -7～ 1 .0× 1 0 -3 mol L ,检出限为 3.0× 1 0 -7mol L ,相对标准偏差为 2 0 %(水杨酸 5 .0× 1 0 -5mol L ,n =1 1 )。该法已应用于脚癣药水中水杨酸的测定。     

乳酸氧化酶共价交联于蛋膜上制备乳酸传感器

以牛血清白蛋白 戊二醛为交联剂 ,将乳酸氧化酶固定于鸡蛋膜上 ,氧电极作电化学敏感元件 ,制成乳酸氧化酶电极。传感器的线性响应范围为 5 .0×1 0 - 5～ 2 .5× 1 0 - 2 mol/L ,检测限为 2 .0× 1 0 - 5mol/L ,RSD为 1 .4% (n =1 1 ) ,回收率为 97.5 %～ 1 0 4 .0 %。该传感器可用于临床乳酸的测定。     

涂碳型PVC膜培氟沙星选择电极的研制

报道一种以盐酸培氟沙星与溴汞酸盐生成的分子缔合物为电活性物质的新型涂碳PVC膜培氟沙星选择电极。在pH 1 .5～ 4.5范围内 ,电极对培氟沙星的Nernst响应范围为 1 .0× 1 0 - 2 ～ 5 .0× 1 0 - 5mol/L ,检测限为 4.2× 1 0 - 6mol/L。方法的平均回收率为 98.5 % ,RSD为 1 .0 %     

盐酸氯丙嗪在聚L-苏氨酸/多壁碳纳米管修饰电极上的电化学行为

以玻碳电极为基底成功制备了聚L-苏氨酸poly(L-Threonine)/多壁碳纳米管(MCNTs)修饰电极(p-L-Thr/ MCNTs/GCE).研究了盐酸氯丙嗪在该修饰电极上的电化学行为.该修饰电极对盐酸氯丙嗪具有明显的电催化氧化作用,并对此电极进行显微表征.本研究将此修饰电极用于流动注射不可逆双安培(FL-IB)体系的构建,即利用盐酸氯丙嗪在p-L-Thr/MCNTs/GCE上的氧化和高锰酸钾(KMnO4)在另一支铂电极上的还原构建了双安培检测体系,成功的建立了在外加电压为0 V条件下流动注射双安培法直接测定盐酸氯丙嗪的方法.在0 V外加电压下,在1 mol/L pH6.8的磷酸盐缓冲溶液的载液中,氧化峰峰电流与盐酸氯丙嗪浓度在2.0×10-6mol/L～4.0×10-5 mol/L范围内呈良好的线性关系,其线性回归方程为i (nA)=9.73×107C-50(r=0.9993,n=6),在4.0×10-5mol/L～10-3 mol/L范围内呈线性关系,其线性回归方程为i (nA)=2.33×107C+4×103 (r=0.9984,n=7),方法检出限为4.0×10-7 mol/L (S/N=3).连续测定1.00×10-4mol/L的盐酸氯丙嗪标准溶液20次,电流值RSD为2.44%,进样频率为90样/h.该方法具有较高的选择性和灵敏度.对盐酸氯丙嗪片中的盐酸氯丙嗪的含量的测定,结果比较满意.     

微分脉冲阴极溶出伏安法测定呋喃唑酮

研究了呋喃唑酮在玻碳电极上的伏安行为。在 1mol LHCl底液中 ,用微分脉冲阴极溶出伏安法得到一灵敏的呋喃唑酮还原峰 ,峰电位为 0 .0 38V(vs.Ag AgCl)。峰电流与呋喃唑酮浓度在 8× 1 0 -6～ 1× 1 0 -4 mol L范围内呈线性关系 (r=0 .9984) ,检出限为 8× 1 0 -8mol L。该法已用于片剂与合成血清样品中呋喃唑酮含量的测定     

聚磺胺嘧啶修饰电极伏安法测定对乙酰氨基酚

利用循环伏安法制备了聚磺胺嘧啶修饰电极, 研究了对乙酰氨基酚在该修饰电极上的电化学行为. 该电极对对乙酰氨基酚有较强的电催化作用. 在pH 9.0的PBS缓冲溶液中, 用循环伏安法和差分脉冲伏安法在该电极上测定了对乙酰氨基酚, 其线性范围分别为4.0×10-6～3.0×10-4 mol/L和2.0×10-7～1.0×10-5 mol/L, 检出限分别为9.0×10-7 mol/L和8.0×10-8 mol/L.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.