Determination of four trace preservatives in street food by ionic liquid-based dispersive liquid-liquid micro-extraction

A rapid and simple ionic liquid-based dispersive liquid-liquid micro-extraction (DLLME) method has been developed to pre-concentrate four paraben preservatives (methylparaben, ethylparaben, propylparaben, and butylparaben) from street food (pancakes). Several potentially influential factors such as the type of ionic liquid and disperser solvent, extraction time, sample pH, ionic strength, and the volume of the ionic liquid and disperser solvent were investigated. The optimum experimental conditions for the proposed micro-extraction process were: 0.1 mL of 1-octyl-3-methylimidazolium hexafluorophosphate ([C₈MIM][PF₆]) as an extraction solvent, 0.1 mL of acetonitrile as a disperser solvent, 5 min extraction time, and sample ionic strength of 30 % sodium chloride in water sample at pH 6.0. The LODs and LOQs were in the range of 1.0–1.5 ng g⁻¹ and 3.5–4.5 ng g⁻¹, respectively. Spiking recoveries were in the range of 60.1–79.5 % and the associated RSDs were all in the range of 1.8–7.0 %. The results show that DLLME is a suitable method for the determination of parabens in pancake samples and ionic liquid is a good extractant in this process.     

Quantitation of antioxidants in water samples using ionic liquid dispersive liquid-liquid microextraction followed by high-performance liquid chromatography-ultraviolet detection

A simple and efficient method, ionic liquid-based dispersive liquid-liquid microextraction combined with high-performance liquid chromatography-ultraviolet detection (HPLC-UV), has been applied for the extraction and determination of some antioxidants (Irganox 1010, Irganox 1076 and Irgafos 168) in water samples. The microextraction efficiency factors were investigated and optimized: 1-hexyl-3-methylimidazolium hexafluorophosphate [C(6)MIM][PF(6)] (0.06 g) as extracting solvent, methanol (0.5 mL) as disperser solvent without salt addition. Under the selected conditions, enrichment factors up to 48-fold, limits of detection (LODs) of 5.0-10.0 ng/mL and dynamic linear ranges of 25-1500 ng/mL were obtained. A reasonable repeatability (RSD≤11.8%, n=5) with satisfactory linearity (r(2)≥0.9954) of the results illustrated a good performance of the presented method. The accuracy of the method was tested by the relative recovery experiments on spiked samples, with results ranging from 85 to 118%. Finally, the method was successfully applied for determination of the analytes in several real water samples.     

Ionic liquid-based microwave-assisted dispersive liquid-liquid microextraction and derivatization of sulfonamides in river water, honey, milk, and animal plasma

The ionic liquid-based microwave-assisted dispersive liquid-liquid microextraction (IL-based MADLLME) and derivatization was applied for the pretreatment of six sulfonamides (SAs) prior to the determination by high-performance liquid chromatography (HPLC). By adding methanol (disperser), fluorescamine solution (derivatization reagent) and ionic liquid (extraction solvent) into sample, extraction, derivatization, and preconcentration were continuously performed. Several experimental parameters, such as the type and volume of extraction solvent, the type and volume of disperser, amount of derivatization reagent, microwave power, microwave irradiation time, pH of sample solution, and ionic strength were investigated and optimized. When the microwave power was 240 W, the analytes could be derivatized and extracted simultaneously within 90 s. The proposed method was applied to the analysis of river water, honey, milk, and pig plasma samples, and the recoveries of analytes obtained were in the range of 95.0-110.8, 95.4-106.3, 95.0-108.3, and 95.7-107.7, respectively. The relative standard deviations varied between 1.5% and 7.3% (n=5). The results showed that the proposed method was a rapid, convenient and feasible method for the determination of SAs in liquid samples.     

In-situ ionic liquid-based microwave-assisted dispersive liquid–liquid microextraction of triazine herbicides

We report on the determination of the triazine herbicides ametryne, prometryne, terbuthylazine and terbutryn in water samples. The herbicides are extracted by in-situ ionic liquid-based microwave-assisted dispersive liquid-liquid microextraction and then determined by high-performance liquid chromatography. This is a new method for extraction that has the advantages of requiring less volume of ionic liquid (IL) than other methods and at the same time is quite fast. The type and volume of IL, the type and volume of disperser, irradiation temperature, extraction time and salt concentration were optimized. Figures of merit include linear regression coefficients between 0.9992 and 0.9995, acceptable recoveries (88.4–114?%), relative standard deviations of 1.6–6.2?%, and limits of detection between 0.52 and 1.3?μg?L^?1.

Determination of insecticides in water using in situ halide exchange reaction-assisted ionic liquid dispersive liquid-liquid microextraction followed by high-performance liquid chromatography

A dispersive liquid-liquid microextraction (DLLME) method using in situ halide exchange reaction to form ionic liquid (IL) extraction phase was developed to determine four insecticides (i.e. methoxyfenozide, tetrachlorvinphos, thiamethoxam, and diafenthiuron) in water samples. The preconcentration procedure, followed by high-performance liquid chromatography and variable wavelength detectors (VWD), enabled the formation of the immiscible IL extraction phase; the insecticides were transferred into the IL phase simultaneously, which enhanced the efficiency and sufficiency, greatly shortening the operation time. The experimental parameters affecting the extraction efficiency including volume of extraction IL, extraction and centrifugation times, volume of the sample solution and exchanging reagent, and addition of organic solvent and salt were investigated and optimized. Under optimized conditions, the extractions yielded recoveries of the target analytes from 82 to 102%. The calibration curves were linear, and the correlation coefficient ranged from 0.9990 to 0.9999 under the concentration levels of 5-200 μg/L. The relative standard deviation (n=6) was 2.9-4.6%. The limits of detection (LODs) for the four insecticides were between 0.98 and 2.54 μg/L.     

Combination of ionic liquid-based dispersive liquid-liquid micro-extraction with stopped-flow spectrofluorometry for the pre-concentration and determination of aluminum in natural waters, fruit juice and food samples

In this research, we combined ionic liquid-based dispersive liquid-liquid micro-extraction (IL-based DLLME) with stopped-flow spectrofluorometry (SFS) to evaluate the concentration of aluminum in different real samples at trace level. 1-Hexylpyridinium hexafluorophosphate [Hpy][PF₆] ionic liquid and 8-hydroxyquinoline (oxine), which forms a highly fluorescent complex with Al³⁺, were chosen as the extraction solvent and chelating agent, respectively. The hydrophobic Al-oxine complex was extracted into the [Hpy][PF₆] and separated from the aqueous phase. Then, the concentration of the enriched aluminum in the sediment phase was determined by SFS. Some effective parameters that influence the SFS signals and the micro-extraction efficiency, such as the suction and sending time, the concentration of the chelating agent, pH, the amount of the ionic liquid, the type of disperser solvent and diluting agent, ionic strength, extraction time, equilibration temperature and centrifugation time were investigated and optimized. In the optimum experimental conditions, the limit of detection (3 s) and enrichment factor were 0.05 μg L⁻¹ and 100, respectively. The relative standard deviation (RSD) for six replicate determinations of 6 μg L⁻¹ Al was 1.7%. The calibration graph using the pre-concentration system was linear in the range of 0.06-15 μg L⁻¹ with a correlation coefficient of 0.9989. The developed method was validated by the analysis of certified reference materials and applied successfully to the determination of aluminum in several water, fruit juice and food samples.     

超声辅助离子液体分散液液微萃取/高效液相色谱法测定新型抗艾药ACC007

该文提出了一种基于超声辅助离子液体分散液液微萃取/高效液相色谱(HPLC)测定血清及药片中ACC007含量的新方法。在超声辅助下,无需分散剂即可将疏水性离子液体1-辛基-3-甲基咪唑六氟磷酸盐([C8mimPF6])形成的细小液滴分散于样品溶液中,从而有效萃取ACC007,萃取率在94.0%以上。实验对萃取剂种类、萃取剂用量、溶液pH值、萃取时间、冷却和离心时间等萃取条件进行了考察。在优化条件下,ACC007的线性范围为0.20~10.0μg/mL,检出限分别为0.062μg/mL(药片)和0.068μg/mL(血清)。采用该方法对药片和血清中ACC007进行测定,加标回收率为90.5%~103%,相对标准偏差为2.9%~5.1%,结果令人满意。     

基于分子络合的分散液液微萃取与高效液相色谱联用检测环境水样中2种苯氧羧酸类除草剂

建立了基于分子络合的分散液液微萃取（DLLME）方法,以磷酸三丁酯为萃取剂,以甲醇为分散剂,与高效液相色谱联用检测了环境水样中麦草畏和2,4-二氯苯氧乙酸（2,4-D酸）2种苯氧羧酸类除草剂,对影响前处理效果的因素（包括水样的pH值、萃取剂的种类和体积、分散剂的种类和体积、反萃液的pH值、反萃液的体积和盐浓度等）进行了详细考察,在最佳萃取条件下（水样体积10 mL,水样的pH值为0~1.0、100 μL磷酸三丁酯萃取剂、1000 μL甲醇分散剂、0.01 mol/L的氢氧化钾反萃液的体积为80 μL）,2种苯氧羧酸类除草剂在0.50~1000 μg/L范围内具有良好的线性,相关系数不小于0.9985,麦草畏和2,4-D酸的检出限分别为0.44 μg/L和0.49 μg/L,富集倍数分别为85和90,在实际样品中的加标回收率为75.7%~104.0%。该方法基于分子络合反应机理,将新型萃取剂磷酸三丁酯应用于分散液液微萃取,与HPLC联用实现了麦草畏和2,4-D酸的富集与检测,为环境水样中苯氧羧酸类除草剂的检测提供了新的前处理方法。     

漂浮液滴固化分散液液微萃取与高效液相色谱联用检测环境水样中的3种烷基苯酚

建立了漂浮液滴固化分散液液微萃取(DLLME-SFO)方法,以脂肪酸作为萃取剂,以甲醇作为分散剂,与高效液相色谱联用检测了环境水样中3种烷基苯酚。对影响前处理方法的因素进行了详细考察,在最佳萃取条件(60μL萃取剂辛酸、600μL分散剂甲醇、pH值为2.0~8.0、10 mL水样中加入0.5 g NaCl)下,3种烷基苯酚在20~1 500μg/L范围内具有良好的线性关系,相关系数不小于0.998 5,3种目标化合物的检出限为0.45~0.61μg/L,富集倍数为145~169,实际样品中3个水平的加标回收率为80.1%~109.9%。该方法将脂肪酸作为萃取剂,与HPLC联用实现了烷基苯酚的富集与检测,为环境水样中烷基苯酚的检测提供了对环境友好的前处理新方法。     

Investigation of feasibility of bamboo charcoal as solid-phase extraction adsorbent for the enrichment and determination of four phthalate esters in environmental water samples

This paper demonstrates, for the first time, that adsorptive potential of bamboo charcoal for solid-phase extraction of phthalate esters was investigated. The four phthalate esters, dimethyl phthalate (DMP), diethyl phthalate (DEP), butyl benzyl phthalate (BBP) and di-n-butyl phthalate (DBP), are quantitatively adsorbed on a bamboo charcoal packed cartridge, then the analytes retained on the cartridge are quantitatively desorbed with optimum amounts of acetone. Finally, the analytes in the eluant acetone are determined by high-performance liquid chromatography-ultraviolet detectior. Important parameters influencing the extraction efficiency, such as eluant and its volume, flow rate of sample, sample volume, pH, the amount of adsorbent and ionic strength were investigated and optimized in detail. Under the optimum conditions, the limits of detection were 0.35-0.43 microg/L for four phthalate esters. The proposed method has been applied to the analysis of rainwater and tap water samples. And satisfactory spiked recoveries were obtained in the range of 75.0-114.2%. All the results indicated that the bamboo charcoal has great potential as a novel adsorbent material for the enrichment and determination of phthalate esters in real environmental water samples.     

Development a robust ionic liquid-based dispersive liquid-liquid microextraction against high concentration of salt combined with flame atomic absorption spectrometry using microsample introduction system for preconcentration and determination of cobalt in water and saline samples

A robust ionic liquid-based method for dispersive liquid-liquid microextraction was developed for the determination of cobalt in saline samples. Its robustness was increased by introducing a common ion of the IL into the sample solution. The concentration of cobalt in the settled phase of the ionic liquid was determined by the FAAS using a homemade microsample injection valve. Under the optimized conditions, the calibration graph was linear in the concentration range from 0.4 to 120 ??g L^?1 with the detection limit of 0.1 ??g L^?1. Accuracy was checked against the ISO standard method. The method was successfully applied to the determination of cobalt in water and saline samples.     

超声辅助分散液液微萃取-高效液相色谱测定水样中的4种邻苯二甲酸酯类增塑剂

建立了采用超声辅助分散液液微萃取技术结合高效液相色谱法(UA-DLLME-HPLC)对4种邻苯二甲酸酯(PAEs)进行富集、检测的方法,并成功应用于实际水样分析。实验中采用富集因子来评价萃取效率,考察并优化了影响萃取效率的主要因素,包括萃取剂类型和用量、分散剂类型和用量、超声时间、离子强度、萃取时间和pH值等。结果表明: 在最佳萃取条件下,该法对4种PAEs（邻苯二甲酸二甲酯、邻苯二甲酸二乙酯、邻苯二甲酸二丁酯和邻苯二甲酸二正辛酯）具有较高的富集能力,富集因子分别为71、144、169和159;检出限分别为3.78、1.77、3.07和3.30 μg/L。对实验室自来水、某品牌矿泉水以及湖水分别加标50、200及500 μg/L的回收率为82.99%～114.47%,相对标准偏差为1.93%～8.31%。该法简便、快速、环保,可以用于测定实际水样中的PAEs类增塑剂。     

Ultrasound-assisted Low Density Solvent Based Dispersive Liquid-liquid Microextraction for Determination of Phthalate Esters in Bottled Water Samples

A technique of ultrasound-assisted low density solvent based dispersive liquid-liquid microextraction was developed for the determination of four phthalate esters, including dimethyl phthalate(DMP), diethyl phthalate(DEP), di-n-butyl phthalate(DnBP) and di(2-ethylhexyl) phthalate(DEHP) in bottled water samples. A low density solvent, toluene, was selected as extraction solvent. In the extraction process, a mixture of 15 μL of toluene(extraction solvent) and 100 μL of methanol(disperser solvent) was rapidly injected into 1.0 mL of water samples. A cloudy solution was formed after ultrasounded for 5 min, and then centrifuged at 5000 r/min for 5 min. The enriched analytes in the floating phase were determined by means of gas chromatograph. Under the optimum conditions, the enrichment factors were found to be in a range of 29-67, and the recoveries were ranged from 81.2% to 103.9%. The limits of the detection were in a range of 3.8-5.6 μg/L. The proposed method was applied to the extraction and determination of phthalate esters in bottled water samples, and the concentrations of phthalate esters found in the water samples were below the allowable levels.     

分散液-液微萃取与气相色谱-质谱联用分析环境水样中痕量的2,4-二硝基甲苯和磷酸三(2-氯乙基)酯

建立了分散液-液微萃取与气相色谱-质谱联用同时测定环境水样中痕量2,4-二硝基甲苯和磷酸三(2-氯乙基)酯的新方法。对影响萃取效率的因素进行了详细的考察和优化,确定采用的最佳萃取条件为: 将0.8 mL乙醇和60 μL氯仿的混合溶液快速注入5.0 mL的样品溶液中,振动混匀120 s后,离心分离,吸取沉积在试管底部的氯仿相直接进样分析。该方法对磷酸三(2-氯乙基)酯和2,4-二硝基甲苯的检出限(信噪比为3)分别为0.01和0.04 μg/L,富集倍数分别为96.6和127.5;两种物质的线性范围达3到4个数量级;日内和日间测定的相对标准偏差(RSDs, n=6)分别为8.6%～11.5%和8.9%～12.0%。将该方法用于环境水样中2,4-二硝基甲苯和磷酸三(2-氯乙基)酯的分析,其加标回收率为102.1%～110.9%。方法具有操作简单、方便快速、灵敏度高、无交叉污染和环境友好等优点。     

Combined Application of Ionic Liquid and Hybrid Poly (Ionic Liquid)-Bonded Silica: An Alternative Method for Extraction,Separation and Determination of Flavonoids from Plants

Hybrid poly (ionic liquid)-bonded silica was combined with an ionic liquid solution for the extraction, separation, and determination of flavonoids from natural plants by using a multi-phase dispersive extraction (MPDE) method. The hybrid material was synthesized using a facile method. A suitable sorbent was identified based on the adsorption behaviors of flavonoids on different poly (ionic liquid)-bonded silicas. In contrast to traditional matrix solid-phase dispersion (MSPD) method, the target analytes were first extracted by three-phase (sample-solvent-sorbent) dispersive extraction with ionic liquid (1-oxyl-3-methylimidazolium bromide) solutions as the solvent, and then cleaned up after removal from the sample matrix, called MPDE. This process combines the advantages of ionic liquids, ionic liquid-based sorbent, and MPDE. The recovery rates were achieved by MPDE of the flavonoids from Chamaecyparis obtusa: 76.4% for myricetin and 90.3% for amentoflavone. The proposed method may be used to extract and separate other flavonoids or even polyphenolic compounds from complex samples.     

Development of dispersive liquid-liquid microextraction combined with gas chromatography-mass spectrometry as a simple, rapid and highly sensitive method for the determination of phthalate esters in water samples

A simple, rapid and efficient method, the dispersive liquid-liquid microextraction (DLLME) in conjunction with gas chromatography-mass spectrometry (GC-MS), has been developed for the extraction and determination of phthalate esters (dimethyl phthalate, diallyl phthalate, di-n-butyl phthalate, benzyl butyl phthalate, dicyclohexyl phthalate and di-2-ethylhexyl phthalate) in water samples. Factors relevant to the microextraction efficiency, such as the kind of extraction, the disperser solvent and their volume, the salt effect and the extraction time were investigated and optimized. Under the optimized extraction conditions (extraction solvent: chlorobenzene, volume, 9.5microL; disperser solvent: acetone, volume, 0.50mL, without salt addition and extraction time below 5s), the figures of merit of the proposed method were evaluated. The values of the detection limit of the method were in the range of 0.002-0.008microgL(-1), while the RSD% value for the analysis of 1microgL(-1) of the analytes was below 6.8% (n=4). A good linearity (0.9962>/=r(2)>/=0.9901) and a broad linear range (0.02-100microgL(-1)) were obtained. The method exhibited enrichment factors and recoveries, ranging from 681 to 889 and 68.1 to 88.9%, respectively, at room temperature (25+/-1 degrees C). Finally, the proposed method was successfully utilized for the preconcentration and determination of the phthalate esters in different real water samples and satisfactory results were obtained.     

Trace determination of hexabromocyclododecane diastereomers in water samples with temperature controlled ionic liquid dispersive liquid phase microextraction

A novel temperature controlled ionic liquid dispersive liquid phase microextraction(TCIL-DLPME) coupled with rapid resolution liquid chromatography-electrospray tandem mass spectrometry(RRLC-ESI-MS-MS) has been developed for the enrichment and determination of three hexabromocyclododecane diastereomers(HBCDs) in water samples.Green solvent ionic liquid(IL) was used as extraction solvent instead of toxic organic solvents.This technique also avoided the usage of dispersive solvent.Some important parameters that might affect the extraction efficiency were optimized.Under the optimum conditions,good linear relationship,sensitivity and reproducibility were obtained.All the limits of detection for the three diastereomers were 0.1 ng/ mL.The linear range was obtained in the range of 1-100 ng/mL for the total amount of three HBCD diastereomers.It was satisfactory to analyze real environmental water samples with the recoveries ranging from 77.2%to 99.3%.The main advantage of the method is toxic organic solvent-free.     

Determination of medroxyprogesterone in water samples using dispersive liquid-liquid microextraction with low solvent consumption

A simple, rapid and efficient extraction procedure, dispersive liquid-liquid microextraction with low solvent consumption, has been developed in combination with high-performance liquid chromatography-ultraviolet detection for the extraction and determination of medroxyprogesterone from aqueous samples. For this technique, 120 μL of the mixture of extraction solvent and dispersive solvent at a ratio of 3:7 was injected into the aqueous sample with a syringe. Then a cloudy solution forms while manually shaking the conical centrifuge tube. After centrifuging, the extractant settled at the bottom of the conical centrifuge tube and part of it was introduced into the HPLC system. Some key parameters, including the type and volume of extraction solvent and dispersive solvent, extraction time and salt effect were investigated. Under optimum conditions, good linear behavior (R?>?0.9982) over the investigated concentration ranges were obtained. The method was successfully applied to tap water, farm water and river water samples.     

Application of dispersive liquid-liquid microextraction and high-performance liquid chromatography for the determination of three phthalate esters in water samples

A novel method, dispersive liquid-liquid microextraction (DLLME) coupled with high-performance liquid chromatography-variable wavelength detector (HPLC-VWD), has been developed for the determination of three phthalate esters (dimethyl phthalate (DMP), diethyl phthalate (DEP), and di-n-butyl phthalate (DnBP)) in water samples. A mixture of extraction solvent (41 μL carbon tetrachloride) and dispersive solvent (0.75 mL acetonitrile) were rapidly injected into 5.0 mL aqueous sample for the formation of cloudy solution, the analytes in the sample were extracted into the fine droplets of CCl₄. After extraction, phase separation was performed by centrifugation and the enriched analytes in the sedimented phase were determined by HPLC-VWD. Some important parameters, such as the kind and volume of extraction solvent and dispersive solvent, extraction time and salt effect were investigated and optimized. Under the optimum extraction condition, the method yields a linear calibration curve in the concentration range from 5 to 5000 ng mL⁻¹ for target analytes. The enrichment factors for DMP, DEP and DnBP were 45, 92 and 196, respectively, and the limits of detection were 1.8, 0.88 and 0.64 ng mL⁻¹, respectively. The relative standard deviations (R.S.D.) for the extraction of 10 ng mL⁻¹ of phthalate esters were in the range of 4.3-5.9% (n = 7). Lake water, tap water and bottled mineral water samples were successfully analyzed using the proposed method.     

Ultrasound assisted ionic liquid dispersive liquid phase extraction of lovastatin and simvastatin: A new pretreatment procedure

A fast and novel sample preparation procedure: ultrasound assisted ionic liquid (IL) dispersive liquid extraction for the concentration of lovastatin and simvastatin in aqueous samples was developed. An IL ([C₆MIM][PF₆]) was used as the extraction solvent, and the factors affecting the extraction efficiency such as initial temperature, the volume of IL, pH of water samples, cooling time, and salt concentration were optimized. In combination with HPLC‐UV, both lovastatin and simvastatin exhibited a good linear range of 1–100 ng/mL. The limits of detection (LODs) of lovastatin and simvastatin were 0.17 and 0.29 ng/mL, respectively. Precisions of the proposed method (RSDs, n = 9) were 4.12 and 4.52%, respectively. This method has been successfully applied for the analysis of target compounds in three real water samples and good spiking recoveries were obtained in the range of 90.0–102.2% for lovastatin and 80.5–112.0% for simvastatin. These results indicated that ultrasound assisted IL dispersive liquid phase extraction would have good application prospect in the pretreatment of environmental samples.