纳米尺度超声显影微囊的制备及性能表征简

采用双乳液-溶剂挥发法制备了内部包封氟碳液体的聚乳酸-甲氧基聚乙二醇两嵌段共聚物(MePEG-b-PLA)基超声显影纳米微囊;用2种不同嵌段比的MePEG-b-PLA共聚物研究共聚物组成与纳米囊性能的关系;选用聚乙烯醇(PVA)、羧甲基葡聚糖(CMG)和壳聚糖(CS) 3种乳化剂对纳米囊表面进行亲水性修饰. 对所制备纳米囊的粒径、Zeta电位、形貌和水溶液稳定性进行了表征. 结果表明,利用质量分数为1%的PVA和质量分数为1%的CMG组成的复配乳化剂和m(MePEG)：m(PLA)= 1：3的聚合物制得的纳米囊的平均粒径为432.9 nm,水溶液稳定性优良. 利用超声仪对纳米囊体外超声显影性能进行研究,结果表明,所得聚乳酸-甲氧基聚乙二醇纳米囊具有更好的中心成像区域灰度值和更持久的体外超声显影效果. 结合3-(4,5-二甲基噻唑-2)-2,5-二苯基四氮唑溴盐(MTT)比色法研究证实该纳米囊具有低细胞毒性. 在超声影像学领域具有良好的应用前景.     

聚乙二醇-聚乳酸共聚物胶束溶液的冷冻干燥及胶束体外释药动力学研究

合成了一系列亲水、疏水链段质量比例不同的聚乙二醇-聚乳酸(PEG-PLA)嵌段共聚物胶束, 并以两性霉素B为模型药物制备了载药胶束. 为获得稳定性良好的、可长期储存的载药胶束剂型, 对胶束进行了冷冻干燥. 使用不同浓度的糖类(包括甘露糖、海藻糖、葡萄糖)、泊洛沙姆188 (Pluronic F68)、聚乙二醇作为冻干保护剂, 以冻干产品的重分散性、冻干前后胶束的粒径及多分散性为指标评价各种保护剂的保护效果. 结果发现, 当嵌段聚合物中聚乳酸链段的质量百分比小于或等于聚乙二醇时, 糖类、Pluronic F68和PEG均可以起到有效的冻干保护作用; 而对于聚乳酸链段质量比例较大的共聚物胶束, 只有PEG和Pluronic F68能够起到较好的冻干保护作用. 对载药胶束体外释放研究表明, 聚合物胶束的体外释放缓慢, 符合一级动力学特征.     

聚乙二醇-聚乳酸共聚物药物载体*

本文综述了聚乙二醇与聚乳酸共聚亲水改性的最新进展, 包括嵌段和星型结构聚乙二醇-聚乳酸共聚物(PEG-PLA)及其端基化衍生物的合成。同时概述了该共聚物以胶束、微粒、水凝胶和囊泡形式担载亲水、疏水及蛋白质类药物的应用,特别介绍了静电纺丝制备的PEG-PLA超细纤维载体及其释药特性。     

金纳米粒子杂化超分子水凝胶的制备与性能

在制备水溶性硫辛酸酯封端的甲氧基聚乙二醇-聚己内酯嵌段共聚物(MPEG-PCL-ALA)单层包覆金纳米粒子的基础上, 在水溶液中, 利用α-环糊精(α-CD)与单层包覆金纳米粒子的包合作用构建杂化超分子水凝胶. 透射电子显微(TEM)照片显示, 金纳米粒子的尺寸为6～8 nm. X射线衍射测试表明, 所制备的水凝胶中含有α-环糊精与MPEG-PCL嵌段共聚物包合形成的多聚准轮烷的特征衍射峰(2θ＝19.7°). 紫外-可见吸收光谱显示, 单层包覆金纳米粒子的水溶液及其与α-CD包合形成的水凝胶在525 nm处均出现表面等离子共振吸收峰, 单层包覆金纳米粒子溶液存放3个月后, 其表面等离子共振吸收峰未发生明显红移, 表明单层包覆金纳米粒子的水溶液具有较好的稳定性.     

聚L-丙氨酸-聚乙二醇嵌段共聚物的胶束化行为研究

以氨基聚乙二醇单甲醚(MPEG-NH₂)为大分子引发剂, 采用开环聚合方法合成了聚L-丙氨酸-聚乙二醇嵌段共聚物(PAME), 并对其结构进行了表征; 用圆二色谱(CD)研究了嵌段共聚物在水溶液中的二级结构, 用芘荧光探针技术研究了共聚物胶束的形成及其临界胶束浓度(CMC), 利用动态光散射(DLS)和透射电镜(TEM)研究了胶束的粒径分布和形态. 结果表明, 在水溶液中共聚物链以α-螺旋构象形式存在, 在一定条件下嵌段共聚物能够形成球形的稳定胶束, PAME-1形成胶束的CMC为1.99×10^-5 mol/L, CMC值受共聚物中聚L-丙氨酸(PLA)链段含量的影响.     

聚乙二醇甲醚-聚(D,L-乳酸)嵌段共聚物纳米胶束的制备

聚乙二醇甲醚-聚(D;L-乳酸)嵌段共聚物纳米胶束的制备;聚乙二醇单甲醚;两亲性二嵌段共聚物;纳米沉淀技术     

聚乳酸-b-聚(N~ε-苄氧羰基-L-赖氨酸)-b-聚乙二醇的合成与表征

用端氨基聚乳酸做引发剂,在DMF中引发Nε-苄氧羰基-L-赖氨酸酐(Lys(Z)-NCA)聚合,合成了端氨基聚(Nε-苄氧羰基-L-赖氨酸)-b-聚乳酸两嵌段共聚物.以端羧基聚乙二醇经NHS活化与端氨基聚(Nε-苄氧羰基-L-赖氨酸)-b-聚乳酸偶联,合成了聚(乳酸-b-Nε-苄氧羰基-L-赖氨酸-b-乙二醇)三嵌段聚合物.利用IR、1H-NMR、GPC和TEM对它们的结构、形态进行了表征,结果表明,所合成的分子量可控、分子量分布窄(Mw/Mn=1.07)的嵌段共聚物,酰化反应产率达70%以上.同时聚乙二醇和Nε-苄氧羰基-L-赖氨酸被引入到聚乳酸主链中,在聚合物侧链脱保护后有望改善聚乳酸的细胞亲和性。     

多功能NiFeAu纳米粒子的合成与表征

采用一罐纳米乳液法,以聚乙二醇-聚丙二醇-聚乙二醇(PEO-PPO-PEO)三嵌段共聚物为表面活性剂,通过还原前驱体乙酰丙酮镍、乙酰丙酮铁(Ⅱ)和醋酸金,成功制备了NiFeAu纳米粒子.采用透射电镜和X射线衍射仪分析了NiFeAu纳米粒子的形貌和结构;采用傅立叶变换红外光谱仪分析了三嵌段共聚物在NiFeAu纳米颗粒表面的覆盖情况;采用紫外-可见吸收光谱仪和振动样品磁强计测试了纳米粒子的光学和磁学特性.结果表明,三嵌段共聚物成功地结合于NiFeAu纳米颗粒表面;所制备的纳米粒子粒径分布较窄、结晶性能良好,并兼具光学和磁学特性.     

基于“分子胶”的新型两亲性嵌段共聚物β-CD-PLA的合成及其胶束化

以二重氢键为引导,二硫键连接疏水性聚乳酸(PLA)和亲水性β-环糊精(β-CD)合成了嵌段共聚物β-CD-PLA。采用1 H-NMR和GPC对嵌段共聚物β-CD-PLA的结构进行了表征,以芘作为荧光分子探针对嵌段共聚物β-CD-PLA自组装胶束的性质进行了表征,采用动态光散射纳米粒度仪(DLS)对自组装胶束的粒径进行了测试。结果表明:在二重氢键的引导作用力和碘的氧化作用下,中间体脱去保护基形成双二硫键,形成目标嵌段共聚物β-CD-PLA,该嵌段共聚物能够在水中自组装形成纳米胶束,临界胶束浓度(CMC)为0.089mg/mL,在稀溶液中具有良好的稳定性,自组装形成空白胶束的粒径为31nm,阿霉素盐酸盐(DOX)载药胶束的粒径为42nm。     

巯-炔加成可控修饰的两亲性嵌段共聚肽及其溶液自组装

以单甲氧基聚乙二醇伯胺(m PEG-NH2)作为大分子引发剂,引发γ-炔丙基-L-谷氨酸-N-羧基-环内酸酐(NCA)开环聚合的方法,合成了侧链上含有炔基的聚乙二醇-b-聚(γ-炔丙基-L-谷氨酸)两嵌段共聚物(PEG-b-PPLG).进一步通过巯基-炔基加成的"点击"化学方法,对两嵌段共聚物中聚氨基酸PPLG嵌段分别修饰了普通疏水性的饱和烷烃、具有超疏水性质的全氟代烷烃,并利用红外光谱、圆二色光谱、动态光散射和透射电子显微镜等技术,对合成的两嵌段共聚物在水溶液及有机溶剂四氢呋喃(THF)中的自组装性质进行了研究.研究发现两嵌段共聚物修饰前后,聚氨基酸嵌段在水和THF中都能保持一定的α-螺旋的构象,并进一步自组装形成以α-螺旋的聚氨基酸嵌段为内核、PEG嵌段为外壳的纳米聚集结构.     

Ru-Zn催化剂在苯选择加氢制环己烯反应中的粒径效应

采用共沉淀法制备了水溶性聚合物修饰的苯选择加氢制环己烯Ru-Zn催化剂, 并用X射线衍射、 透射电镜、 X射线能量色散谱、 X射线光电子能谱和氮气物理吸附等对加氢后催化剂进行了表征. 结果表明, 水溶性聚合物的种类和聚乙二醇-20000(PEG-20000)的用量对Ru-Zn催化剂微晶尺寸有显著影响. 在ZnSO₄存在下, 随着Ru-Zn催化剂Ru微晶尺寸增加, 苯转化率降低, 环己烯最高收率则呈火山型变化趋势. 用0.4 g PEG-20000修饰的Ru-Zn催化剂[m(PEG-20000)∶m(Ru)=0.2]Ru的微晶尺寸为4.8 nm, 环己烯最高收率为62.2%. Ru微晶尺寸影响催化剂表面的Zn/Ru原子比, 进而影响Ru-Zn催化剂性能.     

聚乙烯吡咯烷酮基碘凝胶电解质的制备及在染料敏化太阳能电池中的应用

采用聚乙烯吡咯烷酮(PVP)和聚偏氟乙烯(PVDF)为凝胶剂, 以碘化锂和碘单质为碘源, 碳酸乙烯酯(EC)和碳酸丙烯酯(PC)为溶剂, 制备了染料敏化太阳能电池(DSSCs)用凝胶聚合物电解质(GPE). 使用拉曼光谱、 循环伏安曲线和交流阻抗谱等对GPE进行表征. 结果表明, 聚合物的配比与浓度及碘与碘化锂比例对该电解质性能有很大影响, 当聚合物质量分数为10%、 PVP与PVDF质量比为80∶20、 I₂浓度为0.042 mol/L且LiI与I₂摩尔比为30∶1时, 制备的GPE在室温下电导率达最大值(3.27 mS/cm). 使用该GPE组装的DSSCs在100 mW/cm²的模拟太阳光照射下, 开路电压为0.64 V, 短路电流为13.6 mA/cm², 填充因子为0.595, 能量转化效率为5.18%, 并在30 d内表现出了良好的稳定工作性能.     

Synthesis and properties of halogen- or methyl-containing poly(diphenylacetylene) membranes

Novel diphenylacetylenes with both trimethylsilyl groups and other substituents (R₂C₆H₃CCC₆H₄-p-SiMe₃, R = m,p-Cl,Cl, m,m-Cl,Cl, m,p-Br,Br, m,m-Br,Br, m,p-Me,Me, m,m-Me,Me, 1a–f, respectively) were polymerized with TaCl₅–n-Bu₄Sn to produce solvent-soluble polymers (2a–f). Most polymers (2a–e) had high molecular weight over 1 × 10⁶, and gave free-standing membranes by the solution casting method. Desilylation of these Si-containing polymer membranes was carried out with trifluoroacetic acid (TFA), which afforded solvent-insoluble desilylated polymer membranes (3a–e). According to thermogravimetric analysis (TGA), both Si-containing and desilylated polymers showed high thermal stability (T₀ ≥ 420 °C). The fractional free volume (FFV) of both Si-containing and desilylated polymer membranes (2a–d, 3a–d) were fairly large (ca. 0.27–0.32), while the FFVs of membranes (2e, 3e) were rather small (0.28 and 0.24). The oxygen permeability coefficients (P_O2) of 2a was as high as 5400 barrers, which is the largest among all the poly(diphenylacetylene) derivatives. Polymers 2b–d also exhibited high oxygen permeability, and their desilylated ones 3b–d retained similar high oxygen permeability. On the other hand, the P_O2 values of 2e and 3e were 1200 and 530 barrers, respectively, which are smaller than those of the halogen-containing polymers (2a–d and 3a–d).     

"Two-in-one" fabrication of Fe3O4/MePEG-PLA composite nanocapsules as a potential ultrasonic/MRI dual contrast agent

A new method for the fabrication of Fe(3)O(4) nanoparticles enveloped by polymeric nanocapsules is proposed. This method is characterized by combining a double emulsification with the interfacial coprecipitation of iron salts to form Fe(3)O(4)/polymer composite nanocapsules in a single step. To demonstrate the viability of this approach, methoxy poly(ethylene glycol)-poly(lactide) (MePLEG) was chosen as the shell material for Fe(3)O(4)/MePLEG nanocapsules. In addition to the versatility offered for fabricating nanocapsules with different shell materials, the method was found to be convenient for adjusting the magnetite content of the nanocapsules from 0 to 43%. In addition to their confirmed T(2)-weighted magnetic resonance imaging (MRI) enhancement, the resultant composite nanocapsules display much more obvious acoustic responses than MePLEG nanocapsules in an acoustic investigation. Furthermore, the low toxicity of these composite nanocapsules, as confirmed by our study, combined with their magnetic and acoustic properties ensure that these composite nanocapsules have great potential in acting as ultrasonic/MRI dual contrast agents.     

有序介孔Ru-MgZr复合氧化物合成及催化亚油酸异构化性能

筛选高效、高选择性多相催化剂异构化亚油酸是共轭亚油酸(CLA)研究的重点。 本文采用溶剂挥发自组装改进的溶胶-凝胶法,合成有序介孔Ru掺杂的MgO-ZrO₂固体碱催化剂。 考察了催化剂中不同Mg物质的量对催化剂孔径、比表面积和表面碱性以及Ru等的结构和性能对催化性能的影响。 对比了催化剂的形貌、表面碱性及Ru组分对催化性能的影响程度。 结果表明,n(Zr)∶n(Mg)=3∶1时,Ru掺杂的MgO-ZrO₂固体碱催化剂具有高度有序的介孔结构和高的比表面积。 而n(Zr)∶n(Mg)=1∶1时, MgO-ZrO₂固体碱催化剂合成CLA产率较高,反应时间4 h,产率达到85%,催化效率为0.099 g(CLA)·L^-1(solvent)·min^-1,并且催化产物主要为具有生物活性的3种共轭亚油酸异构体。 催化剂的强碱性位点和晶格Ru是催化异构化反应的两个活性位点,强碱性位点是提高催化性能的关键。 固体碱复合氧化物催化效率高、制备方法简单、反应产物生物活性高等优点,具有较好的应用前景。     

Synthesis, characterization and the unpleasantly disordered crystal structure of Ir(Ome)(CO)(PPh3)2(SO4)

The adducts of O₂ and SO₂ with trans-MeOIr(CO)(PPh₃)₂ are formed in equilibria and have been characterized. Reaction of the SO₂ adduct, Ir(OMe)(SO₂)(CO)(PPh₃)₂ with dioxygen leads to the sulfato complex, Ir(Ome)(CO)(PPh₃)₂(SO₄), the structure of which has been determined. Ir(Ome)(CO)(PPh₃)₂(SO₄) crystallizes in the monoclinic system with a 11.958(2), b 14.163(3), c 12.231(2) Å, β 118.365(12)°, V 1822.7(6) ų and Z = 2. Diffraction data for 2θ = 4.5–45.0° (Mo-K) were collected with a Syntex P2₁ diffractometer and the structure was solved (assuming space group P2₁/m and an unpleasant 2-fold disordered model) and refined to R = 4.8% for all 2512 independent data (R = 3.5% for those 2042 data with ¦F_O¦ > 6σ(¦F¦)). The iridium(III) atom has a distorted octahedral coordination sphere with trans PPh₃ ligands and a cis-chelating bidentate O,O′-SO₄ group; the structure is completed by mutually cis OMe and CO ligands.     

Phase behavior and surface tensions of amphiphilic fluorinated random copolymer aqueous solutions

Phase behavior and surface tension of aqueous solutions of fluorinated random copolymers [perfluoroalkylacrylate]–[poly(ethyleneoxide)methacrylate], [C_mRf-acrylate]-[EO_n-methacrylate] with fluroalkyl carbon number m = 8, 6, 4, 2 and number of ethyleneoxide unit, n = 9 and 4.5 were investigated as a function of composition and different combinations of m and n. Isotropic solutions are formed at lower temperatures over wide concentration range of copolymer but at higher temperature phase separation occurs. The cloud point of copolymer decreases with decreasing n as well as m, and also with decreasing the number of poly(ethyleneoxide)methacrylate chain per perfluorinatedalkylacrylate chain, suggesting that the copolymers become more hydrophobic on decreasing m and n. Equilibrium and dynamic surface tension measurements show that copolymers become increasingly surface active as m as well as n decrease but the adsorption at the air–water interface is very slow due to bulkiness of the molecules. No clear evidence of the formation of micellar aggregates could be obtained from surface tension–composition curves.     

Determination of trimethylselenonium iodide, selenomethionine, selenious acid, and selenic acid using high-performance liquid chromatography with on-line detection by inductively coupled plasma mass spectrometry or flame atomic absorption spectrometry

An analytical method has been developed for the determination of selenious acid, selenic acid, trimethylselenonium ion, and selenomethionine. The four selenium compounds were separated by HPLC on a column (25 cm×4 mm I.D.) of the anion-exchanger ESA Anion III with a mobile phase (1.5 ml/min) of 0.0055 M ammonium citrate (pH 5.5). Detection was carried out using an on-line inductively coupled plasma mass spectrometer (ICP-MS) or a flame atomic absorption spectrometer (FAAS) as the selenium-specific detector. The chromatographic parameters and the chemical factors affecting the separation of the selenium species were optimized. The four selenium compounds could be separated within 8 minutes. The detection limits of the coupled HPLC–FAAS system were approximately 1 mg Se/l for each compound (100 μl injection), estimated as three times the base-line noise of the chromatograms. More powerful selenium detection was achieved with an ICP-MS. Selenium was measured at m/z 78. To increase the nebulization efficiency, the Meinhard concentric glass nebulizer was replaced by an ultrasonic nebulizer. The ICP-MS signal intensity was increased with the ultrasonic nebulization by a factor of 7 times for selenious acid and 24 to 31 times for trimethylselenonium ion, selenomethionine, and selenic acid compared to that with the Meinhard nebulization. The detection limits achieved by the HPLC–ICP-MS with the ultrasonic nebulization were 0.08 μg Se/l for trimethylselenonium ion, 0.34 μg Se/l for selenious acid, 0.18 μg Se/l for selenomethionine, and 0.07 μg Se/l for selenic acid, respectively.     

Structural characterisation of [Pt(NH3)4]2[W(CN)8][NO3]·2H2O donor–acceptor complex

The bimetallic [Pt(NH₃)₄]₂[W(CN)₈][NO₃]·2H₂O is characterised by single-crystal X-ray diffraction [S.G.P2₁/m(11), a=8.0418(7), b=19.122(2), c=9.0812(6) Å, Z=2]. All platinum centres have the square-plane D_4h geometry with average dimensions Pt(1)–N 2.042(2) and Pt(2)–N 2.037(10) Å. The octacyanotungstate anion has the square-antiprismatic D_4d configuration with average dimensions W(1)–C 2.164(13), C–N 1.140(12), W(1)–N 3.303(5) Å. The structure exhibits two different mutual orientations of Pt versus W units resulting in Pt(2)–W(1), W(1)^* separations of 4.77(2), 4.55(2)^* and Pt(1)–W(1) of 6.331(8) Å. A centrosymmetric structure reveals groups of two distinct columns: the first is formed by intercalated NO₃⁻ between parallel [Pt(1)(NH₃)₄]²⁺ planes and the second consists of [W(CN)₈]³⁻ interlayered by, parallel to square faces of W-antiprisms, [Pt(2)(NH₃)₄]²⁺. The structure is stabilised through a three-dimensional hydrogen bond network via nitrogen atoms of cyanide ligands, hydrogen atoms of NH₃ ligands, water molecules and oxygen atoms of NO₃⁻ counteranions. The vibrational pattern and the range of ν(CN) frequencies attributable to the electronic environment of W(V) and W(IV) are consistent with the ground state Pt(II)↔W(V) charge transfer.