纳米银催化氧化偶联硫醇制二硫化物

采用多元醇为溶剂和还原剂制备了聚乙烯吡咯烷酮(PVP)保护的纳米银,并将其用于催化正十二烷基硫醇氧化偶联反应.质谱、红外光谱、拉曼光谱和核磁共振氢谱表征结果表明所得产物为二硫化物.考察了反应时间、反应温度、催化剂和水的用量等对正十二烷基硫醇氧化偶联反应的影响,从而得出优化的反应条件:0.157mmolPVP保护的纳米银,20μl水,100℃下反应3h.此外,进一步将PVP保护的纳米银用于正丁硫醇和正辛硫醇的氧化偶联反应,也得到了相应的二硫化物.     

Stereoselectivity of (−)-(1<Emphasis Type="Italic">R</Emphasis>,2<Emphasis Type="Italic">S</Emphasis>)-2-methylamino-1-phenylpropan-1-ol preparation

Stereoselectivity of reductive amination of (R)-1-hydroxy-1-phenylpropan-2-one by methylamine was studied. From the four isomers possible, only two are produced by this reaction. These are marked as (−)-(1R,2S)-ephedrine (desired product) and (+)-(1S,2R)-ephedrine. The reaction stereoselectivity depends both on the type of the catalyst and reaction conditions. The most suitable type is the supported platinum. However, this catalyst rapidly deactivates. With a decreasing activity of Pt catalyst, the stereoselectivity decreases. It is also decreased during the production of the second liquid phase (water) in the reaction mixture.     

Highly Active Copper‐Network Catalyst for the Direct Aldol Reaction

The development of a highly active solid‐phase catechol–copper network catalyst for direct aldol reaction is described. The catalyst was prepared from an alkyl‐chain‐linked bis(catechol) and a copper(II) complex. The direct aldol reaction between carbonyl compounds (aldehydes and ketones) and methyl isocyanoacetate was carried out using 0.1–1 mol % [Cu] catalyst to give the corresponding oxazolines at yields of up to 99 % and a trans/cis ratio of >99:1. The catalyst was reused with no loss of catalytic activity. A plausible reaction pathway is also described.     

Reaction kinetics of carbon dioxide with glycidyl methacrylate using immobilized trioctylamine supported on poly(styrene-CO-vinylbenzyl chloride) as a catalyst

A soluble polymer-supprted catalyst containing pendant trioctylammonium chloride was synthesized by the radical copolymerization of p-chloromethylated styrene with styrene followed by the addition reaction of the resulting copolymer with trioctylamine. Absorption rate of carbon dioxide into glycidyl methacrylate (GMA) solutions containing the catalyst was measured using a semi-batch stirred tank with a plane gas-liquid interface at 101.3 kPa. The reaction kinetics of the reaction between carbon dioxide and GMA was evaluated using the absorption rate and the mass transfer mechanism of carbon dioxide. Solvents such as toluene, N-methyl-2-pyrrolidinone, and dimethyl sulfoxide influenced the reaction rate constants. Furthermore, this catalyst was compared to the monomeric tetraoctylammonium chloride under the same reaction conditions.     

Asymmetric Photocatalysis by Intramolecular Hydrogen‐Atom Transfer in Photoexcited Catalyst–Substrate Complex

3‐(2‐Formylphenyl)‐1‐pyrazol‐1‐yl‐propenones undergo an asymmetric photorearrangement to benzo[d]cyclopropa[b]pyranones with up to >99 % ee, which is catalyzed by a bis‐cyclometalated rhodium catalyst in the presence of visible light. Mechanistic experiments and DFT calculations support a mechanism in which a photoexcited catalyst/substrate complex triggers an intramolecular hydrogen‐atom transfer followed by a highly stereocontrolled hetero‐Diels–Alder reaction. In this reaction scheme, the rhodium catalyst fulfills multiple functions by 1) enabling visible‐light π→π* excitation of the catalyst‐bound enone substrate, 2) facilitating the hydrogen‐atom transfer, and 3) providing the asymmetric induction for the hetero‐Diels–Alder reaction.     

The kinetics reaction of 1-chloro-2,3-epoxypropane with n-butyl and iso-butyl alcohols

The reactions of 1-chloro-2,3-epoxypropane with n-butyl and isobutyl alcohols and their 3-chloro-2-hydroxypropyl ethers, respectively, in the presence of boron fluoride diethyl etherate catalyst are of the first order with regard to 1-chloro-2,3-epoxypropane as well as to the catalyst. In the catalyst concentration range of 1.4 to 47.3 mmol/l., the participation of the catalyst in the reaction is incomplete. The mechanism of the reactions resembles S_N2 in regard to changes of activation entropy and influence of dielectric constant of the reaction medium upon the reaction rate. The established values of K (the ratio of propagation to initiation rates) are suitable for calculating the compositions of the adducts obtained. The experimentally obtained yields of 3-chloro-2-hydroxypropyl ethers of lower alcohols are compared with those calculated from the kinetically determined values of K.     

HYDROFORMYLATION OF MMA CATALYZED BY SILICA-SUPPORTED POLY-γ-AMINO PROPYLSILOXANE-Rh-Co BIMETALLIC COMPLEX

A silica-supported poly-γ- aminopropylsiloxane-rhodium-cobalt bimetallic complex(abbreviated as SiO_2-NH_2-Rh-Co)has been prepared and used as catalyst for hydroformylationof methyl methacrylate. The results showed that the catalyst could catalyze the reaction in95.6% conversion with 92.8% selectivity for the normal aldehyde, methyl β-formylisobu-tyrate. Such catalyst also showed high stability during the reaction and could be used repeat-edly.     

Preparation and characterization of Al2O3-MgO mixed oxides

A new catalyst system V-Cs-Cu-Tl/TiO₂·SiC for vapor-phase selective oxidation reaction of p-tert-butyltoluene to p-tert-butylbenzaldehyde were studied. It was found that the addition of thallium promoted the reaction. After 365 hours stability test, the V-Cs-Cu-Tl/TiO₂·SiC catalyst still kept excellent result that conversion of p-tert-butyltoluene and the selectivity of p-tert-butylbenzaldehyde reach 10 mol% and 80 mol%. The catalyst was characterized by XRD, TEM, FT-IR and ICP measurements.     

Carbocations as Lewis Acid Catalysts in Diels–Alder and Michael Addition Reactions

In general, Lewis acid catalysts are metal‐based compounds that owe their reactivity to a low‐lying empty orbital. However, one potential Lewis acid that has received negligible attention as a catalyst is the carbocation. We have demonstrated the potential of the carbocation as a highly powerful Lewis acid catalyst for organic reactions. The stable and easily available triphenylmethyl (trityl) cation was found to be a highly efficient catalyst for the Diels–Alder reaction for a range of substrates. Catalyst loadings as low as 500 ppm, excellent yields, and good endo/exo selectivities were achieved. Furthermore, by changing the electronic properties of the substituents on the tritylium ion, the Lewis acidity of the catalyst could be tuned to control the outcome of the reaction. The ability of this carbocation as a Lewis acid catalyst was also further extended to the Michael reaction.     

Continuous Consecutive Reactions with Inter‐Reaction Solvent Exchange by Membrane Separation

Pharmaceutical production typically involves multiple reaction steps with separations between successive reactions. Two processes which complicate the transition from batch to continuous operation in multistep synthesis are solvent exchange (especially high‐boiling‐ to low‐boiling‐point solvent), and catalyst separation. Demonstrated here is membrane separation as an enabling platform for undertaking these processes during continuous operation. Two consecutive reactions are performed in different solvents, with catalyst separation and inter‐reaction solvent exchange achieved by continuous flow membrane units. A Heck coupling reaction is performed in N,N‐dimethylformamide (DMF) in a continuous membrane reactor which retains the catalyst. The Heck reaction product undergoes solvent exchange in a counter‐current membrane system where DMF is continuously replaced by ethanol. After exchange the product dissolved in ethanol passes through a column packed with an iron catalyst, and undergoes reduction (>99 % yield).     

Kinetics of catalyzed esterification of acetic acid with n-butanol using carbonized agro-waste

The objective of this research work was to investigate the kinetics of esterification of acetic acid with n-butanol through the variation of experimental parameters. The reaction mixture was catalyzed heterogeneously by a sulfonated catalyst in batch mode of operation. The catalyst was prepared from abundantly available agro-waste, Cajanus cajan husk by chemical activation process, which produces a carbon-based solid catalyst with high surface area. The catalyst was characterized by a Brunauer-Emmet-Teller surface analyzer and Fourier transform infrared spectroscopy to know the surface morphology. Process parameters such as contact time, reaction temperature, and catalyst loading, which can influence the extent of conversion of reactants, were studied. Furthermore, the kinetic investigation was also carried out to estimate the kinetic parameters for uncatalyzed and catalyzed reaction using the second-order pseudo-homogeneous (P-H), Eley-Rideal (E-R), and Langmuir-Hinshelwood (LH) kinetic models for this research work. The kinetic parameters such as activation energy, preexponential factor, and the thermodynamic parameters such as enthalpy and entropy were estimated for uncatalyzed and catalyzed reactions using these three models. The process conditions were optimized for catalyzed and uncatalyzed reactions to obtain the maximum product yield by minimizing root mean square error of each experimental data using the MS-excel solver tool. Thus, this study reveals the high potential of an agro-waste, Cajanus cajan husk as raw material for the synthesis of catalyst. The results show that the E-R model is more appropriate for predicting the dynamic data of an esterification reaction, as the forward rate of reaction estimated using the E-R model are more modified than P-H and L-H models.     

Brønsted Acid Catalysis—Controlling the Competition between Monomeric versus Dimeric Reaction Pathways Enhances Stereoselectivities

Chiral phosphoric acids (CPA) have become a privileged catalyst type in organocatalysis, but the selection of the optimum catalyst is still challenging. So far hidden competing reaction pathways may limit the maximum stereoselectivities and the potential of prediction models. In CPA-catalyzed transfer hydrogenation of imines, we identified for many systems two reaction pathways with inverse stereoselectivity, featuring as active catalyst either one CPA or a hydrogen bond bridged dimer. NMR measurements and DFT calculations revealed the dimeric intermediate and a stronger substrate activation via cooperativity. Both pathways are separable: Low temperatures and high catalysts loadings favor the dimeric pathway (ee up to −98 %), while low temperatures with reduced catalyst loading favor the monomeric pathway and give significantly enhanced ee (92–99 % ee; prior 68–86 % at higher temperatures). Thus, a broad impact is expected on CPA catalysis regarding reaction optimization and prediction.     

Homo-coupling of Aryl Iodide and Bromide Catalyzed by Immobilized Palladium with a Bidentate Nitrogen Ligand

The immobilized palladium onto organic‐inorganic hybrid material, which contains bidentate nitrogen ligands, was a very effective catalyst for homo‐coupling of aryl iodide and bromide. The protocol involved the use of N,N‐dimethylacetamide as a solvent, and n‐tributylamine as a base. The reaction generated the corresponding homo‐coupling products in good to excellent yields at low catalyst loading (0.20 mol%). Furthermore, the silica‐supported palladium catalyst could be recovered and recycled by a simple filtration of the reaction solution and used for five consecutive trials without loss of its activity.     

Synthesis of a new palladium salt using N‐benzyl DABCO chloride and its application in Suzuki reaction

A palladium catalyst was synthesized using N‐benzyl DABCO chloride and palladium chloride. The structure of this catalyst was characterized and then the catalyst was used in Suzuki cross‐ coupling reaction of different aryl halides with arylboronic acids. All substrates afforded the corresponding products in good to high yields in the presence of low amounts of the catalyst. Under the heating conditions employed, cheaper and more available aryl chlorides gave relatively high yields in the Suzuki reaction. Copyright © 2012 John Wiley & Sons, Ltd.     

An efficient and green protocol for synthesis of novel [1,3]oxazino[5,6-c]quinolin-5-one derivatives using [Et3NH]HSO4 as a reusable catalyst

A simple, efficient, and eco-friendly procedure has been developed using acidic ionic liquid [Et₃NH]HSO₄ as catalyst for the synthesis of novel [1,3]oxazino[5,6-c]quinolin-5-one derivatives via one-pot three-component condensation reaction of 4-hydroxyquinolin-2(1H)-one, amine and formaldehyde in aqueous ethanol at room temperature. Mild and environmentally benign reaction conditions, short reaction time, good to excellent yields, nontoxic, cheap and easily available catalyst, reusability of catalyst and reaction media, and easy work-up are the key features of this method.     

Synthesis and characterisation of a polymer-bound rhodium-benzimidazole complex as catalyst for the hydrogenation of nitroarenes

A polymer-anchored rhodium complex was synthesised by sequential attachment of benzimidazole (BzlH) and RhCl₃ to chloromethylated poly(styrene–divinylbenzene) co-polymer (PSDVB) with 6.5% cross-linking. The catalyst was characterised by X-ray photoelectron spectroscopy, far-IR, UV–Vis, FTIR, SEM and thermogravimetric analysis. Various physico-chemical properties such as bulk density, surface area and swelling behaviour in different solvents were also studied. The polymer-anchored complex was tested as a catalyst for reduction of nitroarenes, namely o,m,p-nitrobenzoic acid, nitroaniline, nitrophenol and nitrotoluene. Kinetic measurements were carried for o-nitroaniline and p-nitrophenol by varying temperature, catalyst concentration and concentration of substrates. The rate of the reaction was found to be first order with respect to catalyst concentration and also with substrate concentration at low concentrations, becoming independent of substrate at higher concentrations. A plausible mechanism for the reaction is proposed. The energy and entropy of activation calculated from Arrhenius plots indicate high activity of the catalyst on the support. The recycling efficiency of the catalyst has been studied and there was no leaching of metal from the catalyst surface.     

Guanidine‐Functionalized Resin‐Supported Pd(0) Catalyst: Activity,Reusability, and Redeposition of Active Pd Species in Heck Vinylation

The guanidine‐functionalized resin‐supported Pd(0) catalyst [GDR·Pd(0)] is highly active in Heck reaction of aryl bromides with acrylic acid or styrene without the need to exclude air. The catalyst can be recycled at least 9 times without significant loss of activity in N‐methyl‐2‐pyrrolidone at 140 °C. The Heck reaction proceeds homogeneously with dissolved palladium species and the dissolved active palladium species can redeposit onto the surface of catalyst in the reaction. The XRD peak shifting of Pd phases in the catalyst provides the evidence for the re‐deposition of the active palladium species.     

Stereospecific Cyclopolymerization with Group 4 Metallocenes

Homogeneous Ziegler-Natta catalysts are stereoselective cyclopolymerization catalysts for non-conjugated dienes. Cyclopolymerization of 1,5-hexadiene affords poly(methylene-l,3-cyclopentane) (PMCP), a polymer for which four structures of maximum order are possible. A variety of metallocene catalyst precursors have been investigated; the molecular weight and microstructure of the polymers are sensitive to the structure of the catalyst precursor as well as the reaction conditions. The selectivity for cyclization depends on reaction conditions; decreasing the olefin concentration and increasing the temperature of the reaction favor cyclization. The stereochemistry of cyclopolymers can also be controlled with appropriate choice of catalyst precursor. Diastereoselective cyclopolymerization of 1,5-hexadiene with achiral catalysts yields atactic trans-PMCP and cis-PMCP, depending on the catalyst precursor. Enantioselective cyclopolymerization with optically active catalysts yields optically active poly(methylenecyclopentane), a novel example of a polymer which is chiral by virtue of its main-chain stereochemistry.     

Efficient and Green Synthesis of N‐aryl Pyrroles Catalyzed by Ionic Liquid [H‐NMP][HSO4] in Water at Room Temperature

A suitable and efficient method for the synthesis of N‐aryl pyrroles by using 2,5‐dimethoxy tetrahydrofuran and several primary aromatic amines in the presence of the catalytic amount of [H‐NMP][HSO₄] under room temperature was described. This method has the advantages such as; easy reaction workup, absolutely separated of catalyst from the reaction mixture and smoothly recyclability of catalyst. In this reaction, N‐substituted pyrroles were obtained as desired products in excellent yields and short reaction times via green and one‐pot procedure.     

Evaluation of Fe and Ru Pincer‐Type Complexes as Catalysts for the Racemization of Secondary Benzylic Alcohols

Fe and Ru pincer‐type catalysts are used for the racemization of benzylic alcohols. Racemization with the Fe catalyst was achieved within 30 minutes under mild reaction conditions, with a catalyst loading as low as 2 mol %. This reaction constitutes the first example of an iron‐catalyzed racemization of an alcohol. The efficiency for racemization of the Fe catalyst and its Ru analogue was evaluated for a wide range of sec‐benzylic alcohols. The commercially available Ru complex proved to be highly robust and even tolerated the presence of water in the reaction mixture.