Conjugate addition reactions of alpha-aminoalkylcuprates with alpha, beta-alkenyl-, alpha,beta-alkynyl-, alpha,beta-beta,gamma-allenyl-, and alpha,beta-gamma,delta-dienyl carboxylic acid derivatives, nitriles, and sulfoxides

alpha-Aminoalkylcuprates prepared from alpha-lithio carbamates and CuCN.2LiCl participate in 1,4-addition reactions with alpha, beta-unsaturated esters, thiol esters, imides, and nitriles in poor to excellent yields depending upon the electron-withdrawing substituent and the substitution pattern of the unsaturated substrate. These reagents also undergo conjugate addition reactions with alpha,beta-alkynyl esters, sulfoxides, and nitriles and with alpha,beta-beta,gamma-unsaturated allenyl esters. Excellent stereocontrol is achieved in the conjugate additions of alpha-aminoalkylcuprates to the allenyl esters, while poor stereoselectivity results in the conjugate additions to the alkynyl derivatives. Deprotection and cyclization of the alkynyl adducts affords pyrrolin-2-ones, while similar treatment of the allenyl adducts affords 4-alkylidine- pyrrolidin-2-ones and pyrrolizidinones.     

Simultanbestimmung von Si, Mn, P, Cu, Al, Ni, Cr, Mo, V, Ti, Co und As in St?hlen mit ICP-AES

Summary A universal method for quantitative analysis of twelve elements in low-alloy steels is described. The samples are digested in a mixture of sulfuric-/nitric acid/ammonium peroxodisulfate. Si, Mn, P, Cu, Al, Ni, Cr, Mo, V, Ti, Co, As are determined in solution by ICP-AES. The procedure was tested with NBS and BCS reference samples. The analytical results are in good agreement with the certified values. With slight modifications, the method is applicable to the analysis of high-alloy steel samples.     

电感耦合等离子体质谱法(ICP-MS)测定稀土矿中钇、镧、铈、镨、钕、钐、铕、钆、铽、镝、钬、铒、铥、镱、镥和钪量

通过用四酸与微波消解法溶解样品对比,建立了用硝酸、盐酸、氢氟酸、高氯酸分解样品,采用电感耦合等离子体质谱法(ICP-MS)测定稀土矿中16种元素含量。方法采用_¹⁰³Rh作为内标消除干扰,确定了最优测定条件,16种稀土元素检出限为0.0029-0.0099ng/mL,测定范围为0.0005-0.020%。精密度试验、加标回收试验及标准物质检测,结果验证了方法的可行性及准确性。该方法简单易操作,结果可靠,能满足实验分析要求。     

Organogermyl,Organostannyl, and Organoplumbyl Phosphines,Arsines, Stibines,and Bismuthines

The preparation, properties, and reactions of the compounds named in the title are described, with particular reference to the possible participation of (p→d)_π components in the bonding between the group IVB and the group VB elements.     

Synthesis, spectroscopy, and electrochemistry of tetra-tert-butylated tetraazaporphyrins, phthalocyanines, naphthalocyanines, and anthracocyanines, together with molecular orbital calculations

Tetraazaporphyrins (TAPs), phthalocyanines (Pcs), naphthalocyanines (Ncs), and anthracocyanines (Acs) with four tert-butyl groups attached at similar positions have been synthesized, and their electronic absorption, magnetic circular dichroism (MCD), IR, and voltammetric properties were studied and interpreted with the help of quantum-mechanical calculations. Through the preparation of a series of compounds with the same number of the same substituent, the effects of the increase in the size of the ring system were clearly derived. The main results may be summarized as follows. 1) The Q band shifts to longer wavelength and its intensity increases, but with decreasing degree of change with increasing molecular size. If the size of the effect of benzene directly fused to the TAP skeleton is set at unity, the effects of the second and third benzene units are roughly 0.8 and 0.5, respectively. 2) The splitting of the Q bands in metal-free compounds decreases with increasing molecular size, so that the Q bands of H2Nc and H2Ac appear as single bands. 3) The magnitude of the orbital angular momentum of the excited state of the ligand decreases with increasing molecular size. 4) Interestingly, the ring current, as judged from the positions of pyrrole proton signals in the 1H NMR spectrum, appears to decrease with increasing molecular size. 5) The first reduction potential becomes less negative, but only slightly, whereas the first oxidation potential shows a marked shift to less positive values with increasing molecular size, indicating that the HOMO destabilizes significantly as the molecule becomes larger. 6) In 5), the extent of the HOMO destabilization with molecular size differs depending on the central metal, so metals producing smaller destabilization effects can allow larger macrocycles. Of the metals studied, the most effective is cobalt, and the practical size limit is represented by the Acs. 7) The IR spectra become simpler the larger the molecule, and the main bands were assigned by DFT calculations. 8) The trend in experimentally determined redox potentials and electronic absorption and MCD spectra were reasonably reproduced by MO calculations using the ZINDO/S Hamiltonian. 9) EPR data for several metallocomplexes are also reported.     

van der Waals corrections to density functional theory calculations: Methane,ethane, ethylene,benzene, formaldehyde,ammonia, water,PBE, and CPMD

Parameters are developed for a practical application of the empirical van der Waals (vdW) correction infrastructure available in the CPMD density functional theory (DFT) code. The binding energy, geometry, and potential energy surface (PES) are examined for methane, ethane, ethylene, formaldehyde, ammonia, three benzene dimer geometries, and three benzene–water geometries. The vdW corrected results compare favorably with MP2 and CCSD(T) calculations near the complete basis set limits, and with experimental results where they are available.     

Synthesis and characterization of metal-centered, six-membered, mixed-valent, heterometallic wheels of iron, manganese, and indium

Heptanuclear metal-centered, six-membered, mixed-valent, heterometallic wheels 1-3 of iron, manganese, and indium were prepared in a one-pot reaction from N-benzyldiethanolamine (H2L(1)), cesium carbonate, [PPh4]2[MnCl4], and FeCl3 or InCl3. All three complexes were characterized by the combination of elemental analysis, FAB mass spectroscopy, X-ray diffraction and cyclic voltammetry and in the case of 1 additionally by M?ssbauer spectroscopy. In 1, four Mn(II) ions in the periphery are arranged in pairs alternating with one Fe(III) ion each, with an Fe(III) ion located in the center. In 2, three Mn(II) ions alternate with three In(III) ions, whereas in 3, four In(III) ions are arranged in pairs and alternate with one Mn(II) ion each. In 2 and 3 an Mn(II) ion is encapsulated in the center.     

Interaction of gallium, indium, thallium, germanium, tin, and lead with boron

Summary Investigations of the interaction of boron with gallium, indium, thallium, germanium, tin, and lead with boron showed that these elements do not form chemical compounds or solid solutions with boron.The absence of any interaction between these elements and boron is explained in the light of a discussion of the electronic structure and energy characteristics of the valence electrons of metals of the IIIB and IVB subgroups of the periodic system.Translated from Zhurnal Strukturnoi Khimii, Vol. 1, No. 4, pp. 458–463, November–December, 1960     

Determination of zirconium, barium, lanthanum, aluminium, sodium, hafnium and fluorine in fluorozirconate glasses

Summary A procedure is described for the determination of the cationic and anionic components in fluorozirconate glasses. Zirconium, barium, aluminium, lanthanum, sodium and hafnium were determined by inductively coupled plasma atomic emission spectrometry (ICP/AES) after dissolution of the sample with an acid mixture in a microwave oven. The fluorine content was evaluated with two different techniques, namely potentiometry with a fluoride ion-selective electrode (FISE) and ion chromatography (IC). In this case the sample was solubilized by fusion with sodium carbonate.     

电感耦合等离子体发射光谱法测定REACH法规涉及产品中铅、铬、钴、砷、锡、铝、锆、钼和硼

采用电感耦合等离子体原子发射光谱法对REACH法规涉及产品中铅、铬、钴、砷、锡、铝、锆、钼和硼的含量进行测定。0.2g样品经微波消解处理,聚合物材质试样以8mL硝酸和2mL过氧化氢为消解试剂;无机非金属材质试样以6mL硝酸、2mL过氧化氢和2mL氢氟酸为消解试剂。各元素的方法检出限均低于15mg·kg-1。方法的加标回收率在82.4%～108%之间,测定值的相对标准偏差(n=7)在3%～6%之间。     

2,4,5-三氧-1,3,2,4-二氮二磷杂环戊烷衍生物的合成和结构

本文报道了七个新的2,4,5-三氧-1,3,2,4-二氮二磷杂环戊烷衍生物的制备, 产物的结构经IR, ^1H和^31P NMR, MS以及元素分析证实, 并利用^31P NMR和GC-MS区分了化合物的顺式和反式异构体。     

ICP-AES法同时测定玻璃组份中的Ca、Mg、Ti、Fe、Pb、Cd、Al、Si、B、Zn、Cu元素

建立了一种用电感耦合等离子发射光谱(ICP-AES)法测定玻璃成份的简便、快速、准确、精密度好的方法．研究了样品的处理、标准样品的配制、谱线干扰等问题,并采用和基体匹配的方法消除基体的影响,进行了标准样品的分析、对照、精密度等试验,均取得了满意的结果．     

冠心病患者血清钙、镁、铁、铜、铬、铝变化的临床观察

观察血清钙、镁、铁、铜、铬、铝与不同类型冠心病的关系,将冠心病患者分为三组:(1)冠状动脉痉挛30例;(2)稳定型心绞痛(SAP)患者27例;(3)急性冠脉综合症(ACS)患者35例,以34例健康者为对照组(NC),利用ICP-AES法测定了其血清钙、镁、铁、铜、铬、铝。结果表明,与正常对照组比较,钙水平在冠状动脉痉挛组和稳定型心绞痛组偏低(P<0.05或P<0.01),男性急性冠脉综合症组血清铝偏低(P<0.05)。提示血清钙水平下降可能与稳定型心绞痛及冠状动脉痉挛有关,而男性血清铝水平下降可能与急性冠脉综合症有关。     

Theoretical Study on the Structure and Stability of Si5X （X = Li, Be, B, C, N, O, F, Na, Mg, Al, Si, P, S, Cl） Clusters

1 INTRODUCTION In the later 60s of last century, silicon substituted for germanium to present as mainstream in semicon- ductor. The semi-conductive devices made by silicon have many advantages, for example, refractory pro- perty, high radioresistance, simple and stable process- ing technic, high machinability and low cost. So it was widely used to manufacture large power appara- tuses, for instance, digit and linear integrated circuit, large scale integrated circuit (LSI), etc. Thus, th…     

Determination of Al,As, Co,Cr, Cs,Fe, Mn,Sb, Sc,W and Zn in the workroom air by Instrumental Neutron Activation Analysis

The welding fumes in shops in the Montreal area were sampled by using a small pump and the PVC filters. The SLOWPOKE reactor was used to determine the concentration of Al, As, Co, Cr, Cs, Fe, Mn, Sb, Sc, W and Zn in filters by instrumental neutron activation. The average concentrations found for these elements are 174, 2.74, 1.26, 26.1, 2.96, 10445, 1254, 0.66, 0.037, 0.67 and 119 g/m³, respectively. They were compared with Maximum Acceptable Limits in force in Quebec and with Average Detection Limits of these elements in the workroom air.     

S-, S,S-, S,S,S- Und N,S-Substituierte Dienverbindungen Und Dibutadienylpiperazinverbindungen Von 2-Nitropentachlorbutadien

Nitrodiene compound 1 was stirred with allylthiol for a long time and compound 3 was obtained. Compound 1 gave bis(thio)substituted 2-nitrodiene compound 4 and tris(thio)substituted 2-nitrodiene compound 5 with 2 moles allylthiol in the presence of NaOH in ethanol. Mono(allylthio)substituted diene compound 3 gave dibutadienyl substituted piperazine compounds with piperazine 6 in CH 2 Cl 2 (or diethylether). Compound 3 gave compound 9 with compound 8 . Compounds 11a-e have been obtained from the reaction of compound 3 with compounds 10a-e . Nach langem Rühren von der Verbindung 1 mit Allylthiol entsteht die Verbindung 3 . Die Verbindung 1 liefert mit zwei Mol von Allylthiol in ethanolischer Natronlunge die bis(thio)substituierte 2-Nitrodienverbindung 4 und tris(thio)substituierte Dienverbindung 5 . Mono(allylthio)substituierte Dienverbindung 3 ergibt mit Piperazine in CH 2 Cl 2 (oder in Ether) die dibutadienylsubstituierte Piperazinverbindung 7 . Die Verbindung 3 liefert mit der Verbindung 8 die Verbindung 9 . Durch die Reaktion von der Verbindungen 10a-c wurden die Verbindungen 11a-e erhalten.     

等离子体原子荧光光谱法测定碳酸锂中钠、钾、钙、镁、铜、铁、钴、镍、锰、锌、镉

建立了用ICP-AFS同时测定碳酸锂中11种微量金属杂质元素的方法。加入甲烷可改善检出限,方法简便,样品分析结果与AAS法结果一致。     

Transition-metal-free O-, S-, and N-arylation of alcohols, thiols, amides, amines, and related heterocycles

A new protocol for the Ullmann-type arylation process of different aromatic heterocycles without any transition-metal catalyst, implying the use of a combination of an excess of potassium hydroxide and dimethyl sulfoxide, is described. The reaction can be performed between a broad range of starting nucleophiles including phenol, alcohols, amines, nitrogen-containing five-membered systems such as pyrazoles, imidazoles, and indoles, and amides with haloarenes, iodide and bromide derivatives giving the best results, the possible pathway involving the in situ generation of the corresponding benzyne intermediate. When the reaction was performed with 2-iodoaniline and either carboxamides or isothiocyanato derivatives, the corresponding benzoazole derivatives were obtained.     

Magnetic nanoparticles: Synthesis, stabilization, functionalization, characterization, and applications

This review focuses on the synthesis, protection, functionalization, characterization and with some applications of magnetic nanoparticles (MNPs). The review begins with an overview on magnetic property and single domain particles. The synthetic strategies developed for the generation of MNPs, with a focus on particle formation mechanism and recent modifications made on the synthesis of monodisperse samples of relatively large quantities are also discussed. Then, different methodologies for the protection and functionalization of the synthesized MNPs, together with the characterization techniques are explained. Finally, some of the recent industrial, biological, environmental and analyticals application of MNPs are briefly reviewed, and some future trends and perspectives in these research areas will be outlined.