Chiral recognition and separation of beta2-amino acids using non-covalently molecularly imprinted polymers

Non-covalently molecularly imprinted polymers (MIPs) for beta2-amino acids were prepared for the first time. N-(2-chlorobenzyloxycarbonyl)-(R)-beta2-homophenylalanine (N-2-ClZ-(R)-beta2-HPhe) was imprinted with methacrylic acid (MAA) and/or 4-vinylpyridine (4-VPy) as the functional monomers, with ethylene glycol dimethacrylate (EDMA) as the cross-linker. The MIPs made with different ratios of MAA:4-VPy were studied in HPLC mode. The results show that MIPs made with 4-VPy yielded the best chiral separation factor (alpha= 1.86) for the template molecule. The importance for an efficient separation of pi-stacking interactions between the MIPs and the template molecule is demonstrated. Racemates of Z-alpha-amino acids and beta-amino acid analogues of the template were either not or poorly resolved by the MIPs, thus demonstrating the close three-dimensional complementarity of the MIPs' recognition sites with the template.     

液晶分子印迹整体柱的制备及其分子识别热力学

液晶分子印迹聚合物(MIPs)因刚性液晶单体的加入而在超低交联度水平下也能印迹和识别模板分子,有效解决了传统MIPs因高交联度造成的位点包埋、结合容量低、传质慢等问题。尽管液晶MIPs具有如此独特的优势,但却面临着由于交联度的大幅度降低而导致印迹效果下降的问题。为了研究液晶MIPs的结合特性,制备具有良好印迹效果的低交联液晶MIPs,该文通过二次接枝聚合,制备了一系列不同交联度的液晶分子印迹整体柱,用高效液相色谱法研究了聚合参数与印迹整体柱亲和性的关系。实验中选用三羟甲基丙烷三甲基丙烯酸酯(TRIM)为交联剂,以甲苯和十二醇为致孔剂合成整体柱骨架,并在此基础上以(S)-萘普生为模板,加入液晶单体4-氰基苯基单环己基乙烯(CPCE)进行二次聚合接枝。实验中系统考察了流动相中乙腈比例及缓冲液pH值对色谱保留的影响,结果发现液晶单体的加入使得MIPs对萘普生保留控制机制由原来的氢键作用变为了疏水作用;通过动态吸附实验得到的突破曲线经前沿分析及对吸附等温线Langmuir、Freundlich和Scatchard分析拟合,发现交联度为15%时液晶MIPs印迹因子最大(3.78)、非均一性最强,且特异性吸附量高于非特异性吸附量。液晶MIPs的计量置换模型(SDM-R)分析表明,液晶印迹整体柱对模板分子的总亲和力(ln A=0.645)明显高于其类似物;而从空间匹配程度看,与液晶印迹整体柱空间匹配程度最高的是酮洛芬而非模板分子,但液晶印迹整体柱对酮洛芬的总亲和力(ln A=0.242)不及模板分子的一半,表明在本低交联液晶印迹系统中,空间效应不是决定印迹系统识别能力的主要因素。进一步的分离热力学研究发现,低交联液晶印迹柱的|ΔΔH|<T|ΔΔS|,而交联度为70%的非液晶MIPs柱的|ΔΔH|>T|ΔΔS|,表明液晶MIPs的分离过程是一个熵控制过程,而常规无液晶MIPs的分离过程是一个焓控制过程。上述结果表明,液晶单体的加入改变了MIPs的识别机制,适当的低交联度可显著提高液晶MIPs的识别性能,因此液晶MIPs这些特质有望使其成为新一代的MIPs。     

A novel molecular imprinting polymer for the selective adsorption of D-arabinitol from spiked urine

In this research, molecular imprinting polymers (MIPs) for D-arabinitol were synthesized using a bulk polymerization method through a noncovalent approach. The MIPs were prepared by using D-arabinitol as a template, acrylamide as a functional monomer, ethylene glycol dimethacrylateas cross-linker, benzoyl peroxide as an initiator and dimethyl sulfoxideas a porogen. MIPS was synthesized in several formulas with a different molar ratio of template to functional monomers and cross-linker. Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) were used to characterize the MIPs produced. A batch rebinding assay was used to test the binding efficiency of each formula. Batch rebinding test results revealed that MIPsF3 with a molar ratio of the template: monomer and crosslinker ratio respectively (1: 4: 25) had the highest binding capacity at 1.56 mgg ^-1 . The results of isotherm adsorption showed that the MIPs produced followed the Freundlich equation with an R-value of 0.97. The MIPs produced was also selective toward its isomeric compounds (i.e. L-arabinitol, adonitol, xylitol, and glucose). The extraction efficiency of the MIPs against D-arabinitol was 88.98%.     

槲皮素金属配位分子印迹聚合物的识别性能

以槲皮素与Zn(Ⅱ)的配合物为模板,在甲醇溶液中制备金属配位分子印迹聚合物.通过紫外光谱研究了槲皮素与Zn(Ⅱ)的配位方式及配位比,验证了槲皮素、Zn(Ⅱ)和4-乙烯基吡啶之间的三元配位作用.利用红外光谱对产物的结构进行了表征.用平衡结合实验考察了功能单体及交联剂用量对聚合物吸附性能的影响,优化了聚合物的反应配比.同时对系列印迹聚合物的识别体系进行了考察.结果表明,槲皮素-Zn(Ⅱ)模板印迹聚合物对槲皮素-Zn(Ⅱ)的配合物表现出明显的吸附选择性和特异性,对槲皮素结构类似物芦丁和柚皮素的吸附选择性较差,分离因子分别为3.21和1.91.     

Molecularly Imprinted Polymers: Compromise between Flexibility and Rigidity for Improving Capture of Template Analogues

New synthetic strategies for molecularly imprinted polymers (MIPs) were developed to mimic the flexibility and mobility exhibited by receptor/enzyme binding pockets. The MIPs were prepared by bulk polymerization with quercetin as template molecule, acrylamide as functional monomer, ethylene glycol dimethacrylate as cross‐linker, and THF as porogen. The innovative grafting of specific oligoethylene glycol units onto the imprinted cavities allowed MIPs to be obtained that exhibit extended selectivity towards template analogues. This synthetic strategy gives promising perspectives for the design of molecular recognition of molecules based on a congruent pharmacophore, which should be of interest for drug development.     

New insight into modeling non-covalently imprinted polymers

Three series of polymers were carefully formulated with increasing amounts of template while keeping the polymer components constant. The number of binding sites (N) and the number average association constant (K(n)()) were calculated for each polymer in a series, using equations adapted from the literature describing molecularly imprinted polymers (MIPs). The trends of N and K(n)() for each series of polymers, which were graphed versus percent template, suggest multiple functional monomers in the binding sites of noncovalent MIPs. This new insight has implications for understanding the underlying mechanisms for the formation of binding sites in the MIPs studied.     

分子印迹技术在毛细管电色谱中的应用

分子印迹技术是制备具有分子识别功能聚合物，即分子印迹聚合物（MIPs)的一种新技术；毛细管电色谱（CEC）是一个具有发展前途的色谱新技术。将分子印迹技术和毛细管电色谱两种新技术相结合，优势互补，具有极大的发展潜力。本文对分子印迹技术在毛细管电色谱中的应用，以及各类MIPs-CEC毛细管柱的制备方法进行了较为全面的综述，引用文献52篇。     

Probing cavity versus surface preference of fluorescent template molecules in molecularly imprinted polystyrene microspheres

Functional polystyrene (PS) crosslinked microbeads were developed by dispersion polymerization as fluorescent molecularly imprinted polymers (MIPs) having cavities with specific recognition sites. The functional azobenzene molecule modified with pyridine was self‐assembled with Pyrenebutyric acid (template molecules), and introduced during the second stage of dispersion polymerization of polystyrene. The template molecule was removed from MIP by Soxhlet using acetonitrile as solvent. Non imprinted polymer (NIP) having no template was also synthesized for comparative study. Fluorescence spectroscopy could be used as a tool to derive insight into the location of the template molecules on the MIP or NIP. The template molecules were adsorbed on the surface of the NIPs during binding studies, which was evidenced from the pyrene excimeric emission observed at 440 nm. The template binding efficiency of the NIPs were much lower compared to MIPs. Pyrene emission from MIP upon rebinding showed typical monomeric emission in the 375–395 nm range, confirming its location in isolated cavities. In rebinding studies of the template molecules, the MIPs selectively took up the template for which the cavity was designed, which demonstrated their selectivity towards template molecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1558–1565     

核壳结构的萘夫西林磁性分子印迹聚合物微球的制备及性能

以表面修饰双键的Fe₃O₄@SiO₂纳米颗粒为基体,以萘夫西林(nafcillin)为模板,甲基丙烯酸(MAA)为单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用三步升温聚合法合成了核壳结构的萘夫西林磁性分子印迹聚合物。采用傅里叶变换红外光谱仪(FT-IR)、透射电子显微镜(TEM)、X射线衍射仪(XRD)和振动样品磁强计(VSM)对制备的印迹聚合物微球进行了表征,得到的磁性印迹聚合物微球的粒径在320 nm左右,大小均匀,分散性较好,可以在外加磁场下与溶剂实现快速分离。对磁性印迹和非印迹聚合物进行了吸附性能研究,结果表明该印迹聚合物微球对模板分子具有很高的吸附容量(50.7 mg/g),特异性识别性能良好(印迹因子为2.46),有望应用于实际样品中萘夫西林残留量的富集分析。     

Highly selective separations by capillary electrochromatography: molecular imprint polymer sorbents

Molecular imprint polymers (MIPs) are synthesized in the presence of a template, or 'imprint' molecule which results in the formation of specific recognition cavities complementary to the template in shape and chemical functionality. The resultant MIP then acts as a selective binding medium for the template molecule. The utility of MIPs lies in the selectivity of the rebinding process, which is based on molecular recognition. In many cases, the selectivity achieved with MIPs toward a particular molecule is comparable to that observed with antibodies. This has led to the application of MIPs to several areas of analytical chemistry including immunoassays, sensors and separations media. One of the most successful application areas of MIPs has been as chromatographic sorbents, where they have been utilized predominately in chiral separations. The use of MIP sorbents in CEC is attractive in that it combines the selectivity of a molecular recognition process with the enhanced flow dynamics of CEC, which can result in higher efficiency and shorter analysis times. This paper will review the use of molecular imprinted stationary phases in CEC. Following a brief introduction to molecular imprinting, various methodologies for preparation of MIP-CEC capillaries in addition to applications of the technique will be discussed.     

Surface imprinted polymers for oil denitrification with the combination of computational simulation and multi‐template molecular imprinting

Multi‐template molecular imprinting technique was employed for the theoretical study about industrial oil denitrification. Prior to the preparation of multi‐template molecularly imprinted polymers (MT‐MIPs), density functional theory was used for simulating the imprinted pre‐assembly systems composed of template (aniline, indole, or 3‐methylinndole) and monomer [methacrylic acid, acrylamide (AM), and 4‐vinylpyridine]. MT‐MIPs were synthesized as surface MIPs simply and successively by seeded emulsion polymerization or two‐stage precipitation polymerization. The experimental results were consistent with the simulative results, which demonstrated that AM was more suitable monomer together. In addition, seeded emulsion polymerization synthesized MT‐MIPs with better performance compared with two‐stage precipitation polymerization. The adsorption kinetics and adsorption isotherm of MT‐MIP prepared with AM using seeded emulsion polymerization were fitted with different models. The fitting results indicated that pseudo‐second‐order kinetics model and Freundlich isotherm model were suitable for describing the adsorption process of AM seeded emulsion polymerization. This study will provide a certain guidance and theoretical basis for introducing the combination of multi‐template molecular imprinting technique and computational simulation into the field of industrial denitrification. Copyright © 2015 John Wiley & Sons, Ltd.     

Molecularly imprinted polymers as a tool for separation in CEC

Molecularly imprinted polymers (MIPs) are synthesized in the presence of a template which results in the formation of specific recognition cavities complementary to the template in shape and chemical functionality. One of the most successful application areas of MIPs is chromatographic sorbents, which are tailor-made synthetic polymers for a given analyte. However, low efficiency of MIP columns is often observed because of slow kinetics of the template. CEC-based MIPs are thought to improve efficiency of MIP-based separation due to the enhanced flow dynamics of CEC. Another attractive feature is the miniaturized format of CEC, so that fewer templates or monomers for the molecular imprinting are consumed, a characteristic desired for 'green chemistry'. The small dimensions of a capillary demand the development of novel polymer formats that can be applied to a miniaturized system. This review discusses the various formats, i.e., the micro- or nanoparticle, the coating and the monolith, for application in CEC as well as the use in MIP syntheses and characteristics.     

Synthesis and chromatographic evaluation of molecularly imprinted polymers prepared by the substructure approach for the class-selective recognition of glucuronides

Two series of molecularly imprinted polymers (MIPs) for the class-selective recognition of glucuronides have been prepared by using lipophilic substructures of the target analyte as template molecule and potent host monomers against oxyanions, that are expected to establish a strong stoichiometric interaction with the single carboxylic group of the template. The polymers were tested as stationary phases in liquid chromatography for specific recognition. A preliminary investigation of the imprinting properties of eleven MIPs was carried out, by comparing the retention time of the template and of structurally related compounds on the MIP column with that on the corresponding non-imprinted polymer (NIP). The two polymers showing the best performance were selected to further test cotinine, mycophenolic acid, testosterone and their respective glucuronides as model compounds. The high specificity obtained against glucuronides and the different chemical structure of the parent drug make the two MIPs class-selective imprinted receptors, also suitable for SPE application.     

Preparation of hydrophilic molecularly imprinted polymers for tetracycline antibiotics recognition

Hydrophilic molecularly imprinted polymers(MIPs) were prepared using tetracycline as template,methacrylic acid as monomer and glycidilmethacrylate as pro-hydrophilic co-monomer.Compared with common MIPs,the imprinting effect and adsorption amounts of hydrophilic MIPs for tetracycline(TC) were greatly improved in water media.Furthermore,the electrochemical sensor fabricated by modifying hydrophilic MIPs on glassy carbon electrode was developed for the determination of TC in foodstuff samples.     

A study of competitive molecular interaction effects on imprinting of molecularly imprinted polymers

The work herein reports on an approach to obtain molecularly imprinted polymers (MIPs) for Atmer 129, an antistatic added to polyolefins and a previously non imprinted template with intra molecular H-bonding capability. The template–monomer interactions occurring in pre- and post-polymerization media were analyzed by FTIR and ATR-FTIR, respectively. After the prepolymerization study, the synthesis conditions were discussed and suitable porogens and potential template:monomer stoichiometries were suggested. The imprinting efficiency and selectivity of MIPs were evaluated in batch assays by HPLC or UPLC and compared with thermal behavior and morphological characteristics checked by Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM). The best results were obtained for MIPs synthesized at 60 °C. A relation between imprinting effect and template shape recognition was suggested by selectivity studies. The major conclusion, which has been drawn from FTIR and DSC studies, is that independently of the H-bonding strength between Atmer 129 and monomer, the template started to crystallize out during the polymerization reaction, thus reducing the imprinting effect.     

Affinity screening by packed capillary high performance liquid chromatography using molecular imprinted sorbents. II. Covalent imprinted polymers

This study concentrates on the production of covalent molecular imprint polymers (MIPs) as highly selective sorbents for nortriptyline (NOR), a representative tricyclic antidepressant (TCA). The functionalized template contains a polymerizable 4-vinylphenyl carbamate moiety used to bind the template molecule to the polymer matrix. Polymerization with a cross-linker followed by hydrolytic cleavage of the labile carbamate functionality leaves an MIP with selective binding sites capable of binding template through hydrogen bonding interactions. Demonstrated chromatographically through a "selection index", these MIPs showed high selectivity for the template molecule (NOR) among a library of structurally similar compounds. The recognition was found to correlate with structural similarity to the template compound. A direct comparison between covalent and non-covalent molecular imprinting strategies reveals a great deal of improvement in the peak shape of the retained compound resulting from covalent imprinting (evidenced by peak asymmetry factors A.).     

Synthesis of molecularly imprinted polymers via ring-opening metathesis polymerization for solid-phase extraction of bisphenol A

The use of molecularly imprinted polymers (MIPs) prepared by ring-opening metathesis polymerization (ROMP) for bisphenol A (BPA) was reported in this article. The resulting MIPs have high imprinting and adsorption capacities, and can be used for separation and determination of BPA in environmental water samples. The successful application of ROMP in the molecular imprinting field is described here. For the first time, two cross-linkers (dicyclopentadiene and 2,5-norbornadiene) and two Grubbs catalysts (first and second generation) were investigated to compare their effects on the binding performance of MIPs. The ROMP technique is able to create the imprinted polymers within 1 h under mild conditions. Furthermore, it can provide MIPs with obvious imprinting effects towards the template, very fast template rebinding kinetics, high binding capacity and appreciable selectivity over structurally related compounds. The adsorption process for MIPs in this study can be completed within 45 min, which is much faster than that of bulk MIPs synthesized by traditional free-radical polymerization. The resulting imprinting polymer was evaluated for its use as a sorbent support in an off-line solid-phase extraction approach to recover BPA from diluted aqueous samples. The optimized extraction protocol resulted in a reliable MISPE method suitable for selective extraction and preconcentration of BPA from tap water, human urine and liquid milk samples. This article demonstrates the practical feasibility of the MIPs prepared via ROMP as solid-phase extraction materials.     

Application of Molecularly Imprinted Polymers in the Analysis of Waters and Wastewaters

The increase of the global population and shortage of renewable water resources urges the development of possible remedies to improve the quality and reusability of waste and contaminated water supplies. Different water pollutants, such as heavy metals, dyes, pesticides, endocrine disrupting compounds (EDCs), and pharmaceuticals, are produced through continuous technical and industrial developments that are emerging with the increasing population. Molecularly imprinted polymers (MIPs) represent a class of synthetic receptors that can be produced from different types of polymerization reactions between a target template and functional monomer(s), having functional groups specifically interacting with the template; such interactions can be tailored according to the purpose of designing the polymer and based on the nature of the target compounds. The removal of the template using suitable knocking out agents renders a recognition cavity that can specifically rebind to the target template which is the main mechanism of the applicability of MIPs in electrochemical sensors and as solid phase extraction sorbents. MIPs have unique properties in terms of stability, selectivity, and resistance to acids and bases besides being of low cost and simple to prepare; thus, they are excellent materials to be used for water analysis. The current review represents the different applications of MIPs in the past five years for the detection of different classes of water and wastewater contaminants and possible approaches for future applications.     

有机磷神经毒剂分子印迹聚合物的模拟模板分子

采用DFT/B3LYP-D3(BJ)/6-31G(d,p)计算模拟方法分析探讨了双(对硝基苯基)磷酸酯(BNPP)替代对氧磷(PO)用作有机磷神经毒剂分子印迹聚合物(MIPs)模板分子模拟物的可行性. 通过对比BNPP和PO两种模板分子分别与各种功能单体形成的复合物的构型稳定性和结合能大小, 确认了以4-甲基丙烯酰胺基安替比林(MAAP)为第一功能单体、 甲基丙烯酸(MAA)为第二功能单体组成的双功能单体体系是最佳功能单体体系. 以BNPP为模板分子、 MAAP-MAA为单体体系、 乙二醇二甲基丙烯酸酯(EGDMA)为交联剂、 纳米二氧化硅为载体, 采用表面印迹技术制备了SiO₂@BNPP分子印迹聚合物, 并对聚合物的表面形貌和吸附性能进行了分析. 实验结果表明, 当n(BNPP)/n(MAAP)/n(MAA)/n(EGDMA)为1∶1∶4∶20时, MIPs的吸附容量最大可达19.03 mg/g, 对4-硝基苯酚(4-NP)的分离因子为17.50; MIPs能够快速吸附模板分子, 5 min即可达到吸附平衡量的92%, 动态吸附平衡时间仅为15 min, 重复使用5次后仍能保持良好的吸附能力; 吸附过程符合准二级动力学模型和Langmuir等温吸附模型, Scatchard方程分析表明MIPs中存在两类吸附作用位点. 实验结果与计算模拟结果的一致性表明, 计算模拟对有机磷神经毒剂MIPs的设计和研究具有一定的指导意义.     

Molecular imprinting made easy

A simple method of molecular imprinting is presented that uses a single cross-linking monomer N,O-bismethacryloyl ethanolamine (NOBE) along with template, initiator, and solvent. This formulation eliminates the need for additional functional monomers and empirical optimization of relative ratios of functional monomers, cross-linkers, and template. In fact, utilization of NOBE alone often provides molecularly imprinted polymers (MIPs) with higher performance than MIPs incorporating functional monomer (e.g., methacrylic acid).