Synthesis and self-assembly of stimuli-responsive poly(2-(dimethylamino) ethyl methacrylate)-block-fullerene (PDMAEMA-b-C60) and the demicellization induced by free PDMAEMA chains

Well-defined poly(2-(dimethylamino) ethyl methacrylate)-block-fullerene [60] ((PDMAEMA)-b-C(60)) with a galactose targeting moiety was prepared by atom-transfer radical polymerization (ATRP). This copolymer was designed for possible use as a targeted drug carrier. The chemical composition and the self-assembly behavior were characterized using different techniques, including GPC, NMR, UV, and DLS. The self-assembly of the galactose-functionalized PDMAEMA-b-C(60) structure in aqueous solutions was investigated using dynamic light scattering (DLS) under different pH conditions. At pH 3 and 10, the DLS results showed the presence of both polymeric micelles and unimers. However, a smaller R(h) was observed at pH 10 than at pH 3 because of electrostatic repulsion at low pH values. In addition, free PDMAEMA chains induced the demicellization of self-assembled nanostructures caused by the formation of a charge-transfer complex between PDMAEMA and C(60.) This phenomenon offers possible applications for free-polymer-triggered drug release.     

聚(甲基丙烯酸N,N-二甲氨基乙酯)的温度和pH敏感性及其对乳液稳定性的影响

甲基丙烯酸N,N-二甲氨基乙酯的均聚物(PDMAEMA)在水中的溶解性具有温敏性,即低温溶解、高温不溶,而且其低临界溶液温度(LCST)与pH密切相关.本文重点考察了PDMAEMA水溶液在不同温度、pH值、溶液离子强度时的相转变特性,并研究了水溶液中乳化剂对PDMAEMA的疏水相互作用和增溶稳定作用.将PDMAEMA的温敏相转变行为同有关乳液的稳定性相关联,揭示了改善乳液稳定性的内在机制.     

In-situ polymerization at the interfaces of micelles: a "grafting from" method to prepare micelles with mixed coronal chains

Herein we describe a new strategy for producing micelles with mixed coronal chains. This method involves attachment of an atom transfer radical polymerization (ATRP) initiator at the interface of a micelle and preparation of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes at the interface by a "grafting from" method. Poly(ethylene glycol)- block-polystyrene (PEG- b-PS) diblock copolymer was achieved by ATRP. After the sulfonation reaction PS blocks were partly sulfonated. In aqueous solution at low pH the sulfonated block copolymer self-assembled into micelles with PS cores and PEG coronae and sodium 4-styrenesulfonate groups were distributed at the interfaces of the micelles. An ATRP initiator consisting of a quaternary ammonium salt moiety and a 2-bromo-2-methyl propionate moiety was ion exchanged onto the interface of the micelle. ATRP of DMAEMA was initiated at the interface, and micelles with PEG/PDMAEMA mixed coronal chains were prepared by ATRP. The structures of the micelles were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), and zeta potential measurements. The size and morphology of the micelles were controlled by pH in aqueous solution. At high pH, PDMAEMA brushes collapse, forming nanodomains on the surface of the micelles. PDMAEMA brushes in the coronae of the micelles could be used as a template for preparation of gold nanoparticles.     

Synthesis of associating poly(acrylic acid) in supercritical carbon dioxide and its solution properties

Hydrophobically associating polymers have been synthesized in supercritical carbon dioxide by copolymerization of acrylic acid with different amounts of acrylate with hydrocarbon or fluorocarbon groups. It was found that conversion of hydrocarbon comonomers was above 95% whereas that for fluorocarbon comonomers was only about 50%. In addition, large amounts of hydrophobic groups could be easily introduced to poly(acrylic acid) by reaction in supercritical carbon dioxide. The solution properties were investigated by rheology. The results indicated that intermolecular association of the copolymer was strong and viscosity was maximum under acidic conditions. In aqueous solutions fluorocarbon hydrophobes associated much more strongly than the hydrocarbon variety, but the viscosifying effect of PAAC-18 series copolymers in 2% (w/w) solution was more pronounced than that of the PAAF series, results which did not agree with the conclusions of Ravey and Stébé. It was also found that the thixotropy behavior of copolymer solution at pH 3.2 was more complex than that at pH 5.0, at which pseudoplasticity only was observed for solutions of all copolymers. Contact angles of copolymer solutions on a glass sheet were measured. The data indicated that contact angles of hydrocarbon-modified polymers were smaller than those of fluorocarbon analogues. As time passed the contact angle became smaller and smaller. Fluorocarbon analogues were better than hydrocarbon analogues, and longer hydrophobic chains were better than shorter chains, at maintaining the hydrophobic character of the surface.     

High capacity, charge-selective protein uptake by polyelectrolyte brushes

Surface plasmon resonance was used to measure binding of proteins from solution to poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes end-grafted from gold surfaces by atom transfer radical polymerization (ATRP). PDMAEMA brushes were prepared with a variety of grafting densities and degrees of polymerization. These brushes displayed charge selective protein uptake. The extent of uptake for net negatively charged bovine serum albumin (BSA) scaled linearly with the surface mass concentration of grafted PDMAEMA, regardless of grafting density. BSA was bound at a constant ratio of 120 DMAEMA monomer units per protein molecule for all brushes examined. The equivalent three-dimensional concentration of BSA bound in the brush (i.e., the bound BSA surface excess concentration divided by the brush thickness) decreased monotonically with decreasing grafting density. The concentration of BSA bound within brushes prepared at higher grafting densities was comparable with the aqueous protein solubility limit. BSA desorption from the brush required changes in solution pH and/or ionic strength to eliminate its net electrostatic attraction to PDMAEMA. Net positively charged lysozyme was completely rejected by the PDMAEMA brushes.     

Self-assembly of stimuli-responsive water-soluble [60]fullerene end-capped ampholytic block copolymer

A well-defined, water-soluble, pH and temperature stimuli-responsive [60]fullerene (C(60)) containing ampholytic block copolymer of poly((methacrylic acid)-block-(2-(dimethylamino)ethyl methacrylate))-block-C(60) (P(MAA-b-DMAEMA)-b-C(60)) was synthesized by the atom transfer radical polymerization (ATRP) technique. The self-assembly behavior of the C(60) containing polyampholyte in aqueous solution was characterized by potentiometric and conductometric titration, dynamic light scattering (DLS), and transmission electron microscopy. This amphiphilic mono-C(60) end-capped block copolymer shows enhanced solubility in aqueous medium at room and elevated temperatures and at low and high pH but phase separates at intermediate pH between 5.4 and 8.8. The self-assembly of the copolymer is different from that of P(MAA-b-DMAEMA). Examination of the association behavior using DLS revealed the coexistence of unimers and aggregates at low pH at all temperatures studied, with the association being driven by the balance of hydrophobic and electrostatic interactions. Unimers and aggregates of different microstructures are also observed at high pH and at temperatures below the lower critical solution temperature (LCST) of PDMAEMA. At high pH and at temperatures above the LCST of PDMAEMA, the formation of micelles and aggregates coexisting in solution is driven by the combination of hydrophobic, electrostatic, and charge-transfer interactions.     

Poly(2-(dimethylamino)ethyl methacrylate)-b-poly(hydroxypropyl methacrylate) copolymers/bovine serum albumin complexes in aqueous solutions

Complexation ability of poly(2-(dimethylamino)ethyl methacrylate)-b-poly(hydroxy propyl methacrylate) (PDMAEMA-b-PHPMA) amphiphilic doubly thermo-responsive block copolymers, and their quaternized counterparts QPDMAEMA-b-PHPMA, toward bovine serum albumin (BSA) is studied in aqueous solutions. The PDMAEMA-b-PHPMA amphiphilic block copolymers self-assemble in nanostructured aggregates with PDMAEMA coronas having different inner structure and micro-polarity depending on the solubilization protocol utilized when inserted in aqueous media. By incorporating different BSA concentrations, we investigate the copolymer–protein interactions by light scattering measurements in aqueous solutions in a broad temperature range, utilizing different solubilization protocols for the copolymers. Fluorescence spectroscopy and ζ-potential measurements were also utilized to investigate the structure and properties of the copolymer/protein complexes formed in each case. Such knowledge may lead to a better understanding of the inner structure and micro polarity of the nanostructured aggregates formed by the novel (Q)PDMAEMA-b-PHPMA copolymers, along with their potential abilities in nanocarrier formation, protein complexation, stabilization, and delivery.     

Structure of a hydrophilic-hydrophobic block copolymer and its interactions with salt and an anionic surfactant

The aggregation of a hydrophilic-hydrophobic diblock copolymer consisting of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) and poly(methyl methacrylate) (PMMA) in aqueous solution has been investigated by small-angle neutron scattering. This polybase is extensively protonated at low pH and forms micelles with a dense core of PMMA and a diffuse coronal layer of cationic PDMAEMA. Addition of salt induced micellar growth, brought about by charge screening and more efficient packing of the chains. As a result, the aggregation number increased from 8 up to 31. A similar effect was observed at low concentrations of an anionic surfactant, sodium dodecyl sulfate (SDS) since the net cationic charge in the hydrophilic coronal layer was reduced due to surfactant binding. However, at higher surfactant concentrations, a drastic structural reorganization occurred, as the PMMA became solubilized into the SDS micellar cores and the PDMAEMA chains interacted with the surfactant micelles, resulting in a "pearl-necklace" structure. The presence of the cationic polyelectrolyte significantly increased the population of SDS micelles by effectively lowering the critical micelle concentration of this anionic surfactant.     

Synthesis and swelling behavior of pH-responsive polybase brushes

We synthesize polybase brushes and investigate their swelling behavior. Poly(2-(dimethylamino)ethyl methacrylate)) (PDMAEMA) brushes are prepared by the "grafting from" method using surface-initiated Atom Transfer Radical Polymerization to obtain dense brushes with relatively monodisperse chains (PDI = 1.35). In situ quaternization reaction can be performed to obtain poly(2-(trimethylamino)ethyl methacrylate)) (PTMAEMA) brushes. We determine the swollen thickness of the brushes using ellipsometry and neutron reflectivity techniques. Brushes are submitted to different solvent conditions to be investigated as neutral brushes and weak and strong polyelectrolyte brushes. The swelling of the brushes is systematically compared to scaling models. It should be pointed out that the scaling analysis of different types of brushes (neutral polymer and weak and strong polyelectrolyte brushes) is performed with identical samples. The scaling behavior of the PDMAEMA brush in methanol and the PTMAEMA brush in water is in good agreement with the predicted scaling laws for a neutral polymer brush in a good solvent and a polyelectrolyte brush in the osmotic regime. The salt-induced contraction of the quaternized brush is observed for high salt concentration, in agreement with the predicted transition between the regimes of the osmotic brush and the salted brush. From the crossover concentration, we calculate the effective charge ratio of the brush following the Manning counterion condensation. We also use PDMAEMA brushes as pH-responsive polybase brushes. The swelling behavior of the polybase brush is intermediate with respect to the behavior of the neutral polymer brush in a good solvent and the behavior of the quenched polyelectrolyte brush, as expected. The effective charge ratio of the PDMAEMA brush is determined as a function of pH using the scaling law of the polyelectrolyte brush in the osmotic regime.     

pH-induced micelle formation of poly(histidine-co-phenylalanine)-block-poly(ethylene glycol) in aqueous media

Poly[(L-histidine)-co-(L-phenylalanine)]-block-poly(ethylene glycol) (HF-b-PEG) diblock copolymers were synthesized to be used for preparation of pH-sensitive polymeric micelles. First, HF block was synthesized by ring opening copolymerization of L-histidine and L-phenylalanine N-carboxyanhydride, and then the resulting copolymer was coupled with PEG. The pKa value of diblock copolymer can be controlled by adjusting the histidine/phenylalanine ratio in HF block. It is observed that the block copolymers form micelles in aqueous media and that the micelles are spherical in shape with a unimodal distribution. The micelle is formed at pH higher than pKa of block copolymer while it is not formed at lower pH. This is because the protonation of histidine residue in the HF block converts the hydrophobic core into hydrophilic one at lower pH. Acid-Base titration profile of HF41(5600)-b-PEG, HF56(5500)-b-PEG, H(5100)-b-PEG and 0.1 N NaCl.     

Synthesis and nanostructure of strong polyelectrolyte brushes in amphiphilic diblock copolymer monolayers on a water surface

We synthesized an ionic amphiphilic diblock copolymer, poly(hydrogenated isoprene)-b-poly(styrenesulfonic acid) (PIp-h2-b-PSS), by living anionic polymerization, and the nanostructure of its monolayer spread on a water surface was directly investigated by the in situ X-ray reflectivity technique. The monolayer of the diblock copolymer on a water surface had a smooth hydrophobic PIp-h2 layer on water and a "carpet"/polymer brush double layer in a hydrophilic sodium polystyrene sulfonate (PSSNa) layer under the water. The surface pressure dependence and PSSNa chain length dependence of the PIp-h2 layer thickness and the brush nanostructure were quantitatively studied. The effect of salt concentration in the subphase was also investigated in aqueous solutions containing 0-2 M NaCl. The salt effect on monolayer structure occurred at around 0.2 M. The thickness of the PSS brush layer decreased at salt concentrations above 0.2 M, while no structural change was observed below 0.2 M. This critical salt concentration is thought to be related to the balance of ionic concentrations inside the brush and in bulk solution.     

Synthesis and characterization of novel brush copolymers with biodegradable polyphosphoester side chains for gene delivery

A novel kind of pH‐sensitive brush copolymer [poly(2‐hydroxyethyl methacrylate)‐graft‐poly(ethylethylene phosphate)]‐block‐poly[2‐(dimethylamino)ethyl methacrylate] [(PHEMA‐g‐PEEP)‐b‐PDMAEMA] with biodegradable polyphosphoester as the side chains, and its self‐assembled aggregates were developed for nonviral gene delivery. The brush copolymers were synthesized via a combination of single‐electron transfer living radical polymerization and ring‐opening polymerization. The chemical structures of these brush copolymers were characterized by FTIR, ¹H NMR, and ³¹P NMR measurements. The critical aggregation concentration values of (PHEMA‐g‐PEEP)‐b‐PDMAEMA in pH 7.4 buffer solution were determined by the fluorescence probe technique. The interaction of (PHEMA‐g‐PEEP)‐b‐PDMAEMA and DNA was studied by agarose gel retardation assay, and the formed complexes were further investigated by means of zeta potential, dynamic light scattering, and transmission electron microscopy measurements. In addition, the in vitro cytotoxicity and transfection tests indicated that these brush copolymers showed low toxicity and favorable transfection efficiency to HeLa cells. All these results demonstrated that these biocompatible brush copolymers may be a promising candidate as nonviral polymeric gene vector. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

PDEA和P(DEA-co-NHMAA)稀水溶液相分离行为研究

运用紫外-可见分光光度法分别考察了聚N,N-二乙基丙烯酰胺(PDEA)和N-羟甲基丙烯酰胺(NHMAA)与DEA的共聚物P(DEA-co-NHMAA)稀水溶液相分离行为. 结果发现，当P(DEA-co-NHMAA)中NHMAA的质量分数小于5.25%时, 随着NHMAA含量的增加， 其最低临界溶解温度(TLCS)下降；当NHMAA的含量大于5.25%时，随着NHMAA含量的增加，其TLCS上升；与PDEA相比P(DEA-co-NHMAA)相分离行为的浓度依赖性减弱；PDEA和P(DEA-co-NHMAA)从无规线团(coil)到蜷曲球(globular)的突然转变与从globular到coil的逐渐转变机理不同. 据此提出了P(DEA-co-NHMAA)在稀水溶液中相变的分子机理.     

Biomimetic Approach to the Formation of Titanium Dioxide Thin Films by Using Poly(2‐(dimethylamino)ethyl methacrylate)

We demonstrate that the biomimetic method—which has been used for the formation of silica thin films—also could be applied directly to the formation of titanium dioxide (TiO₂) thin films, which are technologically important materials because of their applications to photocatalytic purifiers, photochemical solar cells, and others. After generation of poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) films on gold surfaces by surface‐initiated polymerization, titanium bis(ammonium lactato)dihydroxide was used as a precursor of TiO₂. The TiO₂/PDMAEMA films were successfully formed on the surfaces in aqueous solution at neutral pH (pH 6.7) and room temperature, and were characterized by X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, atomic force microscopy, scanning electron microscopy, and X‐ray diffractometry. The formed TiO₂ films have an amorphous nature and large area uniformity in thickness. The degree of crystallization was controlled by annealing. We also investigated the pH effect and the phosphate incorporation in the films by using phosphate‐buffered solutions. The TiO₂ films were formed in all the employed pH values in the range of 2 to 12, but phosphate anions were found to be incorporated into the films facilely only at low pH.     

Poly(dimethylaminoethyl methacrylate)‐b‐poly(hydroxypropyl methacrylate) copolymers: Synthesis and pH/thermo‐responsive behavior in aqueous solutions

The synthesis and self‐assembly properties in aqueous solutions of novel amphiphilic block copolymers composed of one hydrophilic, pH and temperature responsive poly(dimethyl amino ethyl methacrylate) (PDMAEMA) block and one weakly hydrophobic, water insoluble, potentially thermoresponsive poly(hydroxy propyl methacrylate) (PHPMA) block, are reported. The block copolymers were prepared by RAFT polymerization and were molecularly characterized by size exclusion chromatography, NMR, and FTIR spectroscopies. The PDMAEMA‐b‐PHPMA amphiphilic block copolymers self‐assemble in different nanostructured aggregates when inserted in aqueous media. The effects of different solubilization protocols, as well as the effects of solution temperature and pH on the structure of the aggregates, are studied by light scattering and fluorescence spectroscopy measurements. Experimental results indicate that there is a number of solution preparation and physicochemical parameters that allow the control and manipulation of the structure and thermoresponsive properties of PDMAEMA‐b‐PHPMA aggregates in aqueous media. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1962–1977     

Adhesion of polyether-modified poly(acrylic acid) to mucin

Pluronic-PAA, a thermogelling copolymer composed of side chains of poly(acrylic acid) (PAA) grafted onto a backbone of Pluronic copolymer, is of interest as a vehicle for the controlled release of compounds. An important feature of such a vehicle is its bioadhesive/mucoadhesive properties, which in the case of Pluronic-PAA are significant due to the presence of the PAA side chains. An atomic force microscopy (AFM) method has been developed and utilized to investigate the interactions between a Pluronic-PAA-modified microsphere and mucous substrates. The bioadhesive force was successfully measured, and trends were observed under conditions of varying pH and ionic strength. Pluronic-PAA exhibits significant mucoadhesion over a range of pH values, with mucoadhesion being optimal at pH 4-5 (adhesive force approximately 80 mN/cm(2)) and dropping sharply at higher pH, to a value of approximately 20 mN/cm(2) at pH 8. The mucoadhesive force decreased with increasing ionic strength, from a value of approximately 80 mN/cm(2) in 0.025 M NaCl to approximately 25 mN/cm(2) in 1.0 M NaCl. These results have been interpreted in terms of the effect of changing pH and ionic strength on electrostatic interactions and swelling of the polymer and mucin layers. Tensiometric force measurements indicated that hydrophobic interactions, as well as hydrogen bonding and electrostatic interactions, were significant in the mucoadhesion of Pluronic-PAA copolymers. Experiments with a range of Pluronic-PAA copolymers with varying PPO contents in the Pluronic segments showed that increasing the overall PPO content increased the hydrophobicity of the polymer solutions. This was reflected in the increases in the advancing contact angles with the mucin layer, indicating that hydrophobic interactions play a role in the adhesion of Pluronic-PAA to mucin.     

Synthesis of PS and PDMAEMA mixed polymer brushes on the surface of layered silicate and their application in pickering suspension polymerization

An ammonium free radical initiator was ion exchanged onto the surface of clay layers. Polystyrene (PS) and poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) mixed polymer brushes on the surface of clay layers were prepared by in situ free radical polymerization. PS colloid particles armored by clay layers with mixed polymer brushes were prepared by Pickering suspension polymerization. Transmission electron microscopy (TEM), atomic force microscopy (AFM), and scanning electron microscopy (SEM) were used to characterize the structure and morphology of the colloid particles. Clay layers on the surface of PS colloid particles can be observed. Because of the cationic nature of the PDMAEMA brushes the colloid particles have positive zeta potentials at low pH values. X‐ray photoelectron spectroscopy (XPS) was used to analyze the surface of the colloid particles. N_1s binding energy of PDMAEMA chains on the surface of clay layers was detected by XPS. The two peaks of the N_1s binding energy indicate two different nitrogen environments on the surface of clay layers. The peak with a lower binding energy is characteristic of neutral nitrogen on PDMAEMA chains, and the peak with a higher binding energy is attributed to protonated nitrogen on PDMAEMA chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5759–5769, 2007     

A pH- and temperature-sensitive macrocyclic graft copolymer composed of PEO ring and multi-poly(2-(dimethylamino) ethyl methacrylate) lateral chains

A novel method for the synthesis of macrocyclic graft copolymers was developed through combination of anionic ring-opening polymerization (AROP) and atom transfer radical polymerization (ATRP). A linear α,ω-dihydroxyl poly(ethylene oxide) with pendant acetal protected hydroxyl groups (l-poly(EO-co-EEGE)) was prepared first by the anionic copolymerization of ethylene oxide (EO) and ethoxyethyl glycidyl ether (EEGE). Then l-poly(EO-co-EEGE) was cyclized. The crude cyclized product containing the linear byproduct was hydrolyzed and purified by being treated with α-CD. The pure cyclic copolymer [c-poly(EO-co-Gly)] was esterified by reaction with 2-bromoisobutyryl bromide, and then used as ATRP macroinitiators to initiate polymerization of 2-(dimethylamino) ethyl methacrylate (DMAEMA), and a series of pH- and temperature-sensitive macrocyclic graft copolymers composed of a hydrophilic PEO as the ring and PDMAEMA as side chains (c-PEO-g-PDMAEMA) were obtained. The behavior of pH- and temperature-sensitive macrocyclic copolymers was studied in aqueous solution by fluorescence and dynamic light scattering (DLS). The critical micellization pH values of macrocyclic graft copolymers and their corresponding linear graft copolymers (l-PEO-g-PDMAEMA) were measured. Under the same conditions, the cyclic graft copolymer with the shorter side chains gave the higher critical micellization pH value. The c-PEO-g-PDMAEMA showed the lower critical micellization pH value than the corresponding l-PEO-g-PDMAEMA. The average hydrodynamic diameters (D _h) of the micelles were measured by DLS with the variation of the aqueous solution pH value and temperature.     

Synthesis,pH‐ and temperature‐induced micellization and gelation of doubly hydrophilic triblock copolymer of poly(N,N‐dimethylamino‐2‐ethylmethacrylate)‐b‐poly(ethylene glycol)‐b‐poly(N,N‐dimethylamino‐2‐ethylmethacrylate) in aqueous solutions

A doubly hydrophilic triblock copolymer of poly(N,N‐dimethylamino‐2‐ethyl methacrylate)‐b‐Poly(ethylene glycol)‐b‐poly(N,N‐dimethylamino‐2‐ethylmethacrylate) (PDMAEMA‐b‐PEG‐b‐PDMAEMA) with well‐defined structure and narrow molecular weight distribution (M_w/M_n = 1.21) was synthesized in aqueous medium via atom transfer radical polymerization (ATRP) of N,N‐dimethylamino‐2‐ethylmethacrylate (DMAEMA) initiated by the PEG macroinitiator. The macroinitiator and triblock copolymer were characterized with ¹H NMR and gel permeation chromatography (GPC). Fluorescence spectroscopy, dynamic light scattering (DSL), transmittance measurement, and rheological characterization were applied to investigate pH‐ and temperature‐induced micellization in the dilute solution of 1 mg/mL when pH > 13 and gelation in the concentrated solution of 25 wt % at pH = 14 and temperatures beyond 80 °C. The unimer of R_h = 3.7 ± 0.8 nm coexisted with micelle of R_h = 45.6 ± 6.5 nm at pH 14. Phase separation occurred in dilute aqueous solution of the triblock copolymer of 1 mg/mL at about 50 °C. Large aggregates with R_h = 300–450 nm were formed after phase separation, which became even larger as R_h = 750–1000 nm with increasing temperature. The gelation temperature determined by rheology measurement was about 80 °C at pH 14 for the 25 wt % aqueous solution of the triblock copolymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5869–5878, 2008     

Synthesis and Self‐Assembly of pH‐Responsive Amphiphilic Poly(dimethylaminoethyl methacrylate)‐block‐Poly(pentafluorostyrene) Block Copolymer in Aqueous Solution

We report the synthesis of a novel pH‐responsive amphiphilic block copolymer poly(dimethylaminoethyl methacrylate)‐block‐poly(pentafluorostyrene) (PDMAEMA‐b‐PPFS) using RAFT‐mediated living radical polymerization. Copolymer micelle formation, in aqueous solution, was investigated using fluorescence spectroscopy, static and dynamic light scattering (SLS and DLS), and transmission electron microscopy (TEM). DLS and SLS measurements revealed that the diblock copolymers form spherical micelles with large aggregation numbers, N_agg ≈ 30 where the dense PPFS core is surrounded by dangling PDMAEMA chains as the micelle corona. The hydrodynamic radii, R_h of these micelles is large, at pH 2–5 as the protonated PDMAEMA segments swell the micelle corona. Above pH 5, the PDMAEMA segments are gradually deprotonated, resulting in a lower osmotic pressure and enhanced hydrophobicity within the micelle, thus decreasing the R_h. However, the radius of gyration, R_g remains independent of pH as the dense PPFS cores predominate.