3-(3＇-羟基丁基)异苯并呋喃-1(3H)-酮的合成

由邻苯二甲酸酐为原料,经中间体3-羟基苯酞(3),再经溴丙烯及锡存在下3的烯丙基化、硼氢化氧化、铬酐氧化、二甲基锌甲基化,共6步反应合成了3-(3＇-羟基丁基)异苯并呋喃-1(3H)-酮.     

3-亚甲基六氢苯并呋喃-2(3H)-酮的简便合成

以氧化环己烯为原料,在正丁基锂作用下与乙腈经开环反应制得2-羟基环己基乙腈(2);2依次经水解、内酯化、二甲胺甲基化、甲基化和Hofmann降解反应合成了α-亚甲基-γ-丁内酯类化合物--3-亚甲基六氢苯并呋喃-2(3H)-酮,总收率30.4%,其结构经¹H NMR,¹³C NMR和HR-MS(EI)确证。     

(3S,4S)-4-氨基-3-羟基-6-甲基庚酸的合成

价廉易得的L-亮氨酸先以苄基同时保护氨基及羧基得(S)-2-(二苄胺基)-4-甲基戊酸苄酯,进而在碱性条件下与乙腈发生亲核取代反应得(S)-4-(二苄胺基)-6-甲基-3-氧代庚腈,再经硼氢化钠选择性还原羰基得(3S,4S)-4-(二苄胺基)-3-羟基-6-甲基庚腈,用双氧水氧化得(3S,4S)-4-(二苄胺基)-3-羟基-6-甲基庚酸,最后在Pd(OH)2/C-H2作用下脱掉苄基得到(3S,4S)-4-氨基-3-羟基-6-甲基庚酸,即(3S,4S)-statine。整个合成路线总产率为33.6%。     

3-亚甲基异苯并呋喃-1(3H)-酮的合成

以邻甲基苯甲酸甲酯为原料,经过自由基溴代,Wittig反应,酯水解反应,得到邻乙烯基苯甲酸;随后发生环氧化反应,环合反应得到3-羟甲基异苯并呋喃-1(3H)-酮;再发生亲核取代和消除反应合成了3-亚甲基异苯并呋喃-1(3H)-酮。目标产物在空气中长期放置没有发生二聚。化合物结构用1H NMR、13C NMR和IR表征。     

(3-羟基丁酸-3-羟基戊酸)共聚物异相成核结晶行为

(3-羟基丁酸-3-羟基戊酸)共聚物异相成核结晶行为;(羟基丁酸羟基戊酸)共聚物;成核剂;结晶速率     

氟烷基磺酰氟和(2S,3R)-2,3-二羟基-3-苯基丙酸甲酯的脱水环氧化反应的研究

考察了(2S,3R)-2,3-二羟基-3-苯基丙酸甲酯和几种常用的氟烷基磺酰氟试剂在有机碱存在下的脱水环氧化反应.实验结果表明,氟烷基磺酰氟能够诱导(2S,3R)-2,3-二羟基-3-苯基丙酸甲酯发生脱水环氧化反应而生成(2R,3R)-2,3-环氧-3-苯基丙酸甲酯,得率80%～92%,且产物的不对映过量(ee)值大于97%.该方法具有工业化应用前景.     

2,2-二(4-羟基-3-氨基)苯基丙烷的合成

在乙醇介质中,以Fe(OH)3／C为催化剂,用80％水合肼将2,2-二(4-羟基-3-硝基)苯基丙烷还原为2,2-二(4-羟基-3-氨基)苯基丙烷。产率99．0％,纯度98．5％。考察了10种金属离子对催化剂活性的影响,结果发现Pb^2 会引起催化剂中毒;Mg^2 ,Cu^2 和Zn^2 钝化了催化剂的催化活性;Ba^2 和Cr^3 不影响催化剂的活性;Al^3 ,Ni^2 ,Ti^3 和Ti^4 能活化催化剂,使反应速度加快,但它们单独使用时无催化活性。     

(3S)-2,2-二甲基-3-苄氧基癸酸的合成

以 (R) pantolactone为原料 ,经还原、羟基保护、环合、开环、脱保护、氧化等 8步反应 ,合成了 (3S) 2 ,2 二甲基 3 苄氧基癸酸 ,总收率为 40 0 % .     

三(3-羟基黄酮)合铝(Ⅲ)的合成及晶体结构

合成了三(3-羟基黄酮)合铝(Ⅲ),制得[Al(C₁₅H₉O₃)₃]₂·2CHCl₃·8H₂O晶体,X射线衍射结果表明:其结构属于三方晶系,空间群为R3.晶胞参数:a=b=1.6558(3)nm,c=3.6465(20)nm,α=β=90°,γ=120°,V=8.65608(0.00586)nm₃,D_c=1.45g/cm³,μ(MoKα)=3.20cm^-1,F(000)=3924.分子中每个3-羟基黄酮以其独特的酮基和羟基同时与Al³⁺配位,3个配体中的6个配位氧原子形成扭曲的配位八面体.     

(±)-3-正丁基-4-甲氧基苯酞的合成

以3-羟基苯甲酸为原料,通过中间体(±)-3-羟基-4-甲氧基苯酞合成了(±)-3-正丁基-4-甲氧基苯酞(?)。     

3-(Carbazol-2-yl)- and 3-(Carbazol-3-yl)-dl-alanines

A facile transformation of 2- and 3-methylcarbazoles into 3-(carbazol-2-yl)-and 3-(carbazol-3-yl)-dl-alanines compounds is described.     

Preparation,molecular structures,and characteristic properties of (E)-1-(2-furyl)- and (E)-1-(2-thienyl)-2-(3-guaiazulenyl)ethylenes and (E)-1-(3-furyl)- and (E)-1-(3-thienyl)-2-(3-guaiazulenyl)ethylenes

Wittig reactions of 2-furaldehyde (20) [and thiophene-2-carbaldehyde (21)] with (3-guaiazulenylmethyl)triphenylphosphonium bromide (19) in ethanol containing NaOEt at 25 °C for 24 h under argon give (E)-1-(2-furyl)-2-(3-guaiazulenyl)ethylene (22E) and (E)-1-(2-thienyl)-2-(3-guaiazulenyl)ethylene (23E) in 53 and 36% yields. Similarly, Wittig reactions of 3-furaldehyde (29) [and thiophene-3-carbaldehyde (30)] with 19 under the same reaction conditions as for 20 and 21 afford (E)-1-(3-furyl)-2-(3-guaiazulenyl)ethylene (31E) and (E)-1-(3-thienyl)-2-(3-guaiazulenyl)ethylene (32E) in 32 and 46% yields. Molecular structures and characteristic properties as well as preparation of the title E (i.e., one of the geometrical isomers) forms, with a view to comparative study, are reported. Moreover, reactions of those conjugated π-electron systems with TCNE (=tetracyanoethylene) in benzene [and in DMF (=N,N-dimethylformamide)] at 25 °C for 24 h under argon yield unique products, possessing interesting molecular structures, respectively, whose characteristic properties and crystal structures are documented, also.     

Stereoselective synthesis of (S)-3-(methylamino)-3-((R)-pyrrolidin-3-yl)propanenitrile

(S)-3-(methylamino)-3-((R)-pyrrolidin-3-yl)propanenitrile (1) is a key intermediate in the preparation of PF-00951966, (1) a fluoroquinolone antibiotic for use against key pathogens causing community-acquired respiratory tract infections including multidrug resistant (MDR) organisms. The current work describes the development of a highly efficient and stereoselective synthesis of 1 in 10 steps with an overall yield of 24% from readily available benzyloxyacetyl chloride. Two key transformations in the synthetic sequence involve (a) catalytic asymmetric hydrogenation with chiral DM-SEGPHOS-Ru(II) complex to afford β-hydroxy amide 11b in good yield (73%) and high stereoselectivity (de 98%, ee >99%) after recrystallization and (b) S(N)2 substitution reaction with methylamine to provide diamine 14 with inversion of configuration at the 1'-position in high yield (80%), after efficient purification using a simple acid/base extraction protocol.     

2-(Acylmethylmercapto)-3-amino- and 2-(acylmethylmercapto)-3-acetamidopyridines

The reaction of 2-mercapto-3-acetamido-5-(or 6-)chloropyridines with phenacyl bromide and substituted phenacyl bromides yielded 2-(phenacylmercapto)-3-acetamidopyridines, while the reaction of the former with -chloroacetoacetic ester yielded 2-(carbethoxyacyl-methylmercapto)-3-acetamidopyridlnes.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1391–1394, October, 1971.     

3-(2-Quinolyl)- and 3-(5-carbethoxyfuryl-2)coumarins

3-(2-Quinolyl)- and 3-(5-carbethoxyfuryl-2)coumarins were prepared by reaction of substituted salicylaldehydes and hetarylacetonitriles. Alkylation and acylation of 3-hetaryl-7-hydroxycoumarins were studied. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 432–434, September–October, 2005.