Investigation on threshold power of stimulated Brillouin scattering in photonic crystal fiber

We have developed a theoretical approach to simulate stimulated Brillouin scattering (SBS) generation in photonic crystal fiber (PCF). The threshold condition for the SBS occurrence has been derived as a function of fiber parameters and input pump power. A particular emphasis is given to the influence of the input pump power and fiber length on the Brillouin gain in the PCF. To assess threshold pump power accurately, the pump depletion effect has been included by employing the 1% criterion. This simulation can anticipate the Brillouin threshold gain value precisely. The threshold gain varies from 14 to 18 depending on the PCF length.     

On the pre-amplified linear cavity multi-wavelength Brillioun-erbium fiber laser with low SBS threshold highly nonlinear photonic crystal fiber

An efficient multi-wavelength Brillouin-erbium fiber laser utilizing low stimulated Brillouin scattering threshold highly nonlinear photonic crystal fiber (PCF) is presented. A Fabry-Perot pre-amplified Brillouin pump configuration was used which consists of 100 m PCF and 10 m erbium doped fiber (EDF). Up to 28 output channels with SNR of more than 20 dB could be generated with modest pump power.     

基于光子晶体光纤中受激布里渊散射的光载波抑制

设计了一种基于光子晶体光纤中受激布里渊散射的载波滤波器.该滤波器利用两个环形器和一段光子晶体光纤构成了一个环形腔,这种腔结构有效地降低了光纤中受激布里渊散射的阈值.理论分析了光子晶体光纤载波滤波器对提高光调制深度和射频增益的影响.利用25 m的高非线性光子晶体光纤作为受激布里渊增益介质,当入射载波功率为70 mW时,微波光子信号的射频增益为5.38 dB,实验结果与理论计算相吻合.     

Tunable multiwavelength Brillouin-erbium ring-cavity fiber laser with short-length photonic crystal fiber

A multi-wavelength Brillouin-erbium ring-cavity fiber laser utilizing 2-m erbium doped fiber (EDF) and 70-m high nonlinear photonic crystal fiber (PCF) is proposed and demonstrated. The output characteristics and also the impacts of pump and Brillouin pump (BP) on the output spectra are investigated in detail. The output number and wavelength location of Brillouin lines are tunable by adjusting the power of 1465 nm pump and BP, and a 5-channel output within 11 nm (1551–1562 nm) tuning range is achieved by choosing appropriate pump power.     

An Efficient Photonic Crystal Fiber-Based Brillouin Erbium Fiber Laser Using a Fiber Bragg Grating for Multi-Wavelength Generation

Abstract

An efficient multi-wavelength Brillouin erbium fiber laser is demonstrated using an improved configuration with a broadband fiber Bragg grating and a piece of photonic crystal fiber. The laser generates more than 55 lines of optical comb with a line spacing of approximately 0.09 nm in a 1,565-5 nm region using pump powers of 3 dBm and 150 mW for the Brillouin and 980-nm pumps, respectively. The Brillouin erbium fiber laser with a fiber Bragg grating's reflectivity of 50% obtained a higher number of comb lines compared to that of 99% reflectivity.     

Simple tunable multiwavelength Brillouin/Erbium fiber laser utilizing short-length photonic crystal fiber

We have demonstrated a simple ring cavity tunable multiwavelength Brillouin/Erbium fiber laser (MWBEFL), in which 70 m highly nonlinear photonic crystal fiber (HNL-PCF) is used as the Brillouin gain medium. The fiber laser utilizes recycling mechanism to enhance stimulated Brillouin scattering (SBS). The configuration that consists of only 3 optical components is easy to be integrated and improves the practicality. At the maximum 1480 nm pump power of 110 mW and the Brillouin pump power of 3 dBm, 10 stable output channels with more than 10 dB optical signal to noise ratio (OSNR) and 0.078 nm channel spacing could achieve 10 nm tuning ranges.     

Multiwavelength L-band fiber laser with bismuth-oxide EDF and photonic crystal fiber

A multiwavelength laser comb using a bismuth-based erbium-doped fiber and 50 m photonic crystal fiber is demonstrated in a ring cavity configuration. The fiber laser is solely pumped by a single 1455 nm Raman pump laser to exploit its higher power delivery compared to that of a single-mode laser diode pump. At 264 mW Raman pump power and 1 mW Brillouin pump power, 38 output channels in the L-band have been realized with an optical signal-to-noise ratio above 15 dB and a Stokes line spacing of 0.08 nm. The laser exhibits a tuning range of 12 nm and produces stable Stokes lines across the tuning range between Brillouin pump wavelengths of 1603 nm and 1615 nm.     

Reduction of guided acoustic wave Brillouin scattering in photonic crystal fibers

Guided acoustic wave Brillouin scattering (GAWBS) generates phase and polarization noise of light propagating in glass fibers. This excess noise affects the performance of various experiments operating at the quantum noise limit. We experimentally demonstrate the reduction of GAWBS noise in a photonic crystal fiber in a broad frequency range by tailoring the acoustic modes using the photonic also as a phononic crystal. We compare the noise spectrum to the one of a standard fiber and observe a tenfold noise reduction in the frequency range up to 200 MHz. Based on our measurement results as well as on numerical simulations, we establish a model for the reduction of GAWBS noise in photonic crystal fibers.     

Threshold features of a Brillouin Stokes comb generated in a distributed fiber Raman amplifier

We study threshold features of a Brillouin-shifted Stokes comb generated in a distributed fiber Raman amplifier. When the input power of Brillouin pump is linearly increased in high Raman gain, the first Stokes wave grows exponentially at much lower threshold power and then experiences an appreciable power decrease in the vicinity of the Brillouin comb's threshold. This power reduction of the first Brillouin Stokes, which we did not see mentioned in previous reports, was caused by a power transfer to higher-order lines and initiated Brillouin comb generation. Moreover, the effects of Raman pump power and pumping direction on the threshold of a Brillouin comb are investigated.     

Photonic crystal fibre Brillouin laser based on Bragg grating Fabry-Perot cavity

A photonic crystal fibre Brillouin laser based on fibre Bragg grating Fabr-Perot cavity is presented. A highly nonlinear photonic crystal fibre 25 m in length is used as Brillouin gain medium and fibre Bragg grating Fabry-Perot cavity is chosen in order to enhance the laser conversion efficiency and suppress the higher-order Stokes waves. The laser reaches the threshold at input power of 35 mW, and the experimental laser conversion efficiency achieves 18% of the input power of 140 mW and does not show higher-order Stokes waves. A photonic crystal fibre Brillouin laser with shorter fibre length and lower threshold is experimentally realized.     

光子晶体光纤结构与掺杂对受激布里渊散射快光的影响

由受激布里渊散射三波耦合方程导出了在小信号条件下的快光时间提前量,通过全矢量有限元法模拟了光子晶体光纤占空比和GeO₂掺杂质量分数对布里渊频移、时间提前量、脉冲展宽因子及脉冲形变的影响。结果表明,布里渊频移随着占空比和掺杂质量分数的增大而减小。在保持泵浦功率为20 mW和快光传输长度为10 m的条件下,时间提前量随着占空比的增大而增大,随着掺杂质量分数的增大而减小。脉冲展宽因子与时间提前量变化趋势相反。当占空比为0.8,Ge掺杂质量分数为18%时,能够实现快光时间提前量为29.7 ns,脉冲展宽因子为0.88。布里渊阈值随着占空比的增大而减小,随着掺杂质量分数的增大而增大。     

Double Brillouin frequency spaced multiwavelength Brillouin-erbium fiber laser with 50 nm tuning range

A 50 nm tuning range multiwavelength Brillouin-erbium fiber laser (MWBEFL) with double Brillouin frequency spacing is presented. Two separated gain blocks with symmetrical architecture, consisted by erbium-doped fiber amplifiers (EDFAs) and Brillouin gain media, are used to generate double Brillouin frequency spacing. The wider tuning range is realized by eliminating the self-lasing cavity modes existing in conventional MWBEFLs because of the absence of the physical mirrors at the ends of the linear cavity. The Brillouin pump (BP) is preamplified by the EDFA before entering the single-mode fiber (SMF), which leads to the reduction of threshold power and the generation enhancement of Brillouin Stokes (BS) signals. Four channels with 0.176 nm spacing are achieved at 2 mW BP power and 280 mW 980 nm pump power which can be tuned from 1525 to 1575 nm.     

Slow-light delay enhancement in small-core pure silica photonic crystal fiber based on Brillouin scattering

We demonstrate that we realize large-delay slow light based on stimulated Brillouin scattering in a short length of our fabricated small-core photonic crystal fiber (PCF). The cavity effect from the partially reflective splices in the end of the PCF enhances slow-light delay significantly. Our experiments show that large slow-light delay can be easily realized in a very short length of the PCF with a moderate pump power. Up to a one-half pulse-width delay is achieved in only 50 m of PCF in a single pump segment.     

基于光子晶体光纤四波混频效应的波长转换研究

研究了光子晶体光纤中的四波混频效应及其波长转换.采用长度为25 m的高非线性色散平坦光子晶体光纤,当泵浦功率为19.8 dBm时,得到100 nm的转换带宽和－20 dB的最大转换效率.实验结果表明,当信号功率低于四波混频阈值时,两路不同波长的信号同时输入产生的四波混频效应互不影响.     

Guided acoustic wave Brillouin scattering in photonic crystal fibers

We experimentally investigate guided acoustic wave Brillouin scattering in several photonic crystal fibers by use of the so-called fiber loop mirror technique and show a completely different dynamics with respect to standard all-silica fibers. In addition to the suppression of most acoustic phonons, we show that forward Brillouin scattering in photonic crystal fibers is substantially enhanced only for the fundamental acoustic phonon because of efficient transverse acousto-optic field overlap. The results of our numerical simulations reveal that this high-frequency phonon is indeed trapped within the fiber core by the air-hole microstructure, in good agreement with experimental measurements.     

Self-seeded multiwavelength Brillouin-erbium fiber laser

We propose and demonstrate a self-seeded multiwavelength Brillouin-erbium fiber laser with an internally self-excited Brillouin pump, which is achieved by incorporation of a length of single-mode fiber together with a Sagnac loop mirror into a fiber ring cavity. In this simple scheme the Brillouin pump is self-excited in the fiber ring cavity and then used to seed the Brillouin multiwavelength comb in the single-mode fiber. Stable generation of more than 120 Brillouin Stokes wavelengths with relatively uniform amplitudes is demonstrated with this scheme. It is also shown that such a self-seeded Brillouin laser has good stability and repeatability.     

Stimulated Brillouin scattering by the interaction between different-order optical and acoustical modes in an As2Se3 photonic crystal fiber

Brillouin gain spectra(BGS)in an As2Se3 photonic crystal fiber(PCF)are investigated numerically.The profiles of the BGS are simulated by calculating the characteristics of different-order optical and acoustic waves in the PCFs with different core diameters.For the small-core PCF,there are two peaks in BGS,but there is only one peak for the large-core PCF.We also reveal that in the small-core PCF,the difference of Brillouin frequency shift between the LP01 and LP11 modes is obvious,while it is not obvious in the large-core PCF.The Brillouin threshold increases with the core diameter increasing.     

Power dependence of Brillouin linewidths in a silica fiber

We report the dependence of Brillouin linewidths on the pump power below the threshold of Brillouin lasing in a silica fiber. The Stokes Brillouin shift in a silica fiber is nearly unchanged, and its linewidth decreases with increasing pump power. However, the anti-Stokes Brillouin shift becomes smaller and its linewidth larger with increasing pump power. We explain these experimental results by the distributed fluctuating source model.     

大功率单频多芯光纤放大器中抑制受激布里渊散射的分析

针对多芯光纤完善了描述抽运光、信号光和Stokes信号的速率方程组.考虑了温差对受激布里渊散射的影响,利用有限元法求解温度分布方程组,分析了前向和后向抽运方式、对流系数、Stokes初始功率、光纤掺杂粒子密度和光纤长度对受激布里渊散射增益的影响.研究表明：后向抽运方式在抑制受激布里渊散射方面具有明显优势;减小对流系数有助于抑制受激布里渊散射;提高光纤掺杂密度能够加强抑制受激布里渊散射,同时也有助于提高光纤放大器的斜率效率.比较了在相同最佳光纤长度条件下,单芯和19芯光纤放大器的最高工作温度和受激布里渊散射 关键词： 光纤放大器 受激布里渊散射 大功率 有限元法     

基于石英柱模型的光子晶体光纤异常布里渊散射特性的理论研究

通过石英圆柱模型,理论研究了小芯径光子晶体光纤中混合声波模式的色散、模式耦合以及声光相互作用,理论计算出了布里渊散射增益系数谱的双峰结构及其随抽运光波长和温度的演化规律. 理论分析表明光子晶体光纤中布里渊散射增益系数谱的双峰结构源于小芯径光子晶体光纤中混合声波模式之间的模式耦合. 通过温度改变导致的材料参数变化对声波模式色散特性的影响,特别是声波模式耦合点的移动,解释了双峰结构随外界温度的变化规律. 并且,通过理论计算与实验结果的对比讨论了石英圆柱模型的局限性和适用范围. 关键词： 布里渊散射 声光相互作用 模式耦合 光子晶体光纤