Propagation of an anti-plane moving crack in a functionally graded piezoelectric strip

Summary The propagation of an anti-plane moving crack in a functionally graded piezoelectric strip (FGPS) is studied in this paper. The governing equations for the proposed analysis are solved using Fourier cosine transform. The mixed boundary value problems of the anti-plane moving crack, which is assumed to be either impermeable or permeable, are formulated as dual integral equations. By appropriate transformations, the dual integral equations are reduced to Fredholm integral equations of the second kind. For the impermeable crack, the stress intensity factor (SIF) of the crack in the FGPS depends on both the mechanical and electric loading, whereas, the SIF for the permeable crack depends only on the mechanical loading. The results obtained show that the gradient parameter of the FGPS and the velocity of the crack have significant influence on the dynamic SIF.Support from the Research Grants Council of the Hong Kong Special Administrative Region, China (Project No. HKU 7081/00E) is acknowledged. Support from the National Natural Science Foundation of China (Project No. 10072041) is also acknowledged.     

Griffith crack moving in a piezoelectric strip

Summary  The dynamic problem of an impermeable crack of constant length 2a propagating along a piezoelectric ceramic strip is considered under the action of uniform anti-plane shear stress and uniform electric field. The integral transform technique is employed to reduce the mixed-boundary-value problem to a singular integral equation. For the case of a crack moving in the mid-plane, explicit analytic expressions for the electroelastic field and the field intensity factors are obtained, while for an eccentric crack moving along a piezoelectric strip, numerical results are determined via the Lobatto–Chebyshev collocation method for solving a resulting singular integral equation. The results reveal that the electric-displacement intensity factor is independent of the crack velocity, while other field intensity factors depend on the crack velocity when referred to the moving coordinate system. If the crack velocity vanishes, the present results reduce to those for a stationary crack in a piezoelectric strip. In contrast to the results for a stationary crack, applied stress gives rise to a singular electric field and applied electric field results in a singular stress for a moving crack in a piezoelectric strip. Received 14 August 2001; accepted for publication 24 September 2002 The author is indebted to the AAM Reviewers for their helpful suggestions for improving this paper. The work was supported by the National Natural Science Foundation of China under Grant 70272043.     

A piezoelectric material strip with a crack perpendicular to its boundary surfaces

A cracked piezoelectric material strip under combining mechanical and electrical loads is considered. The crack is vertical to the top and bottom edges of the strip. The edges of the strip are parallel to the x-axis and perpendicular to the z-axis. When a piezoelectric ceramic is poled, it exhibits transversely isotropic behavior. Among many possible poled axis orientations, a particular orientation when the poling direction lies parallel to x-axis is examined in this paper. Both impermeable crack and permeable crack assumptions are considered. Numerical results are included for three kinds of fracture mechanics specimens, namely an edge-cracked strip, a double edge-cracked strip, and a center-cracked strip, subjected to uniform tensions and uniform electric displacement loads simultaneously, at the far ends. In addition, an edge-cracked strip under pure bending and uniform electric displacement loads at the far ends is also investigated in this paper.     

Mode III fracture problem of an arbitrarily oriented crack in an FGPM strip bonded to a homogeneous piezoelectric half plane

This paper studies the Mode III electric-elastic field of a cracked functionally graded piezoelectric strip bonded to a homogeneous piezoelectric half plane. The crack is oriented in arbitrary direction. The material properties of the strip vary along the strip thickness in exponential forms. By using the Fourier transform, the problem can be formulated to a system of singular integral equations and solved by applying the Gauss-Chebyshev integration formula. The effects come from the edge, crack orientations and the nonhomogeneous material parameter on intensity factors are discussed graphically.     

Periodic cracks in a functionally graded piezoelectric layer bonded to a piezoelectric half-plane

Studied is the problem of a periodic array of cracks in a functionally graded piezoelectric strip bonded to a homogeneous piezoelectric material. The properties of the functionally graded piezoelectric strip, such as elastic modulus, piezoelectric constant and dielectric constant, are assumed in exponential forms and vary along the crack direction. The crack surface condition is assumed to be electrically impermeable or permeable. Integral transform and dislocation density functions are employed to reduce the problem to the solution of a system of singular integral equations. The effects of the periodic crack spacing, material constants and the geometry parameters on the stress intensity factor, the energy release ratio and the energy density factor are studied.     

Anti-plane analysis of semi-infinite crack in piezoelectric strip

Using the complex variable function method and the technique of the conformal mapping, the fracture problem of a semi-infinite crack in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load. The analytic solutions of the field intensity factors and the mechanical strain energy release rate are presented under the assumption that the surface of the crack is electrically impermeable. When the height of the strip tends to infinity, the analytic solutions of an infinitely large piezoelectric solid with a semi-infinite crack are obtained. Moreover, the present results can be reduced to the well-known solutions for a purely elastic material in the absence of the electric loading. In addition, numerical examples are given to show the influences of the loaded crack length, the height of the strip, and the applied mechanical/electric loads on the mechanical strain energy release rate.     

Exact solutions of two semi-infinite collinear cracks in piezoelectric strip

Using the complex variable function method and the conformal mapping technique,the fracture problem of two semi-infinite collinear cracks in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load on the partial crack surface.Analytic solutions of the field intensity factors and the mechanical strain energy release rate are derived under the assumption that the surfaces of the crack are electrically impermeable.The results can be reduced to the well-known solutio...     

Moving interfacial crack between piezoelectric ceramic and elastic layers

An analysis is performed for the problem of a finite Griffith crack moving with constant velocity along the interface of a two-layered strip composed of a piezoelectric ceramic and an elastic layers. The combined out-of-plane mechanical and in-plane electrical loads are applied to the strip. Fourier transforms are used to reduce the problem to a pair of dual integral equations, which is then expressed in terms of a Fredholm integral equation of the second kind. The dynamic stress intensity factor(DSIF) is determined, and numerical results show that DSIF depends on the crack length, the ratio of stiffness and thickness, and the magnitude and direction of electrical loads as well as the crack speed. In case that the crack moves along the interface of piezoelectric and elastic half planes, DSIF is independent of the crack speed.     

Transient response of a cracked piezoelectric strip under arbitrary electro-mechanical impact

By using the well-developed integral transform methodology, the dynamic response of stress and electric displacement around a finite crack in an infinite piezoelectric strip are investigated under arbitrary dynamic anti-plane loads. The dynamic stress intensity factors and electric displacement are obtained analytically. It is shown that the dynamic crack-tip stress and electric field still have a square-root singularity. Numerical computations for the dynamic stress intensity factor show that the electric load has a significant influence on the dynamic response of stress field. The higher the ratio of the crack length to the width of the strip, the higher the peak value of the dynamic stress intensity factor is. On the other hand, the dynamic response of the electric field is determined solely by the applied electric load. The electric field will promote or retard the propagation of the crack depending on the time elapse since the application of the external electro-mechanical loads. The project supported by the National Natural Science Foundation of China and the Post-Doctor Science Foundation of China     

Electrical nonlinear anti-plane shear crack in a functionally graded piezoelectric strip

The electrical nonlinear behavior of an anti-plane shear crack in a functionally graded piezoelectric strip is studied by using the strip saturation model within the framework of linear electroelasticity. The analysis is conducted on the electrically unified crack boundary condition with the introduction of the electric crack condition parameter that can describe all the electric crack boundary condition in accordance with the aspect ratio of an ellipsoidal crack and the permittivity inside the crack, in particular, including traditional permeable and impermeable crack boundary conditions. The resulting mixed boundary value problem is analysed and near tip field is obtained by using the integral transform techniques. Numerical results for the normalized five kinds of energy release rates under the small scale electric saturation condition are presented and compared to show the influences of the electric crack condition parameter with the variation of the ellipsoidal crack parameters, electric loads, functionally graded piezoelectric material gradation, crack length, electromechanical coupling coefficient, and crack location. It reveals that there are considerable differences between the results obtained from the traditional electric crack models and those obtained from the current unified crack model.     

Moving eccentric crack in a piezoelectric strip bonded to elastic materials

Summary  The steady-state of a propagation eccentric crack in a piezoelectric ceramic strip bonded between two elastic materials under combined anti-plane mechanical shear and in-plane electrical loadings is considered in this paper. The analysis based on the integral transform approach is conducted on the permeable crack condition. Field intensity factors and energy release rate are obtained in terms of a Fredholm integral equation of the second kind. It is shown for this geometry that the crack propagation speed has influence on the dynamic energy release rate. The initial crack branching angle for a PZT-5H piezoceramic structure is predicted by the maximum energy release rate criterion. Received 23 January 2001; accepted for publication 18 October 2001     

Eccentric crack in a piezoelectric strip bonded to half planes

We consider the problem of determining the singular stresses and electric fields in a piezoelectric ceramic strip containing an eccentric Griffith crack off the centre line bonded to two elastic half planes under anti-plane shear loading using the continuous crack-face condition. Fourier transforms are used to reduce the problem to the solution of two pairs of dual integral equations, which are then expressed to a Fredholm integral equation of the second kind. Numerical values on the stress intensity factor and energy release rate are obtained.     

Crack problems of piezoelectric materials

This paper presents an analysis of crack problems in homogeneous piezoelectrics or on the interfaces between two dissimilar piezoelectric materials based on the continuity of normal electric displacement and electric potential across the crack faces. The explicit analytic solutions are obtained for a single crack in piezoelectrics or on the interfaces of piezoelectric bimaterials. A class of boundary problems involving many cracks is also solved. For homogeneous materials it is found that the normal electric displacementD ₂ induced by the crack is constant along the crack faces which depends only on the applied remote stress field. Within the crack slit, the electric fields induced by the crack are also constant and not affected by the applied electric field. For the bimaterials with realH, the normal electric displacementD ₂ is constant along the crack faces and electric fieldE ₂ has the singularity ahead of the crack tip and a jump across the interface. The project is supported by the National Natural Science Foundation of China(No. 19704100) and the Natural Science Foundation of Chinese Academy of Sciences(No. KJ951-1-201).     

A penny-shaped interface crack between a functionally graded piezoelectric layer and a homogeneous piezoelectric layer

The problem of a penny-shaped interface crack between a functionally graded piezoelectric layer and a homogeneous piezoelectric layer is investigated. The surfaces of the composite structure are subjected to both mechanical and electrical loads. The crack surfaces are assumed to be electrically impermeable. Integral transform method is employed to reduce the problem to a Fredholm integral equation of the second kind. The stress intensity factor, electric displacement intensity factor and energy release rate are derived, some typical numerical results are plotted graphically. The effects of electrical loads, material nonhomogeneity and crack configuration on the fracture behaviors of the cracked composite structure are analyzed in detail.     

Transient dynamic response of a coated piezoelectric strip with a vertical crack

In this study, the dynamic response of a coated piezoelectric strip containing a crack vertical to the interfaces under normal impact load is considered. Based on the superposition principle and the integral transform techniques, the solution in the Laplace transformed plane is obtained in terms of a singular integral equation. The order of stress singularity around the tip of the terminated crack is also obtained. The singular integral equation is solved by using the Gauss–Jacobi integration formula, and the numerical Laplace inversion is then carried out to obtain the resulting dynamic stress and electric displacement intensities. The effects of the material properties and the geometric parameters on the dynamic stress intensity factor and the dynamic energy density factors are shown graphically.     

Functionally graded piezoelectric strip with a penny-shaped crack under electromechanical loadings

In this paper, the mixed-mode penny-shaped crack problem for a functionally graded piezoelectric material (FGPM) strip is considered. It is assumed that the electroelastic properties of the strip vary continuously along the thickness of the strip, and that the strip is under in-plane electromechanical loadings. The problem is formulated in terms of a system of singular integral equations. The stress and electric displacement intensity factors are presented for various values of dimensionless parameters representing the crack size, the crack location, and the material nonhomogeneity.     

Mode III fracture problem of an arbitrarily oriented crack in a FGPM strip bonded to a FGPM half plane

This paper studies the mode III electro-elastic field of a cracked functionally graded piezoelectric strip bonded to a functionally graded piezoelectric half plane. The crack is oriented in arbitrary direction. The material properties along x-axis vary in exponential form. By using the Fourier transform, the problem can be formulated into a system of singular integral equations and solved by applying the Gauss–Chebyshev integration formula. The effects come from the edge, crack orientation and the nonhomogeneous material parameters on intensity factors are discussed graphically.     

A finite crack in a semi-infinite strip of a graded piezoelectric material under electric loading

In this paper, the mixed-mode crack problem for a functionally graded piezoelectric material (FGPM) strip is considered. It is assumed that the electroelastic properties of the strip vary continuously along the thickness of the strip, and that the strip is under in-plane electric loading. The problem is formulated in terms of a system of singular integral equations. The stress and electric displacement intensity factors are presented for various values of dimensionless parameters representing the crack size, the crack location, and the material nonhomogeneity.     

Mode I crack growth rate for yield strip model of a narrow piezoelectric ceramic body

A crack growth rate equation is found for a finite crack in a narrow transversely isotropic piezoelectric ceramic body under tensile loading. Use is made of the yield strip model. The crack is situated in the mid-plane and is parallel to the edges of the body. Integral transforms are applied to reduce the problem to a Fredholm integral equation of the second kind. The accumulated plastic displacement criterion is applied to crack growth at low stress levels. This results in a small crack growth rate equation with fourth-power stress intensity factor dependence. Numerical examples are given for piezoelectric ceramics and the crack growth rates are plotted as a function of body height to crack length ratio for various values of the electrical loads.     

Mode III eccentric crack in a functionally graded piezoelectric strip

This paper studies the internal crack problem located within one functionally graded piezoelectric strip. One crack is normal to the edge of the strip and the material properties vary along the direction of crack length. Three different boundary conditions and both impermeable and permeable cases are discussed. The problem can be reduced to a system of singular integral equations and solved by using the Gauss–Chebyshev formulas. The results show that the edge boundary conditions and the nonhomogeneous parameter significantly control the magnitudes of stress and electric displacement intensity factors.