Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography – mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography – mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30–1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography - mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30-1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Fast method for routine simultaneous analysis of methylmercury and butyltins in seafood

A simple, fast, and accurate method for the simultaneous determination of methylmercury (MeHg(+)), monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) in seafood is proposed. The method makes use of relatively cheap instrumentation and allows simultaneous analysis of those four species in a routine basis. The sample is treated with methanolic potassium hydroxide in an ultrasound bath, derivatised with sodium tetraethylborate (NaBEt(4)), preconcentrated into n-hexane and analysed by gas chromatography with atomic emission detection (GC-MIP/AES). The soft extraction conditions provided by ultrasound energy prevent chemical decomposition of the analytes and allow fast and efficient recovery of the species considered. Both the extraction and the derivatisation/preconcentration steps were optimised. Detection limits of 34, 3, 6 and 8 ng g(-1) (dry mass) were obtained for MeHg(+), MBT, DBT and TBT, respectively, using the best experimental conditions found. The uncertainty of the analysis ranged from 11% (MeHg(+)) to 15% (MBT). The accuracy of the method was checked by the analysis of several certified reference materials, e.g., BCR 477 (mussel tissue, MBT, DBT and TBT), DOLT-2 (dogfish liver, MeHg(+)), BCR 463 (tuna fish, MeHg(+)) and NIST 2976 (mussel tissue, MeHg(+)) with satisfactory results. Several oyster samples collected in the estuary of the Oka River (Urdaibai, Unesco Reserve of the Biosphere, Basque Country) during four sampling campaigns in 2003-2004 were processed following the proposed procedure. Concentrations ranging from 65 to 149 ng g(-1) (MeHg(+)), 相似文献   

A study of the partitioning and sorptive behaviour of butyltins in the aquatic environment

This study was designed to investigate the partitioning and sorptive behaviour of tributyltin(TBT), and its degradation products dibutylitin (DBT) and monobutyltin (MBT), in the aquatic environment. Factorial experiments were undertaken to determine the importance of pH and particulate matter concentration in the sorption of butyltin compounds to solid phases. Results indicate that in freshwaters MBT, and to a lesser extent TBT, will be partitioned towards the particulate phase, whereas DBT exhibits a 50:50 partitioning between particulate and solution phases. In estuarine waters, whilst MBT will almost exclusively sorb on to particulates, TBT will be predominantly in the solid-phase fractions but 10–30% may remain in solution. DBT, in contrast, is solubilized in estuarine waters. A more detailed investigation of TBT sorption and particulate matter concentration was undertaken using adsorption isotherms on different sediment types. The results from batch isotherm tests plotted according to the Freundlich adsorption model revealed that TBT adsorption varied with sediment type, increasing in the order sandy-silt < silty-sand < silty-clay. TBT sorption was found to be reversible, indicating that contaminated sediments may release TBT to overlying waters following sediment distrubance. Interstitial water partitioning studies indicate that TBT predominates in the particulate phase with partition coefficients for TBT higher than for DBT and MBT. The TBT partition coefficient in interstitial waters appears to be related to total organic carbon loadings.     

Effects of γ-sterilization on butyltin homogeneity and content in sediments: a GC–ICP–MS study

A GC-ICP-MS method based on extraction and alkylation of butyltins with sodium tetraethylborate was used to quantitatively assess the fate of these analytes in solutions and sediments following exposure to gamma-irradiation. The effects of a 2.5 Mrad sterilization dose on three butyltin species in both methanolic calibration solutions and in sediment matrices were investigated. Although significant losses of tributyltin (TBT, 90%), dibutyltin (DBT, 100%) and monobutyltin (MBT, 80%) were detected in standard solutions prepared in methanol following gamma-irradiation, no species inter-conversion occurred. Some degradation of TBT (38%) and DBT (32%) but no significant change in MBT content was found using a spiked sediment CRM HISS-1. Conversion DBT to MBT in spiked HISS-1 was deduced. Much smaller degradation of TBT (16% loss) and 10% loss of DBT by conversion to MBT (14% gain) was registered using a sediment blend of PACS-2 and HISS-1 (SOPH). Despite some initial losses of TBT and DBT due to irradiation, better than 2% RSD in both TBT and DBT concentrations measured in twelve different bottles of blended sediment SOPH were obtained, indicating the material may be considered homogeneous for these analytes. Results from a long-term five-year stability study of PACS-2 show that all three butyltins are stable during storage at 4 degrees C followed with 2.5 Mrad minimum dose of gamma-irradiation sterilization treatment.     

Determination of butyltins in environmental samples using sodium tetraethylborate derivatisation: characterisation and minimisation of interferences

Interferences affecting the determination of butyltin species by sodium tetraethylborate (STEB) derivatisation followed by purge-trap preconcentration were systematically studied using synthetic solutions, natural water samples and sediment extracts. Substances that did not cause interferences included most common cations (apart from those metal ions listed below), anions, metalloids and polar organic compounds. Natural organic matter (NOM) specifically interfered with tributyltin (TBT) due to a mechanism involving partitioning of the butyltin to the hydrophobic portions of the NOM. The metal ions Ag(I) (≥2 μM), Cd(II) (≥2 μM), Cu(II) (≥0.5 μM) interfered predominantly with the determination of monobutyltin (MBT) due to catalytic degradation of the STEB reagent. Pb(II) (≥14 μM) interfered with butyltin determination by an unknown mechanism. Other interferences to the purge-trap method were shown to occur in the presence of chelating agents (e.g. EDTA) or hydrophobic liquids such as diesel fuel. A mixture comprising methanol (MeOH), EDTA and Mn(II) was used to partially mask the effect of interfering NOM and metals. Spike recoveries (mean±S.D. of n=7 different samples) of MBT, dibutyltin (DBT) and TBT in contaminated natural water samples were improved from 70±36,90±11 and 91±24 to 102±10,98±3 and 98±4%, respectively. Spike recoveries (mean±S.D. of n=5 different samples) of MBT, DBT and TBT in aliquots of sediment extracts were improved from 86±17,79±18 and 59±32 to 97±6.2,103±3.6 and 103±5.0%, respectively. The ability to analyse larger aliquots of sediment extracts in the presence of the masking mixture improved the detection limit four-fold if MBT and DBT determination was required and 10-fold if only TBT determination was required.     

Degradation of dibutyltin in sea water by pyoverdins isolated from Pseudomonas chlororaphis

The yellow compounds pyoverdins were isolated from Pseudomonas chlororaphis, which was isolated from mud in Japan. Degradation of tributyltin (TBT), dibutyltin (DBT), and monobutyltin (MBT) by pyoverdin (20 mg) was carried in sea water (30 ml) containing a 6 µg l^?1 concentration of TBT, DBT, and MBT at 24 °C for 24 h in aerobic conditions. TBT, DBT, and MBT in sea water were analyzed by gas chromatography–mass spectrometry in selected ion monitoring mode. DBT in sea water was degraded to MBT by pyoverdins isolated from P. chlororaphis. However, TBT and MBT in sea water was not degraded by pyoverdins. The optimum degradation of DBT in sea water was at pH 4.8–8.2, at a temperature 25–30 °C. Copyright © 2002 John Wiley & Sons, Ltd.     

Electrochemical speciation of organotin compounds in water and sediments. Application to sea water after ion-exchange separation

For the quantitative speciation of tributyltin, Bu₃Sn⁺ (TBT), in the presence of dibutyltin, Bu₂Sn²⁺ (DBT), monobutyltin, BuSn³⁺ (MBT), triphenyltin, Ph₃Sn⁺ (TPT), and inorganic tin in water samples and sediments, an accurate, reproducible, simple and rapid electrochemical method was developed. After extraction of the organotin compounds with dichloromethane, TBT could be selectively determined as species by alternating current polarography directly in the organic phase without any derivatisation. The successful application of this technique could be proved by the results obtained by intercomparison exercises on TBT in water samples and sediments, organized by the Community Bureau of Reference (BCR). For the application of this technique to sea water samples a preliminary ion exchange separation of TBT from the major components of sea water was performed, achieving a detection limit for TBT in the ppt range.     

Efficiency of tributyltin extraction from rhine river sediment

A Rhine river sediment sample was spiked with tributyltin (TBT), equilibrated for ten days and the tributyltin extraction efficiency was optimised using a simplex algorithm. Analysis was effected using hydride generation gas chromatography-atomic absorption spectroscopy (GC-AAS) apparatus. The results show that, in this sediment sample, different molarities of HCl in methanol extract different species with varying extraction efficiencies. The least polar extraction solution extracted TBT more efficiently, whilst DBT and MBT require molar solution of HCl in methanol for efficient extraction.     

Occurrence of butyltin compounds in marine sediments and bivalves from three harbour areas (Saigon,Da Nang and Hai Phong) in Vietnam

A survey of organotin compounds comprising tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) in sediment and clam (Meretrix meretrix) was undertaken in Vietnam in 2003. Samples were collected from dry docks and cargo harbours in Ho Chi Minh (south), Da Nang (centre) and Hai Phong (north) cities. Measurable amounts of TBT, DBT and MBT were found in all samples. The total concentration of the butyltin compounds (ΣBTs) in sediment from shipyards and vessel repair yards (Nam Trieu, Song Cam, Lach Tray and Ba Son) were always higher than those measured in cargo ports (Hai Phong, Da Nang, and Sai Gon). The highest ΣBTs concentration (as tin: 122 ng g^?1 dry wt) was found in the sediment from Song Cam station, where seven shipyards are located. The lowest concentrations of ΣBTs occurred in sediments from the Da Nang and Hai Phong cargo ports (as tin: 21–22 ng g^?1 dry wt). This implies that the major source of BTs in the marine environment in Vietnam is from the shipbuilding activities. The ratio of TBT to Σ(MBT + DBT) in sediment was 0.67 ± 0.03 for all the sampling sites, indicating the recent use of TBT in Vietnam. For the clam (M. meretrix), the concentration of ΣBTs (as tin) varied in the range 11.2–60.1 ng g^?1 wet wt. There was a good correlation (R² = 0.85) between total organic matter‐normalized ΣBTs in sediment and hexane‐extractable organic matter‐normalized ΣBTs in clam soft tissue. The mean biota–sediment accumulation factors (organic carbon/lipid) for MBT, DBT and TBT in clam's soft tissue were found to be 1.83 ± 0.66, 1.44 ± 0.23 and 1.16 ± 0.47 respectively, indicating that sediment‐bound BTs might be an important source of contamination for the clam. Copyright © 2005 John Wiley & Sons, Ltd.     

Toxicity andaccumulation of tributyltin chloride on tilapia

Acute toxicity (96 h) and bioconcentration experiments of tributyltin chloride (TBT) in tilapia were conducted in an aqueous solution with salinity of 15‰, and a toxicity mechanism has been suggested. The 96-h LC₅₀ was 3.80 μg Sn l⁻¹. Bioconcentration factors in different tissues increased in the order muscle<gill<viscera. Studies on the metabolism of TBT showed that it can be easily degraded to DBT (dibutyltin) in these tissues. Further degradation of DBT to MBT (monobutyltin) was much more difficult. A mesocosm was used for the first time to study the toxicity of TBT in tilapia. The result demonstrated that the TBT bioconcentration curve changed with the initial concentrations of TBT but the order of bioconcentration in the tissues did not change. © 1998 John Wiley & Sons, Ltd.     

Speciation of butyltin compounds in environmental and biological samples using headspace single drop microextraction coupled with gas chromatography-inductively coupled plasma mass spectrometry

A method based on headspace single drop microextraction (HS-SDME) in combination with gas chromatography-inductively coupled plasma mass spectrometry (GC-ICP-MS) was proposed for the speciation analysis of butyltin compounds in environmental and biological samples. The sodium tetraethylborate (NaBEt4) and sodium tetrahydroborate (NaBH4) were used as the derivatizing reagent for in situ derivatization of the butyltins. For the two derivatizations, the HS-SDME parameters such as organic solvent, drop volume, sample pH, stirring rate, temperature, extraction time and the ionic strength were examined systematically. The analytical performance including the linearity ranges, limits of detection (LODs) and reproducibilities of the two derivatizations were compared under the respective optimized conditions. Derivatization with NaBEt(4) proved to be more sensitive and robust than that with NaBH4, leading to the LODs of 1.4 ng/L for MBT, 1.8 ng/L for DBT and 0.8 ng/L for TBT. The reproducibilities, expressed as relative standard deviations (RSDs), were in the range of 1.1-5.3% (c=1 microg/L, n=3). With tripropyltin (TPrT) as internal standard, HS-SDME-GC-ICP-MS with NaBEt(4) derivatization was applied for the speciation analysis of butyltins in real seawater and shellfish samples. The butyltins found in the real-world samples are 31ng/L MBT, 79 ng/L DBT and 32 ng/L TBT for seawater, and 11.6-30.4 ng/g MBT, 11.8-8.9 ng/g DBT and 12.8-52.6 ng/g TBT for different shellfish samples. For validation, the developed method was also employed for the speciation analysis of butyltins in certified reference material (CRM) of PACS-2 sediment, and the determined values are in a good agreement with the certified values. The developed method is simple, rapid, sensitive, and cost-effective and provides an attractive alternative for butyltins speciation in biological and environmental samples with complex matrix.     

Storage stability studies for tributyltin determination in human urine samples using headspace solid‐phase microextraction and gas chromatography mass spectrometry

A headspace solid‐phase micro‐extraction (HS‐SPME) method was employed in order to study the effect of storage conditions of human urine samples spiked with tributyltin (TBT) using gas chromatography and mass spectrometry. To render the analyte more volatile, the derivatization (ethylation) was made in situ by sodium tetraethylborate (NaBEt₄), which was added directly to dilute unpreserved urine samples and in buffers of similar acidity. The stability of TBT in human urine matrix was compared with the stability of TBT in buffer solutions of similar pH value. Critical parameters of storage conditions such as temperature and time, which affect the stability of TBT in this kind of matrix, were examined extensively. The tests showed that the stability of TBT remains practically satisfactory for a maximum of 2 days of storage either at +4 or 20°C. Greater variations were observed in the concentration of TBT in human urine samples at +4°C and lower ones at ?20°C over a month's storage. The freeze–thaw cycles have negative effect on the stability and should be kept to a minimum. The results from spiked urine samples are also discussed in comparison to those acquired from buffer solutions of equal TBT concentration. Copyright © 2012 John Wiley & Sons, Ltd.     

Automated headspace-solid-phase micro extraction-retention time locked-isotope dilution gas chromatography-mass spectrometry for the analysis of organotin compounds in water and sediment samples

An automated method for the simultaneous determination of six important organotin compounds namely monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), monophenyltin (MPhT), diphenyltin (DPhT) and triphenyltin (TPhT) in water and sediment samples is described. The method is based on derivatization with sodium tetraethylborate followed by automated headspace-solid-phase micro extraction (SPME) combined with GC-MS under retention time locked (RTL) conditions. Home-synthesized deuterated organotin analogues were used as internal standards. Two high abundant fragment ions corresponding to the main tin isotopes Sn118 and Sn120 were chosen; one for quantification and one as qualifier ion. The method was validated and excellent figures of merit were obtained. Limits of quantification (LOQs) are from 1.3 to 15 ng l(-1) (ppt) for water samples and from 1.0 to 6.3 microg kg(-1) (ppb) for sediment samples. Accuracy for sediment samples was tested on spiked real-life sediment samples and on a reference PACS-2 marine harbor sediment. The developed method was used in a case-study at the harbor of Antwerp where sediment samples in different areas were taken and subsequently screened for TBT contamination. Concentrations ranged from 15 microg kg(-1) in the port of Antwerp up to 43 mg kg(-1) near a ship repair unit.     

Determination of butyltin and phenyltin species by reversed-phase liquid chromatography and fluorimetric detection

Chromatographic separation of monobutyltin (MBT), monophenyltin (MPhT), dibutyltin (DBT), diphenyltin (DPhT), tributyltin (TBT) and triphenyltin (TPhT) was studied using end-capped reversed-phases (RP) and methanol-acetic acid-water or acetronitrile-acetic acid-water mixtures as mobile phases. Several RP columns were evaluated, and the effect of acetic acid, oxalic acid, triethylamine, and organic modifier on peak shape and retention was examined. A method based on gradient elution RPLC and fluorimetric detection is proposed for the determination of DBT, DPhT, TBT and TPhT. The sensitivity of the method makes it suitable for environmental analysis.     

Optimization of Modern Analytical SPME and SPDE Methods for Determination of <Emphasis Type="Italic">Trans</Emphasis>-2-nonenal in Barley,Malt and Beer

Trans-2-nonenal is an aldehyde contributing to an unpleasant off-flavor and odor of rancid butter in stored beer. The automated solid-phase microextraction technique (SPME) coupled with gas chromatography (GC) and solid-phase dynamic extraction (SPDE) coupled with gas chromatography were optimized and introduced to determine trans-2-nonenal in barley, malt and beer. Five types of SPME fibers coated with different stationary phases (100 μm PDMS, 65 μm PDMS/DVB, 85 μm CAR/PDMS, 50/30 μm DVB/CAR/PDMS, 85 μm PA) and two needles (PDMS, PDMS/AC) were compared and tested for their efficiencies in the headspace (HS) SPME and SPDE determination of trans-2-nonenal in barley, malt and beer. The highest extraction efficiency of HS-SPME was achieved with the PDMS/DVB fiber, and addition of 1.5 g of NaCl, extraction time was 20 min at 60 °C. The highest extraction efficiency of HS-SPDE was obtained with the PDMS needle, 15 extraction strokes at 60 °C and addition of 1.5 g of NaCl. Trans-2-nonenal was identified with the method of HS-SPME coupled gas chromatography-mass spectrometry (GC–MS); the samples were analyzed using the HS-SPME-GC-coupled gas chromatography-flame ionization detector (GC-FID) technique.     

Headspace solid-phase micro-extraction and gas chromatography-ion trap tandem mass spectrometry method for butyltin analysis in sediments: Optimization and validation

In this work, headspace solid-phase micro-extraction (SPME) combined with gas chromatography-mass spectrometry (GC-MS) method for analysis of butyltin compounds in sediment samples was upgraded by the introduction of tandem mass spectrometry (MS/MS). Optimization and validation of this method based on an one step procedure, tetraethylborate in situ ethylation with simultaneous extraction by headspace SPME, combined with tandem mass spectrometry is described. A simple leaching/extraction step of mono-(M), di-(D) and tri-(T) butyltin (BT) compounds from the sediment is required as sample pre-treatment. The combination of the two techniques headspace SPME and MS/MS, led to very little matrix interference which permitted to attain limits of detection three or more orders of magnitude lower than those attained in previous methods: 0.3 pg g^− 1 for MBT, 1 pg g^− 1 for DBT and 0.4 pg g^− 1 for TBT. Linear response range was from 0.02–1260 ng g^− 1 for MBT, 0.07–1568 ng g^− 1 for DBT and 0.04–2146 ng g^− 1 for TBT and RSD < 15% was also obtained. The method was efficiently applied to a real sample sediment from Sado River estuary in Portugal, revealing the existence of BTs pollution, as the TBT level of 189 ± 15 ng g^− 1 was much higher than the maximum established as provisional ecotoxicological assessment criteria.     

A quantitative extraction method for the determination of trace amounts of both butyl- and phenyltin compounds in sediments by gas chromatography-inductively coupled plasma mass spectrometry

A simple and reliable extraction method was developed for quantitative determination of both butyl- and phenyltin compounds in sediments by capillary gas chromatography combined with inductively coupled plasma mass spectrometry (GC-ICP-MS). Both types of organotin compounds were extracted quantitatively from sediment by mechanical shaking into tropolone-toluene and HCl-methanol. After phase separation and pH adjustment, these organotins were ethylated with sodium tetraethylborate. The method was evaluated by analyzing PACS-2 and NIES No. 12 sediment certified reference materials. The dibutyltin (DBT; 1.14 +/- 0.02 micrograms g-1) and tributyltin (TBT; 1.01 +/- 0.04 micrograms g-1) values observed in PACS-2 sediment closely matched the certified values (DBT, 1.09 +/- 0.15; TBT, 0.98 +/- 0.13 microgram g-1 as tin). The monobutyltin (MBT) value was higher (0.62 +/- 0.02 microgram g-1) by more than two fold over the reference value (0.3 microgram g-1 as tin). The concentrations of TBT (0.18 +/- 0.04 microgram g-1) and triphenyltin (TPhT; 0.0099 +/- 0.002 microgram g-1) in the NIES No. 12 sediment were also in good agreement with the certified and reference values of TBT (0.19 +/- 0.03 microgram g-1 as compound) and TPhT (0.008 microgram g-1 as compound), respectively. Recoveries of TBT, tripentyltin (TPeT) and TPhT from spiked sediments were satisfactory (TBT, 102 +/- 3.4%; TPrT, 96 +/- 3.4%; TPhT, 99 +/- 8.5%). The detection limits as tin were in the range 0.23-0.48 ng g-1 for a 0.5 g sample size. It is also noteworthy that clean-up of the extract is not necessary because of the superior selectivity of ICP-MS detection. The present method was successfully applied to marine sediment samples.     

Speciation of butyltin compounds by on-line HPLC-ETAA of tropolone complexes in environmental samples

Tropolone (Trop) forms in solution stable complexes with monobutyltin (MBT Trop₂) and dibutyltin (DBT Trop). This property has been used to develop a separation procedure of butyltin compounds by liquid chromatography on cyanopropyl-bonded silica columns with a solution of tropolone in toluene as eluent. Tin-specific detection by on-line ETAA allowed the development of a simple procedure suitable for the determination of tributyltin and dibutyltin in water and sediment samples.     

Butyltin compounds in severn sound,lake huron,canada

Severn Sound is a heavily used recreational and beating area in the southeast corner of Georgian Bay, Lake Huron, Canada. Because of the concern over the possible release of tributyltin species (TBT) from antifouling paints on boat hulls and marinas, surveys were carried out in 1989 and 1992 to determine the presence of this species and its degradation products dibutyltin (DBT) and monobutyltin (MBT) in this area. Many fish (pike and young–of–the–year spottail shiners) and sediment samples collected in 1989 contained detectable levels of TBT. A maximum concentration of TBT was recorded in northern pike in the spring to be 240 ng Sn g^?1. Maximum levels occurred in marinas during the beginning of the boating season and significantly reduced during the summer and early autumn, although the maximum value of TBT in sediment (392 ng Sn g^?1) was observed in the summer of 1989. The seasonal variation of TBT levels was further substantiated in the subsequent 1992 study, in which sediments from three areas in a marina were sampled at monthly intervals from May to October. TBT levels were much higher in May and then generally decreased with time. Mussels (Elliptio complanta) caged in the marina for three months also contained TBT. DBT was frequently detected in the sediments but less frequently in fish and mussels. MBT was generally below detection limits. Plants (macrophytes and cladophora) contained very small amounts of butyltin compounds.