Selective non-chromatographic determination of tributyltin in sediments using EDTA and diphenylcarbazone as masking agent

Two analytical procedures based on the generation of volatile tributyltin derivatives, their separation by headspace solid-phase microextraction (HS SPME) and subsequent determination using plasma optical emission spectrometry (OES) have been developed for the selective determination of trace tributyltin (TBT) in the presence of other butyltins and inorganic tin in sediments without the use of chromatography. A microwave-assisted leaching of tin compounds from the sediment using 25%_v/v acetic acid is applied for sample pretreatment. The first method takes advantage of TBT chloride releasing from the lecheate after adding 3 M hydrochloric acid, and subsequent separation of the analyte by HS SPME using Carboxen-poly(dimethylsiloxane) (CAR/PDMS). The second method involves the use of masking agents, namely ethylenediaminetetraacetic acid (EDTA) and diphenylcarbazone (DFC), which form stable chelates with monobutyltin (MBT) and dibutyltin (DBT), respectively, followed by the ethylation of tributyltin at pH 5 using sodium tetraethylborate (NaBEt4) solution. The final concentration of NaBEt4 is 0.05%_w/v. The parameters affecting the TBT derivatisation and separation by HS SPME have been optimised including the selection of SPME fibre coating (PDMS, CAR/PDMS), the amount of masking agents and NaBEt4 added, sorption time (2–40 min) and sorption temperature (25–60°C). Higher sensitivity and robustness are attained with the method involving ethylation derivatisation, leading to the limit of detection (LOD) of 3 ng L^?1. The selective release of TBT is observed from aqueous solutions, where the concentrations of MBT and DBT were in 2–50-fold excess to TBT. The SPME-TD-MIP-OES methods have been validated against several certified reference materials (CRMs), including SOPH-1 marine sediment, PACS-2 marine sediment and BCR 646 freshwater sediment.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography – mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography – mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30–1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography - mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30-1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Fast method for routine simultaneous analysis of methylmercury and butyltins in seafood

A simple, fast, and accurate method for the simultaneous determination of methylmercury (MeHg(+)), monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) in seafood is proposed. The method makes use of relatively cheap instrumentation and allows simultaneous analysis of those four species in a routine basis. The sample is treated with methanolic potassium hydroxide in an ultrasound bath, derivatised with sodium tetraethylborate (NaBEt(4)), preconcentrated into n-hexane and analysed by gas chromatography with atomic emission detection (GC-MIP/AES). The soft extraction conditions provided by ultrasound energy prevent chemical decomposition of the analytes and allow fast and efficient recovery of the species considered. Both the extraction and the derivatisation/preconcentration steps were optimised. Detection limits of 34, 3, 6 and 8 ng g(-1) (dry mass) were obtained for MeHg(+), MBT, DBT and TBT, respectively, using the best experimental conditions found. The uncertainty of the analysis ranged from 11% (MeHg(+)) to 15% (MBT). The accuracy of the method was checked by the analysis of several certified reference materials, e.g., BCR 477 (mussel tissue, MBT, DBT and TBT), DOLT-2 (dogfish liver, MeHg(+)), BCR 463 (tuna fish, MeHg(+)) and NIST 2976 (mussel tissue, MeHg(+)) with satisfactory results. Several oyster samples collected in the estuary of the Oka River (Urdaibai, Unesco Reserve of the Biosphere, Basque Country) during four sampling campaigns in 2003-2004 were processed following the proposed procedure. Concentrations ranging from 65 to 149 ng g(-1) (MeHg(+)), 相似文献   

Liquid-phase microextraction of tributyltin and triphenyltin coupled with gas chromatography-tandem mass spectrometry. Comparison between 4-fluorophenyl and ethyl derivatizations

This paper describes the liquid-phase microextraction (LPME) of tributyltin (TBT) and triphenyltin coupled with gas chromatography-tandem mass spectrometry. The 4-fluorophenylation and ethylation reactions were used for the derivatization of the organotins. For the two derivatizations, the LPME parameters such as organic solvent, stirring rate, temperature, extraction time and the other additional conditions were examined. Using pure water, the calibration curves, method detection limits (MDLs) and reproducibilities (RSDs) of the two derivatizations were compared under the respective optimized procedures. The 4-fluorophenyl derivatization, which showed a lower MDL (0.36 ng/l) and better reproducibility (RSD = 11% at 10 ng/l) for TBT, was applied to the analysis of seawater. The TBT was detected in the range from 1.1 to 2.0 ng/l in the seawater samples collected in Osaka Bay.     

Effects of γ-sterilization on butyltin homogeneity and content in sediments: a GC–ICP–MS study

A GC-ICP-MS method based on extraction and alkylation of butyltins with sodium tetraethylborate was used to quantitatively assess the fate of these analytes in solutions and sediments following exposure to gamma-irradiation. The effects of a 2.5 Mrad sterilization dose on three butyltin species in both methanolic calibration solutions and in sediment matrices were investigated. Although significant losses of tributyltin (TBT, 90%), dibutyltin (DBT, 100%) and monobutyltin (MBT, 80%) were detected in standard solutions prepared in methanol following gamma-irradiation, no species inter-conversion occurred. Some degradation of TBT (38%) and DBT (32%) but no significant change in MBT content was found using a spiked sediment CRM HISS-1. Conversion DBT to MBT in spiked HISS-1 was deduced. Much smaller degradation of TBT (16% loss) and 10% loss of DBT by conversion to MBT (14% gain) was registered using a sediment blend of PACS-2 and HISS-1 (SOPH). Despite some initial losses of TBT and DBT due to irradiation, better than 2% RSD in both TBT and DBT concentrations measured in twelve different bottles of blended sediment SOPH were obtained, indicating the material may be considered homogeneous for these analytes. Results from a long-term five-year stability study of PACS-2 show that all three butyltins are stable during storage at 4 degrees C followed with 2.5 Mrad minimum dose of gamma-irradiation sterilization treatment.     

Contamination of outdoor settled dust by butyltins in Malta

The presence of compounds of tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) was determined in outdoor settled dust collected from several sites on the island of Malta, mainly from flat rooftops of school buildings. The dust was separated into three size fractions with diameters (µm) > 250, 125–250 and < 125, and the two finer fractions were analysed for butyltins using extraction with glacial acetic acid followed by derivatization/solvent extraction with sodium tetraethylborate in the presence of iso‐octane and quantitation by gas chromatography with flame photometric detection. The presence of TBT, DBT and MBT was established in most of the samples and TBT concentrations varied from non‐detectable (<5 ng Sn g^?1) to highs of 15.5 and 18.7 µg Sn g^?1 in Senglea and Marsaxlokk. TBT was generally found at concentrations significantly higher than reported hitherto in house dust collected from European homes. The geographical distribution of total organotins in both dust fractions suggests that TBT originates mainly from antifouling marine paint residues which contaminate the urban environment when ships' hulls are sand‐ or hydro‐blasted during maintenance and repair at the drydocks facility in Grand Harbour. Other significant sources of TBT are located at Marsaxlokk fishing port and Wied i?‐?urrieq creek, both hosting sizeable communities of fishermen and leisure boating. The data also suggest that the municipal solid waste landfill at Maghtab is an inland source of butyltins. We suggest that dust containing harmful butyltins could possibly be ingested to expose humans to a risk which is probably of concern especially for young children living close to the hotspots of contamination. Copyright © 2007 John Wiley & Sons, Ltd.     

Determination of butyltin compounds in environmental samples by isotope-dilution GC–ICP–MS

Isotope-dilution analysis in combination with GC-ICP-MS detection has been applied to the determination of butyltin species in environmental samples. Different spikes containing the isotopically labeled butyltin species have been synthesized in the laboratory after optimization of the reaction conditions. The isotopic compositions of the tin species in the different spike solutions were determined by GC-ICP-MS after derivatization by aqueous ethylation with sodium tetraethylborate. Reverse isotope-dilution analysis was used for quantitation of the spike solutions by means of natural MBT, DBT, and TBT standards. The mixed spikes were used for simultaneous analysis of MBT, DBT and TBT in the certified reference materials, PACS-2, CRM 462, and CRM 646, with satisfactory results. The excellent agreement of the different speciation results obtained by use of the different spikes is a good indicator of the precision, accuracy, and reliability which can be achieved by using isotope-dilution analysis for trace metal speciation.Application of a double spike containing (119)Sn-enriched MBT (79.7 At%), (118)Sn-enriched DBT (86.7 At%), and (119)Sn-enriched TBT (83.1 At%) also enabled evaluation of the conditions resulting in quantitative extraction of the species from the solid matrix, in combination with possible alterations depending on the different extraction procedures used (mechanical shaking, ultrasounds, and microwaves). Mathematical equations used for this purpose computed the correct species concentrations directly and, additionally, the decomposition factors (from TBT to DBT and from DBT to MBT) after precise measurement of the (119)Sn/(120)Sn and (118)Sn/(120)Sn ratios for all butyltin species by GC-ICP-MS.     

Optimization of butyltin measurements for seawater,tissue, and marine sediment samples

Optimized techniques for measuring butyltins at the sub-part-per-trillion (ppb; 1:10¹²) level in seawater and at the part-per-billion (ppb; 1:10⁹) level in tissues and sediments are presented. Purge and trap/hydride derivatization followed by atomic absorption (AA) detection was optimized to give better sensitivity than was previously attained for seawater, yielding environmental detection limits of 0.08–0.2 ng dm^?3. Improvement in precision and reproducibility in measurement of butyltins in tissues and sediments was attained by adjustment of the concentration in an organic extract to minimize matrix effects and by use of internal standards. The tissues and sediments were homogenized and extracted with methylene chloride (CH₂Cl₂) after acidification. The butyltins in the organic layer were derivatized with hexylmagnesium bromide and analyzed by gas chromatography (GC) with a flame photometric detector (FPD). The absolute detection limits in tissues and sedimets were 0.1 ng for tributyltin (TBT), 0.12 ng for dibutyltin (DBT) and 0.29 ng for monobutyltin (MBT).     

Development and application of an ultratrace method for speciation of organotin compounds in cryogenically archived and homogenized biological materials

An accurate, ultra-sensitive and robust method for speciation of mono, di, and tributyltin (MBT, DBT, and TBT) by speciated isotope-dilution gas chromatography-inductively coupled plasma-mass spectrometry (SID-GC-ICPMS) has been developed for quantification of butyltin concentrations in cryogenic biological materials maintained in an uninterrupted cryo-chain from storage conditions through homogenization and bottling. The method significantly reduces the detection limits, to the low pg g(-1) level (as Sn), and was validated by using the European reference material (ERM) CE477, mussel tissue, produced by the Institute for Reference Materials and Measurements. It was applied to three different cryogenic biological materials-a fresh-frozen mussel tissue (SRM 1974b) together with complex materials, a protein-rich material (whale liver control material, QC03LH03), and a lipid-rich material (whale blubber, SRM 1945) containing up to 72% lipids. The commutability between frozen and freeze-dried materials with regard to spike equilibration/interaction, extraction efficiency, and the absence of detectable transformations was carefully investigated by applying complementary methods and by varying extraction conditions and spiking strategies. The inter-method results enabled assignment of reference concentrations of butyltins in cryogenic SRMs and control materials for the first time. The reference concentrations of MBT, DBT, and TBT in SRM 1974b were 0.92 +/- 0.06, 2.7 +/- 0.4, and 6.58 +/- 0.19 ng g(-1) as Sn (wet-mass), respectively; in SRM 1945 they were 0.38 +/- 0.06, 1.19 +/- 0.26, and 3.55 +/- 0.44 ng g(-1), respectively, as Sn (wet-mass). In QC03LH03, DBT and TBT concentrations were 30.0 +/- 2.7 and 2.26 +/- 0.38 ng g(-1) as Sn (wet-mass). The concentration range of butyltins in these materials is one to three orders of magnitude lower than in ERM CE477. This study demonstrated that cryogenically processed and stored biological materials are a promising alternative to conventional freeze-dried materials for organotin speciation analysis, because these are, at present, the best conditions for minimizing degradation of thermolabile species and for long-term archival. Finally, the potential of the analytical method was illustrated by analysis of polar bear (Ursus maritimus) and beluga whale (Delphinapterus leuca) liver samples that had been collected in the Arctic and archived at the Marine Environmental Specimen Bank. Significant concentrations of butyltin compounds were found in the samples and provide the first evidence of the presence of this class of contaminant in the Arctic marine ecosystem. Figure Eye catch image.     

Species-specific isotope dilution analysis of mono-, di,and tri-butyltin compounds in sediment using gas chromatography-inductively coupled plasma mass spectrometry with synthesized 118Sn-enriched butyltins

A species-specific isotope dilution (ID) method is described for the determination of mono-, di, and tri-butyltin compounds in sediment by gas chromatography-inductively coupled plasma mass spectrometry (GC-ICP-MS), where the mixture of 118Sn-enriched butyltin compounds synthesized in our laboratory was used as a spike. A correction method for the mass bias, a quantitative extraction of the butyltins from sediment, and an assay for the concentration of the standard solution for the reverse ID procedure were investigated to achieve a reliable ID analysis. The spike solution was added with tri-propyltin (TPrT), and the butyltins were extracted by mechanical shaking into acetic acid-tropolone-toluene. The extracted butyltins were ethylated with sodium tetraethylborate and measured by GC-ICP-MS. The mass bias correction factor for the butyltins was calculated with the measured area ratio of 120Sn/118Sn of TPrT in each chromatographic run, and the correction was carried out. The mass bias was well corrected with this in-run correction (the standard uncertainties of the corrected 120Sn/118Sn for the butyltins were in the range 0.03-0.45%, typically 0.25%, with triplicate measurement corresponding to 0.02-0.37% mass bias). The extraction efficiency of mono-butyltin (MBT) from sediment was improved by using tropolone-toluene as the solvent. Well-defined standard solutions for the reverse-ID procedure could be obtained by an assay for the purities of the natural abundance butyltin chloride reagents used for preparing the standard solutions. Overall uncertainties associated with the present method were estimated, where the sediment certified reference materials, PACS-2 and BCR 646, were analyzed. The uncertainty arising from the extraction was the main contributor to the overall uncertainties for MBT and di-butyltin (DBT) determinations, while with the case of tri-butyltin (TBT) determination the uncertainties arising from the purity of TBT chloride reagent used for preparing the standard solution was a large contributor to the overall uncertainties although the uncertainty arising from the extraction was also a main contributor. The analytical results of MBT, DBT, and TBT in both reference materials, except for MBT results in PACS-2, were in good agreement with the certified values in each. The result of MBT in PACS-2 (0.677 +/- 0.049 microg g(-1) as tin, mean +/- expanded uncertainty) was significantly higher than the certified value (0.45 +/- 0.05 microg g(-1)), but closely matched with the lately reported values (Rajendran, Tao, Nakazato and Miyazaki, Analyst, 2000, 125, 1757: 0.62 +/- 0.02 microg g(-1); Chiron, Roy, Cottier and Jeannot, J. Chromatogr. A, 2000, 879, 137: 0.634 +/- 0.082 microg g(-1); Alonso, Encinar, Gonzalez and Sanz-Medal, Anal. Bioanal. Chem., 2002, 373, 432: 0.64 +/- 0.04 microg g(-1). The present method is concluded to be reliable for the determination of MBT, DBT, and TBT in sediment.     

Levels of polycyclic aromatic hydrocarbons,polychlorinated byphenyls,methylmercury and butyltins in the natural UNESCO reserve of the biosphere of Urdaibai (Bay of Biscay,Spain)

Polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), methylmercury (MeHg⁺) and butyltins (mono-, di- and tri-butyltin, MBT, DBT and TBT) were monitored in oysters (Crassostrea sp.) and sediments collected in different sampling points of the UNESCO reserve of the biosphere of Urdaibai (Bay of Biscay) from March 2006 to June 2007. In the case of oyster samples, concentrations in the 290–1814 µg kg^?1 (PAHs), 70–475 µg kg^?1 (PCBs), 75–644 µg kg^?1 (MeHg⁺) and 200–1300 µg kg^?1 (as a sum of the three butyltins) ranges were obtained. In most samples TBT was the most abundant butyltin, followed by DBT and MBT. It should be highlighted that most samples exceeded the highest range (367 µg kg^?1) found in the last mussel watch programme carried out by the National Oceanic and Atmospheric Administration (NOAA) for butyltins in oyster samples. This could be due to the presence of a shipyard in the estuary. Sediment concentrations ranged as follows: total PAHs (856–3495 µg kg^?1) and total PCBs (58–220 µg kg^?1). Organometallic species were always below the limits of detection (LODs) (0.24 µg kg^?1 for MeHg⁺, 0.6 µg kg^?1 for MBT, 0.48 µg kg^?1 for DBT and 1.1 µg kg^?1 for TBT). In both sediment and oyster PAH sources were mostly combustion. In the case of PCBs, 4-6 chlorine-atom congeners were the most abundant ones. Slight differences in the profile of PAHs as well as PCBs can be detected when the matrices were compared with each other. Finally, in the case of PAHs, sediment and water column played the main role in the accumulation pathway into the organisms in all the sampling stations.     

Hepatic butyltin concentrations in beluga whales (Delphinapterus leucas) from the St Lawrence Estuary and northern Quebec,Canada

Butyltin (tributyltin TBT; dibutyltin DBT and monobutyltin MBT) speciation was measured in the liver of beluga whales from the St Lawrence Estuary and Hudson Strait (northern Quebec). Using GC–MS, liver samples were analysed from 21 beluga whales found dead, stranded along the shores of the St Lawrence during the period 1995–1998. In all cases, including a neonate specimen, the liver was contaminated with butyltin compounds with concentrations in the range 0.04–2.1 mg Sn kg⁻¹ on a dry weight basis. Liver samples of five beluga whales from Hudson Strait obtained in the summer of 1998 were also analysed. For these animals, hepatic butyltin concentrations were consistently below the detection limit (<0.5 ng Sn g⁻¹ for MBT and <0.2 ng Sn g⁻¹ for DBT and TBT). Compared with published data on the contamination by TBT of the marine mammals of the St Lawrence in 1988, these contemporary results clearly indicate that the level of contamination of the beluga whales in this coastal marine ecosystem has not decreased ten years after regulating the use of TBT‐based antifoulants on small craft. Copyright © 2000 John Wiley & Sons, Ltd.     

Speciation of butyl and phenyltin compounds using dispersive liquid-liquid microextraction and gas chromatography-flame photometric detection

Dispersive liquid-liquid microextraction and gas chromatography-flame photometric detection (DLLME-GC-FPD) were performed for the speciation of butyl and phenyltin compounds in water samples after derivatization with sodium tetraethylborate (NaBEt4). Some important parameters, such as pH, amount of NaBEt4, derivatization time, kind and volume of extraction and disperser solvents, extraction time and salt effect were investigated and optimized. High enrichment factors (825-1036) and low detection limits (0.2-1 ng L(-1)) were obtained under the optimum conditions. The calibration graphs were linear in the range of 0.5-1000 ng L(-1) (as Sn) for the target analytes. The relative standard deviations (RSDs) for the extraction of 20 ng L(-1) (as Sn) of butyl and phenyltin compounds varied from 2.3 to 5.9% (n=7) and from 4.1 to 8.8% (n=7) with and without using internal standard, respectively. Seawater and river water samples were successfully analyzed using the proposed method and the relative recoveries of the studied compounds in the water samples, at spiking levels of 10.0 and 100 ng L(-1) (as Sn) were obtained to be 82.5-104.7%.     

Tartaric acid extraction of organotin compounds from sediment samples

A new extraction method for the determination of tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) in sediments based on extraction with tartaric acid and methanol has been developed. Tin species were extracted from sediment samples using focused microwave technology, then ethylated with sodium tetraethylborate (NaBEt₄) and analyzed by isotope dilution (ID) gas chromatography-mass spectrometry (GC-MS). The advantages of such methodology in comparison with other established extraction methods for the routine speciation analysis of organotin compounds are discussed with respect to sulfur interferences co-extracted from complex matrices.Interferences from elemental sulfur are normally found with acetic acid extraction, but with tartaric acid extraction these interferences were eliminated, demonstrating selective extraction.The accuracy of the analytical procedure was established by analyzing a certified reference material (CRM) (PACS-2, marine sediment) and comparing the results to the certified values. Good agreement between determined and certified values for butyltin compounds was obtained. Finally, some complex sediment samples collected from San Vicente's Bay, Chile, were analyzed with the proposed methodology, demonstrating its potential value for monitoring butyltins in environmental samples with high concentrations of sulfur compounds.     

Isotope dilution GC-MS routine method for the determination of butyltin compounds in water

A standard GC-MS instrument with electron impact ionisation has been used to develop a fast, simple and reliable method for the simultaneous determination of monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) in water samples. Isotope dilution analysis (IDA) is used for the determination of species, taking advantage of a commercially available spike solution containing a mixture of MBT, DBT and TBT enriched in ¹¹⁹Sn. Method detection limits for 100-mL samples were between 0.18 and 0.25 ng L⁻¹ for the three butyltin compounds with typical RSD between 2 and 4% at levels between 100 and 10 ng L⁻¹, respectively. Recovery of tin species in spiked samples (natural water, wastewater and seawater) was quantitative. The stability of butyltin compounds in collected seawater samples was also studied. The addition of a 1% (v/v) glacial acetic acid preserved tin species in the samples for at least 5 days at room temperature. The IDA method was finally implemented in a routine testing laboratory and it was subsequently accredited by the Spanish National Accreditation Body according to the requirements of UNE-EN ISO/IEC 17025.     

Trends in flow-based analytical methods applied to pesticide detection: a review

Landfilling is the most common disposal of municipal waste. During the decomposition of different waste materials, several toxic compounds are leached. Although organotin compounds (OTC) represent an important group of pollutants in landfill leachates, there are only few analytical procedures reported for their analysis. These procedures are complex or recommend the use of enriched stable isotopes that are available only for butyltins. In the present work analytical procedure for simultaneous routine speciation analysis of methyl-, butyl-, phenyl- and octyl-tins in landfill leachates by GC-ICP-MS was developed. For this purpose the applicability of methanol as co-extraction reagent and Tris-citrate buffer for adjustment of pH for derivatization of OTC in landfill leachates was carefully investigated. The use of NaBEt(4) and NaBPr(4) as derivatization reagents for liquid-liquid extraction into hexane was critically evaluated. 15m GC column was used for rapid separation of OTC. The developed analytical procedure was sensitive (LODs for OTC investigated in general better than 2 ng Sn L(-1)) with good repeatability of measurement (RSDs mostly better than 3%) and was successfully applied in the analysis of OTC in landfill leachates using standard addition calibration method. Due to its simplicity and reliability it is appropriate to be used in routine laboratories for monitoring of OTC in landfill leachates.     

Acid/extraction treatment of bivalves for organotin speciation

A method is described for leaching of nanogram amounts of monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), monophenyltin (MPT), diphenyltin (DPT), triphenyltin (TPT), and monomethyltin (MMT) from bivalves. The procedure is based on soaking the samples in a water-hydrogen bromide mixture (1:1) with magnetic stirring for 30 min followed by extraction with a 0.04% (w/v) tropolone solution in dichloromethane for 2 h. Organotins are determined by GC-FPD after clean-up through a Florisil column and fat hydrolysis by 1mol/L NaOH, followed by derivatization through Grignard pentylation. The method has been applied for an investigation of the occurrence of organotins in bivalves in south-west Spain. Received: 3 September 1994 / Revised: 2 October 1996 / Accepted: 7 November 1996     

Trace determination of organotin compounds in water,sediment and mussel samples by low-pressure gas chromatography coupled to tandem mass spectrometry

A fast method for the determination of eight organotin compounds (OTs), monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), tetrabutyltin (TeBT), monophenyltin (MPhT), diphenyltin (DPhT), triphenyltin (TPhT) and tetraphenyltin (TePhT), in water, sediments and mussels, was developed using low-pressure gas chromatography/tandem mass spectrometry (LPGC/MS/MS). The method is based on sodium diethyldithiocarbamate (DDTC) complexation of the ionic organotins, followed by extraction of the target matrices and derivatization by a Grignard reagent, as described in a previously published method for water samples. Solid-phase extraction was selected as extraction method from water samples after comparison with liquid-liquid extraction, but extraction of the OTs from sediment and mussel samples was performed using toluene. Matrix-matched calibration standards were used to minimize matrix effects. The analytical process was validated by the analysis of spiked blank samples. Performance characteristics such as linearity, detection limit (LOD), quantitation limit (LOQ), precision, and recovery were determined. Recoveries of OTs in spiked matrices ranged from 86-108% in water and from 78-110% in sediments and mussels, with precision values lower than 18%. Detection limits ranged from 0.1-9.6 ng L(-1) in water, and 0.03-6.10 microg kg(-1) in the other matrices. The present implementation of LPGC rather than conventional capillary GC permitted use of large-volume injection and reduced analysis time by a factor of two. The proposed methodology was applied to the determination of OTs in real samples of water, marine sediments and mussels from the west coast of the Mediterranean Sea (Spain).     

Selective preconcentration and determination of tributyltin in fresh water by electrothermal atomic absorption spectrometry

A rapid and simple method for separation and determination of tributyltin (TBT) in mineral and tap water is described. The procedure is based on the selective retention of TBT by a chelating resin, Amberlite XAD-2 impregnated with tropolone. The addition of 0.8% sulfuric acid to the water sample leads to the retention of TBT by the resin while monobutyltin (MBT), dibutyltin (DBT) and inorganic tin remain in solution. TBT is eluted with methyl isobutyl ketone (MIBK) obtaining a preconcentration factor of 80. Tin concentration is determined by ETAAS using zirconium coated tubes. Multi-injection and hot injection techniques are used in order to enhance the sensitivity of the method. A detection limit of 14.4 ng L(-1) is achieved with recoveries near to 100%. The procedure has been successfully applied to TBT determination in various fresh water samples.