Synthesis of graphene oxide sheets decorated by silver nanoparticles in organic phase and their catalytic activity

The graphene oxide(GO) sheets decorated by Ag nanoparticles were prepared using a liquid–liquid two-phase method at the room temperature. The synthesized samples existed in the organic phase and were characterized by X-ray diffraction, transmission electron microscopy, UV–vis spectroscopy and Raman spectra. The results demonstrate that these silver-nanoparticles with diameter of about 10 nm assembled on graphene oxide sheets are flexible and can form stable suspensions in organic phase. Raman signals of graphene oxide sheets are increased by the attached silver nanoparticles, displaying higher surface-enhanced Raman scattering activity. Furthermore, Ag/GO are found to serve as effective catalysts to activate the reduction of 4-nitrophenol (4NP) in the presence of NaBH₄.     

Characterization of PEO/PVP/GO nanocomposite solid polymer electrolyte membranes: microstructural,thermo-mechanical,and conductivity properties

Poly (ethylene oxide) (PEO)/polyvinylpyrrolidone (PVP) blended nanocomposite polymers, incorporating graphene oxide (GO) nano-sheets and embedded with NaIO₄ salt, were prepared using solution casting technique. The as-prepared nanocomposite electrolyte membranes were characterized by SEM, TEM, XRD, and Raman vibrational spectroscopic techniques to confirm the dispersion of GO nano-sheets and to understand the synergistic properties of GO/polymer interactions as a function of GO nano-sheets concentration. GO fillers incorporated electrolyte membranes demonstrated distinctive surface morphology composed of circular-shaped protuberances of different dimensions. The decrease of Raman intensity ratio (I_D/I_G) and in-plane crystallite size (L_a) values of the nanocomposites suggested the good dispersion and confinement of the GO nano-sheets. The optical properties of blend electrolyte films were studied as a function of GO filler concentration using optical absorption and diffuse reflectance spectra. In reference to PEO/PVP/NaIO₄, the resultant PEO/PVP/NaIO₄/GO (0.4% in weight) electrolyte membrane demonstrated both an increase in tensile strength of ca. 42% and in Young’s modulus of ca. 40%, improvements coupled with a maximum fractured elongation of 3%. Through impedance spectroscopy analysis, the role of the GO nano-sheets onto the room temperature conductivity properties of the prepared electrolyte membranes has been probed.     

Partial reduction of graphene oxide upon intercalation into exfoliated manganese thiophosphate

Abstract

We have prepared novel nanohybrid Li_2xMn_1?xPS₃/GO films consisting of graphene oxide (GO) and exfoliated MnPS₃ nanosheets via an easy mixing protocol at room temperature. These films were investigated by SEM and AFM, as well as XRD, Raman and XPS spectroscopies, obtaining information about the nature of the interaction between MnPS₃ and GO. In particular, the dark colour of the nanocomposite film and, more to the point, the analysis of (i) the C1s core level XPS spectra, (ii) the interlayer spacing obtained by XRD measurements and (iii) the increment in the intensity ratio I_D/I_G of the two bands typical of the carbon region of GO Raman spectra, suggest that a partial reduction of GO can be obtained right upon intercalation into Li_2xMn_1?xPS₃.     

Molecular responses of cells to 2-mercapto-1-methylimidazole gold nanoparticles (AuNPs)-mmi: investigations of histone methylation changes

Reduced graphene oxide (RGO) sheet was functionalized with nanocrystalline cellulose (NCC) via click coupling between azide-functionalized graphene oxide (GO-N₃) and terminal propargyl-functionalized nanocrystalline cellulose (PG-NCC). First, the reactive azide groups were introduced on the surface of GO with azidation of 2-chloroethyl isocyanate-treated graphene oxide (GO-Cl). Then, the resulted compounds were reacted with PG-NCC utilizing copper-catalyzed azide-alkyne cycloaddition. During the click reaction, GO was simultaneously reduced to graphene. The coupling was confirmed by Fourier transform infrared, Raman, DEPT135, and ¹³C NMR spectroscopy, and the complete exfoliation of graphene in the NCC matrix was confirmed with X-ray diffraction measurement. The degree of functionalization from the gradual mass loss of RGO-NCC suggests that around 23 mass % has been functionalized covalently. The size of both NCC and GO was found to be in nanometric range, which decreased after click reaction.     

Ultrasound assisted reduction of graphene oxide to graphene in l-ascorbic acid aqueous solutions: Kinetics and effects of various factors on the rate of graphene formation

The reduction of graphene oxide (GO) to graphene (rGO) was achieved by using 20 kHz ultrasound in l-ascorbic acid (l-AA, reducing agent) aqueous solutions under various experimental conditions. The effects of ultrasound power, ultrasound pulse mode, reaction temperature, pH value and l-AA amount on the rates of rGO formation from GO reduction were investigated. The rates of rGO formation were found to be enhanced under the following conditions: high ultrasound power, long pulse mode, high temperature, high pH value and large amount of l-AA. It was also found that the rGO formation under ultrasound treatment was accelerated in comparison with a conventional mechanical mixing treatment. The pseudo rate and pseudo activation energy (E_a) of rGO formation were determined to discuss the reaction kinetics under both treatment. The E_a value of rGO formation under ultrasound treatment was clearly lower than that obtained under mechanical mixing treatment at the same condition. We proposed that physical effects such as shear forces, microjets and shock waves during acoustic cavitation enhanced the mass transfer and reaction of l-AA with GO to form rGO as well as the change in the surface morphology of GO. In addition, the rates of rGO formation were suggested to be affected by local high temperatures of cavitation bubbles.     

Hydrothermal synthesis of CdTe quantum dots–TiO2–graphene hybrid

CdTe–TiO₂–graphene nanocomposites were successfully synthesized via a simple and relatively general hydrothermal method. During the hydrothermal environment, GO was reduced to reduced graphene oxide (RGO), accompanying with the anchoring of TiO₂ nanoparticles on the surface of RGO. In the following process, CdTe quantum dots (QDs) were then in situ grown on the carbon basal planes. The morphologies and structural properties of the as-prepared composites were characterized by X-ray diffraction, Raman spectroscopy, transmission electron microscopy and fluorescent spectroscopy. It is hoped that our current work could pave a way towards the fabrication of QDs–TiO₂–RGO hybrid materials.     

P–n junction characteristics of graphene oxide and reduced graphene oxide on n-type Si(111)

The semiconductor behavior of graphene oxide (GO) and reduced graphene oxide (RGO) synthesized by the Hummers method on n-type Si(111) were investigated. Graphene oxide is a product of the oxidation of graphite, during which numerous oxygen functional groups bond to the carbon plane during oxidation. RGO was prepared by adding excess hydrazine to the GO showing p-type semiconductor material behavior. In the C–O bond, the O atom tends to pull electrons from the C atom, leaving a hole in the carbon network. This results in p-type semiconductor behavior of GO, with the carrier concentration dependent upon the degree of oxidation. The RGO was obtained by removing most of the oxygen-containing functionalities from the GO using hydrazine. However, oxygen remaining on the carbon plane caused the RGO to exhibit p-type behavior. The I–V characteristics of GO and RGO deposited on n-type Si(111) forming p–n junctions exhibited different turn-on voltages and slope values.     

Investigation of Raman and photoluminescence studies of reduced graphene oxide sheets

In this paper, we are investigating the Raman and photoluminescence properties of reduced graphene oxide sheets (rGO). Moreover, graphene oxide (GO) sheets are synthesized using Hummer’s method and further reduced into graphene sheets using D-galactose. Both GO and rGO are characterized by UV-vis spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Thermogravimetric (TGA) analysis. Raman analysis of rGO shows the restoration of graphitic domains in GO after reduction. The photoluminescence of rGO showed emission in the UV region which is blue shifted along with luminescent quenching as compared to GO. This blue shift and quenching in photoluminescence arises due to the newly formed crystalline sp² clusters in rGO which created percolation pathways between the sp² clusters already present.     

Graphene nanosheets: Ultrasound assisted synthesis and characterization

A facile sonochemical route for the synthesis of graphene nanosheets via reduction of graphene oxide (GO) has been reported. The synthesized graphene sheets are characterized using UV–vis spectra, Fourier transform infra-red (FT-IR) spectra, transmission electron microscope, X-ray photoelectron spectra (XPS) and Raman spectroscopic techniques. The UV–vis spectroscopy results showed that the absorption peak was red shifted due to the reduction of GO into graphene. FT-IR and XPS spectra revealed the removal of oxygenated functional groups in graphene after the reduction process. Raman spectra confirmed the restoration of new sp² carbon domains in graphene sheets after the reduction. The sonochemical approach for the synthesis of graphene nanosheets is relatively fast, cost-effective and efficient as compared to other methods.     

Ecofriendly Route for the Synthesis of Highly Conductive Graphene Using Extremophiles for Green Electronics and Bioscience

Highly conductive biocompatible graphene is synthesized using ecofriendly reduction of graphene oxide (GO). Two strains of non‐pathogenic extremophilic bacteria are used for reducing GO under both aerobic and anaerobic conditions. Degree of reduction and quality of bacterially reduced graphene oxide (BRGO) are monitored using UV–vis spectroscopy, X‐ray photoelectron spectroscopy, and Raman spectroscopy. Structural morphology and variation in thickness are characterized using electron microscopy and atomic force microscopy, respectively. Electrical measurements by three‐probe method reveal that the conductivity has increased by 10⁴–10⁵ fold from GO to BRGO. Biocompatibility assay using mouse fibroblast cell line shows that BRGO is non‐cytotoxic and has a tendency to support as well as enhance the cell growth under laboratory conditions. Hereby, a cost effective, non‐toxic bulk reduction of GO to biocompatible graphene for green electronics and bioscience application is achieved using halophilic extremophiles for the first time.     

Reduction of silver nanoparticles onto graphene oxide nanosheets with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylformamide and SERS activities of GO/Ag composites

Silver nanoparticles (Ag NPs) have been homogeneously deposited onto graphene oxide (GO) nanosheets by an optimal method, in which N,N-dimethylformamide (DMF) as a co-dispersant of GO and reductant of sliver ions is added to an aqueous suspension of GO and AgNO₃. GO nanosheets are uniformly covered by Ag NPs with a narrow size distribution and inter-particle gap. Raman signals of GO are greatly enhanced after deposition owing to the charge transfer interaction of GO with Ag NPs. The GO/Ag composite can be further utilized as an effective surface-enhanced Raman scattering (SERS) active substrate. Several new Raman bands and frequency shifts are clearly observed in using 4-aminothiophenol (4-ATP) as a Raman probe on GO/Ag compared to the normal Raman spectrum of solid 4-ATP. The Raman enhancement arises from a major electromagnetic effect and a minor chemical effect.     

Graphene Modified Lipophilically by Stearic Acid and its Composite With Low Density Polyethylene

Graphene, prepared by the thermal reduction of graphite oxide (GO), was modified with stearic acid to enhance its lipophilicity. A novel method, using the intrinsic epoxy groups on the graphene, was utilized for reaction with stearic acid to minimize the negative impact of the normal functionalization method on the π-electronic system of graphene. Gravimetric analysis, thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) showed that the stearic acid was effectively attached to the graphene. In addition, Raman spectroscopy and electric conductivity of the graphene showed that this novel modification method, utilizing intrinsic defects, did not damage the π-electronic system of the sp² bonded carbons. The dispersion of graphene in a low density polyethylene (LDPE) matrix was enhanced; consequently, the reinforcing effect in tensile testing was improved by the lipophilic modification. The crystallization behavior observed by differential scanning calorimetry (DSC) showed that the crystallization of LDPE was hindered by dispersed graphene, more evidently when dispersed uniformly.     

Effects of annealing temperature on GO–Cu2O composite films grown by electrochemical deposition for PEC photoelectrode

In this work, graphene oxide–cuprous oxide (GO–Cu₂O) composite films were grown on fluorine-doped tin oxide substrates by electrochemical deposition. We investigated the effects of the annealing temperature on the morphological, structural, optical and photoelectrochemical (PEC) properties of GO–Cu₂O composite films. As a result, our work shows that while GO–Cu₂O composite films exhibit the highest XRD (111) peak intensity at 300 °C sample, the highest photocurrent density value obtained was −4.75 mA/cm² at 200 °C sample (using 0.17 V versus a reversible hydrogen electrode (RHE)). In addition, a reduction reaction at 300 °C sample was observed using XPS analysis from the shift in the O1s peak in addition to a weaker O1s peak intensity.     

DFT study of graphene oxide reduction by a dopamine species

Recently a large interest has arisen for using less active reducers of graphene oxide, GO, that are friendly with the environment. In the present work, a DFT theoretical study on the reduction process of GO model surfaces is performed taking into account zwitterionic dopamine, ZDA, as reducing agent. Several periodic models representing epoxy and hydroxyl patches on GO basal plane are proposed. As the number of oxide groups in a patch of epoxies or hydroxyls on the surface of graphene increases from 1 to 5, these systems become more stable. Whereas the adsorption of ZDA on patches of GO with 5 epoxy groups is non-dissociative, that of ZDA on patches of GO with 5 hydroxyl groups is fundamentally dissociative, reducing the surface of graphene oxide. The H₂O molecule produced in the GO reduction becomes trapped to ZDA through a hydrogen bond. The ZDA binding to GO was analysed by considering electrostatic effects and attractive non-covalent contributions due to vdW interactions.     

Sonochemical synthesis and application of rhodium–graphene nanocomposite

Abstract  

Highly water dispersible rhodium–graphene nanocomposite have been successfully synthesized by the simple reduction of Rh³⁺ salt on poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) (PEO/PPO/PEO) triblock copolymer or pluronic-stabilized graphene oxide (GO) nanosheets with borohydride. Rhodium nanoparticles, having average size of 1–3 nm, are homogeneously distributed through out the graphene sheets. Some porous structures of graphene sheets have also been observed after the reduction of pluronic-stabilized GO in the presence of metal ions. The material is very effective for hydrogenation of arenes, especially for benzene as the substrate material at the room temperature and 5 atm pressure of hydrogen.     

Electrochemical performance of CeO<Subscript>2</Subscript> nanoparticle-decorated graphene oxide as an electrode material for supercapacitor

Cerium oxide nanoparticles and cerium oxide nanoparticle-decorated graphene oxide (GO) are synthesized via a facile chemical coprecipitation method in the presence of hexadecyltrimethylammonium bromide (CTAB). Nanostructure studies and electrochemical performances of the as-prepared samples were systematically investigated. The crystalline structure and morphology of the nanocomposites were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), transition electron microscopy (TEM), Raman spectrum, and X-ray photoelectron spectroscopy (XPS). Electrochemical properties of the CeO₂ electrode, the GO electrode, and the nanocomposites electrodes were investigated by cyclic voltammetry (CV), galvanostatic charge/discharge (GCD), and electrochemical impedance spectroscopy (EIS) measurements. The CeO₂ nanoparticle-decorated GO (at the mole ratio of CeO₂/GO = 1:4) electrode exhibited excellent supercapacitive behavior with a high specific capacitance of 382.94 F/g at the current density of 3.0 A/g. These superior electrochemical features demonstrate that the CeO₂ nanoparticle-decorated GO is a promising material for next-generation supercapacitor systems.     

Scanning transmission X‐ray microscopy probe for in situ mechanism study of graphene‐oxide‐based resistive random access memory

Here, an in situ probe for scanning transmission X‐ray microscopy (STXM) has been developed and applied to the study of the bipolar resistive switching (BRS) mechanism in an Al/graphene oxide (GO)/Al resistive random access memory (RRAM) device. To perform in situ STXM studies at the C K‐ and O K‐edges, both the RRAM junctions and the I₀ junction were fabricated on a single Si₃N₄ membrane to obtain local XANES spectra at these absorption edges with more delicate I₀ normalization. Using this probe combined with the synchrotron‐based STXM technique, it was possible to observe unique chemical changes involved in the BRS process of the Al/GO/Al RRAM device. Reversible oxidation and reduction of GO induced by the externally applied bias voltages were observed at the O K‐edge XANES feature located at 538.2 eV, which strongly supported the oxygen ion drift model that was recently proposed from ex situ transmission electron microscope studies.     

Preparation and electrochemical properties of LiFePO<Subscript>4</Subscript>/graphene composites from tailoring graphene oxides

LiFePO₄/graphene composites have been prepared by using tailoring graphene oxide (GO) nanosheets as precursors. The structure and electrochemical properties of the composites were investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), Raman microscopy, and a variety of electrochemical testing techniques. The decrease in graphene size reduces the contact resistance between activated materials, and enhances the lithium-ion transport in LiFePO₄/graphene composites. With low weight fractions of small-size graphene sheets, the composites show better electrochemical performance than those with large size graphene sheets.     

Structural and magnetic properties of reduced graphene oxide-TiO2 nanoflower composite

We have focused on the structural and magnetic properties of hazardous acid free synthesis of anatase titanium dioxide (TiO₂) phase nanoflower and reduced graphene oxide-TiO₂ (rGO-TiO₂) nanocomposite using hydrothermal process. Because, strong acids free synthesis is environmental friendly and reduce overall cost of synthesized samples. In the synthesis of rGO-TiO₂, synthesized TiO₂ nanoflower and graphene oxide (GO) were used as reagents. The resulting materials have analyzed using different techniques such as, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and Fourier Transformation Infrared spectrophotometer for confirmation of flower like morphology, crystalline phase and chemical composition. Moreover, VSM analysis has revealed the ferromagnetism induced in the rGO-TiO₂ composite at room temperature. The values of saturation magnetization were found to be 0.002 and ~ 0.243±0.04 emu/g for TiO₂ nanoflower and rGO-TiO₂ nanocomposite, respectively. In comparison of pure TiO₂, rGO-TiO₂ exhibited larger magnetization at room temperature. This is because presences of various edge and site defects such as topological and point defects like vacancies, which create localized unpaired spins in reduced graphene oxide (rGO), induce the ferromagnetism behavior in rGO-TiO₂ nanocomposite.     

Fabrication of multiwalled carbon nanotubes in the channels of iron loaded three dimensional mesoporous material by catalytic chemical vapour deposition technique

The growth of multiwalled carbon nanotubes (MWNTs) was successfully achieved in the channels of three dimensional (3D) iron loaded mesoporous matrices (KIT-6) by employing catalytic chemical vapour deposition (CCVD) technique. The synthesised MWNTs, which were characterised by SEM, TEM and Raman spectroscopy, consist of thick graphene layers of about 10 nm composed of 29 graphene sheets with inner and outer diameter of ∼17 nm and ∼37 nm, respectively. The Raman spectrum showed the formation of well-graphitised MWNTs with significantly higher I_G/I_D ratio of 1.47 compared to commercial MWNTs. Comparatively, 2 wt% Fe loaded KIT-6 material produced a better yield of 91%, which is also highest compared with the report of MWNTs synthesis using mesoporous materials reported so far.