Organo‐Palladium(II)‐Verbindungen mit PdC4‐Koordination: Phenylethinyl‐ und Methylphenylethinylkomplexe

Tetrakis(p‐tolyl)oxalamidinato‐bis[acetylacetonatopalladium(II)] ([Pd₂(acac)₂(oxam)]) reacted with Li–C≡C–C₆H₅ in THF with formation of [Pd(C≡C–C₆H₅)₄Li₂(thf)₄] ( 1a ). Reaction of [Pd₂(acac)₂(oxam)] with a mixture of 6 equiv. Li–C≡C–C₆H₅ and 2 equiv. LiCH₃ resulted in the formation of [Pd(CH₃)(C≡C–C₆H₅)₃Li₂(thf)₄] ( 2 ), and the dimeric complex [Pd₂(CH₃)₄(C≡C–C₆H₅)₄Li₄(thf)₆] ( 3 ) was isolated upon reaction of [Pd₂(acac)₂(oxam)] with a mixture of 4 equiv. Li–C≡C–C₆H₅ and 4 equiv. LiCH₃. 1 – 3 are extremely reactive compounds, which were isolated as white needles in good yields (60–90%). They were fully characterized by IR, ¹H‐, ¹³C‐, ⁷Li‐NMR spectroscopy, and by X‐ray crystallography of single crystals. In these compounds Li ions are bonded to the two carbon atoms of the alkinyl ligand. 1a reacted with Pd(PPh₃)₄ in the presence of oxygen to form the already known complexes trans‐[Pd(C≡C–C₆H₅)₂(PPh₃)₂] and [Pd(η²‐O₂)(PPh₃)₂]. In addition, 1a is an active catalyst for the Heck coupling reaction, but less active in the catalytic Sonogashira reaction.     

Amidophosphine‐stabilized palladium complexes catalyse Suzuki–Miyaura cross‐couplings in aqueous media

We report a simple and efficient procedure for Suzuki–Miyaura reactions in aqueous media catalysed by amidophosphine‐stabilized palladium complexes trans‐{L³PPh₂}₂PdCl₂ ( 3 ), trans‐{L³PPhtBu}₂PdCl₂ ( 4 ), [Pd(η³‐C₃H₅)(L³PPh₂)Cl] ( 5 ) and {Pd[2‐(Me₂NCH₂)C₆H₄](L³PPh₂)Cl} ( 6 ). The acidity of the NH proton in complexes 3 , 4 , 5 , 6 plays an important role in their catalytic activity. In addition, the palladium complexes cis‐{L¹PPh₂}PdCl₂ ( 1 ) and trans‐{L²PPh₂}₂PdCl₂ ( 2 ) stabilized by phosphines containing Y,C,Y‐chelating ligands L^1,2 have also been found to be useful catalysts for Suzuki–Miyaura reactions in aqueous media. The method can be effectively applied to both activated and deactivated aryl bromides yielding high or moderate conversions. The catalytic activity of couplings performed in pure water increases when utilizing a Pd complex with more acidic NH protons. A decrease of palladium concentration from 1.0 to 0.5 mol% does not lead to a substantial loss of conversion. In addition, Pd complex 1 can be efficiently recovered using two‐phase system extraction. Copyright © 2016 John Wiley & Sons, Ltd.     

Luminescent Amphiphilic 2,6‐Bis(1‐alkylpyrazol‐3‐yl)pyridyl Platinum(II) Complexes: Synthesis,Characterization, Electrochemical,Photophysical, and Langmuir–Blodgett Film Formation Studies

Two series of novel platinum(II) 2,6‐bis(1‐alkylpyrazol‐3‐yl)pyridyl (N5Cn) complexes, [Pt(N5Cn)Cl][X] ( 1 – 9 ) and [Pt(N5Cn)(C?CR)][X] ( 10 – 13 ) (X=trifluoromethanesulfonate (OTf) or PF₆; R=C₆H₅, C₆H₄‐p‐CF₃ and C₆H₄‐p‐N(C₆H₅)₂), with various chain lengths of the alkyl groups on the nitrogen atom of the pyrazolyl units have been successfully synthesized and characterized. Their electrochemical and photophysical properties have been studied. Some of their molecular structures have also been determined by X‐ray crystallography. Two amphiphilic platinum(II) 2,6‐bis(1‐tetradecylpyrazol‐3‐yl)pyridyl (N5C14) complexes, [Pt(N5C14)Cl]PF₆ ( 7 ) and [Pt(N5C14)(C?CC₆H₅)]PF₆ ( 13 ), were found to form stable and reproducible Langmuir–Blodgett (LB) films at the air–water interface. The characterization of such LB films has been investigated by the study of their surface pressure–area (π–A) isotherms, UV/Vis spectroscopy, XRD, X‐ray photoelectron spectroscopy (XPS), FTIR, and polarized IR spectroscopy. The luminescence property of 13 in LB films has also been studied.     

Synthesis and characterizations of arsine– and stibine–ligated Schiff base palladacycles and their applications in Suzuki–Miyaura cross‐coupling reactions

A series of arsine‐ and stibine‐ligated Schiff base palladacycles were synthesized by the reaction of μ‐Cl‐bridged Schiff base palladacycles [Pd(C₆H₄CH]NC₆H₂R)(μ‐Cl)]₂ (R = 2,4,6‐trimethyl or 2,6‐diisopropyl) with AsPh₃ or SbPh_3. The new arsine‐ and stibine‐ligated palladacycles were fully characterized using ¹H NMR, ¹³C NMR and infrared spectroscopies, high‐resolution mass spectrometry, elemental analysis and single‐crystal X‐ray diffraction. Further exploration of the catalytic application of the palladacycles for Suzuki–Miyaura cross‐coupling reactions of aryl bromides with arylboronic acids was carried out. It was found that the new palladacycles are considerably active for these coupling reactions. Copyright © 2016 John Wiley & Sons, Ltd.     

The trans influence of the pyridine ligand on ruthenium(II)–porphyrin–carbene complexes

In the two ruthenium(II)–porphyrin–carbene complexes ­(di­benzoyl­carbenyl‐κC)(pyridine‐κN)(5,10,15,20‐tetra‐p‐tolyl­porphyrinato‐κ⁴N)­ruthenium(II), [Ru(C₁₅H₁₀O₂)(C₅H₅N)(C₄₈H₃₆N₄)], (I), and (pyridine‐κN)(5,10,15,20‐tetra‐p‐tolyl­porphyrinato‐κ⁴N)[bis(3‐tri­fluoro­methyl­phenyl)­carbenyl‐κC]­ruthenium(II), [Ru(C₁₅H₈F₆)(C₅H₅N)(C₄₈H₃₆N₄)], (II), the pyridine ligand coordinates to the octahedral Ru atom trans with respect to the carbene ligand. The C(carbene)—Ru—N(pyridine) bonds in (I) coincide with a crystallographic twofold axis. The Ru—C bond lengths of 1.877 (8) and 1.868 (3) Å in (I) and (II), respectively, are slightly longer than those of other ruthenium(II)–porphyrin–carbene complexes, owing to the trans influence of the pyridine ligands.     

Synthesis of poly(1‐chloro‐2‐arylacetylene)s with high cis‐content and examination of their absorption/emission properties

A series of 1‐chloro‐2‐arylacetylenes [Cl‐C?C‐Ar, Ar = C₆H₅ ( 1 ), C₆H₄‐p‐i Pr ( 2 ), C₆H₄‐p‐Oi Pr ( 3 ), C₆H₄‐p‐NHC(O)Ot Bu ( 4 ), and C₆H₄‐o‐i Pr ( 5 )] were polymerized using (tBu₃P)PdMeCl/silver trifluoromethanesulfonate (AgOTf) and MoCl₅/SnBu₄ catalysts. The corresponding polymers [poly( 1 )–poly( 5 )] with weight‐average molecular weights of 6,500–690,000 were obtained in 10–91% yields. THF‐insoluble parts, presumably high‐molecular weight polymers, were formed together with THF‐soluble polymers by the Pd‐catalyzed polymerization. The Pd catalyst polymerized nonpolar monomers 1 and 2 to give the polymers in yields lower than the Mo catalyst, while the Pd catalyst polymerized polar monomers 3 and 4 to give the corresponding polymers in higher yields. The ¹H NMR and UV–vis absorption spectra of the polymers indicated that the cis‐contents of the Pd‐based polymers were higher than those of the Mo‐based polymers, and the conjugation length of the Pd‐based polymers was shorter than that of the Mo‐based polymers. Pd‐based poly( 5 ) emitted fluorescence most strongly among poly( 1 )–poly( 5 ). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 382–388     

Synthesis,characterization and theoretical and fluorescence emission microscopy studies of new Pd/Pt–cyclopropa[60]fullerene complexes: Application of Taguchi method for optimization of parameters in Suzuki–Miyaura reaction

The reactions of unsymmetric phosphorus ylides of the type [Ph₂P(CH₂)_nPPh₂?C(H)C(O)C₆H₄‐p‐CN] (n = 1 (Y¹); n = 2 (Y²)) with C₆₀ and M(dba)₂ (M = Pd or Pt; dba = dibenzylideneacetone) are reported. Based on the various coordination modes of these ylides in complexation, the following new Pd/Pt–cyclopropa[60]fullerene complexes were obtained: P,C‐coordinated [(η²‐C₆₀)Pd(κ²‐Y¹)] ( 1 ) and [(η²‐C₆₀)Pt(κ²‐Y¹)] ( 2 ) complexes and P‐coordinated [(η²‐C₆₀)Pd(Y²)₂] ( 3 ) and [(η²‐C₆₀)Pt(Y²)₂] ( 4 ) complexes. These compounds were characterized using Fourier transform infrared, UV–visible and NMR (¹H, ¹³C and ³¹P) spectroscopies and scanning electron microscopy. Furthermore, cytotoxicity studies showed that nanoparticles of these complexes can be used as non‐toxic labels for cellular imaging application. Also energy decomposition analysis results revealed that the percentage contribution of ΔE_elec in total interaction energy is considerably larger than that of ΔE_orb. Thus, in all complexes the (η²‐C₆₀)M? (Y¹) bond is considerably more electrostatic in nature than the (η²‐C₆₀)? M(Y¹) bond. Finally, by application of the Taguchi method for optimization of parameters in Suzuki–Miyaura reaction, the catalytic activity of Pd complexes 1 and 3 was investigated in the cross‐coupling reaction of various aryl chlorides with phenylboronic acid. According to analysis of variance results, solvent has the highest F value and it has high contribution percentage (36.75%) to the yield of Suzuki–Miyaura reaction.     

Synthesis and Characterization of Monomeric Aryloxo Palladium Complexes of the Type [Pd(N–N)(OAr)(C6F5)]. Crystal Structure of [Pd(tmeda)(C6F5)(OC6H4NO2‐p)]

Mononuclear palladium‐hydroxo complexes of the type [Pd(N–N)(C₆F₅)(OH)][(N–N) = 2,2′‐bipyridine (bipy), 4,4′‐dimethyl‐2,2′‐bipyridine (Me₂bipy), 1,10‐phenantroline (phen) or N,N,N′,N′‐tetramethylethylenediamine (tmeda) react with phenols ArOH in tetrahydrofuran giving the corresponding aryloxo complexes [Pd(N–N)(C₆F₅)(OAr)]. Elemental analyses and spectroscopic (IR, ¹H and ¹⁹F) methods have been used to characterize the new complexes. The X‐ray crystal structure of [Pd(tmeda)(C₆F₅)(OC₆H₄NO₂‐p)] has been determined. In the crystal packing the planes defined by two C₆H₄ rings show a parallel orientation. There are also intermolecular C–H···F and C‐H···O hydrogen bonds.     

The first example of a two‐coordinated AuI atom bonded to an FeII atom and an N‐heterocyclic carbene (NHC) ligand

The aurophilicity exhibited by Au^I complexes depends strongly on the nature of the supporting ligands present and the length of the Au–element (Au—E) bond may be used as a measure of the donor–acceptor properties of the coordinated ligands. A binuclear iron–gold complex, [1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene‐2κC²]dicarbonyl‐1κ²C‐(1η⁵‐cyclopentadienyl)gold(I)iron(II)(Au—Fe) benzene trisolvate, [AuFe(C₅H₅)(C₂₇H₃₆N₂)(CO)₂]·3C₆H₆, was prepared by reaction of K[CpFe(CO)₂] (Cp is cyclopentadienyl) with (NHC)AuCl [NHC = 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene]. In addition to the binuclear complex, the asymmetric unit contains three benzene solvent molecules. This is the first example of a two‐coordinated Au atom bonded to an Fe and a C atom of an N‐heterocyclic carbene.     

Synthesis and Characterization of Diorganocobalt Chlorides by Aliphatic Vinylic C–Cl Bond Activation

Three diorganocobalt chlorides [CoClMe(PMe₃)₂–{(C₅H₆)–CH=O}] ( 4 ), [CoClMe(PMe₃)₂–{(C₆H₈)–CH=O}] ( 5 ), and [CoClMe(PMe₃)₂–{(C₆H₇Memeta)–CH=O}] ( 6 ) were synthesized through cyclometalation reactions with aldehyde as an anchoring group involving aliphatic vinylic C–Cl bond activation. Complexes 4 – 6 were characterized by IR and NMR spectroscopy. The crystal and molecular structures of complexes 4 and 5 were determined by single‐crystal X‐ray diffraction. Complexes 4 – 6 are stable in solution at room temperature, but they decompose at above 30 °C affording C,C‐couplings products with the formation of [Co(PMe₃)₃Cl]. The results of this work will be important for people to deepen the understanding of the C–Cl bond activation mechanism.     

Synthesis,characterization and catalytic activity of new aminomethyldiphosphine–Pd(II) complexes for Suzuki cross‐coupling reaction

A new range of CF₃‐substituted aminomethyldiphosphine (P―C―N) ligands ((C₆H₅)₂PCH₂)₂NR (R = ―C₆H₄(2‐CF₃) ( 1 ), ―C₆H₄(3‐CF₃) ( 1b ) has been synthesized from 2‐(trifluoromethyl)aniline and 3‐(trifluoromethyl)aniline with diphenylphosphine. The aminomethyldiphosphine ligands were reacted with Pd(cod)Cl₂ to give corresponding metal complexes, PdLCl₂ ( 2a , 2b ). The aminomethyldiphosphine–palladium compounds were characterized by utilizing several methods including NMR (¹H, ¹³C, ³¹P) and elemental analysis. These compounds were used as catalysts in Suzuki cross‐coupling reaction of aryl chlorides and bromides. The effect of base was also investigated in this current project. CF₃‐substituted aminomethyldiphosphine–palladium complexes were found to be efficient catalysts in Suzuki cross‐coupling reaction of activated and deactivated aryl boronic acids. Copyright © 2013 John Wiley & Sons, Ltd.     

3D semiconducting Co–MOFs based on 5‐(hydroxymethyl)isophthalic acid and imidazole derivatives: syntheses and crystal structures

Two three‐dimensional cobalt‐based metal–organic frameworks with 5‐(hydroxymethyl)isophthalic acid (H₂HIPA), namely poly[[μ₂‐1,4‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene‐κ²N³:N^3′][μ₂‐5‐(hydroxymethyl)isophthalato‐κ²O¹:O³]cobalt(II)], [Co(C₉H₆O₅)(C₁₄H₁₄N₄)]_n ( 1 ), and poly[tris[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)benzene‐κ²N³:N^3′]bis[μ₃‐5‐(hydroxymethyl)isophthalato‐κ²O¹:O³:O⁵]dicobalt(II)], [Co₂(C₉H₆O₅)₂(C₁₂H₁₀N₄)₃]_n ( 2 ), were synthesized under similar hydrothermal conditions. Single‐crystal X‐ray diffraction analyses revealed that 5‐(hydroxymethyl)isophthalate (HIPA^2?) and 1,4‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene (1,4‐BMIB) are simple linkers connecting cobalt centres to build a fourfold interpenetration dia framework in complex 1 . However, complex 2 is a pillared‐layer framework with a (3,6)‐connected network constructed by 1,4‐bis(1H‐imidazol‐1‐yl)benzene (1,4‐DIB) linkers, 3‐connected HIPA^2? ligands and 6‐connected Co^II centres. The above significant structural differences can be ascribed to the introduction of the different auxiliary N‐donor ligands. Moreover, UV–Vis spectroscopy and Mott–Schottky measurements confirmed that complexes 1 and 2 are typical n‐type semiconductors.     

Rare‐Earth‐Metal–Hydrocarbyl Complexes Bearing Linked Cyclopentadienyl or Fluorenyl Ligands: Synthesis,Catalyzed Styrene Polymerization,and Structure–Reactivity Relationship

A series of rare‐earth‐metal–hydrocarbyl complexes bearing N‐type functionalized cyclopentadienyl (Cp) and fluorenyl (Flu) ligands were facilely synthesized. Treatment of [Y(CH₂SiMe₃)₃(thf)₂] with equimolar amount of the electron‐donating aminophenyl‐Cp ligand C₅Me₄H‐C₆H₄‐o‐NMe₂ afforded the corresponding binuclear monoalkyl complex [({C₅Me₄‐C₆H₄‐o‐NMe(μ‐CH₂)}Y{CH₂SiMe₃})₂] ( 1 a ) via alkyl abstraction and C? H activation of the NMe₂ group. The lutetium bis(allyl) complex [(C₅Me₄‐C₆H₄‐o‐NMe₂)Lu(η³‐C₃H₅)₂] ( 2 b ), which contained an electron‐donating aminophenyl‐Cp ligand, was isolated from the sequential metathesis reactions of LuCl₃ with (C₅Me₄‐C₆H₄‐o‐NMe₂)Li (1 equiv) and C₃H₅MgCl (2 equiv). Following a similar procedure, the yttrium‐ and scandium–bis(allyl) complexes, [(C₅Me₄‐C₅H₄N)Ln(η³‐C₃H₅)₂] (Ln=Y ( 3 a ), Sc ( 3 b )), which also contained electron‐withdrawing pyridyl‐Cp ligands, were also obtained selectively. Deprotonation of the bulky pyridyl‐Flu ligand (C₁₃H₉‐C₅H₄N) by [Ln(CH₂SiMe₃)₃(thf)₂] generated the rare‐earth‐metal–dialkyl complexes, [(η³‐C₁₃H₈‐C₅H₄N)Ln(CH₂SiMe₃)₂(thf)] (Ln=Y ( 4 a ), Sc ( 4 b ), Lu ( 4 c )), in which an unusual asymmetric η³‐allyl bonding mode of Flu moiety was observed. Switching to the bidentate yttrium–trisalkyl complex [Y(CH₂C₆H₄‐o‐NMe₂)₃], the same reaction conditions afforded the corresponding yttrium bis(aminobenzyl) complex [(η³‐C₁₃H₈‐C₅H₄N)Y(CH₂C₆H₄‐o‐NMe₂)₂] ( 5 ). Complexes 1 – 5 were fully characterized by ¹H and ¹³C NMR and X‐ray spectroscopy, and by elemental analysis. In the presence of both [Ph₃C][B(C₆F₅)₄] and AliBu₃, the electron‐donating aminophenyl‐Cp‐based complexes 1 and 2 did not show any activity towards styrene polymerization. In striking contrast, upon activation with [Ph₃C][B(C₆F₅)₄] only, the electron‐withdrawing pyridyl‐Cp‐based complexes 3 , in particular scandium complex 3 b , exhibited outstanding activitiy to give perfectly syndiotactic (rrrr >99 %) polystyrene, whereas their bulky pyridyl‐Flu analogues ( 4 and 5 ) in combination with [Ph₃C][B(C₆F₅)₄] and AliBu₃ displayed much‐lower activity to afford syndiotactic‐enriched polystyrene.     

UHMWPE with short‐chain branches synthesized by alkenyl substituted phenoxy–imine catalysts in ethylene polymerization

The alkenyl substituted phenoxy–imine complexes [2‐C₃H₅‐6‐(2, 3, 5, 6‐C₆F₄H‐N?CH)C₆H₃O]₂TiCl₂ (C₃H₅=? CH₂? CH?CH₂ or ? CH?CH? CH₃) are synthesized and characterized by ¹H NMR, ¹³C NMR, and elemental analysis. When activated by MAO, they show high activity for the polymerization of ethylene to UHMWPE under different conditions (temperatures and polymerization time). Most of the resulting polymers have high molecular weights (>1.0 × 10⁶ g·mol^?1) and high melting points as well as crystallinity. To clarify the effect of the alkenyl group on the catalytic performance and the resultant polymer microstructure, the corresponding saturated complexes of type [2‐C₃H₇?6‐(2, 3, 5, 6‐C₆F₄H‐N?CH)C₆H₃O]₂TiCl₂ where C₃H₇ = –CH₂? CH₂? CH₃ or ? CH(CH₃)₂ were synthesized and tested as catalysts in ethylene polymerization under the same reaction conditions. The microstructure and morphologies of these two species of PE samples were fully compared by the analysis of ¹³C NMR, GPC, DSC, and SEM. As a result, the allyl substituted complex show the highest activity to prepare the highest molecular weight polyethylene of all the catalysts. An interesting feature of the UHMWPE produced by these four catalysts is that they contain only a few short‐chain branches (mainly methyl, isobutyl and 2‐methylhexyl branches) in a low amount (<2.7 branches/1000 C). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3808–3818     

Investigation of Suzuki–Miyaura catalyst‐transfer polycondensation of AB‐type fluorene monomer using coordination‐saturated aryl Pd(II) halide complexes as initiators

Novel triarylamine‐based coordination‐saturated aryl Pd(II) halide complexes ligated by PEt₃, PCy₃, and P(o‐tol)₃ were successfully synthesized by direct oxidative addition of aryl halide to the corresponding Pd(0) precursors. Suzuki–Miyaura coupling polymerization of 2‐(7‐halide‐9,9‐dioctylfluoren‐2‐yl)?1,3,2‐dioxaborinane with these Pd(II) complexes as initiators was investigated for the synthesis of poly(fluorene)s with triarylamine end group. Pd(II) complexes with PCy₃ or P(o‐tol)₃ exhibited catalytic activity and realized the catalyst‐transfer polycondensation at 75 °C and room temperature, respectively, while the polymerization using Pd(II) catalyst ligated by PEt₃ did not proceed, which indicated that the bulky phosphine ligands could facilitate the reductive elimination and further promote the polymerization. In addition, the dimeric Pd(II) complex with P(o‐tol)₃ can convert into monomeric Pd(II) intermediate with an open coordination site, which had a higher activity. The end groups of the afforded polyfluorene were analyzed by matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) mass spectrometry, in which the Ar/H end groups are indicative of the catalyst‐transfer polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1457–1463     

Two ZnII‐based MOFs constructed with biphenyl‐2,2′,5,5′‐tetracarboxylic acid and flexible N‐donor ligands: syntheses,structures and properties

Two new Zn²⁺‐based metal–organic frameworks (MOFs) based on biphenyl‐2,2′,5,5′‐tetracarboxylic acid, i.e. H₄(o,m‐bpta), and N‐donor ligands, namely, poly[[(μ₄‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis{[1,3‐phenylenebis(methylene)]bis(1H‐imidazole)}dizinc(II)] dimethylformamide monosolvate dihydrate], {[Zn₂(C₁₆H₆O₈)(C₁₄H₁₄N₄)₂]·C₃H₇NO·2H₂O}_n or {[Zn₂(o,m‐bpta)(1,3‐bimb)₂]·C₃H₇NO·2H₂O}_n ( 1 ) {1,3‐bimb = [1,3‐phenylenebis(methylene)]bis(1H‐imidazole)}, and poly[[(μ₄‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis{[1,4‐phenylenebis(methylene)]bis(1H‐imidazole)}dizinc(II)] monohydrate], {[Zn₂(C₁₆H₆O₈)(C₁₄H₁₄N₄)₂]·H₂O}_n or {[Zn₂(o,m‐bpta)(1,4‐bimb)₂]·H₂O}_n ( 2 ) {1,4‐bimb = [1,4‐phenylenebis(methylene)]bis(1H‐imidazole)}, have been synthesized under solvothermal conditions. The complexes were characterized by IR spectroscopy, elemental analysis, single‐crystal X‐ray diffraction and powder X‐ray diffraction analysis. Structurally, the (o,m‐bpta)^4? ligands are fully deprotonated and combine with Zn²⁺ ions in μ₄‐coordination modes. Complex 1 is a (3,4)‐connected porous network with honeycomb‐like [Zn₂(o,m‐bpta)]_n sheets formed by 4‐connected (o,m‐bpta)^4? ligands. Complex 2 exhibits a (2,4)‐connected network formed by 4‐connected (o,m‐bpta)^4? ligands linking Zn²⁺ ions in left‐handed helical chains. The cis‐configured 1,3‐bimb and 1,4‐bimb ligands bridge Zn²⁺ ions to form multi‐membered [Zn₂(bimb)₂] loops. Optically, the complexes show strong fluorescence and display larger red shifts compared to free H₄(o,m‐bpta). Complex 2 shows ferroelectric properties due to crystallizing in the C_2v polar point group.     

Square Planar Nickel（II） Complexes with Halogenated o-Diiminobenzosemiquinonato Ligation： Synthesis,Characterization, and Redox Property

Seven square planar bis（o-diiminobenzosemiquinonato）nickel（II） complexes, [Ni（o-C6H4（NH）（NAr））2] （Ar= Mes, 1; p-F-C6H4, 2; p-CI-C6H4, 3）, [Ni（o-4,5-F2-C6H2（NH）（NPh））2] （4）, and [Ni（o-4,5-CIz-C6H2（NH）（NAr））2] （Ar =Ph, 5; 2,6-F2-C6H3, 6; 2,6-C12-C6H3, 7）, have been synthesized and characterized by 1H NMR, 13C NMR, 19F NMR, IR, UV-Vis-NIR, elemental analyses, HRMS, as well as single-crystal X-ray diffraction studies （1 and 7）. The cyclic voltammograms of these complexes exhibit two reversible redox processes of [NiLe]0n- and [NIL2]l /2 , and one irreversible process of [NiL2]~n＋. Substituent effects on the redox properties of these complexes, in addi- tion with those of the known complexes [Ni（o-C6Ha（NH）（NPh））2] （8） and [Ni（o-3,5-Butz-C6Hz（NH）2）2] （9）, are identified by comparing the half-wave potentials of the reduction waves, as 1 ~ 9 〈 8 ~ 2 〈 3 〈 4 〈 5 〈 7 〈 6, reflect- ing the ease of reduction of [NIL2] parallels the electron-donating and -withdrawing ability of the substituent group. Reduction of 1 with one or two equivalents of sodium metal in THF has led to the isolation of [Na（THF）3][I] and [Na（THF）3]2[1]. The structure data of these two complexes revealed by low-temperature X-ray crystallography suggest their corresponding electronic structures of [Nill（lL-1 ）（IL2-）]1- and [Ni1]（1L2 ）212-, which are in line with those of [9]n （n = 1-, 2-） suggested by spectroelectrochemical study.     

Zn/Mn–MOFs with `S‐shaped' packing modes

Two novel polymers exhibiting metal–organic frameworks (MOFs) have been synthesized by the combination of a metal ion with a benzene‐1,3,5‐tricarboxylate ligand (BTC) and 1,10‐phenanthroline (phen) under hydrothermal conditions. The first compound, poly[[(μ₄‐benzene‐1,3,5‐tricarboxylato‐κ⁴O:O′:O′′:O′′′)(μ‐hydroxido‐κ²O:O)bis(1,10‐phenanthroline‐κ²N,N′)dizinc(II)] 0.32‐hydrate], {[Zn₂(C₉H₃O₆)(OH)(C₁₂H₈N₂)₂]·0.32H₂O}_n, denoted Zn–MOF, forms a two‐dimensional network in which a binuclear Zn₂ cluster serves as a 3‐connecting node; the BTC trianion also acts as a 3‐connecting centre. The overall topology is that of a 6³ net. The phen ligands serve as appendages to the network and interdigitate with phen ligands belonging to adjacent parallel sheets. The second compound, poly[[(μ₆‐benzene‐1,3,5‐tricarboxylato‐κ⁷O¹,O^1′:O¹:O³:O^3′:O⁵:O^5′)(μ₃‐hydroxido‐κ²O:O:O)(1,10‐phenanthroline‐κ²N,N′)dimanganese(II)] 1.26‐hydrate], {[Mn₂(C₉H₃O₆)(OH)(C₁₂H₈N₂)]·1.26H₂O}_n, denoted Mn–MOF, exists as a three‐dimensional network in which an Mn₄ cluster serves as a 6‐connecting unit, while the BTC trianion again plays the role of a 3‐connecting centre. The overall topology is that of the rutile net. Phen ligands act as appendages to the network and form the `S‐shaped' packing mode.     

Acetylene Dithiolate Linking up the [Tp′W(CO)(CN)] Moiety with RuII or PdII

A series of heterodinuclear complexes with acetylene dithiolate (acdt^2?) as the bridging moiety were synthesised by a facile one‐pot procedure that avoided use of the highly elusive acetylene dithiol. Generation of the W–Ru complex [Tp′W(CN)(CO)(C₂S₂)Ru(η⁵‐C₅H₅)(PPh₃)] (Tp’=hydrotris(3,5‐dimethylpyrazolyl)borate) and the W–Pd complexes [Tp′W(CN)(CO)(C₂S₂)Pd(dppe)] and [Tp′W(CO)₂(C₂S₂)Pd(dppe)][PF₆] (dppe=1,2‐bis(diphenylphoshino)ethane), which exhibit a [W(η²‐κ²‐C₂S₂)M] core (M=Ru, Pd), was accomplished by using a transition‐metal‐assisted solvolytical removal of the Me₃Si‐ethyl thiol protecting groups. All intermediate species of the reaction have been fully characterised. The highly coloured W–Ru complex [Tp′W(CN)(CO)(C₂S₂)Ru(η⁵‐C₅H₅)(PPh₃)] shows reversible redox chemistry, as does the prototype complex [Tp′W(CO)₂(C₂S₂)Ru(η⁵‐C₅H₅)(PPh₃)][PF₆]. Single crystal X‐ray diffraction and IR, EPR and UV/Vis spectroscopic studies in conjunction with DFT calculations prove the high electronic delocalisation of states over the acdt^2? linker. Comparative studies revealed a higher donor strength and more pronounced dithiolate character of acdt^2? in [Tp′W(CN)(CO)(C₂S₂)Ru(η⁵‐C₅H₅)(PPh₃)] relative to [Tp′W(CO)₂(C₂S₂)Ru(η⁵‐C₅H₅)(PPh₃)]⁺. In addition, the influence of the overall complex charge on the metric parameters was investigated by single‐crystal X‐ray diffraction studies with the W–Pd complexes [Tp′WL₂(C₂S₂)Pd(dppe)] (L=(CN^?)(CO) or (CO)₂). The central [W(C₂S₂)Pd] units exhibit high structural similarity, which indicates the extensive delocalisation of charge over both metals.     

Vinyl homo/copolymerization of norbornene and ethylene using sterically enhanced 1,2‐bis(arylimino)acenaphthene–palladium precatalysts

A family of unsymmetrical 1,2‐bis(imino)acenaphthene‐palladium methyl chloride complexes [1‐[2,6‐{(C₆H₅)₂CH}₂‐ 4‐{C(CH₃)₃}‐C₆H₂N]‐2‐(ArN)C₂C₁₀H₆]PdMeCl (Ar = 2,6‐Me₂Ph Pd1 , 2,6‐Et₂Ph Pd2 , 2,6‐ⁱPr₂Ph Pd3 , 2,4,6‐Me₃Ph Pd4 , 2,6‐Et₂‐4‐MePh Pd5 ) have been prepared and fully characterized by ¹H/¹³C NMR, FTIR spectroscopies, and elemental analysis. X‐ray diffraction analysis of Pd2 complex revealed a square planar geometry. Upon activation with methylaluminoxane, all the palladium complexes displayed high activities for norbornene (NBE) homo‐polymerization producing insoluble polymer. For the copolymerization of NBE with ethylene, Pd4 complex exhibited good activities with high incorporation of ethylene (up to 59.2–77.4%) and the resultant copolymer showed high molecular weights as maximum as 150.5 kg mol⁻¹. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 922–930