Tungstate supported mesoporous silica SBA‐15 with imidazolium framework as a hybrid nanocatalyst for selective oxidation of sulfides in the presence of hydrogen peroxide

In this work, a new heterogeneous catalyst (SBA‐15/Im/WO₄^2?) was prepared, and then its performance in the oxidation of organic sulfides was studied (using 30% H₂O₂ as green oxidant under neutral reaction conditions). This organic–inorganic hybrid mesoporous material was characterized by various techniques, such as FT‐IR, inductively coupled plasma, X‐ray powder diffraction, high‐resolution‐transmission electron microscopy, N₂ adsorption–desorption and thermogravimetric analysis. The catalyst was also applied to the selective oxidation of various sulfides. The hybrid catalyst was easily recovered, and was very stable and retained good activity for at least five successive runs without any additional activation. Moreover, there was no remarkable decrease in the activity and selectivity of the catalyst. The products could be easily isolated by just removing the solvent after filtering the catalyst. The yields of the catalytic productions through this catalyst were in the range from 75% to 97%.     

Synthesis new Co–Mn mixed oxide catalyst for the production of light olefins by tuning the catalyst structure

In order to increase the catalyst activity for Fischer–Tropsch synthesis (FTS), the preparation methods of two new catalysts were studied. The chemically identical bimetallic Co–Mn/Al₂O₃ catalysts were synthesized by different synthetic methods: (a) via thermal decomposition of the complex [Co_1.33Mn_0.667(C₇H₃NO₄)₂(H₂O)₅].2H₂O ( 1 ) and (b) by the impregnation technique. The complex was characterized by the single‐crystal analysis, elemental analysis, and Fourier‐transform infrared (FT‐IR) spectroscopy. Both catalysts were characterized by powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X‐ray spectrometry (EDS), Brunauer–Emmett–Teller (BET) specific surface area, hydrogen temperature‐programmed reduction (H₂‐TPR), and H₂‐chemisorption. The catalysts' activity was investigated for the Fischer–Tropsch synthesis in a fixed bed microreactor. Higher activity was obtained for the catalyst prepared by thermal decomposition of the inorganic precursor due to its small particle size, superior dispersion, and higher surface area. The results show that the catalyst prepared thermal decomposition has 21% ethylene, 10% propylene, and 50% C₅⁺ selectivity, while methane selectivity of this catalyst is 11% at 250°C. On the other hand, the catalyst obtained by the impregnation method displays 15% ethylene, 8% propylene, 29% C₅⁺_, and 29% methane selectivity at the same temperature.     

Fe3O4‐SAHPG‐Pd0 nanoparticles: A ligand‐free and low Pd loading quasiheterogeneous catalyst active for mild Suzuki–Miyaura coupling and C?H activation of pyrimidine cores

This paper reports a green magnetic quasiheterogeneous efficient palladium catalyst in which Pd⁰ nanoparticles have been immobilized in self‐assembled hyperbranched polyglycidole (SAHPG)‐coated magnetic Fe₃O₄ nanoparticles (Fe₃O₄‐SAHPG‐Pd⁰). This catalyst has been used for effective ligandless Pd catalyzed Suzuki–Miyaura coupling reactions of different aryl halides with substituted boronic acids at room temperature and in aqueous media. Herein, SAHPG is used as support; it also acts as a reducing agent and stabilizer to promote the transformation of Pd^II to Pd⁰ nanoparticles. Also, this environmental friendly quasiheterogeneous catalyst is employed for the first time in the synthesis of new pyrimido[4,5‐b]indoles via oxidative addition/C? H activation reactions on the pyrimidine rings, which were obtained with higher yield and faster than when Pd(OAc)₂ was used as the catalyst. Interestingly, the above‐mentioned catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled several times with no significant decrease in the catalytic activity.     

Water‐Enhanced Synthesis of Higher Alcohols from CO2 Hydrogenation over a Pt/Co3O4 Catalyst under Milder Conditions

The effect of water on CO₂ hydrogenation to produce higher alcohols (C₂–C₄) was studied. Pt/Co₃O₄, which had not been used previously for this reaction, was applied as the heterogeneous catalyst. It was found that water and the catalyst had an excellent synergistic effect for promoting the reaction. High selectivity of C₂–C₄ alcohols could be achieved at 140 °C (especially with DMI (1,3‐dimethyl‐2‐imidazolidinone) as co‐solvent), which is a much lower temperature than reported previously. The catalyst could be reused at least five times without reducing the activity and selectivity. D₂O and ¹³CH₃OH labeling experiments indicated that water involved in the reaction and promoted the reaction kinetically, and ethanol was formed via CH₃OH as an intermediate.     

Eco‐friendly synthesis of 3,4‐dihydroquinoxalin‐2‐amine,diazepine‐tetrazole and benzodiazepine‐2‐carboxamide derivatives with the aid of MCM‐48/H5PW10V2O40

A heterogeneous material composed of MCM‐48/H₅PW₁₀V₂O₄₀ was produced and used as an efficient, eco‐friendly and highly recyclable catalyst for the one‐pot and multicomponent synthesis of 3,4‐dihydroquinoxalin‐2‐amine, diazepine‐tetrazole and benzodiazepine‐2‐carboxamide derivatives in aqueous media and at room temperature with high yields in short reaction times (40–60 min). The recoverable catalyst was easily recycled at least five times without any loss of catalytic activity. The structures of obtained products were confirmed using ¹H NMR and ¹³C NMR spectra.     

Synthesis of TiO2 on different substrates by chemical vapor deposition for photocatalytic reduction of Cr(VI) in water

TiO₂ loaded on several substrates such as carbon fiber, aluminum plate, silica plate, and glass plate was prepared using the chemical vapor deposition (CVD) method for the photocatalytic reduction of Cr(VI) in water with the presence of ethanol under Ultraviolet (UV) illumination. As‐prepared samples were characterized by X‐Ray Diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET), and scanning electron microscopy (SEM). The catalyst with TiO₂ loaded on carbon fiber possessed an extremely large surface area (1,463,91 m²/g), while the other catalysts possessed small surface areas (0.05–0.21 m²/g). The photocatalytic activity of TiO₂ loaded on carbon fiber, which was determined by the conversion of Cr(VI) and the degradation of chemical oxygen demand (COD), was much higher than that of other catalysts. The reusability of TiO₂ loaded on carbon fiber catalyst exhibited almost the same activity as the fresh catalyst. The results indicated that TiO₂ loaded on carbon fiber is feasible for practical application.     

Copolymerization of norbornene and 5‐norbornene‐2‐yl acetate using novel bis(β‐ketonaphthylamino)Ni(II)/B(C6F5)3/AlEt3 catalytic system

Vinyl‐type copolymerization of norbornene (NBE) and 5‐NBE‐2‐yl‐acetate (NBE‐OCOMe) in toluene were investigated using a novel homogeneous catalyst system based on bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. The copolymerization behavior as well as the copolymerization conditions, such as the levels of B(C₆F₅)₃ and AlEt₃, temperature, and monomer feed ratios, which influence on the copolymerization were examined. Without combination of AlEt₃, the catalytic bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃ exhibited very high catalyst activity for polymerization of NBE. Combination of AlEt₃ in catalyst system resulted in low conversion for polymerization of NBE. For copolymerization of NBE and NBE‐OCOMe, involvement of AlEt₃ in catalyst is necessary. Slight addition of NBE‐OCOMe in copolymerization of NBE and NBE‐OCOMe gives rise to significant increase of catalyst activity for catalytic system bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. Nevertheless, excess increase of the NBE‐OCOMe content in the comonomer feed ratios results in decrease of conversion as well as activity of catalyst. The achieved copolymers were confirmed to be vinyl‐addition copolymers through the analysis of FTIR, ¹H NMR, and ¹³C NMR spectra. ¹³C NMR studies further revealed the composition of the copolymer and the incorporation rate was 7.6–54.1 mol % ester units at a content of 30–90 mol % of the NBE‐OCOMe in the monomer feeds ratios. TGA analysis results showed that the copolymer exhibited good thermal stability (T_d > 410 °C) and failed to observe the glass transitions temperature over 300 °C. The copolymers are confirmed to be noncrystalline by WAXD analysis results and show good solubility in common organic solvents. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3990–4000, 2009     

Polysiloxane microspheres functionalized with imidazole groups as a palladium catalyst support

Polysiloxane microspheres containing a large number of silanol groups were obtained by an emulsion process of modified polyhydromethylsiloxane. N‐substituted imidazole groups were grafted on these microspheres by the silylation of their silanol groups with N‐[γ‐(dimethylchlorosilyl)propyl]imidazole hydrochloride. The progress of the reaction was monitored using ²⁹Si and ¹³C magic angle spinning (MAS) NMR and its impact on microsphere morphology was studied using scanning electron microscopy (SEM). The usefulness of the imidazole‐functionalized microspheres as a support for a metal catalyst was demonstrated by their reaction with PdCl₂(PhCN)₂. In this way a new heterogenized catalyst, Pd(II) complex with imidazole ligands supported on polysiloxane microspheres, was generated. This catalyst, MPd , was characterized using ¹³C and ²⁹Si MAS NMR, X‐ray photoelectron, Fourier transform infrared and far‐infrared spectroscopies, X‐ray diffraction, SEM–energy‐dispersive X‐ray spectroscopy and wide‐angle X‐ray scattering. The catalyst appears in two structures, as Pd(II) complex and Pd(0) nanoclusters. Its catalytic activity was tested using a model reaction, the hydrogenation of cinnamaldehyde, and compared with that of an analogous complex operating in a homogeneous system. MPd showed a high activity in the promotion of hydrogenation of cinnamaldehyde. The activity in the substrate conversion was stable at least in five cycles of this reaction. The main product was hydrocinnamaldehyde which could be obtained with a yield above 70%. A mechanism of the reaction is proposed. Copyright © 2016 John Wiley & Sons, Ltd.     

Ru (III) Schiff‐base complex anchored on nanosilica as an efficient and retrievable catalyst for hydration of nitriles

Transition metal catalyzed hydration of nitriles is an attractive methodology for amide synthesis, and hence recently attracted wide attention. It is one of the significant organic transformations as amides play a vital role in biological, pharmaceutical and industrial applications. In this work, we report the synthesis of a new solid supported Ru (III) Schiff base complex, Ru@imine‐nanoSiO₂ immobilized on nanosilica obtained from rice husk. The complex was characterized by FTIR, powder X‐ray diffraction, BET surface area measurement, UV–vis, SEM–EDX, TEM, ESR, X‐ray photoelectron spectroscopy and ICP‐AES analysis. Using Ru@imine‐nanoSiO₂ as the catalyst, the hydration of nitriles in i‐PrOH at 40 °C was studied which resulted in good isolated yields (60–99%). The catalyst can be recycled and reused up to 5^th cycle without any loss in activity. The products were characterized by FTIR, GC–MS and ¹H‐NMR spectroscopy and compared with authentic samples.     

Bifunctional Electrocatalysts for Overall Water Splitting from an Iron/Nickel‐Based Bimetallic Metal–Organic Framework/Dicyandiamide Composite

Pyrolysis of a bimetallic metal–organic framework (MIL‐88‐Fe/Ni)‐dicyandiamide composite yield a Fe and Ni containing carbonaceous material, which is an efficient bifunctional electrocatalyst for overall water splitting. FeNi₃ and NiFe₂O₄ are found as metallic and metal oxide compounds closely embedded in an N‐doped carbon–carbon nanotube matrix. This hybrid catalyst (Fe‐Ni@NC‐CNTs) significantly promotes the charge transfer efficiency and restrains the corrosion of the metallic catalysts, which is shown in a high OER and HER activity with an overpotential of 274 and 202 mV, respectively at 10 mA cm^?2 in alkaline solution. When this bifunctional catalyst was further used for H₂ and O₂ production in an electrochemical water‐splitting unit, it can operate in ambient conditions with a competitive gas production rate of 1.15 and 0.57 μL s^?1 for hydrogen and oxygen, respectively, showing its potential for practical applications.     

Sulfonated palladium(II) N‐heterocyclic carbene complex immobilized on nano–micro size poly(4‐vinylpyridinium chloride) for Suzuki‐Miyaura cross‐coupling reaction

The sulfonated palladium(II) N‐heterocyclic carbene complex Pd^II(NHC)SO₃^?, supported on poly(4‐vinylpyridinium chloride), was used as a heterogeneous, recyclable and active catalyst for the Suzuki–Miyaura reaction. This catalyst was applied for coupling of various aryl halides with phenylboronic acid and the corresponding products were obtained in excellent yields and short reaction times. The catalyst was characterized using Fourier transform infrared and diffuse reflectance UV–visible spectroscopies, scanning electron microscopy and elemental analysis. After each reaction, the catalyst was recovered easily by simple filtration and reused several times without significant loss of its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Cu(II) immobilized on mesoporous organosilica as an efficient and reusable nanocatalyst for one‐pot Biginelli reaction under solvent‐free conditions

Cu(II) immobilized on mesoporous organosilica nanoparticles (Cu²⁺@MSNs‐(CO₂^?)₂) has been synthesized, as a inorganic–organic nanohybrid catalyst, through a post‐grafting approach. Its characterization is carried out by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Energy dispersive X‐ray (EDX), Thermogravimetric/differential thermal analyses (TGA‐DTA), and Nitrogen adsorption–desorption analysis. Cu²⁺@MSNs‐(CO₂^?)₂ exhibits high catalytic activity in the Biginelli reaction for the synthesis of a diverse range of 3, 4‐dihydropyrimidin‐2(1H)‐ones, under mild conditions. The anchored Cu(II) could not leach out from the surface of the mesoporous catalyst during the reaction and it has been reused several times without appreciable loss in its catalytic activity.     

Synthesis,Characterization, Aggregation Properties,Antioxidant and Antimicrobial Activity of Novel Unmetalled and Metallophthalocyanines Bearing Coumarin Derivatives

In this study, novel Metal–free and metallophthalocyanines 3–10 were prepared by the cyclotetramerization of the new phthalonitriles 1–2 and the corresponding divalent metal salts. The novel phthalonitrile derivatives 1–2 were synthesized by the reaction between 4‐nitrophthalonitrile with 3‐hydroxycoumarin and 7‐hydroxycoumarin respectively in DMF in the presence of dry K₂CO₃ as base catalyst. The aggregation behavior of these compounds was investigated in different concentrations of DMSO for the Zn and Co phthalocyanines 5 , 9. In vitro antioxidant test method, namely diphenylpicrylhydrazyl radical scavenging activity, was used to determine the antioxidant activity of complexes 5–10 . In addition, these compounds were analyzed for their antibacterial activity against some bacteria by using the disk‐diffusion method. The compounds were characterized by spectral data (IR, UV–Vis, ¹H‐NMR and mass spectroscopies) as well as elemental analysis.     

Synthesis,characterization and catalytic application of a new organometallic oligomer based on polyhedral oligomeric silsesquioxane

Although homogeneous catalysts provide high performance and selectivity, the difficulty of separation and recycling of these catalysts has bothered the scientific community worldwide. Therefore, the demand for heterogeneous catalysts that possess the advantages of homogeneous ones, with ease of separation and recyclability remains a topic of major impact. The oligomeric catalyst synthesized in this work was characterized using elemental analysis, Fourier transform infrared, ¹³C NMR, ²⁹Si NMR and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy and Brunauer–Emmett–Teller analysis and compared to its homogeneous counterpart [W(CO)₃Br₂(ATC)] in the epoxidation of 1‐octene, cyclooctene, (S )‐limonene, cis ‐3‐hexen‐1‐ol, trans ‐3‐hexen‐1‐ol and styrene. The results showed that the percentage conversion for the homogeneous species [W(CO)₃Br₂(ATC)] was slightly higher than for the oligomeric catalyst (POSS‐ATC‐[W(CO)₃Br₂]). Furthermore, the selectivity for epoxide of the oligomeric catalyst was greater than that of the homogeneous catalyst by about 25% when (S )‐limonene was used. Great conversions (yields) of products were obtained with a wide range of substrates and the catalyst was recycled many times without any substantial loss of its catalytic activity.     

Catalyst Activation,Deactivation, and Degradation in Palladium‐Mediated Negishi Cross‐Coupling Reactions

Pd‐mediated Negishi cross‐coupling reactions were studied by a combination of kinetic measurements, electrospray‐ionization (ESI) mass spectrometry, ³¹P NMR and UV/Vis spectroscopy. The kinetic measurements point to a rate‐determining oxidative addition. Surprisingly, this step seems to involve not only the Pd catalyst and the aryl halide substrate, but also the organozinc reagent. In this context, the ESI‐mass spectrometric observation of heterobimetallic Pd–Zn complexes [L₂PdZnR]⁺ (L=S‐PHOS, R=Bu, Ph, Bn) is particularly revealing. The inferred presence of these and related neutral complexes with a direct Pd–Zn interaction in solution explains how the organozinc reagent can modulate the reactivity of the Pd catalyst. Previous theoretical calculations by González‐Pérez et al. (Organometallics­ 2012 , 31, 2053) suggest that the complexation by the organozinc reagent lowers the activity of the Pd catalyst. Presumably, a similar effect also causes the rate decrease observed upon addition of ZnBr₂. In contrast, added LiBr apparently counteracts the formation of Pd–Zn complexes and restores the high activity of the Pd catalyst. At longer reaction times, deactivation processes due to degradation of the S‐PHOS ligand and aggregation of the Pd catalyst come into play, thus further contributing to the appreciable complexity of the title reaction.     

Heterostructured Inter‐Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition‐metal‐oxides (TMOs)‐based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter‐doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm^?2 and a small Tafel slope of 23.5 mV dec^?1, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm^?2. As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm^?2 for alkaline overall water splitting.     

An Effective Pd–Ni2P/C Anode Catalyst for Direct Formic Acid Fuel Cells

The direct formic acid fuel cell is an emerging energy conversion device for which palladium is considered as the state‐of‐the‐art anode catalyst. In this communication, we show that the activity and stability of palladium for formic acid oxidation can be significantly enhanced using nickel phosphide (Ni₂P) nanoparticles as a cocatalyst. X‐ray photoelectron spectroscopy (XPS) reveals a strong electronic interaction between Ni₂P and Pd. A direct formic acid fuel cell incorporating the best Pd–Ni₂P anode catalyst exhibits a power density of 550 mW cm^?2, which is 3.5 times of that of an analogous device using a commercial Pd anode catalyst.     

Ni3FeN‐Supported Fe3Pt Intermetallic Nanoalloy as a High‐Performance Bifunctional Catalyst for Metal–Air Batteries

Electrocatalysts for both the oxygen reduction and evolution reactions (ORR and OER) are vital for the performances of rechargeable metal–air batteries. Herein, we report an advanced bifunctional oxygen electrocatalyst consisting of porous metallic nickel‐iron nitride (Ni₃FeN) supporting ordered Fe₃Pt intermetallic nanoalloy. In this hybrid catalyst, the bimetallic nitride Ni₃FeN mainly contributes to the high activity for the OER while the ordered Fe₃Pt nanoalloy contributes to the excellent activity for the ORR. Robust Ni₃FeN‐supported Fe₃Pt catalysts show superior catalytic performance to the state‐of‐the‐art ORR catalyst (Pt/C) and OER catalyst (Ir/C). The Fe₃Pt/Ni₃FeN bifunctional catalyst enables Zn–air batteries to achieve a long‐term cycling performance of over 480 h at 10 mA cm⁻² with high efficiency. The extraordinarily high performance of the Fe₃Pt/Ni₃FeN bifunctional catalyst makes it a very promising air cathode in alkaline electrolyte.     

Bifunctional Heterogeneous Catalysis of Silica–Alumina‐Supported Tertiary Amines with Controlled Acid–Base Interactions for Efficient 1,4‐Addition Reactions

We report the first tunable bifunctional surface of silica–alumina‐supported tertiary amines (SA–NEt₂) active for catalytic 1,4‐addition reactions of nitroalkanes and thiols to electron‐deficient alkenes. The 1,4‐addition reaction of nitroalkanes to electron‐deficient alkenes is one of the most useful carbon–carbon bond‐forming reactions and applicable toward a wide range of organic syntheses. The reaction between nitroethane and methyl vinyl ketone scarcely proceeded with either SA or homogeneous amines, and a mixture of SA and amines showed very low catalytic activity. In addition, undesirable side reactions occurred in the case of a strong base like sodium ethoxide employed as a catalytic reagent. Only the present SA‐supported amine (SA–NEt₂) catalyst enabled selective formation of a double‐alkylated product without promotions of side reactions such as an intramolecular cyclization reaction. The heterogeneous SA–NEt₂ catalyst was easily recovered from the reaction mixture by simple filtration and reusable with retention of its catalytic activity and selectivity. Furthermore, the SA–NEt₂ catalyst system was applicable to the addition reaction of other nitroalkanes and thiols to various electron‐deficient alkenes. The solid‐state magic‐angle spinning (MAS) NMR spectroscopic analyses, including variable‐contact‐time ¹³C cross‐polarization (CP)/MAS NMR spectroscopy, revealed that acid–base interactions between surface acid sites and immobilized amines can be controlled by pretreatment of SA at different temperatures. The catalytic activities for these addition reactions were strongly affected by the surface acid–base interactions.     

Cu‐Based Catalyst Resulting from a Cu,Zn,Al Hydrotalcite‐Like Compound: A Microstructural,Thermoanalytical, and In Situ XAS Study

A Cu‐based methanol synthesis catalyst was obtained from a phase pure Cu,Zn,Al hydrotalcite‐like precursor, which was prepared by co‐precipitation. This sample was intrinsically more active than a conventionally prepared Cu/ZnO/Al₂O₃ catalyst. Upon thermal decomposition in air, the [(Cu_0.5Zn_0.17Al_0.33)(OH)₂(CO₃)_0.17] ? mH₂O precursor is transferred into a carbonate‐modified, amorphous mixed oxide. The calcined catalyst can be described as well‐dispersed “CuO” within ZnAl₂O₄ still containing stabilizing carbonate with a strong interaction of Cu²⁺ ions with the Zn–Al matrix. The reduction of this material was carefully analyzed by complementary temperature‐programmed reduction (TPR) and near‐edge X‐ray absorption fine structure (NEXAFS) measurements. The results fully describe the reduction mechanism with a kinetic model that can be used to predict the oxidation state of Cu at given reduction conditions. The reaction proceeds in two steps through a kinetically stabilized Cu^I intermediate. With reduction, a nanostructured catalyst evolves with metallic Cu particles dispersed in a ZnAl₂O₄ spinel‐like matrix. Due to the strong interaction of Cu and the oxide matrix, the small Cu particles (7 nm) of this catalyst are partially embedded leading to lower absolute activity in comparison with a catalyst comprised of less‐embedded particles. Interestingly, the exposed Cu surface area exhibits a superior intrinsic activity, which is related to a positive effect of the interface contact of Cu and its surroundings.