Broadband dispersion-compensating photonic crystal fiber

We present a modified dual-core photonic crystal fiber, based on pure silica, with special grapefruit holes in the inner cladding. The fiber has large, broadband negative dispersion, and the dispersion value varies linearly from -380 t o-420 ps/(nm km) in the C band. To decrease the fabrication difficulty, large air holes are adopted. Furthermore, the chromatic dispersion of the fiber is not sensitive to the structure parameters. So the proposed fiber structure can greatly facilitate fiber drawing and can be used for broadband dispersion compensation.     

菱形纤芯光子晶体光纤色散与双折射特性分析

针对光子晶体光纤多零色散点、高双折射的应用要求, 设计了一种新型结构的光子晶体光纤, 其纤芯由位于菱形四个角上的圆形空气孔组成. 通过有限元数值分析方法对该种结构光子晶体光纤的色散特性和双折射特性进行数值仿真, 得到色散与波长、色散与纤芯圆孔尺寸、双折射与波长、双折射与纤芯圆孔尺寸的关系. 研究结果表明:在满足光纤传输功率要求的条件下, 光纤的双折射在d₁<0.8 μupm 时的性能较好. 同时, 该种结构的光子晶体光纤在芯区直径满足d₁=0.4 μupm或 d₁=0.6 μupm时会出现两个零色散点, 这对进一步研制具有多零色散点的光子晶体光纤具有重要的意义.     

Designing of a polarization beam splitter for the wavelength of 1310 nm on dual-core photonic crystal fiber with high birefringence and double-zero dispersion

We have proposed a novel kind of photonic crystal fiber which contains two asymmetric cores. The bireti＇ingence and the dispersion are numerically analyzed based on finite element method when the size of the air holes and the pitch of two adjacent air holes are changed. It is shown that the proposed photonic crystal fiber has high birefringence up to the order of 10-2 and double-zero dispersion points are at the wavelengths of 1310 nm and 800 rim, simultaneously. At the same time, the normalized power and the extinction ratios of the proposed photonic crystal fiber have been simulated. It is demonstrated that, at the wavelength of 1310 rim, the x-polarized mode and the y-polarized mode are separated when the propagation distance is 2.481 ram.     

PCFDT: An accurate and friendly photonic crystal fiber design tool

This paper presents PCFDT, which is an accurate and friendly photonic crystal fiber design tool based on full-vectorial finite element method. Photonic crystal fibers based on circular and non-circular microstructured holes, and on different propagation mechanisms have been analyzed. Comparisons with other numerical methods and experimental results have shown excellent agreement. The design tool validation includes experimental results of hybrid photonic crystal fibers, proposed by us, which made possible for the first time light be simultaneously confined and manipulated by two propagation mechanism, total internal reflection and photonic bandgap effect.     

Photonic crystal fiber based evanescent-wave sensor for detection of biomolecules in aqueous solutions

We demonstrate highly efficient evanescent-wave detection of fluorophore-labeled biomolecules in aqueous solutions positioned in the air holes of the microstructured part of a photonic crystal fiber. The air-suspended silica structures located between three neighboring air holes in the cladding crystal guide light with a large fraction of the optical field penetrating into the sample even at wavelengths in the visible range. An effective interaction length of several centimeters is obtained when a sample volume of less than 1 microL is used.     

基于布里渊动态光栅的高灵敏度静压力传感器设计

设计了一种新型边孔型保偏光子晶体光纤,在包层中对称地引入两个大空气孔,纤芯区域与大空气孔之间仅有一层小空气孔。由平面应变假设将该模型进行二维简化,利用有限元法对该光纤的二维模型进行数值分析,通过计算不同温度和静压力下的双折射频移以研究其温度和静压力传感特性。研究表明,在较大静压力和温度范围内,该保偏光子晶体光纤无需掺杂任何应力材料就可以实现?2.1353 GHz/MPa的静压力灵敏度且具有温度不敏感性,其温度灵敏度仅为+0.1542 MHz/℃。另外,还对该光子晶体光纤的光学特性进行了分析,其满足单模传输条件、具有较小的限制性损耗和较大的有效模场面积。由于具有体积小、与其他光纤兼容度强、静压力灵敏度高、温度不敏感的特性,其在温度变化不定、静压力改变区间较大的环境中静压力精确测量的优势比较明显,较好的光学特性使其在油井、土木的监测应用等方面有着重要参考价值。     

光子晶体光纤布拉格光栅传输谱特性的分析

研究光子晶体光纤中光纤光栅的传输谱特性对于研制基于光子晶体光纤的光纤光栅器件有着重要的意义。结合耦合模理论和光束传输相关函数方法,对一种典型光子晶体光纤中的布拉格光栅(FBG)传输谱进行了理论分析。比较了光子晶体光纤中布拉格光栅与常规布拉格光栅的传输谱。数值分析了光纤截面结构变化对于光栅传输谱的影响,并给出这种影响的定性解释。计算结果显示,与常规光纤光栅相比,包层模共振引起的损耗峰与正反向纤芯模耦合引起的损耗峰可以相比拟,而包层模共振的间隔也比常规光纤中光纤光栅的包层模共振间隔要大。同时给出了晶体光纤截面上空气孔的占空比,空气孔的排布层数对于传输谱影响的规律。     

Design of the novel steering-wheel micro-structured optical fibers sensor based on evanescent wave of terahertz wave band

In this paper, we present design of a hollow micro-structured photonic crystal fiber with novel steering-wheel pattern of noncircular large holes in cladding as platform for evanescent-field sensing. Based on simulation, confinement loss is less than 0.007 dB/m, and 72% of light intensity overlaps in noncircular large air holes is obtained when the incident wave frequency is 1 THz, and the nonlinear effects of the short-distance transmission are very small simultaneously. The critical value of confinement losses increases with the structure parameters. As for ultra-low loss and high sensitivity of the model, the novel steering-wheel structured fiber is well suited for evanescent-field sensing and detection of chemical and biological products.     

Tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber

Optical fiber temperature sensors have been widely employed in enormous areas ranging from electric power industry, medical treatment, ocean dynamics to aerospace. Recently, graphene optical fiber temperature sensors attract tremendous attention for their merits of simple structure and direct power detecting ability. However, these sensors based on transfer techniques still have limitations in the relatively low sensitivity or distortion of the transmission characteristics, due to the unsuitable Fermi level of graphene and the destruction of fiber structure, respectively. Here, we propose a tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber (Gr-PCF) with the non-destructive integration of graphene into the holes of PCF. This hybrid structure promises the intact fiber structure and transmission mode, which efficiently enhances the temperature detection ability of graphene. From our simulation, we find that the temperature sensitivity can be electrically tuned over four orders of magnitude and achieve up to ～ 3.34×10^-3 dB/(cm·℃) when the graphene Fermi level is ～ 35 meV higher than half the incident photon energy. Additionally, this sensitivity can be further improved by ～ 10 times through optimizing the PCF structure (such as the fiber hole diameter) to enhance the light-matter interaction. Our results provide a new way for the design of the highly sensitive temperature sensors and broaden applications in all-fiber optoelectronic devices.     

Silica-air photonic crystal fiber design that permits waveguiding by a true photonic bandgap effect

A theoretical investigation of a novel type of optical fiber is presented. The operation of the fiber relies entirely on wave guidance through the photonic bandgap effect and not on total internal reflection, thereby distinguishing that fiber from all other known fibers, including recently studied photonic crystal fibers. The novel fiber has a central low-index core region and a cladding consisting of a silica background material with air holes situated within a honeycomb lattice structure. We show the existence of photonic bandgaps for the silica-air cladding structure and demonstrate how light can be guided at the central low-index core region for a well-defined frequency that falls inside the photonic bandgap region of the cladding structure.     

Slow light performance enhancement of graphene-based photonic crystal waveguide

We propose a graphene-based photonic crystal (PC) slow light waveguide, which is realized by creating periodical air holes in a silicon layer to achieve spatially varying chemical potentials of graphene. The structure is optimized around 30 THz, and a large group index of 166.6 is obtained, with a very low propagation loss of ?2.1 dB/um. The corresponding normalized delay-bandwidth product reaches as high as 4.00. Furthermore, the slow light performance can be dynamically tuned by changing a bias voltage. The center frequency of the slow light waveguide can be tuned between 19.1 THz and 27.4 THz. Our results suggest that graphene-based PC structures are very promising for slow light devices.     

Research on terahertz photonic crystal fiber characteristics with high birefringence

A new high birefringence photonic crystal fiber is proposed within the terahertz frequency region. It has two types of claddings, the inner is composed of six ellipse air holes arranged in a honeycomb array and the outer surrounded by circle holes. By using the full vector finite element method with anisotropic perfectly matched layers absorption boundary condition, the birefringence, chromatic dispersion and confinement loss of the fundamental mode are evaluated. The results show that the birefringence can achieve 10⁻³ when the wavelength increases from 600 μm to 900 μm. This structure will provide some reference value for the designing of high birefringence terahertz photonic crystal fiber.     

聚合物光子晶体光纤作为新型传像光纤应用的初步探索

制备了两种具有传像功能的聚合物光子晶体光纤.该光纤分别由525个空气孔按四方排列和由547个空气孔按六方排列的二维光子晶体聚合物光纤组成.实验结果表明：在短距离内,这两种光纤可以以抗传导的机理传送图像,且制备工艺简单,单根光纤就带有数百个像素,可用于制造集成光学器件.     

雪花形晶芯光子晶体光纤

设计一种新型光子晶体光纤，可在300 nm带宽范围内实现近零超平坦色散特性.光纤端面上所有空气孔按照通常的三角形规则均匀排列，中央位置十三个排列成雪花形的空气孔小于其它空气孔，这些孔共同构成光纤的纤芯.这类晶芯型光子晶体光纤与传统光子晶体光纤相比具有较大的模场面积，尤其是，通过最佳化匹配晶芯和包层中的空气孔大小可以在300 nm带宽范围内实现超平坦化色散特性，甚至可得到近零色散的平坦化色散曲线。尽管光纤的晶芯为雪花状，但近场很快会演化为类高斯型场分布.     

Challenges and Solutions in Fabrication of Silica-Based Photonic Crystal Fibers: An Experimental Study

Abstract

The fabrication process of photonic crystal fibers based on a stack-and-draw method is presented in full detail in this article. In addition, improved techniques of photonic crystal fiber preform preparation and fabrication are highlighted. A new method of connecting a handle to a preform using only a fiber drawing tower is demonstrated, which eliminates the need for a high-temperature glass working lathe. Also, a new technique of modifying the photonic crystal fiber structural pattern by sealing air holes of the photonic crystal fiber cane is presented. Using the proposed methods, several types of photonic crystal fibers are fabricated, which suggests potential for rapid photonic crystal fibers fabrication in laboratories equipped with and limited to only a fiber drawing tower.     

光子晶体光纤包层可见光及红外宽带色散波产生

对光子晶体光纤包层3个空气孔之间节区的传光特性进行了分析, 对比了纤芯与包层节区传光的模场面积、非线性系数及色散特性, 得到光子晶体光纤包层节区具有小芯、高非线性的特点.在包层空气孔较大的情况下, 得到了双零色散曲线.根据色散曲线, 分析了色散波产生的相位匹配特性, 得到了色散波中心波长随抽运波长及功率的变化规律.制备出了所设计的光子晶体光纤, 实验得到了在可见光及红外大于300 nm的宽带色散波, 并给出了色散波随抽运波长及功率的变化规律.实验和理论分析结果一致, 为波长变换及超连续宽带光源的研究奠定了基础. 关键词： 光子晶体光纤 色散波 相位匹配 非线性     

Fiber in-line Mach-Zehnder interferometer constructed by selective infiltration of two air holes in photonic crystal fiber

A fiber in-line Mach-Zehnder interferometer is fabricated through selective infiltrating of two adjacent air holes of the innermost layer in the solid core photonic crystal fiber, assisted by femtosecond laser micromachining. The liquid infiltrated has higher refractive index than that of the background silica, and, hence, the two rods created can support a guide mode with lower effective refractive index than that of silica. The interference is produced by the fiber fundamental mode and the guide mode. The free spectral range (FSR) of the interferometer is found to be dependent on the photonic crystal fiber length, and a large FSR corresponds to a short photonic crystal fiber length. Such an interferometer device is robust and exhibits extremely high temperature sensitivity (～7.3?nm/°C for the photonic crystal fiber length of 3.4?cm) and flexible operation capability.     

热激法光子晶体光纤光栅制备工艺中热传导特性研究

研究了基于结构性改变的光子晶体光纤光栅的热激法制备工艺,理论分析了此种工艺的成栅原理,采用热传导理论和有限元法研究了制备过程中光子晶体光纤中的温度场分布,以及包层空气孔结构和激光参数对成栅效果的影响.研究结果表明,利用光子晶体光纤包层空气孔周期性塌缩可以形成光栅;采用两点热激法时,能够实现能量在光纤径向均匀分布,轴向近似于高斯分布;包层气孔结构加速了成栅过程,相同光斑尺寸下,光纤塌缩所需激光功率随气孔层数和气孔半径的增大而减小;最后,对包层空气孔结构为1层到7层的光子晶体光纤热激过程进行仿真,得到了空气填 关键词： 光纤光栅 光子晶体光纤 热激法 有限元法     

应用于液压传感的光子晶体光纤特性

为实现结构紧凑、高灵敏度的光纤压力(液压)传感器,提出了一种应用于液压传感的边孔结构光子晶体光纤.基于全矢量有限元方法,研究了传统光子晶体光纤和边孔结构光子晶体光纤的有效折射、模式等特性以及在液压情况下的应力和应力特性.根据光弹效应给出了传统光子晶体光纤和边孔结构光子晶体光纤在液压情况下的折射率变化特性.模拟结果表明边孔结构光子晶体光纤可以获得更大的液压传感灵敏度,增大边孔半径可以提高液压传感灵敏度,因此结构优化的边孔结构光子晶体光纤可以实现高灵敏度的光纤压力(液压)压力传感器.     

应用于液压传感的光子晶体光纤特性

为实现结构紧凑、高灵敏度的光纤压力(液压)传感器,提出了一种应用于液压传感的边孔结构光子晶体光纤.基于全矢量有限元方法,研究了传统光子晶体光纤和边孔结构光子晶体光纤的有效折射、模式等特性以及在液压情况下的应力和应力特性.根据光弹效应给出了传统光子晶体光纤和边孔结构光子晶体光纤在液压情况下的折射率变化特性.模拟结果表明边孔结构光子晶体光纤可以获得更大的液压传感灵敏度,增大边孔半径可以提高液压传感灵敏度,因此结构优化的边孔结构光子晶体光纤可以实现高灵敏度的光纤压力(液压)压力传感器.