反式钙钛矿电池超薄空穴传输层研究进展

空穴传输层(HTLs)厚度对反式钙钛矿太阳能电池(PSCs)性能具有重大影响,因其显著影响太阳光透过和HTLs的空穴传输性能。几个纳米至十几个纳米厚度的超薄HTLs在减少伴生吸收、电荷传输损失和材料消耗等方面具有明显优势。目前,有许多成熟的制备超薄无机HTLs的方法,并在反式和叠层PSCs中得到广泛研究与应用。最近,一些关于有机超薄HTLs的新型制备方法也展现出良好的性能并逐渐引起相关领域研究者关注。在此,本文主要总结反式PSCs中超薄HTLs的研究进展与应用,关注其未来发展的挑战和方向,为该领域进一步的研究提供参考。     

Study of interface properties in CuPc based hybrid inorganic-organic solar cells

Metal-substituted phthalocyanine thin films such as copper-phthalocyanine (CuPc) are often used as photo-active and hole transporting layers (HTLs) in fully organic photovoltaic devices. In this work, CuPc is vacuum sublimated on an electron acceptor layer of mesoporous titania (TiO(2)) for the formation of hybrid TiO(2):CuPc solar cell devices. The performance of these hybrid solar cell devices was demonstrated without and with dye sensitization at the TiO(2):CuPc interface. The charge separation and photocurrent contribution at the interfaces in these multilayer hybrid devices was studied by using a variety of optoelectrical and photophysical characterization techniques. It is important to understand the fundamental interface properties of these multilayer hybrid solar cell devices for optimized performance.     

钙钛矿太阳能电池电子传输层的制备及应用

目前,有机-无机杂化钙钛矿太阳能电池(PSC)的器件效率已经超过25％.电子传输层作为PSC中的重要组成部分在提取和传输光生电子,阻挡空穴,修饰界面,调节界面能级和减少电荷复合等方面起着关键作用.无机n型材料,例如TiO2、ZnO、SnO2和其他金属氧化物材料具有成本低和稳定性好的特点,经常在传统PSC中被用作电子传输...     

含1，3，4-NFDA1二唑环系的电致发光材料的研究进展

1 ,3,4 二唑环系是一个缺电子的基团和很弱的空穴接受体 ,含有 1 ,3,4 二唑单元的化合物是一类具有良好电子传输功能的电致发光材料。本文对含有 1 ,3,4 二唑单元的有机小分子和高分子型电致发光材料的近期进展作了综述 ,而且在这类材料的分子设计方面也作了简要的展望     

Self-doped n-type small molecular electron transport materials for high-performance organic solar cells

Two naphthalene diimide (NDI) and perylene diimide (PDI) based n-type water/alcohol soluble small molecules (NFN and PFP) are designed and utilized as electron transport layers (ETLs) for organic solar cells (OSCs). NFN and PFP are synthesized by using Sonogashira coupling from alkynyl modified fluorene with mono-bromo substituted NDI and PDI. Density functional theory study results of NFN and PFP show that they possess excellent planarity due to the employment of triple bonds as connection units. Moreover, it was shown by electron paramagnetic resonance study that both NFN and PFP possess obvious self-doping behaviors, which may effectively enhance their charge transporting capability as ETLs in OSCs. Power conversion efficiencies of 8.59% and 9.80% can be achieved for OSCs with NFN and PFP as ETLs, respectively. The higher power conversion efficiency (PCE) of PFP based photovoltaic device is originated from the stronger doping property and higher mobility of PFP.     

Molecular Aggregation of Naphthalene Diimide(NDI) Derivatives in Electron Transport Layers of Inverted Perovskite Solar Cells and Their Influence on the Device Performance

One of key factors to design applicable electron transport layers (ETLs) for perovskite solar cells is the morphology of ETLs since a good morphology would help to facilitate the carrier transport at two interfaces (perovskite\ETL and ETL\cathode). However, one drawback of most organic ETL small molecules is the internal undesired accumulation, which would cause the formation of inappropriate morphology and rough ETL surface. Here, by elaborately designing the side chains of NDI derivatives, the molecular interaction could be modified to achieve the aggregation in different degrees, which would eventually affect the accumulation of molecules and surface qualities of ETLs. By speculating from the comparison between the absorption spectra of solutions and films, the sequence of extent of molecule interaction and aggregation was built among three NDI derivatives, which is further confirmed by direct evidence of atomic force microscopy (AFM) images. Then, carrier exaction abilities are simply studied by steady‐state photoluminescence spectroscopy. The carrier transport process is also discussed based on cyclic voltammetry, time‐resolved photoluminescence spectroscopy and mobility. NDIF1 are proven to have the appropriate internal aggregation to smooth the contact with cathode and low series resistance, and a device performance of 15.6 % is achieved. With the ability of preventing the thermal diffusion of Ag towards the perovskite surface due to the strong interaction between molecules, NDIF2 at high concentration shows the highest fill factor (80 %).     

聚苯基喹噁啉的研究与应用进展

聚苯基喹噁啉(PPQ)是一类重要的热塑性芳杂环聚合物材料。苯基取代喹噁啉环赋予了PPQ优良的耐热稳定性、耐水解性以及在有机溶剂中良好的溶解性。本文综述了近年来国内外在PPQ材料基础研究与应用领域内的最新进展情况,从四酮单体的合成、PPQ的合成以及在高技术领域中的应用等角度进行了阐述。着重介绍了PPQ在集成电路层间介质材料、先进显示用电子传输材料以及燃料电池质子交换膜材料中的应用,最后结合作者的研究工作对PPQ材料在未来高技术领域中的应用前景进行了展望。     

Alkali metal salts doped pluronic block polymers as electron injection/transport layers for high performance polymer light-emitting diodes

A series of alkali metal salts doped pluronic block copolymer F127 were used as electron injection/transport layers (ETLs) for polymer light-emitting diodes with poly[2-(4-(3′,7′-dimethyloctyloxy)-phenyl)-p-phenylenevinylene] (P-PPV) as the emission layer. It was found that the electron transport capability of F127 can be effectively enhanced by doping with alkali metal salts. By using Li2CO3 (15%) doped F127 as ETL, the resulting device exhibited improved performance with a maximum luminous efficiency (LE) of 13.59 cd/A and a maximum brightness of 5529 cd/m2, while the device with undoped F127 as ETL only showed a maximum LE of 8.78 cd/A and a maximum brightness of 2952 cd/m2. The effects of the doping concentration, cations and anions of the alkali metal salts on the performance of the resulting devices were investigated. It was found that most of the alkali metal salt dopants can dramatically enhance the electron transport capability of F127 ETL and the performance of the resulting devices was greatly improved.     

Electron transporting semiconducting polymers in organic electronics

Significant progress has been achieved in the preparation of semiconducting polymers over the past two decades, and successful commercial devices based on them are slowly beginning to enter the market. However, most of the conjugated polymers are hole transporting, or p-type, semiconductors that have seen a dramatic rise in performance over the last decade. Much less attention has been devoted to electron transporting, or n-type, materials that have lagged behind their p-type counterparts. Organic electron transporting materials are essential for the fabrication of organic p-n junctions, organic photovoltaic cells (OPVs), n-channel organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs) and complementary logic circuits. In this critical review we focus upon recent developments in several classes of electron transporting semiconducting polymers used in OLEDs, OFETs and OPVs, and survey and analyze what is currently known concerning electron transporting semiconductor architecture, electronic structure, and device performance relationships (87 references).     

Recent advancement in inorganic-organic electron transport layers in perovskite solar cell: current status and future outlook

Organic-inorganic lead halide perovskite solar cells have captured significant attention in recent years due to low processing costs and unprecedented development in power conversion efficiency (PCE). It has appeared from 2009 with PCE of 3.8% to being claimed more than 25.2% PCE in a very short span of time, showing their future prospective toward the fabrication of less expensive and stable solar cells. The incredible advancement in this technology encourages at one end, whereas several hurdles restricting its complete utilization for commercial purposes at another end. Although the selection of perovskite structure is limited with planar and mesoporous electron transport layers (ETLs), but identification of appropriate ETLs necessitates excellent effort to improve the surface morphology of absorber and obtain enhanced PCE with higher stability. In the present review, we have investigated various inorganic-organic ETLs with different device configurations of PSCs, primarily focusing on crystallization and morphology control techniques of ETL thin films. Numerous strategies such as surface functionalization, doping, and addition of interfacial layer are adopted for ETLs, and their effect on device efficiency, performance, and hysteresis is also discussed in detail. Additionally, designs of PSCs with different device configurations are discussed as well, providing future guidelines for significant progress in PSCs structure with different ETLs.     

Synthesis,characterization, and electroluminescence of PPV copolymers containing electron and hole‐transporting units

Three series of poly(phenylene vinylene) (PPV) derivatives containing hole‐transporting triphenylamine derivatives [N‐(4‐octoxylphenyl)diphenylamine, N,N′‐di(4‐octyloxylphenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine, and N,N′‐di(4‐octoxylphenyl)‐N,N′‐diphenylbenzidine] (donor) and electron‐transporting oxadiazole unit (2,5‐diphenyl‐1,3,4‐oxadiazole) (acceptor) in the main chain were synthesized by improved Wittig copolymerization. The resulting donor–acceptor (D‐A) polymers are readily soluble in common organic solvents, such as chloroform, dichloroethane, THF, and toluene. The polymers containing oxadiazole group exhibit good thermal stability with 5% weight loss above 400 °C. The intramolecular charge‐transfer was observed in these D‐A polymers. In comparison with corresponding polymers without oxadiazole unit, the single‐layer devices based on the D‐A polymers showed much improved electroluminescent properties, because of the balanced charge injection and transport. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1566–1576, 2008     

聚对苯撑乙烯类电致发光材料研究进展

从聚合物结构修饰、复合/共混以及合成工艺等方面概述了近十多年来聚对苯撑乙烯衍生物的研究进展和发展趋势.为获得高效、稳定、可溶的PPVs型有机光电材料,可通过引入吸电子基团(如氟原子、氰基、含氮杂环等)等对其结构进行修饰来改善其平衡电荷传输的能力进而提高其发光效率;同时,通过引入长链取代基和液晶单元结构来兼顾聚合物的溶解性和稳定性,以提高材料的可加工性和器件的稳定性.通过复合/共混可以控制聚合物膜的聚集态来提高发光效率.     

Thermal stability of organic electroluminescent devices fabricated using novel charge transporting materials

Novel hole and electron transporting materials have been synthesized to improve the thermal stability of organic electroluminescent (EL) devices. Molecular structures of such hole and electron transporting materials were designed based on triphenylamine (TPA) and oxadiazole (OXD) moieties, respectively. It has been found that the resulting materials have high glass transition temperatures (Tg) over 100°C and the vacuum-deposited thin films are significantly thermally stable. For the two-layer EL devices using the novel hole transporting materials and the typical emitting material, tris(8-quinolinolato) aluminum, the thermal stability has been clearly seen to depend on the Tg of the hole transporting material; excellent thermal stability was achieved. For the three-layer EL device using the novel electron transporting material, good emission efficiency and good stability were achieved. The electron transporting materials have been also applied to the polymeric system with polyvinylcarbazole matrix.     

掺杂发光有机电致磷光器件工作原理及主体材料

本文总结了基于掺杂发光的有机电致磷光器件(PhOLED)中磷光材料被激发的途径及机理,并指出不同主体材料对器件性能的不同影响.全面介绍了小分子主体材料研究的新进展及它们在PhOLEDs器件中的运用.比较和讨论了基于各种不同性质主体材料的器件性能,指出主体材料选择策略.同时讨论了各类主体材料的分子结构、热稳定性、三线态能级、载流子迁移率及HOMO/LUMO能级之间的关系,揭示了上述特性对器件性能影响.     

Efficient Hole‐Transporting Materials with Triazole Core for High‐Efficiency Perovskite Solar Cells

Efficient hole‐transporting materials (HTMs), TAZ‐[MeOTPA]₂ and TAZ‐[MeOTPATh]₂ incorporating two electron‐rich diphenylamino side arms, through direct linkage or thiophen bridges, respectively, on the C3‐ and C5‐positions of a 4‐phenyl‐1,2,4‐triazole core were synthesized. These synthetic HTMs with donor–acceptor type molecular structures exhibited effective intramolecular charge transfer for improving the hole‐transporting properties. The structural modification of HTMs by thiophene bridging might increase intermolecular π–π stacking in the solid state and afford a better spectral response because of their increased π‐conjugation length. Perovskite‐based cells using TAZ‐[MeOTPA]₂ and TAZ‐[MeOTPATh]₂ as HTMs afforded high power conversion efficiencies of 10.9 % and 14.4 %, respectively, showing a photovoltaic performance comparable to that obtained using spiro‐OMeTAD. These synthetically simple and inexpensive HTMs hold promise for replacing the more expensive spiro‐OMeTAD in high‐efficiency perovskite solar cells.     

Electroluminescent properties of anthracene‐containing polyimides

Optical and electroluminescent properties of a new soluble anthracene‐containing polyimide (ACPI) was studied. Solubility of ACPI in organic solvents allows direct spin casting of the polymer films exhibiting intense photo‐ and electroluminescence (EL) in the visible range. This non‐conjugated polymer was used as emitting and electron‐hole transporting layers in polymer light‐emitting devices (LEDs). EL properties of the uni‐ and bilayer LEDs are discussed in terms of the band structure, bipolar transport and electron donor‐acceptor interactions. Copyright © 2000 John Wiley & Sons, Ltd.     

Copolyphenylenes with pendant benzimidazolyl and diethanolaminohexyloxy groups: Synthesis and electron‐transporting application in PLEDs

Two new electron‐transporting copolyphenylenes P1NH and P2NH possessing balanced charges crucial to emission efficiency of polymer light‐emitting diodes (PLEDs) have been synthesized and applied as an electron‐transporting layer (ETL). The main chain structure is all para‐linkage for P1NH and both para‐ and meta‐linkage for P2NH , with the same pendant electron‐withdrawing benzimidazolyl and polar diethanolaminohexyloxy groups. Both copolymers possess excellent thermal stability (T _d > 300 °C, T _g > 100 °C) due to their rigid backbones. In addition, the pendant groups effectively lower LUMO (～ ?2.70 eV) and HOMO (～ ?5.70 eV) levels, resulting in improved electron‐transporting and hole‐blocking capabilities. Multilayer yellow‐emitting PLEDs with a configuration of ITO/PEDOT:PSS/SY/ETL/LiF/Al were successfully fabricated by the spin‐coating process. The maximum luminance and maximum current efficiency of the P1NH ‐based device were 12,881 cd/m² and 10.94 cd/A, respectively, superior to the performance of P2NH ‐based device (4938 cd/m², 3.70 cd/A) and the device without ETL (8690 cd/m², 2.78 cd/A). Current results indicate that P1NH is highly effective in enhancing electron transport and device performance. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2494–2505     

Recent progress in lithium-ion and lithium metal batteries

Moving towards carbon-free energy and global commercialization of electric vehicles stimulated extensive development in the field of lithium-ion batteries (LIBs), and to date, many scientific and technological advances have been achieved. The number of research works devoted to developing high-capacity and stable materials for lithium- ion and lithium metal batteries (LMBs) is constantly rising. This review covers the main progress in the development of LIBs and LMBs based on research works published in 2021. One of the main goals in the recent publications is to solve the problem of instability of layered nickel-rich lithium– nickel–cobalt–manganese oxides (Ni-rich NMC) cathodes, as well as silicon anodes. Improving the stability of NMC cathodes can be achieved by doping them with cations as well as by coating the oxides’ surfaces with protective layers (organic polymers and inorganic materials). The most effective strategies for dampening volumetric changes in silicon anodes include using porous silicon structures, obtaining composites with carbon, coating silicon-containing particles with inorganic or polymeric materials, and replacing standard binder materials. Much work has been devoted to suppressing dendrite formation in LMBs by forming stable coating layers on the surface of lithium metal, preparing composite anodes and alloys, and changing the composition of electrolytes. At the same time, in the field of electrolyte development, many research works have been devoted to the search for new hybrid polymer electrolytes containing lithium-conducting inorganic materials.     

Co-La-Based Hole-Transporting Layers for Binary Organic Solar Cells with 18.82 % Efficiency

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is a widely used hole transporting layer (HTL) in organic solar cells (OSCs), but its acidity severely reduces the stability of devices. Until now, very few HTLs were developed to replace PEDOT:PSS toward stable and high-performance OSCs. Herein, a new cobalt-lanthanum (Co-La) inorganic system was reported as HTL to show a high conversion efficiency (PCE) of 18.82 %, which is among the top PCEs in binary OSCs. Since electron-rich outer shell of La atom can interact with Co atom to form charge transfer complex, the work function and conductivity of the Co-La system could be simultaneously enhanced compared to Co or La-based HTLs. This Co-La system could also be applied into other OSCs to show high performance. All these results demonstrate that binary Co-La systems as HTL can efficiently tackle the issue in hole transporting and show powerful application in OSCs to replace PEDOT:PSS.     

Bending-stability Interfacial Layer as Dual Electron Transport Layer for Flexible Organic Photovoltaics

The flexibility of organic photovoltaics (OPVs) has attracted worldwide attention in recent years.To realize the bending-stability of OPVs,it is necessary to put forward the bending-stability of interracial layer.A novel bendable composite is explored and successfully applied as an electron transport layer (ETL) for fully-flexible OPVs.We incorporated poly(vinylpyrrolidone)(PVP) into conjugated electrolytes (CPE) to composite a bendable ETL for high-performance OPVs devices.Fortunately,the devices based on PVP-modified CPE exhibited better device performances and more excellent mechanical properties of bendability.The fullerene-free OPVs based on PM6:IT-4F with CPE@PVP as ETLs yield the best power conversion efficiency (PCE) of 13.42％.Moreover,a satisfying efficiency of 12.59％ has been obtained for the fully-flexible OPVs.As far as we know,this is one of the highest PCE for fully-flexible OPV based PM6:IT-4F system.More importantly,the flexible OPVs devices can retain more than 80％ of its initial efficiency after 5000 bending cycles.Furthermore,among various curvature radii,the mechanical properties of the device based on CPE@PVP are superior to those of the device based on bare CPE as ETL.These findings indicate that the functional flexibility of CPE as a cathode interfacial layer is an effective strategy to fabricate high-performance flexible devices in the near future.