(4-羟基苯基)甲基苄基硫鎓六氟锑酸盐的合成及表征

以4-羟基苯硫酚和氯苄为原料、三乙胺为缚酸剂,制备了4-苄硫基苯酚;4-苄硫基苯酚在甲苯溶液中,经硫酸二甲酯甲基化制备了（4-羟基苯基）甲基苄基硫鎓硫酸盐;室温甲醇溶剂中,与六氟锑酸钠离子进行交换合成了目的产物（4-羟基苯基）甲基苄基硫鎓六氟锑酸盐。通过紫外光谱和核磁共振测定,对产物进行了结构鉴定。总收率大于75%。     

光引发剂(4-甲苯基)(4-异丁基苯基)碘鎓六氟磷酸盐的合成研究

以对甲苯胺为原料,经重氮化、KI分解得到对-碘甲苯.在NH4Cl存在下,对-碘甲苯在过硫酸铵的氧化下与异丁苯反应,得到(4-甲苯基)(4-异丁基苯基)碘鎓氯.在丙酮溶剂中,(4-甲苯基)(4-异丁基苯基)碘鎓氯与六氟磷酸钾进行离子交换,得到目的产物(4-甲苯基)(4-异丁基苯基)碘鎓六氟磷酸盐.总收率为46.7%.通过紫外光谱、红外光谱和核磁共振测定,对产物进行了结构确证.     

光引发剂(4-甲苯基)(4-异T基苯基)碘鎓六氟磷酸盐的合成研究

以对甲苯胺为原料,经重氮化、KI分解得到对-碘甲苯.在NH4Cl存在下,对-碘甲苯在过硫酸铵的氧化下与异丁苯反应,得到(4-甲苯基)(4-异丁基苯基)碘鎓氯.在丙酮溶剂中,(4-甲苯基)(4-异丁基苯基)碘鎓氯与六氟磷酸钾进行离子交换,得到目的产物(4-甲苯基)(4-异丁基苯基)碘鎓六氟磷酸盐.总收率为46.7%.通过...     

大分子阳离子光引发剂聚苯乙烯-碘鎓六氟锑酸盐的合成及其感光性能的研究

本文用羟基对甲苯磺酰氧基碘苯与聚苯乙烯进行亲电取代反应,得到大分子阳离子碘鎓盐光引发剂聚苯乙烯碘鎓-六氟锑酸盐(PS-I·SbF₆).用核磁共振仪、傅立叶红外光谱仪、凝胶渗透色谱仪、差示扫描量热仪、紫外分光光度仪对其进行了表征.与小分子碘鎓盐系光引发剂相比,PS-I·SbF₆的紫外最大吸收波长λ_max红移,在240-270 nm范围内有较强的吸收;固化成膜后其相对迁移率较小分子光引发剂有显著下降.初步研究了PS-I·SbF₆在环氧体系中的光固化性能,结果表明该体系有较好的光固化和后固化特性.     

一种新型芳基硫鎓盐光引发剂的合成及应用

将二苯二硫醚作为硫源与1-甲基-2-苯基吲哚反应合成了含杂原子环的硫醚类化合物,然后再与二芳基碘三氟甲磺酸鎓盐反应,合成了一种新的芳基硫鎓盐。采用1 HNMR、MS等技术对目标化合物进行了表征,并确定了最佳反应条件。在硫醚类化合物与二芳基碘三氟甲磺酸鎓盐的摩尔比为1∶1.2,催化剂为CuI/Cu,溶剂为1,1,2,2-四氯乙烷的反应条件下,目标化合物的产率达到了62.0%。同时,对这类结构的芳基硫鎓盐进行了紫外光固化性能测试,发现其能够在紫外光固化体系中作为阳离子光引发剂得到应用。     

含碘鎓盐光产酸剂和增感染料的化学增幅型i-线正性光致抗蚀剂

4,4’-二甲苯基三氟甲磺酸碘鎓盐可以被染料增感,在365 nm光照时分解产酸.尽管产生的酸与染料的胺基发生作用,依然能在后烘过程中催化缩醛聚合物酸敏基团的分解,但需要稍高的后烘温度和稍长的后烘时间.基于此,本文将酚醛树脂、缩醛聚合物、碘鎓盐产酸剂和染料组成了一种新型的化学增幅型i-线正性光致抗蚀剂材料,在曝光量为10...     

新型阳离子光引发剂[4-(2-羟基-3-丁氧基-1-丙氧基)苯基]苯碘鎓-六氟锑酸盐的合成及光敏性能的研究

以丁基缩水甘油醚和苯酚为起始原料,进行开环缩合反应制得1-丁氧基-3-苯氧基丙-2-醇.再与羟基对甲苯磺酰氧基苯反应得到[4-(2-羟基-3-丁氧基 -1-丙氧基)]二苯碘鎓-六氟锑酸盐(简称BPI·SbF₆),产率达79%.用¹HNMR、UV、IR和元素分析对其结构进行了分析.初步研究了以BPI·SbF₆为阳离子光引发剂的脂肪族环氧(CY179)感光体系的感光特性,结果表明CY179/BPI·SbF₆感光体系有一定的后固化活性.     

碘杂环化合物的质谱研究

研究了碘杂环化合物质谱行为和电子碰撞诱导裂解途径.结果表明:3,6-二硝基-二苯并碘六环卤化物(Ⅰ、Ⅱ、Ⅲ)和3,6-二硝基-9-酮-二苯并碘六环卤化物(Ⅳ、Ⅴ、Ⅵ)的EI质谱是样品在仪器内热分解产物的混合质谱;吸附在样品上的溶剂甲酸参与了后者的热分解过程;电子碰撞诱导裂解产生的碎片离子2-卤-2′-碘-4,4′-二硝基-二苯酮(Ⅳ′、V′、Ⅵ′)是化合物Ⅳ、V、Ⅵ的主要热分解产物.     

新型三官能团脂环族环氧化合物的合成、表征及其阳离子引发光固化活性研究

以双环戊二烯等为原料合成一种新型三官能团液体脂环族环氧树脂. 通过红外光谱、 核磁共振氢谱及质谱等对其中间体及环氧树脂的结构进行了表征. 所得脂环族环氧树脂采用阳离子引发 剂二甲苯基碘鎓六氟磷酸盐引发进行紫外光固化, 对其光固化活性进行了研究, 同时讨论了氧化剂过氧化苯甲酰对该光固化体系的增感作用. 研究结果表明, 新合成的脂环族环氧树脂采用二甲苯基碘鎓六氟磷酸盐引发可以进行光固化, 过氧化苯甲酰明显地加快了其光固化速度, 固化膜具有较好的热稳定性.     

谷氨酸类脂分子在不同溶剂中的自组装性质及机理研究

以N-Boc-D-谷氨酸和不同链长的烷基氨为原料，1-乙基-3-(3-二甲氨基丙基）碳二亚胺盐酸盐和1-羟基苯并三唑为缩合剂制得N，N′-双十二（双十四，双十六）-D-Boc-谷氨酸二酰胺（DBG_n）; DBG_n在二氯甲烷中用三氟乙酸水解合成了N，N′-双十二（双十四，双十六）-D-谷氨酸二酰胺（DG_n），其结构经¹H NMR和MALDI-TOF-MS确证。采用FT-IR, SEM和XRD研究了DG_n在不同溶剂中的成胶性能。结果表明：Boc基团之间的氢键相互作用和长烷基链之间的疏水作用有利于凝胶的形成。     

Polymerization of 2‐Substituted 2‐Oxazolines Induced by Photocationic Initiators

2‐Ethyl‐2‐oxazoline (EOZO) was polymerized using two different photocationic initiators: a combination of bis{(4‐diphenylsulfonium)phenyl}sulfide bis{hexafluoroantimonate} and (4‐phenyl sulfide)phenyl diphenylsulfonium hexafluoroantimonate (Cyracure UVI® 6974) and (η⁵‐2,4‐cyclopentadien‐1‐yl)‐[η⁶‐(1‐methylethyl)benzene]iron hexafluorophosphate (Irgacure® 261). The experimental data is consistent with the premise that in the presence of Cyracure UVI® 6974 the initiation proceeds via a Brønstedt acid. In the second case the generation of oxazolinium growing species is intermediated by a complex derived from the initial ferrocenium salt.     

Grafting of a bicycloorthoester onto polymers bearing sulfonium salt structures

Graft copolymerization of a bicycloorthoester (BOE) with polymer-supported sulfonium salts was studied. Several polymer-supported sulfonium salts were prepared by the homopolymerizations of p-vinylbenzyl tetramethylenesulfonium hexafluoroantimonate ( 2 ) and 4-(p-vinylphenyl)butyl tetramethylenesulfonium hexafluoroantimonate ( 3 ), and by the copolymerizations of 2 with some vinyl monomers (n-butyl vinyl ether, styrene, acrylonitrile, and p-styrenesulfonic acid potassium salt). These sulfonium salts could initiate the polymerization of BOE to give grafted polymers. Temperature dependences of the catalytic activity of them were not so dramatic as that of benzyl tetramethylenesulfonium hexafluoroantimonate ( 1 ), but the activities of them were higher than that of 1 at temperatures lower than 80°C. The conversion of BOE in the polymerizations with these polymer initiators was ca. 30–70% at 120°C for 7 h. An effect of the comonomer structure on the catalytic activity was observed and styrene was the best comonomer for 2 in terms of the reactivity of the copolymer. The spacer-modified sulfonium salt (homopolymer of 3 ) was slightly lower than polymer-supported benzyl type sulfonium salt (homopolymer of 2 ) in the catalytic activity.     

Factors influencing EB curing of epoxy matrix

The effectiveness of electron beam (EB) curing of epoxy resins was found to be influenced by catalyst. In the presence of iodonium salt (diaryl iodonium hexafluoroantimonate, C3), the EB curing of epoxy resin is easier than in the presence of triaryl sulfonium hexafluoroantimonate (C1), or triaryl sulfonium hexafluorophosphate (C2), or iron arene containing cationic catalyst (Irgacure 261). The epoxy 616 (diglycidyl ether of bisphenol A) and 648 (diglycidyl ether of phenolic novolacs) can be cured by the above onium salts catalysts C1–C3. The epoxy with glycidyl amino epoxide group (such as AG 80; AFG 90) could not be cured by onium salts catalyst. The influence of irradiation dose, temperature and the effect of impurities on curing reaction were investigated.     

Non-steady-state living polymerization: a new route to control cationic ring-opening polymerization (CROP) of oxetane via an activation chain end (ACE) mechanism at ambient temperature

Well-defined polyoxetane with low polydispersivity has been synthesized via a novel living polymerisation process using 3-phenoxypropyl 1,4-dioxanium hexafluoroantimonate (3-PPD) as a model of a living "monomeric polyoxetane" initiator, in 1,4-dioxane at 35 degrees C.     

Gold(I)-catalyzed asymmetric cyclopropenation of internal alkynes

Highly enantioselective cyclopropenation of internal alkynes with aryldiazoacetates was achieved using the binuclear gold catalyst (S)-xylylBINAP(AuCl)(2), activated by silver hexafluoroantimonate.     

Allyl sulfonium salt as a novel initiator for active cationic polymerization of epoxide by shooting with radicals species

A rapid cationic polymerization of cyclohexene oxide that completed within a few minutes was achieved by a new initiation system that involves (1) a copper‐catalyzed reduction of benzoyl peroxide by an ascorbic acid derivative that generates free radicals and (2) capture of the radicals by allyl sulfonium salt having hexafluoroantimonate (SbF) as a counter anion, followed by fragmentation of sulfonium radical cation, from which a super acid HSbF₆ was produced to initiate the rapid polymerization. The key factor in designing an efficient allyl sulfonium salt was attachment of an electron withdrawing ester group at the allyl group, of which ability to stabilize the formed radical can enhance the efficiency in trapping radicals by the allylic salt. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4178–4183, 2010     

(Benzimidazol-1-yl)methyl]benzamides as bifunctional reagents for reliable inorganic-organic supramolecular synthesis

A series of ligands that utilize five-membered N-heterocycles as coordination sites, and the self-complementarity of the carboxamide functionality, have been employed in the supramolecular synthesis of Ag(I)-based extended networks. The crystal structures of eight compounds are reported: bis[4-(2-methylbenzimidazol-1-yl)methylbenzamide]silver(I) tetrafluoroborate hydrate methanol, 1; bis[3-(2-methylbenzimidazol-1-yl)methylbenzamide]silver(I) tetrafluoroborate, 2; bis[4-(5,6-dimethylbenzimidazol-1-yl)methylbenzamide]silver(I) tetrafluoroborate, 3; bis[4-(2-methylbenzimidazol-1-yl)methylbenzamide]silver(I) hexafluoroarsenate methanol, 4; bis[3-(2-methylbenzimidazol-1-yl)methylbenzamide]silver(I) hexafluoroarsenate methanol(0.5), 5; bis[4-(5,6-dimethylbenzimidazol-1-yl) methylbenzamide]silver(I) hexafluoroarsenate, 6; bis[4-(2-methylbenzimidazol-1-yl)methylbenzamide]silver(I) hexafluoroantimonate, 7; and bis[3-(2-methylbenzimidazol-1-yl)methylbenzamide]silver(I) hexafluoroantimonate, 8. An analysis of motifs and structural patterns that result from the primary intermolecular interactions in these structures, reveals that this family of ligands is capable of providing quite reliable means for propagating the linear geometry of the complex ions into extended 1-D architectures via ligand-ligand, N-H...O, hydrogen-bond interactions.     

Dual roles for promoting monomers to polymers: A conjugated sulfonium salt photoacid generator as photoinitiator and photosensitizer in cationic photopolymerization

An efficient strategy for comprehensive utilization of the conjugated sulfonium salt photoacid generator (PAG), namely, 3‐{4‐[4‐(4‐N,N′‐diphenylamino)‐styryl]phenyl}phenyl dimethyl sulfonium hexafluoroantimonate, was developed through photoinitiated cationic photopolymerization (CP) of epoxides and vinyl ether upon exposure to near‐UV and visible light‐emitting diodes (LEDs; e.g., 365, 385, 405, and 425 nm). Photochemical mechanisms were investigated by UV–vis spectra, molecular orbital calculations, fluorescence, cyclic voltammetry, and electron spin resonance spin‐trapping analyses. Compared with commercial PAGs, the prepared conjugated sulfonium salt generated H⁺, which can be used as photoinitiator. Moreover, the fluorescent byproducts from photodecomposition can be used as photosensitizer of commercial iodonium salt in the photoinitiating systems of CP. These novel D‐π‐A type sulfonium‐based photoinitiating systems are efficient (epoxide conversion = 85–90% and vinyl conversion >90%; LEDs upon exposure to 365–425 nm) even in low‐concentration initiators (1%, w/w) and low curing light intensities (10–40 mW cm^?2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2722–2730     

Oxoaminium salts as initiators for cationic polymerization of vinyl monomers

Oxoaminium salt ( 1 ), derived from 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO, 2 ) by one-electron oxidation, could be an initiator for cationic polymerization of vinyl monomers such as isobutyl vinyl ether (IBVE), 2,3-dihydrofuran, p-methoxystyrene, N-vinyl pyrrolidone, etc., to give the corresponding polymers, when 1 had a low nucleophilic counter anion. Formation of the adducts of 1 and IBVE as well as ¹H-NMR and IR data suggested the formation of polymers containing N? O? C structure as the polymer head group. In the polymerization of IBVE, the effects of solvent and concentration of 1 were little observed, however the polymerization rate was dependent on temperature. Furthermore, the thermal reaction of the polymers obtained, which were regarded as prepolymers for block copolymerization and polymeric initiators for radical polymerization, was studied. For example, poly(2-benzylidene-1,3-dioxane) obtained by the polymerization of 2-benzylidene-1,3-dioxane with oxoaminium hexafluoroantimonate ( 1, X = SbF₆) was employed as an initiator for radical polymerization of MMA to give its block copolymer with PMMA. © 1993 John Wiley & Sons, Inc.