A Novel Electrochemical Method for the Analysis of Hydrogen Peroxide with the Use of a Glassy Carbon Electrode Modified by a Prussian Blue/Copper‐Gold Bimetallic Nanoparticles Hybrid Film

A novel Prussian blue/copper‐gold bimetallic nanoparticles hybrid film modified electrode was prepared by electrochemical deposition on a glassy carbon electrode (PB/Cu‐AuNPs/GCE). Morphology and electrochemistry of this electrode were studied by UV‐vis spectroscopy, scanning electron microscopy, X‐ray diffraction, cyclic voltammetry and electrochemical impedance spectroscopy. The sensor showed significantly better electrocatalytic activity for the reduction of hydrogen peroxide in comparison with the single PB/GCE and PB/AuNPs/GCE. This was attributed to the synergistic effect of PB and Cu‐Au bimetallic nanoparticles. Also, the sensor demonstrated an overall high level of performance for the analysis of H₂O₂ in the concentration range from 0.002 to 0.84 mM.     

One‐step Synthesis of AuAg Alloy Nanodots and its Electrochemical Studies towards Nitrobenzene Reduction and Sensing

Efficient, stable, and low‐cost electrocatalysts for the degradation and sensing of environment pollutants are essential components of clean environment monitoring. Here we report, one‐step synthesis and characterization of 1–3 nm diameter sized bi‐metallic AuAg nanodots (NDs) embedded in amine functionalized silicate sol‐gel matrix (SSG) and its electrochemical studies toward nitrobenzene. The SSG was used as a reducing agent as well as stabilizer for the prepared mono‐ and bi‐metallic nanoparticles (NPs). From the HRTEM, STEM‐EDS and XPS analyses, the bi‐metallic AuAg NDs were identified as an alloy and not the mixtures of Au and Ag NPs. Characteristic surface plasmon resonance (SPR) band between the Au and Ag NPs SPR absorption region was noticed for the prepared AuAg NDs. The AuAg alloy NDs with different concentrations of Au and Ag (Au₂₅Ag₇₅, Au₅₀Ag₅₀ and Au₇₅Ag₂₅ NDs) modified electrodes exhibited synergistic electrocatalytic effect than did the Au and Ag NPs towards nitrobenzene reduction and detection. Together with ultra‐small size and exceptional colloidal stability features within these SSG‐AuAg NDs pave convenient way for nanotechnology‐based catalysts development and sensor applications.     

Au‐TiO2/Graphene Nanocomposite Film for Electrochemical Sensing of Hydrogen Peroxide and NADH

We describe a simple method for preparing Au‐TiO₂/graphene (GR) nanocomposite by deposition of Au nanoparticles (NPs) on TiO₂/GR substrates. The as‐prepared Au‐TiO₂/GR was characterized by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The presence of Au NPs on TiO₂/GR surface remarkably improves the electrocatalytic activity towards the oxidation of hydrogen peroxide (H₂O₂) and β‐nicotinamide adenine dinucleotide (NADH). The Au‐TiO₂/GR modified glassy carbon (GC) electrode exhibits good amperometric response to H₂O₂ and NADH, with linear range from 10 to 200 µM and 10 to 240 µM, and detection limit of 0.7 and 0.2 µM, respectively.     

Activation of Au–Ag Plasmonic Bimetallic Nanocatalysts with Cold Plasma: The Role of Loading Sequence of Plasmonic Metals and Discharge Atmosphere

The activation of Au–Ag plasmonic bimetallic nanocatalyst can make the nanocatalyst exhibit superior visible-light (VL) photocatalytic activity. An efficient activation of Au–Ag nanocatalyst by cold plasma requires the restructuring of Au and Ag species over catalyst surface to form Au–Ag alloy nanoparticles while suppressing agglomeration of the nanoparticles. We here report that the loading sequence of Au and Ag components on titanium dioxide (TiO₂) support during catalyst preparation and discharge atmosphere play important roles in the plasma activation. Preparation of AuAg/TiO₂ nanocatalyst by depositing Ag and Au in sequence could avoid the undesired loss of Ag component, and ensure an effective restructuring of Au and Ag species in O₂ plasma activation. Compared with the reductive (H₂) and inert (Ar and N₂) plasmas, discharge in oxidative O₂ establishes Coulomb field with the negatively charged species over catalyst surface and enable the restructuring and intimate interaction of Au and Ag species. The catalyst characterization and density functional theory calculations suggest that O₂ plasma endows AuAg/TiO₂ nanocatalyst with large numbers of Au–Ag alloy nanoparticles, small size of plasmonic nanoparticles, high density of coordinatively unsaturated sites, and high content of surface oxygen species in the activation, which facilitates the adsorption and activation of O₂, and thus CO oxidation reaction under VL irradiation.

     

Ternary Ag/Polyaniline/Au nanocomposites: Preparation,characterization and electrochemical properties

Ternary Ag/Polyaniline/Au nanocomposites were synthesized successfully by immobilizing of Au nanoparticles (NPs) on the surface of Ag/Polyaniline (PANI) nanocomposites. Ag/PANI nanocomposites were prepared via in situ chemical polymerization of aniline in the presence of 4-aminothiophenol (4-ATP) capped silver colloidal NPs. Then, uniform gold (Au) NPs were assembled on the surface of resulted Ag/PANI nanocomposites through electrostatic interaction to get Ag/Polyaniline/Au nanocomposites. The nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), ultraviolet visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). Moreover, Ag/PANI/Au nanocomposites were immobilized on the surface of a glassy carbon electrode and showed enhanced electrocatalytic activity for the reduction of H₂O₂ compared with Ag/PANI.     

QCM and EC-SPR Studies of Cytochrome cSelf-assembled on Au Electrode and Enhancement of SPR Signal by Au Nanoparticles

Quartz crystal microbalance(QCM) and cyclic voltammetry(CV) were used to characterize the monolayer of cytochrome c(Cyt c), which was adsorbed on gold film modified with alkanethiol mixed monolayer. A direct comparison of protein surface coverages calculated from QCM and cyclic voltammetric measurements illustrates that the ratio of the electroactive Cyt c to the total surface-confined Cyt cis 34%, which suggests that the orientation is a main factor affecting the electroactivity of Cyt c. Moreover, surface plasmon resonance(SPR) measurement combined with CV “in situ” was used to investigate the conformational change of Cyt c in the redox process. Besides, Au nanoparticles(Au NPs) were adsorbed on the surface of Cyt c. The result indicates that Au NPs promote electron transfer between Cyt c and the gold electrode, and SPR result suggests Au NPs enhance SPR signal.     

全固态Z-型CdS/Au/Bi2MoO6异质结的构筑及其光催化性能

采用简单的化学还原沉积和二次水热的方法成功制备了CdS和Au共同修饰Z型CdS/Au/Bi2MoO6(CdS/Au/BMO)光催化剂。通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)等测试技术对其组成、形貌、光吸收特性和光电化学性能等进行系统表征。实验结果表明,CdS/Au/BMO-2复合材料在可见光照射下表现出最佳的降解效率,其降解RhB的速率常数约为BMO的8.8倍和CdS的20倍。Au NPs作为固态电子媒介,为光生电子的传输和转移提供了一个通道,同时Au NPs的表面等离子体共振(SPR)效应和CdS纳米粒子显著拓宽了催化体系对可见光的响应范围;通过对催化剂的组成、结构和光电性能表征,确定了CdS/Au/BMO的能带结构,进而探讨了CdS/Au/BMO活性增强机制。     

Probing the Catalytic Activity of Reduced Graphene Oxide Decorated with Au Nanoparticles Triggered by Visible Light

Hybrid materials in which reduced graphene oxide (rGO) is decorated with Au nanoparticles (rGO–Au NPs) were obtained by the in situ reduction of GO and AuCl₄^?_(aq) by ascorbic acid. On laser excitation, rGO could be oxidized as a result of the surface plasmon resonance (SPR) excitation in the Au NPs, which generates activated O₂ through the transfer of SPR‐excited hot electrons to O₂ molecules adsorbed from air. The SPR‐mediated catalytic oxidation of p‐aminothiophenol (PATP) to p,p′‐dimercaptoazobenzene (DMAB) was then employed as a model reaction to probe the effect of rGO as a support for Au NPs on their SPR‐mediated catalytic activities. The increased conversion of PATP to DMAB relative to individual Au NPs indicated that charge‐transfer processes from rGO to Au took place and contributed to improved SPR‐mediated activity. Since the transfer of electrons from Au to adsorbed O₂ molecules is the crucial step for PATP oxidation, in addition to the SPR‐excited hot electrons of Au NPs, the transfer of electrons from rGO to Au contributed to increasing the electron density of Au above the Fermi level and thus the Au‐to‐O₂ charge‐transfer process.     

Sub-nanometer-thick Al2O3 Overcoat Remarkably Enhancing Thermal Stability of Supported Gold Catalysts

Supported gold nanoparticle catalysts show extraordinarily high activity in many reactions. While the relative poor thermal stability of Au nanoparticles against sintering at elevated temperatures severely limits their practical applications. Here atomic layer deposition (ALD) of TiO₂ and Al₂O₃ was performed to deposit an Au/TiO₂ catalyst with precise thickness con-trol, and the thermal stability was investigated. We surprisingly found that sub-nanometer-thick Al₂O₃ overcoat can su ciently inhibit the aggregation of Au particles up to 600 C in oxygen. On the other hand, the enhancement of Au nanoparticle stability by TiO₂ overcoat is very limited. Di use reffectance infrared Fourier transform spectroscopy (DRIFTS) of CO chemisorption and X-ray photoelectron spectroscopy measurements both con rmed the ALD overcoat on Au particles surface and suggested that the presence of TiO₂ and Al₂O₃ ALD overcoat on Au nanoparticles does not considerably change the electronic properties of Au nanoparticles. The catalytic activities of the Al₂O₃ overcoated Au/TiO₂ catalysts in CO oxidation increased as increasing calcination temperature, which suggests that the embed-ded Au nanoparticles become more accessible for catalytic function after high temperature treatment, consistent with our DRIFTS CO chemisorption results.     

Exploring the interactions between gold nanoparticles and analytes through surface‐assisted laser desorption/ionization mass spectrometry

Surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS) is applied to provide strong evidence for the chemical reactions of functionalized gold nanoparticles (Au NPs) with analytes – Hg²⁺ ions induced MPA?Au NPs aggregation in the presence of 2,6‐pyridinedicarboxylic acid (PDCA) and H₂O₂ induced fluorescence quenching of 11‐MUA?Au NDs. PDCA‐Hg²⁺‐MPA coordination is responsible for Au NPs aggregation, while the formation of 11‐MUA disulfide compounds that release into the bulk solution is responsible for H₂O₂‐induced fluorescence quenching. In addition to providing information about the chemical structures, SALDI‐MS is also selective and sensitive for the detection of Hg²⁺ ions and H₂O₂. The limits of detection (LODs) for Hg²⁺ ions and H₂O₂ by SALDI‐MS were 300 nM and 250 µM, respectively. The spot‐to‐spot variations in the two studies were both less than 18% (50 sample spots). Our results reveal that SALDI‐MS can be used to study analyte‐induced changes in the surface properties of nanoparticles. Copyright © 2010 John Wiley & Sons, Ltd.     

Haemoglobin immobilized on nafion modified multi-walled carbon nanotubes for O2, H2O2 and CCl3COOH sensors

A conductive biocomposite film (MWCNTs-NF-Hb) containing multi-walled carbon nanotubes (MWCNTs) incorporated with entrapped haemoglobin (Hb) in nafion (NF) has been synthesized on glassy carbon electrode (GCE), gold (Au), indium tin oxide (ITO) and screen printed carbon electrode (SPCE) separately by potentiostatic methods. The presence of both MWCNTs and NF in the biocomposite film enhances the surface coverage concentration (Γ), and increases the electron transfer rate constant (K_s) to 132%. The biocomposite film exhibits a promising enhanced electrocatalytic activity towards the reduction of O₂, H₂O₂ and CCl₃COOH. The cyclic voltammetry has been used for the measurement of electrocatalysis results of analytes by means of biocomposite film-modified GCEs. The MWCNTs-NF-Hb-modified GCEs’ sensitivity values are higher than the values obtained for other film modified GCEs. The surface morphology of the biocomposite films which have been deposited on ITO has been studied using scanning electron microscopy and atomic force microscopy. The studies have revealed that there was an incorporation of NF and immobilization of Hb on MWCNTs. Finally, the flow injection analysis has been used for the amperometric studies of analytes at MWCNTs-Hb and MWCNTs-NF-Hb film modified SPCEs. The amperometric study results have shown higher slope values for MWCNTs-NF-Hb biocomposite film.     

Non-enzymatic hydrogen peroxide sensor based on a nanoporous gold electrode modified with platinum nanoparticles

A novel non-enzymatic electrochemical sensor based on a nanoporous gold electrode modified with platinum nanoparticles was constructed for the determination of hydrogen peroxide (H₂O₂). Platinum nanoparticles exhibit good electrocatalytic activity towards hydrogen peroxide. The nanoporous gold (NPG) increases the effective surface area and has the capacity to promote electron-transfer reactions. With electrodeposition of Pt nanoparticles (NPs) on the surface of the nanoporous gold, the modified Au electrode afforded a fast, sensitive and selective electrochemical method for the determination of H₂O₂. The linear range for the detection of H₂O₂ was from 1.0 × 10^?7 M to 2.0 × 10^?5 M while the calculated limit of detection was 7.2 × 10^?8 M on the basis of the 3σ/slope (σ represents the standard deviation of the blank samples). These findings could lead to the widespread use of electrochemical sensors to detect H₂O₂.     

Enhanced surface plasmon resonance by Au nanoparticles immobilized on a dielectric SiO2 layer on a gold surface

This paper introduces strategies for enhancement of a surface plasmon resonance (SPR) signal by adopting colloidal gold nanoparticles (AuNPs) and a SiO₂ layer on a gold surface. AuNPs on SiO₂ on a gold surface were compared with an unmodified gold surface and a SiO₂ layer on a gold surface with no AuNPs attached. The modified surfaces showed significant changes in SPR signal when biomolecules were attached to the surface as compared with an unmodified gold surface. The detection limit of AuNPs immobilized on a SPR chip was 0.1 ng mL⁻¹ for the prostate-specific antigen (PSA), a cancer marker, as measured with a spectrophotometer. Considering that the conventional ELISA method can detect ∼10 ng mL⁻¹ of PSA, the strategy described here is much more sensitive (∼100 fold). The enhanced shift of the absorption curve resulted from the coupling of the surface and particle plasmons by the SiO₂ layer and the AuNPs on the gold surface.     

A Novel Hydrogen Peroxide Biosensor Based on the Synergistic Effect of Gold‐Platinum Alloy Nanoparticles/Polyaniline Nanotube/Chitosan Nanocomposite Membrane

Based on the immobilization of horseradish peroxidase (HRP) in chitosan(CS) on a glassy carbon electrode (GCE) modified with the Au‐Pt alloy nanoparticles (NPs) / polyaniline nanotube (nanoPAN) nanocomposite film, a novel hydrogen peroxide biosensor was constructed. The modified processes of GCE were monitored by cyclic voltammetry and electrochemical impedance spectroscopy. Au‐PtNPs/nanoPAN/CS had a better synergistic electrochemical effect than did AuNPs/nanoPAN/CS or PtNPs/nanoPAN/CS. The amperometric response of the biosensor towards H₂O₂ was investigated by successively adding aliquots of H₂O₂ to a continuous stirring phosphate buffer solution under the optimized conditions. Because Au‐PtNPs have unique catalytic properties and good biocompatibility, and especially Au‐PtNPs and nanoPAN have synergistic augmentation for facilitating electron‐transfer, the biosensor displayed a fast response time (<2 s) and broad linear response to H₂O₂ in the range from 1.0 to 2200 μmol L^?1 with a relatively low detection limit of 0.5 μmol L^?1 at 3 times the background noise. Moreover, the biosensor can be applied in practical analysis and exhibited high sensitivity, good reproducibility, and long‐term stability.     

Characterization of Au-Rh and Au-Mo bimetallic nanoclusters on TiO2(110): A comparative study

Gold-rhodium and gold-molybdenum layers were prepared on a nearly stoichiometric titania and characterized by LEIS, XPS and STM. In the Au-Rh bimetallic system, Rh atoms impinged onto Au clusters pregrown on TiO₂(110) became covered by gold atoms. In contrast, Mo caused the disruption of gold nanoparticles.     

Fabrication of Au‐Nanoparticle/TiO2‐Nanotubes Electrodes Using Electrochemical Methods and Their Application for Electrocatalytic Oxidation of Hydroquinone

Gold nanoparticle (Au‐NPs)‐Titanium oxide nanotube (TiO₂‐NTs) electrodes are prepared by using galvanic deposition of gold nanoparticles on TiO₂‐NTs electrodes as support. Scanning electron microscopy and energy‐dispersive X‐ray spectroscopy results indicate that nanotubular TiO₂ layers consist of individual tubes of about 60–90 nm diameters and gold nanoparticles are well‐dispersed on the surface of TiO₂‐NTs support. The electrooxidation of hydroquinone of Au‐NPs/TiO₂‐NTs electrodes is investigated by different electrochemical methods. Au‐NPs/TiO₂‐NTs electrode can be used repeatedly and exhibits stable electrocatalytic activity for the hydroquinone oxidation. Also, determination of hydroquinone in skin cream using this electrode was evaluated. Results were found to be satisfactory and no matrix effects are observed during the determination of hydroquinone content of the “skin cream” samples.     

Synthesis, Structure and Growth Mechanism of Size and Shape Tunable Au/Ag Bimetallic Nanoparticles

By simply adding ascorbic acid in advance of AgNO₃, the size and shape controllable Au/Ag bimetallic nanoparticles (NP) were prepared in the traditional Au growth solution free of seed at room temperature. The size distribution of NP is well uniform with ca. 10%–15% standard deviation in diameter. By changing CTAB concentration, the size and shape of NPs are tunable. After researching the surface‐enhanced Raman spectroscopy (SERS) behavior of the prepared NPs, an enhancement factor varied from 4.3×10⁴ to 1.1×10⁵ was obtained for the NP centered at ca. (64±8) nm. Electrochemical cyclic voltammetric results revealed that the so formed nanoparticles were Au riched Au/Ag bimetallic NP, and this formation might be due to the disproportionation reaction of Au⁺ prompted by Ag⁺ and the under potential deposition process of Ag⁺ on Au.     

Direct electrochemistry of glucose oxidase on sulfonated graphene/gold nanoparticle hybrid and its application to glucose biosensing

Sulfonated graphene nanosheet/gold nanoparticle (SGN/Au) hybrid was synthesized by electrostatic self-assembly of anionic SGN and positively charged gold nanoparticles. Due to the well-dispersivity of SGN in aqueous solution and its adequate negative charge, Au nanoparticles were assembled uniformly on graphene surface with high distribution. With the advantages of both graphene and Au nanoparticles, SGN/Au hybrid showed enhanced electrocatalytic activity towards O₂ reduction. Furthermore, it provided a conductive and favorable microenvironment for the glucose oxidase (GOD) immobilization and thus promoted its direct electron transfer at the glassy carbon electrode. Based on the consumption of O₂ caused by glucose at the interface of GOD electrode modified with SGN/Au hybrid, the modified electrode displayed satisfactory analytical performance, including high sensitivity (14.55 μA mM^?1 cm^?2), low detection limit (0.2 mM), an acceptable linear range from 2 to 16 mM, and also the prevention from the interference of some species. These results indicated that the prepared SGN/Au hybrid is a promising candidate material for high-performance glucose biosensor.     

Electrochemical Biosensor Utilizing Supramolecular Association of Enzyme on Sol−gel Matrix Embedded Gold Nanoparticles Supported Reduced Graphene Oxide−cyclodextrin Nanocomposite

Herein we present β‐cyclodextrin (CD)‐functionalized reduced graphene oxide (RGO) nanosheets supported on silicate sol‐gel matrix‐embedded gold nanoparticles (Au NPs) modified electrode as a new affinity binding nanocomposite. The modified electrode is fabricated through layer‐by‐layer drop casting followed by immobilization of chemically modified enzyme conjugate (horse radish peroxidase (HRP)?adamantane carboxylic acid (ADA)). This affinity system is based on the supramolecular association between CDs and HRP?ADA and is mimicking the biological avidin?biotin interactions. CDs‐functionalized RGO (RGO?CD) functions as a macrocyclic host to form stable supramolecular inclusion complexes with enzyme conjugate. Besides Au NPs improve the interfacial interaction with RGO?CD nanosheets, and thus exhibit synergistic electrocatalytic effect toward H₂O₂ reduction in the presence of 1 mM hydroquinone.     

Fe3O4/PEI/Au@CdSe/CdS多功能复合材料的制备与表征

以共沉淀法制备出Fe₃O₄纳米粒子,通过聚乙烯亚胺(PEI)修饰Fe₃O₄纳米粒子,再原位复合上Au纳米粒子,制得Fe₃O₄/PEI/Au纳米颗粒微球。再将Fe₃O₄/PEI/Au纳米颗粒与巯基乙酸修饰的量子点CdSe/CdS连接,成功制备了Fe₃O₄/PEI/Au@CdSe/CdS多功能复合微球。经过傅里叶变换红外光谱仪(FTIR)、荧光分光光度计、荧光显微镜、X射线衍射(XRD)、透射电子显微镜(TEM)及振动样品磁强计(VSM)的表征。结果表明:多功能复合微球的粒径在40 nm左右,具有超顺磁性,剩磁,矫顽力近似等于零,饱和磁化强度为28.83 A·m²·kg^-1,同时兼有优越的荧光性能和金纳米粒子的特性。