压气机悬臂静叶流场非定常数值模拟

以现代高压压气机一排悬臂静叶与一排转叶组成的典型级为研究对象,采用非定常数值模拟方法,分析了非定常与定常数值模拟计算得出的级特性线以及峰值效率点气动参数在展向分布的差异,并对悬臂静叶内部流场结构进行了详细分析,结果表明:当悬臂静叶的轮毂设计间隙为2.5%叶高时,非定常计算的综合喘振裕度比定常大5.85%;在峰值效率点工况下,悬臂静叶总压损失和转子效率的非定常影响范围在10%以内,转叶进口相对气流角沿展向分布的影响在0.5°以内。悬臂静叶根部10%叶高以下区域出现了明显的泄漏流动,3.4%叶高压力系数变化最大,轮毂泄漏流起始于20%弦长附近,发展到70%弦长位置时泄漏损失最大,随后逐渐减弱.     

Mo掺杂NiMnSe2的制备及其超级电容器性能

成分和结构是影响多元过渡金属硒化物电化学活性的关键因素。适当掺杂其他金属元素可以有效提高电极材料的电化学性能。通过简单的一步水热法,在泡沫镍上制备出了一种无黏结剂的Mo掺杂NiMnSe₂(记作Ni_0.8Mo_0.2MnSe₂)。Mo的少量掺杂为电极材料提供了丰富的反应活性位点,大大提高了NiMnSe₂的电化学性能。在1 A·g^-1时,Ni_0.8Mo_0.2MnSe₂的比容量达到1 404.0 F·g^-1。掺杂Mo显著降低了NiMnSe₂的电荷转移电阻和扩散电阻。组装的混合超级电容器Ni_0.8Mo_0.2MnSe₂//AC (活性炭)比容量达到81.6 F·g^-1,且倍率性能优异。在2 A·g^-1下连续充放电10 000周,容量保持率为95.8%,表现出超高的循环稳定性。混合超级电容器Ni_0.8Mo_0.2MnSe₂//AC在376.6 W·kg^-1的功率密度下,能量密度达25.5 Wh·kg^-1,高于NiMnSe₂//AC (17.3 Wh·kg^-1)。     

Nd:YAG陶瓷与单晶4F3/2–4I13/2跃迁的弱谱线多波长激光性能对比

报道了基于半导体激光端面抽运Nd:YAG的⁴F_3/2–⁴I_13/2 跃迁的弱谱线多波长激光输出. 实验对比了透明陶瓷与单晶材料的激光输出特性, 表明透明陶瓷和单晶材料荧光谱强度的略微差异, 导致了多波长输出时相同两个波长之间的激光强度比在两种材料中的差异. 基于两种耦合输出镜片, 激光阈值都在2 W左右. 在13.5 W的抽运功率下, 基于Nd:YAG透明陶瓷获得了输出功率4.05 W、强度比1 :2的1338与1356 nm双波长激光和输出功率3.65 W、强度比13 : 1的1356与1414 nm 双波长激光, 斜率效率分别达33.9% 和31.9%.     

化学动力学模型预测H_2/CO燃烧的不确定性分析

本文采用数据协同方法,研究了由于模型参数和实验测量不确定度传递导致的H_2/CO详细化学动力学模型预测的不确定性。研究发现在数据集中增加一组H_2/O_2/CO_2混合物在1.5 MPa时层流火焰传播速度实验测量值,数据集出现不一致,并分析了两种有可能导致数据集不一致的原因。研究结果还表明,选择性的增加实验目标,能有效地约束模型参数不确定性空间,提高模型预测性能,并为实验研究提供引导.     

Synthesis,bioactivity and functional evaluation of linker-modified allatostatin analogs as potential insect growth regulators

Insect growth regulators play an important role in integrated pest management strategies.The FGLa–allatostatins(ASTs)are a family of neuropeptides that can inhibit juvenile hormone(JH)biosynthesis by the corpora allata(CA)of Diploptera punctata in vitro,are regarded as insect growth regulator candidates.In the search for new potential mimics and to explore the effect of linker length on inhibiting JH biosynthesis,a series of AST analogs were synthesized by modifying the linker of K24,which was found to have a significant effect on JH biosynthesis in vitro in our previous study.Functional evaluation demonstrated that all the target compounds can activate the Dippu-Ast R,albeit with different potencies.Analog L6 with the longest linker(n=5),exhibited not only a promising effect on inhibition of JH biosynthesis both in vitro and in vivo,but also good activity in inhibiting basal oocyte growth.Structure–activity relationships(SAR)studies showed that longer linkers provided greater contribution to activity.     

Adaptive nematic liquid crystal lens array with resistive layer

ABSTRACT

We propose an adaptive nematic liquid crystal (LC) lens array using a dielectric layer with low dielectric constant as resistive layer. With the resistive layer and periodic-arranged iridium tin oxide (ITO) electrodes, the vertical electric field across the LC layer varies linearly over the lens aperture is obtained in the voltage-on state. As a result, a centrosymmetric gradient refractive index profile within the LC layer is generated, which causes the focusing behaviour. As a result of the optimisation, a thin cell gap which greatly reduces the switching time of the LC lens array can be achieved in our design. The main advantages of the proposed LC lens array are in the comparatively low operating voltage, the flat substrate surface, the simple electrodes, and the uniform LC cell gap. The simulation results show that the focal length of the LC lens array can be tuned continuously from infinity to 3.99 mm by changing the applied voltage.     

Removal,recovery and enrichment of metals from aqueous solutions using carbon nanotubes

Environmental pollution caused by toxic metals (heavy metals, radioactive metals, etc.) is one of the major global issues, thus removal of toxic metals from contaminated water seems to be particularly important. On the other hand, the recovery and enrichment of metals, especially noble metals, from waste water is also crucial. To address these issues, nanotechnology plays an essential role in environmental monitoring and pollution control. To remove metals from contaminated water, or enrich metals from waste water, carbon nanotubes (CNTs) and their composites have attracted great attention due to their excellent adsorption performance. The removal efficiency for metal ions by CNTs was observed aroud 10–80 %, which could be improved to approach 100 % by selectively functionalizing CNTs with organic ligands. Herein, we review the applications of CNTs in treatment of toxic metal-containing wastewater for environmental monitoring and metals recovery. Due to their higher sensitivity and selectivity towards the enrichment of metals or detection of toxic metal pollution of the environment, and the latest research progress of using CNT composites for metal treatment is also discussed.