Selective synthesis combined with chemical separation of single-walled carbon nanotubes for chirality selection

Single-walled carbon nanotubes (SWNTs) are potential materials for future nanoelectronics. Since the electronic and optical properties of SWNTs strongly depend on tube diameter and chirality, obtaining SWNTs with narrow (n,m) chirality distribution by selective growth or chemical separation has been an active area of research. Here, we demonstrate that a new, bimetallic FeRu catalyst affords SWNT growth with narrow diameter and chirality distribution in methane CVD. At 600 degrees C, methane CVD on FeRu catalyst produced predominantly (6,5) SWNTs according to UV-vis-NIR absorption and photoluminescence excitation/emission (PLE) spectroscopic characterization. At 850 degrees C, the dominant semiconducting species produced are (8,4), (7,6), and (7,5) SWNTs, with much narrower distributions in diameter and chirality than materials grown by other catalysts. Further, we show that narrow diameter/chirality growth combined with chemical separation by ion exchange chromatography (IEC) greatly facilitates achieving single (m,n) SWNT samples, as demonstrated by obtaining highly enriched (8,4) SWNTs with near elimination of metallic SWNTs existing in the as-grown material.     

Distribution patterns and controllable transport of water inside and outside charged single-walled carbon nanotubes

The density distribution patterns of water inside and outside neutral and charged single-walled carbon nanotubes (SWNTs) soaked in water have been studied using molecular dynamics simulations based on TIP3P potential and Lennard-Jones parameters of CHARMM force field, in conjunction with ab initio calculations to provide the electron density distributions of the systems. Water molecules show different electropism near positively and negatively charged SWNTs. Different density distribution patterns of water, depending on the diameter and chirality of the SWNTs, are observed inside and outside the tube wall. These special distribution patterns formed can be explained in terms of the van der Waals and electrostatic interactions between the water molecules and the carbon atoms on the hexagonal network of carbon nanotubes. The electric field produced by the highly charged SWNTs leads to high filling speed of water molecules, while it prevents them from flowing out of the nanotube. Water molecules enter the neutral SWNTs slowly and can flow out of the nanotube in a fluctuating manner. It indicates that by adjusting the electric charge on the SWNTs, one can control the adsorption and transport behavior of polar molecules in SWNTs to be used as stable storage medium with template effect or transport channels. The transport rate can be tailored by changing the charge on the SWNTs.     

Crystal plane dependent growth of aligned single-walled carbon nanotubes on sapphire

On single-crystal substrates, such as sapphire (alpha-Al 2O 3) and quartz (SiO 2), single-walled carbon nanotubes (SWNTs) align along specific crystallographic axes of the crystal, indicating that the SWNT growth is influenced by the crystal surface. Here, we show that not only the orientation, but also the diameter and chirality of SWNTs are affected by the crystal plane of the sapphire substrate. The aligned SWNTs grown on the A- and R-planes of sapphire have narrower diameter distributions than randomly oriented tubes produced on the C-plane sapphire and amorphous SiO 2. Photoluminescence measurements reveal a striking difference between the aligned SWNTs: near-zigzag tubes are observed on the A-plane and near-armchair tubes on the R-plane. This study shows the route for the diameter and chirality control of SWNTs by surface atomic arrangements of a single-crystal substrate.     

Coronene Encapsulation in Single‐Walled Carbon Nanotubes: Stacked Columns,Peapods, and Nanoribbons

Encapsulation of coronene inside single‐walled carbon nanotubes (SWNTs) was studied under various conditions. Under high vacuum, two main types of molecular encapsulation were observed by using transmission electron microscopy: coronene dimers and molecular stacking columns perpendicular or tilted (45–60°) with regard to the axis of the SWNTs. A relatively small number of short nanoribbons or polymerized coronene molecular chains were observed. However, experiments performed under an argon atmosphere (0.17 MPa) revealed reactions between the coronene molecules and the formation of hydrogen‐terminated graphene nanoribbons. It was also observed that the morphology of the encapsulated products depend on the diameter of the SWNTs. The experimental results are explained by using density functional theory calculations through the energies of the coronene molecules inside the SWNTs, which depend on the orientation of the molecules and the diameter of the tubes.     

Single-walled carbon nanotube growth using [Fe(3)(mu(3)-O)(mu-O(2)CR)(6)(L)(3)](n+) complexes as catalyst precursors

We present herein the VLS growth of SWNTs from oxo-hexacarboxylate-triron precursors, [Fe(3)O(O(2)CCH(3))(6)(EtOH)(3)] and [Fe(3)O(O(2)CCH(2)OMe)(6)(H(2)O)(3)][FeCl(4)], on spin-on-glass surfaces, using C(2)H(4)/H(2) (750 degrees C) and CH(4)/H(2) (800 and 900 degrees C) growth conditions. The SWNTs have been characterized by AFM, SEM and Raman spectroscopy. The characteristics of the SWNTs are found to be independent of the identity of the precursor complex or the solvent from which it is spin-coated. The as grown SWNTs show a low level of side-wall defects and have an average diameter of 1.2-1.4 nm with a narrow distribution of diameters. At 750 and 800 degrees C the SWNTs are grown with a range of lengths (300 nm-9 microm), but at 900 degrees C only the longer SWNTs are observed (6-8 microm). The yield of SWNTs per unit area of catalyst nanoparticle decreases with the growth temperature. We have demonstrated that spin coating of molecular precursors allows for the formation of catalyst nanoparticles suitable for growth of SWNTs with a high degree of uniformity in the diameter, without the formation of preformed clusters of a set diameter.     

FeCo/MgO催化生长体相单壁碳纳米管的直径调控

单壁碳纳米管的直径可控生长是碳纳米管生长与应用领域的重要问题。直径在0.9–1.2 nm范围内的碳纳米管非常适合应用于近红外荧光生物成像领域和量子器件单光子光源之中。本文使用FeCo/MgO催化剂生长出了直径在这一范围内的体相单壁碳纳米管,并研究了催化剂制备和CVD生长条件对碳纳米管直径的影响。催化剂前驱体的制备是获得小尺寸催化剂颗粒的关键步骤。在浸渍过程中,使用难水解的金属硫酸盐作为前驱体、降低浸渍pH以及加入络合剂分子都会抑制溶液干燥过程中金属盐的水解,从而控制催化剂的尺寸,使其适合于生长出直径可控的单壁碳纳米管。在CVD生长过程中,使用乙醇作为碳源、使用较低的碳氢比例也有利于小直径碳纳米管的生长。     

The effect of catalyst concentration on the synthesis of single-wall carbon nanotubes

Single wall carbon nanotubes (SWNTs) were synthesized by electric arc discharge method with a mixture of nickel and yttrium as catalysts. The effect of the catalyst concentration on the synthesis of SWNTs was studied. Raman spectra of SWNTs have been recorded with excitation wavelengths from 476.5 to 1064 nm. The Raman peaks of the radial breathing modes (RBM) of SWNTs were assigned. The results indicate that the diameter distribution of SWNTs is in the range of 1.2-1.6 nm, and the SWNTs with diameter 1.43 nm are in the majority. The catalyst concentrations have large effect on the yield of SWNTs and little effect on the diameter distribution of SWNTs.     

Photochemical Behavior of Single‐Walled Carbon Nanotubes in the Presence of Propylamine

This report describes the photochemical behavior of single‐walled carbon nanotubes (SWNTs) in the presence of propylamine. The SWNTs are characterized by absorption and Raman spectroscopy. The spectral changes due to photoirradiation indicate that reactions occur predominantly with the metallic SWNTs and small‐diameter SWNTs. The detection of amine radicalcation species by ESR spectroscopy reveals photoinduced electron transfer from the amine to the excited SWNTs. After exposure of the photoirradiated SWNTs to air, the characteristic spectra were recovered, except for that of the small‐diameter SWNTs. The results suggest that, after photoreduction of the SWNTs, subsequent selective sidewall functionalization of the small‐diameter SWNTs occurs.     

Molecular dynamics study of the catalyst particle size dependence on carbon nanotube growth

The molecular dynamics method, based on an empirical potential energy surface, was used to study the effect of catalyst particle size on the growth mechanism and structure of single-walled carbon nanotubes (SWNTs). The temperature for nanotube nucleation (800-1100 K), which occurs on the surface of the cluster, is similar to that used in catalyst chemical vapor deposition experiments, and the growth mechanism, which is described within the vapor-liquid-solid model, is the same for all cluster sizes studied here (iron clusters containing between 10 and 200 atoms were simulated). Large catalyst particles, which contain at least 20 iron atoms, nucleate SWNTs that have a far better tubular structure than SWNTs nucleated from smaller clusters. In addition, the SWNTs that grow from the larger clusters have diameters that are similar to the cluster diameter, whereas the smaller clusters, which have diameters less than 0.5 nm, nucleate nanotubes that are approximately 0.6-0.7 nm in diameter. This is in agreement with the experimental observations that SWNT diameters are similar to the catalyst particle diameter, and that the narrowest free-standing SWNT is 0.6-0.7 nm.     

CVD growth of single-walled carbon nanotubes with narrow diameter distribution over Fe/MgO catalyst and their fluorescence spectroscopy

Single-walled carbon nanotubes (SWNTs) with a narrow diameter distribution are synthesized by thermal chemical vapor deposition (CVD) of methane over Fe/MgO catalyst on the basis of parametric study considering Fe loading, reaction temperature and time, methane concentration, and structure of a support material. We found that the porous MgO support gives the SWNTs with a narrow diameter distribution with the mean diameter and standard deviation of 0.93 and 0.06 nm, respectively, only when the Fe loading and reaction temperature are relatively low. The higher Fe loading and/or the higher reaction temperature enlarged the nanotube diameter, forming double-walled carbon nanotubes (DWNTs) in addition to SWNTs. This result indicates that only the diameter of Fe nanoparticles determines the growth of either SWNTs or DWNTs on the MgO support. The fluorescence and absorption spectra of the nanotube dispersion in D(2)O solution with sodium dodecyl sulfate (SDS) were studied to identify their chirality distribution. The fluorescence of the uniform-diameter SWNTs indicates the formation of the near armchair structures. On the other hand, the SWNTs synthesized over the catalyst with a high Fe loading, 3 wt %, showed a wide chirality distribution including the near zigzag structure. The synthesis of the SWNTs with a narrow diameter distribution could be applied to the selection of SWNTs with a specific chirality based on postsynthesis separation.     

Carbon nanotubes in benzene: internal and external solvation

The structure and dynamics of benzene inside and outside of single-walled carbon nanotubes (SWNTs) in the (n,n) armchair configuration are studied via molecular dynamics computer simulations. Irrespective of the nanotube diameter, benzene molecules form cylindrical solvation shell structures on the outside of the nanotubes. Their molecular planes near the SWNTs in the first external solvation shell are oriented parallel to the nanotube surface, forming a π-stacked structure between the two. By contrast, the benzene distributions in the interior of the SWNTs are found to vary markedly with the nanotube diameter. In the case of the (7,7) and (8,8) nanotubes, internal benzene forms a single-file distribution, either in a vertex-to-vertex (n = 7) or face-to-face (n = 8) orientation between two neighboring molecules. Inside a slightly wider (9,9) nanotube channel, however, a cylindrical single-shell distribution of benzene arises. A secondary solvation structure, which begins to appear inside (10,10), develops into a full structure separate from the first internal solvation shell in (12,12). The ring orientation of internal benzene is generally parallel to the nanotube wall for n = 9-12, while it becomes either slanted with respect to (n = 7), or perpendicular to (n = 8), the nanotube axis. The confinement inside the small nanotube pores exerts a strong influence on the dynamics of benzene. Both translational and rotational dynamics inside SWNTs are slower and more anisotropic than in liquid benzene. It is also found that reorientational dynamics of internal benzene deviate dramatically from the rotational diffusion regime and change substantially with the nanotube diameter.     

Cobalt-filled apoferritin for suspended single-walled carbon nanotube growth with narrow diameter distribution

Cobalt-filled apoferritin (Co-ferritin) was, for the first time, used as a wet catalyst for the synthesis of single-walled carbon nanotubes (SWNTs) with narrow diameter distribution. Co-ferritins were spin-coated and converted to cobalt nanoparticles by calcination. Using chemical vapor deposition, suspended networks of SWNTs were formed on pillar-structured substrates. The suspended SWNTs show narrow tube diameter distribution with a relatively good graphite structure. By virtue of the low diffusion coefficient of cobalt, Co-ferritin might be more useful for narrow diameter SWNTs growth than ferritins, which encase iron particles.     

Room-temperature assembly of directional carbon nanotube strings

Micromold with microchannels was employed in assembly of directional free-standing single-walled carbon nanotube (SWNT) strings at room temperature. The new postgrowth assembly approach could, in principle, apply not only to a wide range of SWNTs in their soluble or dispersible forms, including small diameter (0.7-0.8 nm) SWNTs, covalent- and noncovalent-functionalized SWNTs, monodispersed SWNTs with identical diameter and chirality, and fullerenes@SWNTs, which either cannot survive the high-temperature treatment or cannot be synthesized by current CVD method, but also to other soluble or dispersible one-dimensional nanostructures.     

Probing the Selectivity of Azomethine Imine Cycloaddition to Single‐Walled Carbon Nanotubes by Resonance Raman Spectroscopy

Selective covalent surface modification of single‐walled carbon nanotubes (SWNTs) is of great importance to various carbon nanotube‐based applications as it might offer an alternative method for enriching metallic and semiconducting nanotubes. Herein, we report on the surface modification of SWNTs through 1,3‐dipolar cycloaddition of 3‐phenyl‐phthalazinium‐1‐olate, which is a stable and reactive azomethine imine. For this reaction, microwave heating was found to be more efficient than conventional and solvent‐free heating. The sensitivity of cycloaddition to the molecular structure of SWNTs was probed using resonance Raman spectroscopy with three different laser excitations. Based on the obtained results, azomethine imine addition to the surface of nanotubes is selective for metallic and large‐diameter semiconducting SWNTs. Thermogravimetric analysis coupled with mass spectrometry showed that fragments released at high temperatures corresponded to the phenylphthalazine group, thus confirming the covalent surface functionalization. Modified SWNTs were further characterized by X‐ray photoelectron and UV/Vis‐NIR spectroscopies.     

Effect of Backbone Chemical Structure of Polymers on Selective (n,m)Single‐Walled Carbon Nanotube Recognition/Extraction Behavior

The development of a simple and facile method to extract single‐walled carbon nanotubes (SWNTs) with a specific chirality index is one of the most‐crucial issues in the fundamental study and applications of the SWNTs. We have compared the selective recognition/extraction of the SWNT chirality of poly(9,10‐dioctyl‐9,10‐dihydrophenanthrene‐2,7‐diyl) (2C8‐PPhO) to that of poly(9,9‐dioctyfluoreny1‐2,7‐diyl) (2C8‐PFO) that are able to extract specific semiconducting SWNTs free of any metallic SWNTs. Vis/NIR absorption, 2D photoluminescence, and Raman spectroscopy as well as molecular mechanical simulations were used to analyze and understand the obtained chiral selective solubilization behavior. We found that 2C8‐PPhO selectively extracts and enriches the (8,6), (8,7), and (9,7)SWNTs, whose behaviors are different from that of 2C8‐PFO, which preferentially extracts the (7,5), (7,6), (8,6), and (8,7)SWNTs. Our results indicate that 2C8‐PPhO preferably recognizes larger‐diameter SWNTs with higher chiral angles compared to those recognized by 2C8‐PFO. These findings demonstrate that the difference in the non‐aromatic ring numbers on the polymers results in different SWNT chirality recognition/extraction behaviors.     

Narrow (n,m)-distribution of single-walled carbon nanotubes grown using a solid supported catalyst

Unusually structure-selective growth of single-walled carbon nanotubes (SWNTs) has been attained using a CVD method with a solid supported catalyst. In this method, CO feedstock disproportionates on silica-supported catalytic nanoclusters of Co that are formed in situ from mixed salts of Co and Mo. The nanotube products are analyzed by spectrofluorimetry to reveal distributions resolved at the level of individual (n,m) structures. Two structures, (6,5) and (7,5), together dominate the semiconducting nanotube distribution and comprise more than one-half of that population. The average diameter of produced SWNTs is only 0.81 nm, and a strong propensity is found favoring chiral angles near the armchair limit.     

High-yield synthesis of single-wall carbon nanotubes on MCM41 using catalytic chemical vapor deposition of acetylene

High-quality single-wall carbon nanotubes (SWNTs) with narrow diameter distribution have been grown on Fe/Co-loaded MCM41 by using acetylene as the carbon source within a short reaction period, typically 10 min or less. The optimum temperature for SWNTs synthesis is 850 degrees C. Longer reaction time (i.e., 30 min) favors the formation of multiwall carbon nanotubes (MWNTs) and graphitic carbon. When the reaction time is reduced to less than 10 min, formation of MWNTs and graphitic carbon is greatly suppressed, and high-quality SWNTs dominates the yield. The surface of the as-grown SWNTs is found to be free from amorphous carbon, as observed from high-resolution transmission electron microscope (HRTEM) analysis. Raman spectral data show a G/D ratio above 10, indicating that the as-grown SWNTs have very few defects. Furthermore, radial breathing mode (RBM) analysis reveals that the diameter distribution of the current SWNTs is narrow and ranges from 0.64 to 1.36 nm.     

Assessment of chemically separated carbon nanotubes for nanoelectronics

It remains an elusive goal to obtain high performance single-walled carbon-nanotube (SWNT) electronics such as field effect transistors (FETs) composed of single- or few-chirality SWNTs, due to broad distributions in as-grown materials. Much progress has been made by various separation approaches to obtain materials enriched in metal or semiconducting nanotubes or even in single chiralties. However, research in validating SWNT separations by electrical transport measurements and building functional electronic devices has been scarce. Here, we performed length, diameter, and chirality separation of DNA functionalized HiPco SWNTs by chromatography methods, and we characterized the chiralities by photoluminescence excitation spectroscopy, optical absorption spectroscopy, and electrical transport measurements. The use of these combined methods provided deeper insight to the degree of separation than either technique alone. Separation of SWNTs by chirality and diameter occurred at varying degrees that decreased with increasing tube diameter. This calls for new separation methods capable of metallicity or chirality separation of large diameter SWNTs (in the approximately 1.5 nm range) needed for high performance nanoelectronics. With most of the separated fractions enriched in semiconducting SWNTs, nanotubes placed in parallel in short-channel (approximately 200 nm) electrical devices fail to produce FETs with high on/off switching, indicating incomplete elimination of metallic species. In rare cases with a certain separated SWNT fraction, we were able to fabricate FET devices composed of small-diameter, chemically separated SWNTs in parallel, with high on-/off-current (I(on)/I(off)) ratios up to 105 owing to semiconducting SWNTs with only a few (n,m) chiralities in the fraction. This was the first time that chemically separated SWNTs were used for short channel, all-semiconducting SWNT electronics dominant by just a few (n,m)'s. Nevertheless, the results suggest that much improved chemical separation methods are needed to produce nanotube electronics at a large scale.     

Antenna chemistry with metallic single-walled carbon nanotubes

We show that, when subjected to microwave fields, surfactant-stabilized single-walled carbon nanotubes (SWNTs) develop polarization potentials at their extremities that readily drive electrochemical reactions. In the presence of transition metal salts with high oxidation potential (e.g., FeCl3), SWNTs drive reductive condensation to metallic nanoparticles with essentially diffusion-limited kinetics in a laboratory microwave reactor. Using HAuCl4, metallic particles and sheaths deposit regioselectively at the SWNT tips, yielding novel SWNT-metal composite nanostructures. This process is shown to activate exclusively metallic SWNTs; a degree of diameter selectivity is observed using acceptors with different oxidation potentials. The reaction mechanism is shown to involve Fowler-Nordheim field emission in solution, where electric fields concentrate at the SWNT tips (attaining approximately 10(9) V/m) due to the SWNT high aspect ratio (approximately 1000) and gradient compression in the insulating surfactant monolayer. Nanotube antenna chemistry is remarkably simple and should be useful in SWNT separation and fractionation processes, while the unusual nanostructures produced could impact nanomedicine, energy harvesting, and synthetic applications.     

1,3‐Dipolar cycloadditions of Stone–Wales defective single‐walled carbon nanotubes: A theoretical study

The presence of Stone‐Wales defects in single‐walled carbon nanotubes (SWNTs) not only leads to new interesting properties, but also provides opportunities for tailoring physical and chemical properties, and expands their novel potential applications. With a two‐layered ONIOM method, 1,3‐dipolar cycloadditions (1,3‐DCs) of a series of 1,3‐dipoles (azomethine ylide, nitrone, nitrile imine, nitrile ylide, nitrile oxide, and methyl azide) with Stone‐Wales defective SWNTs have been investigated theoretically for the first time. The calculated results demonstrate that the bond c , rather than the previously focused central bond a , exhibits the highest chemical reactivity among the defective sites. More interestingly, bond c is even more reactive thermodynamically and kinetically than the perfect C? C bond in SWNTs, suggesting the feasibility of utilizing 1,3‐DC reactions to separate and purify perfect and defective SWNTs. The reactivity order for nonequivalent bonds in defective sites is different from that of [1+2] cycloaddition, indicating that the reactivity order for nonequivalent bonds depends on the kind of the chemical reactions. Except azomethine ylide, nitrile ylide and nitrile imine are found to be good candidates for 1,3‐DCs upon Stone‐Wales defective SWNTs. The SW‐ A and SW‐ B defective SWNTs show different chemical reactivity toward nitrile ylide, making it possible to purify and separate the SW‐ A and SW‐ B defective SWNTs. The SWNT diameters are found to moderately influence the 1,3‐DC reactivity of both perfect and Stone‐Wales defective SWNTs, implying that Stone‐Wales defective SWNTs with different diameter would be separated experimentally through 1,3‐DC chemistry. The above 1,3‐DC reactivity can be well understood in terms of the distortion/interaction theory, which means that instead of frontier molecular orbitals interaction energy, the distortion energy controls the chemical reactivity. © 2013 Wiley Periodicals, Inc.