New Thermostable Amylase from <Emphasis Type="Italic">Bacillus cohnii</Emphasis> US147 with a Broad pH Applicability

A new thermophilic bacterial strain identified as Bacillus cohnii US147 was isolated from the southern Tunisian soil. The identification was based on physiological tests and molecular techniques related to the 16S ribosomal ribonucleic acid. The isolated strain produced amylase, which was purified. This amylase had an apparent molecular mass of 30 kDa as estimated by sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis. Amylase US147 showed K _m and V _max values of 0.7 mg/ml and 2.2 U/ml, respectively, with starch as the substrate. The enzyme was active in acid and basic pH and had a maximal activity on starch at pH 9 and 70 °C. The enzyme was stable at pH 9 for 72 h and retained half of its activity after incubation at 70 °C for 150 min. A partially inhibition (15%, 25%, 23%, 20%, and 22%) was obtained with 1 mM SDS, 1 mM NaBO₃, 1 mM H₂O_2, 1 mM Zn⁺², and 5 mM ethylenediamine tetraacetic acid (EDTA), respectively. The amylase recovered its original activity by the addition of 10 mM Ca ²⁺ to the 5 mM EDTA. These properties indicated a possible use of this amylase in starch saccharification, in detergent, and in other industrial applications.     

Purification and Characterization of Extracellular Inulinase from a Marine Yeast <Emphasis Type="Italic">Cryptococcus aureus</Emphasis> G7a and Inulin Hydrolysis by the Purified Inulinase

The extracellular inulinase in the supernatant of the cell culture of the marine yeast Cryptococcus aureus G7a was purified to homogeneity with a 7.2-fold increase in specific inulinase activity compared to that in the supernatant by ultrafiltration, concentration, gel filtration chromatography (Sephadex™ G-75), and anion exchange chromatography (DEAE sepharose fast flow anion exchange). The molecular mass of the purified enzyme was estimated to be 60.0 kDa. The optimal pH and temperature of the purified enzyme were 5.0 and 50 °C, respectively. The enzyme was activated by Ca²⁺, K⁺, Na⁺, Fe²⁺, and Zn²⁺. However, Mg²⁺, Hg²⁺, and Ag⁺ acted as inhibitors in decreasing the activity of the purified inulinase. The enzyme was strongly inhibited by phenylmethanesulphonyl fluoride (PMSF), iodoacetic acid, EDTA, and 1,10-phenanthroline. The K _m and V _max values of the purified enzyme for inulin were 20.06 mg/ml and 0.0085 mg/min, respectively. A large amount of monosaccharides were detected after the hydrolysis of inulin with the purified inulinase, indicating the purified inulinase had a high exoinulinase activity.     

Purification and Characterization of Thermostable α-Galactosidase from <Emphasis Type="Italic">Aspergillus terreus</Emphasis><Subscript>GR</Subscript>

An extracellular thermostable α-galactosidase producing Aspergillus terreus _GR strain was isolated from soil sample using guar gum as sole source of carbon. It was purified to apparent homogeneity by acetone precipitation, gel filtration followed by DEAE-Sephacel chromatographic step. The purified enzyme showed a single band after sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The molecular weight of the purified enzyme after SDS-PAGE was 108 kDa. The enzyme showed optimum pH and temperature of 5.0 and 65 °C, respectively, for artificial substrate pNPαGal. α-Galactosidase from A. terreus _GR is found to be thermostable, as it was not inactivated after heating at 65 °C for 40 min. The K _m for pNPαGal, oNPαGal, raffinose, and stachyose are 0.1, 0.28, 0.42, and 0.33 mM, respectively. Inhibitors such as 1,10-phenanthroline, phenylmethylsulfonyl fluoride, ethylenediaminetetraacetic acid, mercaptoethanol, and urea have no effect, whereas N-bromosuccinamide inhibited enzyme activity by 100%. Among metal ions tested, Mg²⁺, Ni²⁺, Ca²⁺, Co²⁺, and Mn²⁺ had no effect on enzyme activity, but Ag⁺, Hg²⁺, and Cu²⁺ have inhibited complete activity.     

A Moderately Thermostable Alkaline Phosphatase from Geobacillus thermodenitrificans T2: Cloning, Expression and Biochemical Characterization

A gene-encoding alkaline phosphatase (AP) from thermophilic Geobacillus thermodenitrificans T2, termed Gtd AP, was cloned and sequenced. The deduced Gtd AP protein comprises 424 amino acids and shares a low homology with other known AP (<35% identity), while it exhibits the conservation of the active site and structure element of Escherichia coli AP. The Gtd AP protein, without a predicted signal peptide of 30 amino acids, was successfully overexpressed in E. coli and purified as a hexa-His-tagged fusion protein. The pH and temperature optima for purified enzyme are 9.0 and 65 °C, respectively. The enzyme retained a high activity at 45–60 °C, while it could be quickly inactivated by a heat treatment at 80 °C for 15 min, exhibiting a half-life of 8 min at 70 °C. The K _m and V _max for pNPP were determined to be 31.5 μM and 430 μM/min at optimal conditions. A divalent cation is essential, with a combination of Mg²⁺ and Co²⁺ or Zn²⁺ preferred. The enzyme was strongly inhibited by 10 mM ethylenediaminetetraacetic acid (EDTA) and vanadate but highly resistant to urea and dithiothreitol. The properties of Gtd AP make it suitable for application in molecular cloning or amplification.     

Optimization of ammonium nitrate concentration in single-stage continuous cultures of Aspergillus niger with biomass retention

The effect of ammonium nitrate concentration in the citric acid biosynthesis by Aspergillus niger NC-12 in single-stage continuous cultures with biomass retention was investigated. Experiments were carried out in a BIOMER laboratory fermenter with 5 dm³ working volume. At the initial stage of each cultivation, the substrate in the bioreactor contained 1.5 g NH₄NO₃ dm⁻³. After 120 h onwards, the bioreactor was fed continuously at a constant dilution rate of 0.009 h⁻¹. NH₄NO₃ concentration in the feed was varied from one culture to another, ranging between 0.5 g dm⁻³ and 2.5 g dm⁻³. Promising results were obtained when NH₄NO₃ concentration of 1.5 g dm⁻³ was used. The observed concentration of citric acid (c _P) and yield of citric acid with respect to the introduced sucrose (Y _P/S) were 117.88 g dm⁻³ and 78.59 %, respectively. The efficiency coefficient of citric acid biosynthesis (K _ef) was very high, amounting to 83.38. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Purification and Partial Characterization of Lignin Peroxidase from <Emphasis Type="Italic">Acinetobacter calcoaceticus</Emphasis> NCIM 2890 and Its Application in Decolorization of Textile Dyes

Lignin peroxidase was purified (72-fold) from Acinetobacter calcoaceticus NCIM 2890. The purified lignin peroxidase (55–65 kDa) showed dimeric nature. The maximum enzyme activity was observed at pH 1.0, between a broad temperature range of 50 and 70°C, at H₂O₂ concentration (40 mM) and the substrate concentration (n-propanol, 100 mM). Purified lignin peroxidase was able to oxidize a variety of substrates including Mn²⁺, tryptophan, mimosine, l-Dopa, hydroquinone, xylidine, n-propanol, veratryl alcohol, and ten textile dyes of various groups indicating as a versatile peroxidase. Most of the dyes decolorized up to 90%. Tryptophan stabilizes the lignin peroxidase activity during decolorization of dyes.     

Highly Thermostable Xylanase of the Thermophilic Fungus Talaromyces thermophilus: Purification and Characterization

A thermostable xylanase from a newly isolated thermophilic fungus Talaromyces thermophilus was purified and characterized. The enzyme was purified to homogeneity by ammonium sulfate precipitation, diethylaminoethyl cellulose anion exchange chromatography, P-100 gel filtration, and Mono Q chromatography with a 23-fold increase in specific activity and 17.5% recovery. The molecular weight of the xylanase was estimated to be 25kDa by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and gel filtration. The enzyme was highly active over a wide range of pH from 4.0 to 10.0. The relative activities at pH5.0, 9.0, and 10.0 were about 80%, 85.0%, and 60% of that at pH7.5, respectively. The optimum temperature of the purified enzyme was 75°C. The enzyme showed high thermal stability at 50°C (7days) and the half-life of the xylanase at 100°C was 60min. The enzyme was free from cellulase activity. K _m and V _max values at 50°C of the purified enzyme for birchwood xylan were 22.51mg/ml and 1.235μmol min⁻¹ mg⁻¹, respectively. The enzyme was activated by Ag⁺, Co²⁺, and Cu²⁺; on the other hand, Hg²⁺, Ba²⁺, and Mn²⁺ inhibited the enzyme. The present study is among the first works to examine and describe a secreted, cellulase-free, and highly thermostable xylanase from the T. thermophilus fungus whose application as a pre-bleaching aid is of apparent importance for pulp and paper industries.     

Purification, characterization, and structural investigation of a new moderately thermophilic and partially calcium-independent extracellular α-amylase from Bacillus sp. TM1

A new α-amylase was extracted from a recently found strain of Bacillus sp. and purified by ion-exchange chromatography. Sodium dodecyl sulfate polyacrylamide gel electrophoresis showed a single band for the purified enzyme with an apparent molecular weight of 59 kDa. The optimum temperature and pH range of the enzyme were 40–60°C and 4.5–7.5, respectively, and its activation energy was 1.974 kcal/mol. The K _m value for the enzyme activity on solubie starch was 4 mg/mL, and the T _m values obtained from the circular dichroism (CD) results of thermal unfolding were 78.7 and 80.2°C in the absence and presence of the calcium, respectively. The enzyme was almost completely inhibited by the addition of Fe³⁺, Mn²⁺, and Zn²⁺ and was activated by EDTA, Cr³⁺, and Al³⁺. Moreover, it was partially inhibited by Ca²⁺, Ba²⁺, Ni²⁺, and Co²⁺. Proteolytic digestion of the enzyme using trypsin combined with results from T _m using CD and irreversible thermoinactivation suggests that this enzyme can be considered a moderate thermophile with both mild flexibility and rigidity.     

Cloning and expression of the gene for xylose isomerase fromThermus flavus AT62 inEscherichia coli

The gene encoding xylose isomerase (xylA) was cloned fromThermus flavus AT62 and the DNA sequence was determined. ThexylA gene encodes the enzyme xylose isomerase (XI orxylA) consisting of 387 amino acids (calculated Mr of 44,941). Also, there was a partial xylulose kinase gene that was 4 bp overlapped in the end of XI gene. The XI gene was stably expressed inE. coli under the control oftac promoter. XI produced inE. coli was simply purified by heat treatment at 90°C for 10 min and column chromatography of DEAE-Sephacel. The Mr of the purified enzyme was estimated to be 45 kDa on SDS-polyacrylamide gel electrophoresis. However, Mr of the cloned XI was 185 kDa on native condition, indicating that the XI consists of homomeric tetramer. The enzyme has an optimum temperature at 90°C. Thermostability tests revealed that half life at 85°C was 2 mo and 2 h at 95°C. The optimum pH is around 7.0, close to where by-product formation is minimal. The isomerization yield of the cloned XI was about 55% from glucose, indicating that the yield is higher than those of reported enzymes. The Km values for various sugar substrates were calculated as 106 mM for glucose. Divalent cations such as Mn²⁺, Co²⁺, and Mg²⁺ are required for the enzyme activity and 100 mM EDTA completely inhibited the enzyme activity.     

Purification and Characterization of a Novel β-Galactosidase with Transglycosylation Activity from <Emphasis Type="Italic">Bacillus megaterium</Emphasis> 2-37-4-1

A novel β-galactosidase of 120 kDa (BgaBM) from Bacillus megaterium 2-37-4-1 was purified, and its gene (bgaBM) was analyzed and expressed. It displayed wide acceptor specificity for transglycosylation with a series of acceptors, including pentose, hexose, hydroxyl, and alkyl alcohol using o-nitrophenyl-β-d-galactoside (ONPG) as a donor. BgaBM preferentially hydrolyzed ONPG in all tested substrates and showed maximum activity at pH 7.5–8.0 and 55 °C. It was stable at pH 6.0–9.0 below 40 °C. The K _m and V _max values for ONPG and lactose were 9.5 mM, 16.6 mM/min and 12.6 mM, 54.4 mM/min, respectively. The nucleotide sequence of the bgaBM gene consists of an ORF of 3,105 bp corresponding to 118 kDa protein, which indicates that BgaBM is a modular enzyme in the glycosyl hydrolase family 2, including conserved sugar-binding domain, acid–base catalyst, and immunoglobulin-like beta-sandwich domain. The possible acid/base and nucleophile sites of BgaBM were estimated to be E481 and E547, respectively. Furthermore, expression of the bgaBM gene in Escherichia coli and purification of the recombinant enzyme were performed. The recombinant enzyme showed similar biochemical characteristics to natural enzyme.     

Purification and Characterization of Thermostable Chitinase from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> SK-1

Chitinase was purified from the culture medium of Bacillus licheniformis SK-1 by colloidal chitin affinity adsorption followed by diethylamino ethanol-cellulose column chromatography. The purified enzyme showed a single band on sodium dodecyl sulfate polyacrylamide gel electrophoresis. The molecular size and pI of chitinase 72 (Chi72) were 72 kDa and 4.62 (Chi72) kDa, respectively. The purified chitinase revealed two activity optima at pH 6 and 8 when colloidal chitin was used as substrate. The enzyme exhibited activity in broad temperature range, from 40 to 70°C, with optimum at 55°C. It was stable for 2 h at temperatures below 60°C and stable over a broad pH range of 4.0–9.0 for 24 h. The apparent K _m and V _max of Chi72 for colloidal chitin were 0.23 mg ml⁻¹ and 7.03 U/mg, respectively. The chitinase activity was high on colloidal chitin, regenerated chitin, partially N-acetylated chitin, and chitosan. N-bromosuccinamide completely inhibited the enzyme activity. This enzyme should be a good candidate for applications in the recycling of chitin waste.     

Production of citric acid using immobilized conidia of Aspergillus niger

Conidia of Aspergillus niger were immobilized in calcium alginate gel for the production of citric acid. First, the type of the preactivation medium, together with the preactivation period, was investigated. It was found that A. niger requires a 2-d preactivation period at a 0.05 g/L NH₄NO₃ concentration. Second, preactivated cells were used to determine the effects of nitrogen concentration and the flow rate of oxygen and air on the production of citric acid. Maximum citric acid production was attained with medium containing 0.01 g/L of NH₄NO₃. The rate of citric acid production in the nitrogenous medium was 33% higher when oxygen was used instead of air during the production phase. This corresponds to an increase of 85% when compared to production when neither oxygen nor air was fed into the system. In the nonnitrogenous medium citric acid concentration remained similar regardless of the use of air or oxygen. However, in the nonnitrogenous production medium, citric acid production was not influenced considerably when oxygen was used instead of air. The advantage of using immobilized cells is that production is achieved easily in the continuous system. Therefore, citric acid production was also tested using a packed-bed bioreactor, and an increase in productivity by a factor of 22 was achieved compared to the batch system.     

Purification and Characterization of a Novel Heparin Degrading Enzyme from <Emphasis Type="Italic">Aspergillus flavus</Emphasis> (MTCC-8654)

A heparinase-producing fungus was isolated, and the strain was taxonomically characterized as Aspergillus flavus by morphophysiological and 26S rRNA gene homology studies. The culture produced intracellular heparinase enzyme, which was purified 40.5-fold by DEAE-Sephadex A-50, CM-Sephadex C-50, and Sephadex G-100 column chromatography. Specific activity of the purified enzyme was found to be 44.6 IU/μg protein and the molecular weight of native as well as reduced heparinase was 24 kDa, showing a monomeric unit structure. Peptide mass spectrum showed poor homogeneity with the database in the peptide bank. The enzyme activity was maximum at 30 °C in the presence of 300 mM NaCl at pH 7.0. In the presence of Co²⁺, Mn²⁺ ions, and reducing agents (β-mercaptoethanol, dithiothreitol), enzyme activity was enhanced and inhibited by iodoacetic acid. These observations suggested that free sulfohydryl groups of cysteine residues were necessary for catalytic activity of the enzyme. The enzyme was also inhibited by histidine modifier, DEPC, which suggests that along with cysteine, histidine may be present at its active site. The enzyme showed a high affinity for heparin as a substrate with K _m and V _max as 2.2 × 10⁻⁵ M and 30.8 mM min⁻¹, respectively. The affinity of the enzyme for different glycosaminoglycans studied varied, with high substrate specificity toward heparin and heparin-derived polysaccharides. Depolymerization of heparin and fractionation of the oligosaccharides yielded heparin disaccharides as main product.     

Recombination System Based on Cre α Complementation and Leucine Zipper Fusions

A gene encoding β-1,3-1,4-glucanase was cloned by polymerase chain reaction (PCR) from Bacillus subtilis MA139. Sequencing result showed 97% homology to the corresponding gene from Bacillus licheniformis. The open reading frame (ORF) of the gene contained 690 bp coding for a 226 amino-acid matured protein with the estimated molecular weight of 24.44 kDa. The β-1,3-1,4-glucanase gene was subcloned into an expression vector of pET28a and expressed in Escherichia coli BL21 and then purified by metal affinity chromatography using a nickel–nitrilotriacetic acid (Ni–NTA) column. The purified β-1,3-1,4-glucanase demonstrated 24.05 and 12.52 U ml^-1 activities for the substrates of barley β-glucan and lichenan, respectively, and the specific activities were 728.79 and 379.1 U mg^-1 for them, respectively. The optimal temperature and pH of the purified enzyme were 40°C and 6.4, respectively. When barley β-glucan was used as the substrate, K _m was 5.34 mg ml^-1, and K _cat showed 7,206.71 S^-1, thus the ratio of K _cat and K _m was 1,349.67 ml s^-1 mg^-1. The activity of β-1,3-1,4-glucanase was affected by a range of metal ions or ethylenediaminetetraacetic acid (EDTA).     

Purification and characterization of an exoinulinase from Aspergillus fumigatus

An extracellular exoinulinase was purified from the crude extract of Aspergillus fumigatus by ammonium sulfate precipitation, followed by successive chromatographies on DEAE-Sephacel, Sephacryl S-200, concanavalin A-linked amino-activated silica, and Sepharose 6B columns. The enzyme was purified 25-fold, and the specific activity of the purified enzyme was 171 IU/mg of protein. Gel filtration chromatography revealed a molecular weight of about 200 kDa, and native polyacrylamide gel electrophoresis (PAGE) showed an electrophoretic mobility corresponding to a molecular weight of about 176.5 kDa. Sodium dodecyl sulfate-PAGE analysis revealed three closely moving bands of about 66, 62.7, and 59.4 kDa, thus indicating the heterotrimeric nature of this enzyme. The purified enzyme appeared as a single band on isoelectric focusing, with a pI of about 8.8. The enzyme activity was maximum at pH 5.5 and was stable over a pH range of 4.0–9.5, and the optimum temperature for enzyme activity was 60°C. The purified enzyme retained 35.9 and 25.8% activities after 4 h at 50 and 55°C, respectively. The inulin hydrolysis activity was completely abolished with 1 mM Hg⁺⁺, whereas EDTA inhibited about 63% activity. As compared to sucrose, stachyose, and raffinose, the purified enzyme had lower K _m (0.25 mM) and higher V _max (333.3 IU/mg) values for inulin.     

Characterization of Cyclodextrin Glucanotransferase Produced by <Emphasis Type="Italic">Bacillus megaterium</Emphasis>

Cyclodextrin glucanotransferase, produced by Bacillus megaterium, was characterized, and the biochemical properties of the purified enzyme were determined. The substrate specificity of the enzyme was tested with different α-1,4-glucans. Cyclodextrin glucanotransferase displayed maximum activity in the case of soluble starch, with a K _m value of 3.4 g/L. The optimal pH and temperature values for the cyclization reaction were 7.2 and 60 °C, respectively. The enzyme was stable at pH 6.0–10.5 and 30 °C. The enzyme activity was activated by Sr²⁺, Mg²⁺, Co²⁺, Mn²⁺, and Cu²⁺, and it was inhibited by Zn²⁺and Ag⁺. The molecular mass of cyclodextrin glucanotransferase was established to be 73,400 Da by sodium dodecyl sulfate–polyacrylamide gel electrophoresis, 68,200 Da by gel chromatography, and 75,000 Da by mass spectrometry. The monomer form of the enzyme was confirmed by the analysis of the N-terminal amino acid sequence. Cyclodextrin glucanotransferase formed all three types of cyclodextrins, but the predominant product was β-cyclodextrin.     

Purification, characterization, kinetic properties, and thermal behavior of extracellular polygalacturonase produced by filamentous fungus Tetracoccosporium sp

For the first time, a polygalacturonase from the culture broth of Tetracoccosporium sp. was isolated and incubated at 30°C in an orbital shaker at 160 rpm for 48h. The enzyme was purified by ammonium sulfate precipitation and two-step ion-exchange chromatography and had an apparent molecular mass of 36 kDa, as shown by sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis. Its optimum activity was at pH 4.3 and 40°C, and the K _m and V _max values of this enzyme (for polygalacturonic acid) were 3.23 mg/mL and 0.15 μmol/min, respectively. Ag⁺, Co²⁺, EDTA, Tween-20, Tween-80, and Triton X-100 stimulated polygalacturonase activity whereas Al³⁺, Ba²⁺, Ca²⁺, Fe²⁺, Fe³⁺, Ni²⁺, Mg²⁺, Mn²⁺, and SDS inhibited it. In addition, iodoacetamide and iodoacetic acid did not inhibit enzyme activity at a concentration of 1 mM, indicating that cysteine residues are not part of the catalytic site of polygalacturonase. We studied the kinetic properties and thermal inactivation of polygalacturonase. This enzyme exhibited a t _1/2 of 63 min at 60°C and its specific activity, turnover number, and catalytic efficiency were 6.17 U/mg, 113.64 min⁻¹, and 35.18 mL/(min·mg), respectively. The activation energy (ΔE ^#) for heat inactivation was 5.341 kJ/mol, and the thermodynamic activation parameters ΔG ^#, ΔH ^#, and ΔS ^# were also calculated, revealing a potential application for the industry.     

Prokaryotic Expression, Purification and Characterization of Aspergillus sulphureus β-Mannanase and Site-Directed Mutagenesis of the Catalytic Residues

Wild type (WT) DNA sequence, which encoded a mature β-mannanase of Aspergillus sulphureus, composed of 1,152 nucleotides (nt), was amplified from pUCm-T-mann by polymerase chain reaction (PCR). Based on this DNA fragment, mutants designated as E²⁰⁶G and E³¹⁴G were constructed by overextension PCR (OE-PCR). Glutamic acids of the 206th and 314th sites in the amino acid sequence of β-mannanase were separately replaced by glycine in these two mutants. The WT and mutant genes were ligated into prokaryotic vector pET-28a (+) and transformed into the Escherichia coli BL21 strain, respectively. The recombinant enzyme proteins were expressed by IPTG induction and detected by Western blot. The recombinant proteins purified with Ni-NTA column were dialyzed to correctly refold. The WT recombinant β-mannanase showed optimal activity at 50 °C and pH 2.4. The kinetic parameters of K _m and V _max for purified β-mannanase were 1.38 mg/ml and 72.99 U/mg, respectively. However, the mutant proteins did not show any activity. It was demonstrated that E²⁰⁶ and E³¹⁴ were the catalytic residues of β-mannanase.     

Purification and Characterization of a Hyperthermostable and High Maltogenic α-Amylase of an Extreme Thermophile <Emphasis Type="Italic">Geobacillus thermoleovorans</Emphasis>

The purified α-amylase of Geobacillus thermoleovorans had a molecular mass of 26 kDa with a pI of 5.4, and it was optimally active at 100 °C and pH 8.0. The T _1/2 of α-amylase at 100 °C increased from 3.6 to 5.6 h in the presence of cholic acid. The activation energy and temperature quotient (Q ₁₀) of the enzyme were 84.10 kJ/mol and 1.31, respectively. The activity of the enzyme was enhanced strongly by Co²⁺ and Fe²⁺; enhanced slightly by Ba²⁺, Mn²⁺, Ni²⁺, and Mg²⁺; inhibited strongly by Sn²⁺, Hg²⁺, and Pb²⁺, and inhibited slightly by EDTA, phenyl methyl sulfonyl fluoride, N-ethylmaleimide, and dithiothreitol. The enzyme activity was not affected by Ca²⁺ and ethylene glycol-bis (β-amino ethyl ether)-N,N,N,N-tetra acetic acid. Among different additives and detergents, polyethylene glycol 8000 and Tween 20, 40, and 80 stabilized the enzyme activity, whereas Triton X-100, glycerol, glycine, dextrin, and sodium dodecyl sulfate inhibited to a varied extent. α-Amylase exhibited activity on several starch substrates and their derivatives. The K _m and K _cat values (soluble starch) were 1.10 mg/ml and 5.9 × 10³ /min, respectively. The enzyme hydrolyzed raw starch of pearl millet (Pennisetum typhoides) efficiently.     

Electrocatalytic behaviour of citric acid at a cobalt phthalocyanine-modified screen-printed carbon electrode and its application in pharmaceutical and food analysis

Cobalt phthalocyanine-modified screen-printed carbon electrodes (CoPC-SPCEs) have been investigated as disposable sensors for the measurement of citric acid. The analyte was found to undergo an electrocatalytic oxidation process involving the Co²⁺/Co³⁺ redox couple. Calibration plots were found to be linear in the range 2 mM to 2.0 M; replicate determinations of a 5.2 mM citric acid (n = 4) solution gave a coefficient of variation of 1.43%. Additions of metal ions, such as Ag⁺, Pb²⁺, Cu²⁺, Fe³⁺ and Ca²⁺, were found not to interfere. The effects of hesperidin, cysteine, ethylenediaminetetraacetic acid (EDTA), ascorbic, formic, malic, malonic, tartaric, oxalic and trichloroacetic acids on the determination of citric acid were examined and, under the conditions employed, only oxalic acid and EDTA were found to give any significant interference. The sensors were evaluated by carrying out citric acid determinations on spiked and unspiked samples of an acid citrate dextrose (ACD) formulation, lime flesh and juice. For lime juice, recoveries were calculated to be 96.8% (% CV = 2.7%) for a sample fortified with 5% citric acid and for ACD 99.4% (%CV = 2.6%) when fortified at 2.30% citric acid. Further studies showed the possibility of determining citric acid concentrations in lime juice and fruit directly, without the need for an added electrolyte. These performance characteristics indicate that reliable data may be obtained for citric acid measurements in such samples. To our knowledge, this is the first report on the electrocatalytic oxidation of citric acid and its application using a CoPC-SPCE.