Structural stabilities and band structure characteristics of platinum nitride (PtN) via first-principles calculations

The structural phase transformations of the PtN compound with a 1:1 stoichiometric ratio of Pt:N were investigated using the framework of density functional theory (DFT). The full potential linearized augmented plane wave (FP-LAPW) method within the generalized gradient (PBE-GGA) and the Engel–Vosko generalized gradient (EV-GGA) approximations were used. A comparative study of the experimental and theoretical results is provided on the structural properties of zinc-blende (ZB), rock-salt (RS), cesium chloride (CsCl), wurtzite (WZ), nickel arsenide (NiAs), lead monoxide (PbO), and tungsten carbide (WC) phases. The calculated band structure using the modified version of the Becke and Johnson (mBJ) exchange potential reveals the metallic character of the PtN compound. The present study also shows that the PtN compound crystallizes in the WZ phase under ambient conditions. The theoretical transition pressures from WZ to RS, NiAs, PbO, and CsCl transformations are found to be 9.441 GPa, 7.705 GPa, 18.345 GPa and 31.9 GPa, respectively, using the PBE-GGA method.     

Theoretical investigation of the structural stabilities,elastic properties and band structure characteristics of platinum carbide

Ab initio calculations based on the density functional theory within the full-potential linearized augmented plane wave method were carried out to investigate the structural stabilities of the different crystallographic phases, the pressure-induced phase transition and the electronic properties of the platinum carbide (PtC) compound. The zinc-blende (ZB), rock-salt (RS), cesium chloride (CsCl), wurtzite (WZ), nickel arsenide (NiAs), lead monoxide (PbO) and the tungsten carbide (WC) phases were considered. The exchange and correlation potential was treated by the generalized-gradient approximation using the Perde–Burke–Ernzerhof parameterization. The thermodynamic properties such as variation of the bulk modulus, lattice constant, heat capacity, thermal expansion and Debye temperature versus pressures and temperatures are investigated. The band structure results show the metallic character of the PtC compound in all the considered phases and the present study also shows that the PtC compound crystallizes in the ZB phase at ambient conditions. The theoretical transition pressures from the ZB to RS for the NiAs, PbO and CsCl transformations were also computed.     

Elastic and thermodynamic properties of alkali hydrides XH (X = K,Rb and Cs)

The calculation of the structural, mechanical and thermodynamic properties of the alkali hydrides XH (X?=?K, Rb and Cs) in rock-salt (RS), cesium chloride (CsCl), zinc-blende (ZB) and wurtzite (WZ) phases are done by using the full-potential linearized augmented plane wave (FP-LAPW) method within the frame work of the density functional theory (DFT) as implemented in the WIEN2K code. The Perdew–Burke–Ernzerhof generalized gradient approximation (PBE-GGA) was used for the exchange-correlation potential.The elastic constants and their related properties, as well as the thermodynamic properties, were obtained by using the IRelast package. The calculated elastic constants for the alkali hydrides, with the four structures RS, CsCl, ZB and WZ, at ambient pressure are mechanically stable. The elastic constants and their related properties in the RS structure are changeable with increasing pressure. Elastic constants, bulk modulus, shear modulus (stiffness) and Debye temperatures of these compounds are decreased as going from K to Cs in the periodic table. These compounds in the RS structure are mechanically stronger at ambient conditions.     

GaAs相变和热力学性质的密度泛函理论研究

利用平面波赝势密度泛函方法,对GaAs从闪锌矿结构到CsCl 结构的相变进行了理论研究.通过Birch-Murnaghan状态方程拟合闪锌矿结构GaAs的能量和体积,得到了GaAs的热力学性质.我们发现对 GaAs来说,闪锌矿结构通常比CsCl结构稳定,由闪锌矿结构到CsCl结构的相变压力在37.019 GPa左右.计算所得到的晶格常数、体弹模量及体弹模量对压强的一阶导数与实验值以及其他作者的计算值相符合.     

Electronic structure engineering of ZnO with the modified Becke–Johnson exchange versus the classical correlation potential approaches

In this study, we report investigations of structural and electronic properties of ZnO in wurtzite (WZ), rock salt (RS) and zinc-blende (ZB) phases. Calculations have been done with full-potential linearized augmented plane wave plus local orbital method developed within the frame work of Density Functional Theory (DFT). For structural properties investigations, Perdew and Wang proposed local density approximations (LDA) and Perdew et al. proposed generalized gradient approximations (GGA) have been applied. Where for electronic properties in addition to these, Tran–Blaha modified Becke–Johnson (mBJ) potential has been used. Our computed band gap values of ZnO in WZ and ZB phases with mBJ potential are significantly improved compared to those with LDA and GGA; however, in RS phase, energy gap is significantly overestimated compared to experimental measurements. The Zn-d band was found to be more narrower with mBJ potential than that of LDA and GGA. On the other hand, our evaluated crystal field splitting energy values overestimate the experimental values.     

Structural stability,electronic structure and mechanical properties of 4d transition metal nitrides TMN (TM=Ru,Rh, Pd)

Ab initio calculations are performed to investigate the structural stability, electronic, structural and mechanical properties of 4d transition metal nitrides TMN (TM=Ru, Rh, Pd) for five different crystal structures, namely NaCl, CsCl, zinc blende, NiAs and wurtzite. Among the considered structures, zinc blende structure is found to be the most stable one among all three nitrides at normal pressure. A structural phase transition from ZB to NiAs phase is predicted at a pressure of 104 GPa, 50.5 GPa and 56 GPa for RuN, RhN and PdN respectively. The electronic structure reveals that these nitrides are metallic. The calculated elastic constants indicate that these nitrides are mechanically stable at ambient condition.     

Phase stability and electronic behavior of MgS,MgSe and MgTe compounds

Ab initio calculations based on density functional theory using the full-potential linearized augmented plane wave method have been carried out to find the structural stability of different crystallographic phases, the pressure-induced phase transition and the electronic properties of the magnesium chalcogenides MgS, MgSe and MgTe. The zinc blende (B3), wurtzite (B4), rock salt (B1), CsCl (B2), NiAs (B8), β-BeO, 5-5 and TiP crystal structures are considered and the exchange and correlation potential is treated by the generalized-gradient approximation using the Perdew–Burke–Ernzerhof parameterization. Moreover, the modified Becke-Johnson (mBJ) scheme is also applied to optimize the corresponding potential for the band structure calculations. Results show that the wurtzite phase is the stable structure in the ground state adopted by MgSe and MgTe compounds while MgS adopts the rock-salt one. Moreover, the band structure calculations reveal a metallic behavior in the CsCl structure for all the compounds, whereas for the other structures, a semiconducting behavior is observed.     

First principles study of the structural,electronic, mechanical and superconducting properties of WX (X=C,N)

The structural, electronic, mechanical and superconducting properties of tungsten carbide (WC) and tungsten nitride (WN) are investigated using first principles calculations based on density functional theory (DFT). The computed ground state properties, such as equilibrium lattice constant and cell volume, are in good agreement with the available experimental data. A pressure induced structural phase transition is observed in both tungsten carbide and nitride, from a tungsten carbide phase (WC) to a zinc blende phase (ZB), and from a zinc blende phase (ZB) to a wurtzite phase (WZ). The electronic structure reveals that these materials are metallic at ambient conditions. The calculated elastic constants obey the Born-Huang criteria, suggesting that they are mechanically stable at normal and high pressure. Also, the superconducting transition temperature is estimated for the WC and WN in stable structures at atmospheric pressure.     

First principles study of structural stability,electronic structure and mechanical properties of ReN and TcN

The crystal structure, structural stability, electronic and mechanical properties of ReN and TcN are investigated using first principles calculations. We have considered five different crystal structures: NaCl, zinc blende (ZB), NiAs, tungsten carbide (WC) and wurtzite (WZ). Among these ZB phase is found to be the lowest energy phase for ReN and TcN at normal pressure. Pressure induced structural phase transitions from ZB to WZ phase at 214 GPa in ReN and ZB to NiAs phase at 171 GPa in TcN are predicted. The electronic structure reveals that both ReN and TcN are metallic in nature. The computed elastic constants indicate that both the nitrides are mechanically stable. As ReN in NiAs phase has high bulk and shear moduli and low Poisson's ratio, it is found to be a potential ultra incompressible super hard material.     

第一性原理研究硫化镉高压相变及其电子结构与弹性性质

采用第一性原理研究了CdS的六方纤锌矿(WZ), 立方闪锌矿(ZB) 和岩盐矿(RS)相在高压条件下的相稳定性、 相变点、电子结构以及弹性性能.WZ相与RS 相可以在相应的压强范围内稳定存在, 而ZB相不能稳定存在.压强大于2.18 GPa时, WZ相向RS相发生金属化相变.WZ相中S原子电负性大于Cd, 且电负性差值小于1.7, CdS的WZ相为共价晶体.高压作用下, S原子半径被强烈压缩, 有效核电荷增加, 对层外电子吸引能力提高, 电负性急剧增大, 导致S与Cd的电负性差值大于1.7, CdS的RS相以离子晶体存在. WZ相的C₄₄随压强增加呈下降趋势, 导致WZ相力学不稳定, 并向RS相转变.当压强大于2.18 GPa时, RS相C₁₁, C₁₂随压强增加而增大, 并且C₄₄保持稳定, 说明RS相具有良好的高压稳定性与力学性能. 关键词： 第一性原理 相变 电子结构 弹性性质     

ZnTe结构相变、电子结构和光学性质的研究

运用密度泛函理论体系下的投影缀加波方法, 对闪锌矿和朱砂相结构的ZnTe在高压下的状态方程和结构相变进行了研究, 并分析了相变前后的原胞体积、电子结构和光学性质. 结果表明: 闪锌矿结构转变为朱砂相结构的相变压力为8.6 GPa, 并没有出现类似材料高压导致的金属化现象, 而是表现出间接带隙半导体特性. 相变后, 朱砂相结构Zn和Te原子态密度分布均向低能级方向移动, 带隙变小; 轨道杂化增强, 更有利于Te 5p与Zn 3d间的电子跃迁, 介电常数虚部主峰明显增强, 但宏观介电常数不受压力的影响.     

Dynamical stability and phase transition of ZrC under pressure

A comprehensive first principles study of structural, elastic, electronic, and phonon properties of zirconium carbide (ZrC) is reported within the density functional theory scheme. The aim is to primarily focus on the vibrational properties of this transition metal carbide to understand the mechanism of phase transition. The ground state properties such as lattice constant, elastic constants, bulk modulus, shear modulus, electronic band structure, and phonon dispersion curves (PDC) of ZrC in rock-salt (RS) and high-pressure CsCl structures are determined. The pressure-dependent PDCs are also reported in NaCl phase. The phonon modes become softer and finally attain imaginary frequency with the increase of pressure. The lattice degree of freedom is used to explain the phase transition. Static calculations predict the RS to CsCl phase transition to occur at 308?GPa at 0?K. Dynamical calculations lower this pressure by about 40?GPa. The phonon density of states, electron–phonon interaction coefficient, and Eliashberg's function are also presented. The calculated electron–phonon coupling constant λ and superconducting transition temperature agree reasonably well with the available experimental data.     

ZnS结构相变、电子结构和光学性质的研究

运用第一性原理平面波赝势和广义梯度近似方法, 对闪锌矿结构(ZB)和氯化钠结构(RS) ZnS的状态方程及其在高压下的相变进行计算研究, 分析相变点附近的电子态密度、能带结构和光学性质的变化机理. 结果表明: 通过状态方程得到ZB相到RS相的相变压强值为18.1 GPa, 而利用焓相等原理得到的相变压强值为18.0 GPa; 在结构相变过程中, sp³轨道杂化现象并未消失, RS相ZnS的金属性明显增强; 与ZB相ZnS相比, RS相ZnS的介电常数主峰明显增强, 并向低能方向出现了明显偏移, 使得介电峰向低能方向拓展, 在低能区电子跃迁大大增强. 关键词： 硫化锌 相变 电子结构 光学性质     

Electronic structure calculations of lead chalcogenides PbS, PbSe, PbTe

In this work, we have extended our study of the mechanical properties and the electronic structure of PbTe to include other Pb chalcogenide compounds (PbSe, PbS). The calculations were performed self-consistently using the scalar-relativistic full-potential linearized augmented plane wave method. Both the local density approximation (LDA) and the generalized gradient approximation (GGA) to density-functional theory were applied.The equilibrium lattice constants and the bulk modulus of a number of structures (NaCl, CsCl, ZnS) were calculated as well as the elastic constants for the structures (NaCl, CsCl). The NaCl structure is found to be the most stable one among all the three phases considered. We have found that the GGA predicts the elastic constants in good agreement with experimental data.Both the LDA and GGA were successful in predicting the location of the band gap at the L point of the Brillouin zone but they are inconclusive regarding the value of the band-gap width. To resolve the issue of the gap, we performed Slater-Koster (SK) tight-binding calculations, including the spin-orbit coupling in the SK Hamiltonian. The SK results that are based on our GGA calculations give the best agreement with experiment.Results are reported for the pressure dependence of the energy gap of these compounds in the NaCl structure. The pressure variation of the energy gap indicates a transition to a metallic phase at high pressure. Band structure calculations in the CsCl structure show a metallic state for all compounds. The electronic band structure in the ZnS phase shows an indirect band gap at the W and X point of the Brillouin zone.     

First-principles study of zinc-blende to rocksalt phase transition in BN

The structural, electronic and elastic properties of the cubic boron nitride (BN) compound are investigated by a first-principle pseudopotential method. The calculations show that the structural phase transition from the zinc-blende(ZB) structure to the rocksalt (RS) structure occurs at a transition pressure of 1088 GPa and with a volume reduction of 3.1%. Both the ZB and RS structures of BN have indirect gaps, with energy gaps of 4.80 eV and 2.11 eV, respectively. The positive pressure derivative of the indirect band gap (Γ-X) energy for the the ZB phase and the predicted ultrahigh metallization pressure are attributed to the absence of d occupations in the valence bands. The increase of the shear modulus with increasing pressure implies that the lattice stability becomes higher when BN is compressed.     

Pressure-induced structural phase transition in RbAu

Using the first principle method based on density functional theory, the structural and elastic properties calculations of RbAu have been performed. The results demonstrate that RbAu is stable in the CsCl structure (B2) at ambient pressure, which is in well agreement with the experimental results. And there exists a structural phase transition from CsCl-type structure (B2) to NaTi-type structure (B32) at the transition pressure of approximate 6 GPa. The pressure effects on the elastic properties are discussed and the elastic property calculation indicates elastic instability maybe provide phase transition driving force according to the variations relation of the elastic constant versus pressure.     

First-principles calculations for transition phase and thermodynamic properties of GaAs

The transition phase of GaAs from the zincblende (ZB) structure to the rocksalt (RS) structure is investigated by ab initio plane-wave pseudopotential density functional theory method, and the thermodynamic properties of the ZB and RS structures are obtained through the quasi-harmonic Debye model. It is found that the transition from the ZB structure to the RS structure occurs at the pressure of about 16.3\,GPa, this fact is well consistent with the experimental data and other theoretical results. The dependences of the relative volume V/V₀ on the pressure P, the Debye temperature \Th and specific heat C_V on the pressure P, as well as the specific heat C_V on the temperature T are also obtained successfully.     

Pressure effect on structural,electronic optical and thermodynamic properties of cubic AlxIn1-xP: a first-principles study

ABSTRACT

First-principles total energy calculations have been performed using the full potential linearised augmented plane wave (FP-LAPW) method as implemented in the WIEN2k code based on the density functional theory (DFT) to investigate the Al-doping effects on the structural, electronic and optical properties of Al_xIn_1-xP ternary alloys in the zinc-blende (ZB) phase. Different approximations of exchange-correlations energy were used such as the local density approximation (LDA), the generalised gradient approximation within parameterisation of Perdew–Burke–Ernzerhof (PBE-GGA), and the Wu-Cohen (WC-GGA). In addition, we have calculated the band structures with high accuracy using the Tran-Blaha modified Becke–Johnson (TB-mBJ) approach. The pressure dependence of the electronic and optical properties of binary AlP, InP compounds and their related ternary alloys Al_xIn_1-xP were also investigated under hydrostatic pressure for (P?=?0.0, 5.0,10.0, 15.0, 20.0, 25.0?GPa), where it is found that InP compound change from direct to indirect band gap for P?≥?9.16?GPa. Furthermore, we have calculated the thermodynamic properties of InP and AlP binary compounds as well as the Al_xIn_1-xP solid solutions, where the quasi-harmonic Debye model has been employed to predict the pressure and temperature dependent Gibbs free energy, heat capacity, Debye temperature and entropy.     

SmN晶体的电子结构和高压相变的第一性原理

利用基于密度泛函理论的第一性原理,研究了SmN晶体的电子结构和高压相变. SmN晶体的电子结构具有半金属特征,多数自旋电子显示金属导电性,少数自旋电子显示半导体导电性. 高压相变的结果显示,SmN晶体经历从NaCl型(B1)到CsCl型(B2)结构转变的压致结构相变,相变压力117 GPa. 弹性系数的结果显示,在环境压力下SmN晶体的弹性系数满足玻恩稳定条件,标志着B1相是力学稳定结构. 声子谱结果显示,在环境压力下B1相是热力学稳定结构,与弹性系数的计算结果一致.     

First-principles predictions on transition from tetrahedron to octahedron,electronic structures and elastic properties of InAs

In this work, the pressure induced phase transition of InAs is investigated by density functional theory. The first-order phase transition of InAs from zinc-blende (ZB) to the rocksalt (RS) structure occurs at 4.9 GPa accompanies by a 26% volume collapse. It is found that the nearest In and As atoms bonded as covalent bond, but there is no strong interaction between the nearest In–In or As–As atoms. Crystal space of ZB structure is occupied by tetrahedrons (4 In–As covalent bonds) partly with many interstice, and crystal space of RS is fulfilled by close-packed octahedrons (6 In–As covalent bonds). With increasing pressure, rebuild of covalent bond due to variations of electronic structure causes phase transition from ZB to RS structure. Furthermore, directional changes of covalent bond along [100] and [110] bring evident variation of shear on the {100} and {110} planes.