Acoustic-induced switching of the reflection wavelength in a fiber Bragg grating

Coupling between copropagating core and cladding modes was implemented by acoustic generation of lateral vibration of an etched fiber. When these coupling processes were combined with counterpropagating coupling of a core mode and a cladding mode and the Bragg reflection of a fiber grating, switching of reflection wavelength between the Bragg wavelength and cladding-mode coupling wavelengths was achieved. We report the implementation of such acoustically induced switching behaviors and explain their operation principles. The implemented results can be used for wavelength-division multiplexed add-drop filtering.     

少模光纤布拉格光栅折射率传感的分析与测量

理论分析和模拟计算了少模光纤布拉格光栅基模及高阶模的耦合与传输特性,得到在相同外部折射率变化情况下,少模光纤基模与高阶模耦合对应的布拉格波长变化,比正、反向基模之间耦合对应的布拉格波长变化显著增大.实验上制作了少模光纤布拉格光栅,测量了基模之间以及基模与高阶模之间对应的布拉格波长随外部折射率、温度变化的情况,得到与理论分析相符的结果.而对于温度变化对折射率测量结果干扰的问题,提出了通过计算布拉格波长差来克服温度影响的方法.这些结果为采用布拉格光纤光栅测量外部折射率变化提供了一种新的途径.     

Optical Properties of High Sensitivity Fiber Bragg Grating on Temperature Sensor

In this paper, the spectrum shift properties of the center reflection wavelength detected to be based on the FBG sensor with ambient temperature change. The basic theoretical methods and numerical simulation for the spectral properties of uniform Bragg grating is analyzed by using coupling mode theory which is optical properties of high sensitivity fiber Bragg grating on temperature sensor in accordance with experiment.     

高双折射光子晶体光纤中均匀布拉格光栅的特性

研究了具有高双折射的光子晶体光纤(HB PCF)中均匀布拉格光栅(FBG)的光谱特性。利用紧凑的超格子模型,对光子晶体光纤的传输特性进行分析,研究正向传输和反向传输的模式之间的耦合规律,从而研究写入光子晶体光纤中的均匀布拉格光栅的特性。首先给出具有C6v对称性的零双折射光子晶体光纤中光纤布拉格光栅的布拉格波长λB随光纤结构参量的变化规律;然后分析一种高双折射光子晶体光纤中的光纤布拉格光栅的光谱特性,高双折射使两个不同偏振态的反射峰分开较大;最后分析了一种常用的双模双折射光子晶体光纤中光纤布拉格光栅的光谱特性,LP01模和LPe11模的两个偏振态对应的反射谱都由于高双折射而分开。     

光栅子结构对光纤光栅特性的影响

用传输矩阵法对具有不同参数的λ／４移相结构，多节λ／４移相结构，有效折射率调制结构，耦合系数调制结构和“缝合”误差结构等五种光栅子结构进行了数值模拟计算，模拟结果解释了作者研制的均匀光纤光栅，相移光纤光栅的传输谱，也验证了其他研究小组发表的实验结果，通过对各种结构的系统研究了，提出了一些新的利用光纤光栅的设想。     

A Simple Configuration for Discontinuous Wavelength-tuning Optical Pulse Source

A simple configuration is proposed to perform wavelength switching in actively mode-locked fiber ring lasers, in which a sampled fiber Bragg grating and a tunable optical filter are cascaded in the ring cavity to exactly select the operating wavelength. The switching of four wavelengths with a spacing of 1.6 nm is obtained. The experimental results demonstrate that this technique is reliable and convenient.     

A Simple Configuration for Discontinuous Wavelength-tuning Optical Pulse Source

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｗａｖｅｌｅｎｇｔｈ ｔｕｎａｂｌｅｕｌｔｒａ ｓｈｏｒｔｏｐｔｉｃａｌｐｕｌｓｅｓｏｕｒｃｅｓａｒｅａｔｔｒａｃｔｉｎｇｇｒｅａｔｉｎｔｅｒｅｓｔｆｏｒａｖａｒｉｅｔｙｏｆａｐｐｌｉｃａｔｉｏｎｓ,ｓｕｃｈａｓｏｐｔｉｃａｌｆｉｂｅｒｓｅｎｓｏｒｓ,ｗａｖｅｌｅｎｇｔｈ ｄｉｖｉｓｉｏｎｍｕｌｔｉｐｌｅｘｉｎｇｃｏｍｍｕｎｉｃａｔｉｏｎｓｙｓｔｅｍａｎｄｔｉｍｅ ｒｅｓｏｌｖｅｄｓｐｅｃｔｒｏｓｃｏｐｙ .Ｉｎｇｅｎｅｒａｌ,ｗａｖｅｌｅｎｇｔｈｔｕｎｉｎｇｉｓｒｅａｌｉ…     

Characteristics of Fused Optical Fiber Grating Couplers with Tapered Shapes

Fused optical fiber grating couplers (FGCs), in which Bragg gratings are written in the coupling regions of fused optical fiber couplers with tapered shapes along them are theoretically and experimentally investigated. By coupled mode analysis considering these tapered shapes, the drop efficiencies of the FGCs, which are inherently zero for the normal fiber couplers without grating, are calculated. The grating offset, which is the difference between the centers of grating and the coupler taper, is found to be effective to increase the drop efficiency of the FGC. It is determined that the tapered shapes influence the wavelength dependence of the drop efficiency and tolerate the grating offset precision. Apodizations for the grating of FGC are found to be effective in suppressing side lobes of the drop efficiency. Measurement of the wavelength characteristics of drop efficiency and the temperature characteristics of drop wavelength of the fabricated fused FGC confirm that the lightwave with specific wavelength can be dropped by the FGC and that the temperature dependence of the drop wavelength is similar to that of Bragg wavelength changes of usual fiber Bragg gratings.     

Design of sidetap fiber Bragg grating filters

A comprehensive theoretical treatment is presented for bound-mode to radiation mode coupling loss (transmission loss) and for bound-mode to bound-mode Bragg reflection (back reflection) in a sidetap fiber phase grating. The spectra of the reflection and transmission loss in a tilt angle range useful for fiber sidetap filter design is presented for the first time. Important dependencies between the designed wavelength of operation and parameters of the fiber grating, which give a clear understanding of the process of the fiber mode to radiation mode coupling and back reflection is also discussed. A practical procedure for the design of sidetap gain flattening filter is also presented.     

光纤激光器中激光波长相对于光纤光栅反射中心的偏移

在用光纤布拉格光栅作为反射器的掺镱光纤激光器的输出光谱中发现激光波长相对于光纤光栅反射中心偏移的现象，偏移量相当于光纤光栅反射带宽的一半。通过实验证明偏移现象与光纤光栅的反射特性和热效应无关，并且在不同的温度和不同的光纤光栅反射波长的情况下都得到了同样的结果。采用激光增益线形的有关理论，对这一现象进行了分析，实验结果与理论分析相一致。     

High efficiency grating coupler between silicon-on-insulator waveguides and perfectly vertical optical fibers

A high-efficiency waveguide-to-fiber grating coupler for silicon-on-insulator waveguides was designed. Perfectly vertical fiber coupling is achieved by using an asymmetric grating structure to suppress the second-order Bragg reflection from the grating. The ability to use a perfectly vertical positioned optical fiber simplifies the packaging of the photonic integrated circuit. A coupling efficiency of 80% at a wavelength of 1.55 microm is obtained.     

Numerical Analysis on Transmission Characteristics of a Bragg Grating Assisted Mismatched Fiber Coupler

Based on mode-coupled theory, a Bragg grating assisted mismatched fiber coupler is analyzed theoretically. At the same time, a detailed numerical analysis on transmission characteristics of the coupler is carried out when it considers the arcs of two fibers in the coupling region of the coupler or not, and the optimized design on the Bragg grating assisted mismatched fiber coupler for wavelength-division multiplexing/ demultiplexing is proposed.     

Numerical Analysis on Transmission Characteristics of a Bragg Grating Assisted Mismatched Fiber Coupler

l IntroductionWavelength-division multiplexing (~) technology is an imPOrtant approach tosatisfy substantial increase of telecommunication network capacity. As one Of keytechnologies used in WDM networks, much progress has been made for wavelengthdivision multipl exing/ demul tip lexing technology thes e years. Based on perfect spectrumcharacteristics of fiber Bragg gratingS and fiber coUPlers, many approaches have beenproPOSed for wavelength-division multiplexing/ de multi pl eXing in a…     

基于阵列波导光栅的智能服装人体测温解调系统研究

研究并实现了一种应用于智能服装中人体温度测量的阵列波导光栅解调系统。分析了系统的解调原理,搭建了光纤布拉格光栅解调实验平台,采用了强度法解调出光纤光栅的布拉格波长,完成了光纤光栅传感器串联前后解调的实验。结果表明,系统对光纤布拉格光栅的布拉格波长的解调具有高线性度,波长测量精度可达0.001 nm,光纤布拉格光栅传感器间串扰所造成的解调误差为0.000 5 nm,人体温度的测量误差为±0.16 ℃。该解调系统精度高、串扰低,可适用于智能服装中人体温度的测量。     

73-nm tuning of a double-clad Yb<Superscript>3+</Superscript>-doped fiber laser based on a hybrid array

We report on a wide wavelength tuning in a double-clad ytterbium-doped fiber laser. The laser cavity consists of an array of broadband high-reflection fiber Bragg gratings and a bulk grating as the output coupler and wavelength selection element. The proposed fiber laser configuration combines a low intracavity loss of the fiber Bragg grating mirrors with a wide wavelength tuning of the bulk gratings. We demonstrate a >70-nm wavelength tuning range, limited only by the available fiber Bragg gratings.     

非啁啾取样光纤布拉格光栅反射峰值波长的分析

推导并验证了非啁啾取样光纤布拉格光栅(SFBG)反射谱中反射峰值波长的表达式。基于种子光栅中心波长对应的折射率调制深度和取样光纤布拉格光栅折射率调制函数的傅里叶级数展开式,提炼出取样光纤布拉格光栅的折射率调制深度和各阶光栅周期,从而导出其反射峰值波长的表达式。由于考虑了占空比、取样周期等取样光纤布拉格光栅的结构参量,因而表达式能够描述反射峰的分布。仿真实验中,不同占空比或取样周期下计算出的反射峰值波长、信道间隔符合数值反射谱。该表达式既适用于均匀取样光纤布拉格光栅,也适用于交流切趾和交直流切趾取样光纤布拉格光栅。     

Simultaneous Measurement of Temperature and Refractive Index of Liquid Using Cladding-Etched Double-Core Fiber Bragg Grating

Abstract

This study proposed and demonstrated a fiber Bragg grating sensor for simultaneous detection of the temperature and refractive index of a liquid. The fiber Bragg grating is composed of three index layers: an inner core, an outer core, and a cladding. The cladding was etched for evanescent wave coupling between the outer core mode and an external liquid. The Bragg wavelength of the inner core mode is used for obtaining temperature data, while the refractive index for the liquid was determined by using the difference between the Bragg wavelength of the inner core mode and that of outer core mode.     

Tunable chirped fiber Bragg grating based on the D-shaped fiber

A novel tunable chirped fiber Bragg grating is realized by bending a piece of D-shaped fiber Bragg grating into a specific shape like the character ‘Ω’. The principle of tuning is demonstrated by numerical simulation. The dispersion of the grating can be tuned while the center wavelength is kept nearly no shift. The experimental results match well with the numerical analysis. The influence from D-shaped fiber’s birefringence and polarization dependent loss is discussed theoretically and experimentally as well. This proposed tuning technique has potential applications in the optical communications and other fiber optics systems.     

Experimental Investigations of a Stress-Gradient Sampled Bragg Grating with a Chirp in the Sampling Period

The spectrum response of a sampled Bragg grating (SBG) with a chirp in the sampling period (CSP) under stress-gradient is experimentally investigated for the first time. It is shown that unlike in a conventional SBG without CSP, the bandwidths of the multiple stopbands vary with the stress asymmetrically around the center Bragg wavelength. These results coincide with the theoretical predictions presented by us. The present experimental demonstration is useful for the application of the SBG with CSP in dispersion slope compensation of fiber in dense wavelength division multiplexing (DWDM) systems.     

半导体激光器与光纤光栅对接耦合研究

半导体激光器管芯与光纤光栅的对接耦合对光纤光栅外腔激光器的特性起到关键作用。利用散射矩阵分析了激光器管芯与光纤光栅外腔的对接耦合，发现对接的距离以及对接的耦合效率决定了光纤光栅外腔激光器的性能。在强反馈情况下,激射波长在光纤光栅外腔有效反射率决定的布喇格波长内随对接耦合距离周期性的变化,对弱反馈情况则有些不同。同时对比了两种情况的边模抑制比。该分析为实际制作器件提供了指导。