Rheological study and thermodynamic analysis of the binary system (water/ethanol): Influence of concentration

Water is the most widely used solvent in the chemical and pharmaceutical industry, since it is the most physiological and best tolerated excipient. However, in some cases water cannot be used as a solvent because the active substance or solute is insoluble or only slightly soluble in water. For this and other reasons, nonwater solvents may be used possessing the common characteristic of being soluble or mixable in water; as a result, such solvents can be used to prepare binary or tertiary mixtures, etc., with different purposes such as increasing water solubility, or modifying the viscosity or absorption of the dissolved substance, for example.

Ethanol, along with other alcohols either alone or in water–alcohol solutions involving different proportions, are widely used in the pharmaceutical industry as excipients in different formulations, or as solvents.

Ethanol–water systems are characterized by the so-called volume contraction phenomenon, which is in turn accompanied by a considerable increase in the viscosity of the system. This is attributed to the increase in size of the molecular package secondary to solvation or the formation of hydrogen bonds between the alcohol and water – a phenomenon referred to as viscous synergy.

The formation of hydrogen bonds between alcohol and water modifies with temperature, thus leading to variations in the viscosity of the system.

The present study investigates the viscous synergy of systems comprising pure alcohol in water at different concentrations, determining the proportion of alcohol–water at which maximum viscous synergy occurs, along with the correlation between the viscosity increments and density. The ratio between the maximum viscosity reached by the mixture and the viscosity of pure alcohol is expressed by the enhancement index defined as: E _η ?=?η_max/η _o . Likewise, and since the viscosity of these systems varies with temperature, a thermodynamic study has been made to determine the activation energy of the ethanol–water mixture as a function of concentration.     

Comparison of magnesium sulfate and sodium sulfate for removal of water from pesticide extracts of foods

Water-miscible solvents, such as acetone and acetonitrile, effectively extract both polar and nonpolar pesticide residues from nonfatty foods. The addition of sodium chloride to the resulting acetonitrile-water or acetone-water extract (salting out) results in the separation of the water from the organic solvent. However, the organic solvent layer (pesticide extract) still contains some residual water, which can adversely affect separation procedures that follow, such as solid-phase extraction and/or gas chromatography. Drying agents, such as sodium sulfate or magnesium sulfate, are used to remove the water from the organic extracts. In the present study, we used nuclear magnetic resonance spectroscopy to study the composition of the phases resulting from salting out and to compare the effectiveness of sodium sulfate and magnesium sulfate as drying agents. The study showed that considerable amounts of water remained in the organic phase after phase separation. Sodium sulfate was a relatively ineffective drying agent, removing little or no residual water from the organic solvent. Magnesium sulfate proved to be a much more effective drying agent.     

Determination of the Structure and Effective Dielectric Constant of Hydrated Ions

Abstract

Debye's equation for the salting in or out of nonpolar compounds, such as benzene, in aqueous salt solutions was expanded so as to determine the effective dielectric decrement and constant of the hydrated domain of an ion. For ions having an electrostatic charge per surface area less than or equal to that of the K⁺ or Cl^? ions, this domain consists of a single layer of water molecules loosely or negatively hydrated to the ion; i.e., the domain consists of a mono-molecular B region. For ions having an electrostatic charge per unit surface area approximately equal to that of the Na⁺ and F^? ions, there exists no B region and only one layer of tightly bound or positively hydrated water (a monomolecular A region). Since the electrostatic field does not appreciably influence water molecules beyond this A region, such ions have an effective dielectric constant that is near zero, as in relatively inert molecules such as hydrocarbons. For all other ions, such as H⁺, Li⁺, Mg²⁺⁰,Cr²⁺, Sr²⁺, Ba²⁺, and other multivalent ions, there exists only one monomolecular A region followed by one monomolecular B region. The effective value of the dielectric constant of such an ion is obtained from its B region, since its A region cannot be penetrated. The effective dielectric decrement or constant of any B region as measured by benzene solubility goes through a maximum as the electrostatic charge per unit surface area (C/A) is decreased because a large C/A restricts the orientation of the hydrated water molecules and a low value of C/A allows competitive interaction between surrounding water molecules. Thus both small and large values of C/A decrease the solubility of benzene, i.e., decrease i t s ability to penetrate into the medium. A decrease in the macroscopic dielectric constant of water upon the addition of salt is due to the destruction of the clusters of water by the ions, or to the addition of ions which have effective dielectric constants less than that of water, or both. All hydrated ions o r molecules which salt-in or salt -out benzene have, respectfully, effective dielectric constants greater or less than that of water.     

Stability and recovery of triazine and chloroacetamide herbicides from pH adjusted water samples by using empore solid-phase extraction disks and gas chromatography with ion trap mass spectrometry

Empore disks were used to successfully extract herbicide residues from a difficult-to-analyze surface water source and deionized water. Herbicide recoveries were lower in surface water at 7,14, or 21 days after fortification and storage at 4 degrees C, presumably due to chemical sorption onto precipitated organic particulates. The addition of acid to the samples, as recommended in EPA Method 525.2, did not affect recoveries of alachlor and metolachlor, but reduced recoveries of atrazine, simazine, and cyanazine. Treatment of water samples with sodium hypochlorite did not affect alachlor or metolachlor recoveries, but greatly reduced the recovery of all triazine herbicides. This indicates that addition of acid or sodium hypochlorite to water samples may be detrimental to triazine analysis.     

Deuterium and oxygen-18 determination of microliter quantities of a water sample using an automated equilibrator

We describe a modified version of the equilibration method and a correction algorithm for isotope ratio measurements of small quantities of water samples. The deltaD and the delta(18)O of the same water sample can both be analyzed using an automated equilibrator with sample sizes as small as 50 microL. Conventional equilibration techniques generally require water samples of several microL. That limitation is attributable mainly to changes in the isotope ratio ((18)O/(16)O or D/H) of water samples during isotopic exchange between the equilibration gas (CO(2) or H(2)) and water, and therefore the technique for microL quantities of water requires mass-balance correction using the water/gas (CO(2) or H(2)) mole ratio to correct this isotopic effect. We quantitatively evaluate factors controlling the variability of the isotopic effect due to sample size. Theoretical consideration shows that a simple linear equation corrects for the effects without determining parameters such as isotope fractionation factors and water/gas mole ratios. Precisions (1-sigma) of 50-microL meteoric water samples whose isotopic compositions of -1.4 to -396.2 per thousand for deltaD are +/-0.5 to +/-0.6 per thousand, and of -0.37 to -51.37 per thousand for delta(18)O are +/-0.01 to +/-0.11 per thousand.     

Screening and identification of unknown contaminants in water with liquid chromatography and quadrupole-orthogonal acceleration-time-of-flight tandem mass spectrometry

In order to assess and maintain the quality of surface waters, target compound monitoring is often not sufficient. Many unknown micro-contaminants are present in water, originating in municipal, industrial or agricultural effluents. Some of these might pose a risk to drinking water production and consequently to human health. The possibilities of screening surface water and identification of these non-target water pollutants with modern data acquisition possibilities of hybrid quadrupole-orthogonal acceleration time of flight mass spectrometers (Q-TOF), such as data-dependent MS to MS/MS switching were investigated. Using model compounds, a procedure for the liquid chromatography-tandem mass spectrometry (LC-MS/MS) screening of water extracts was developed, enabling the detection and identification of compounds at levels < or = 0.25 microg/l in surface water. Based on the accurate mass the elemental compositions for the precursor and product ions are calculated. The calculated chemical formulae are searched against the Merck index, the NIST library, an own database containing about 2,500 water pollutants (pesticides and other contaminants) as well as a CI-CID library containing tandem MS spectra of about 100 water contaminants. The developed approach was applied for the identification of unknown compounds, present in native surface water extract. For three of these compounds, structures were proposed. Confirmation of the proposed structures with standards was beyond the scope of this study.     

Nonstationary evolution of the size,composition, and temperature of microdroplets of nonideal two- and three-component aqueous solutions

Results of numerical solution have been presented for a set of equations describing the nonstationary and nonisothermal growth or evaporation of microdroplets consisting of ethanol and water, sulfuric acid and water, and sulfuric and nitric acids and water. Time dependences of droplet size, temperature, and composition have been determined at low concentrations of a condensable vapor, as compared with the concentration of a carrier gas in an ambient vapor–gas mixture. The calculations have been performed using different initial conditions and approximations for the dependences of saturation vapor pressures, activity coefficients, and partial heats of condensation of the components, as well as average volumes per molecule on droplet composition and temperature. By the examples of ethanol–water and sulfuric acid–water droplets, it has been shown that nonmonotonic variations in the droplet radius are possible. Regimes of nonmonotonic variations in the temperature of a droplet that precede the onset of its stationary growth or evaporation have been revealed for all systems under consideration.     

Superhydrophilic and superwetting surfaces: definition and mechanisms of control

The term superhydrophobicity was introduced in 1996 to describe water-repellent fractal surfaces, made of a hydrophobic material, on which water drops remain as almost perfect spheres and roll off such surfaces leaving no residue. Today, superhydrophobic surfaces are defined as textured materials (and coatings) on (nonsmooth) surfaces on which water forms contact angles 150° and larger, with only a few degrees of contact angle hysteresis (or sliding angle). The terms superhydrophilicity and superwetting were introduced a few years after the term superhydrophobicity to describe the complete spreading of water or liquid on substrates. The definition of superhydrophilic and superwetting substrates has not been clarified yet, and unrestricted use of these terms sometimes stirs controversy. This Letter briefly reviews the superwetting phenomenon and offers a suggestion on defining superhydrophilic and superwetting substrates and surfaces.     

Hot water-promoted ring-opening of epoxides and aziridines by water and other nucleopliles

Effective hydrolysis of epoxides and aziridines was conducted by heating them in water at 60 or 100 degrees C. Other types of nucleophile such as amines, sodium azide, and thiophenol could also efficiently open epoxides and aziridines in hot water. It was proposed that hot water acted as a modest acid catalyst, reactant, and solvent in the hydrolysis reactions.     

The structure and dynamics of hydrated and hydroxylated magnesium oxide nanoparticles

An understanding of the structure of water on metal oxide nanoparticles is important due to its involvement in a number of surface processes, such as in the modification of transport near surfaces and the resulting impact on crystal growth and dissolution. However, as direct experimental measurements probing the metal oxide-water interface of nanoparticles are not easily performed, we use atomistic simulations using experimentally derived potential parameters to determine the structure and dynamics of the interface between magnesium oxide nanoparticles and water. We use a simple strategy to generate mineral nanoparticles, which can be applied to any shape, size, or composition. Molecular dynamics simulations were then used to examine the structure of water around the nanoparticles, and highly ordered layers of water were found at the interface. The structure of water is strongly influenced by the crystal structure and morphology of the mineral and the extent of hydroxylation of the surface. Comparison of the structure and dynamics of water around the nanoparticles with their two-dimensional flat surface counterparts revealed that the size, shape, and surface composition also affects properties such as water residence times and coordination number.     

Condensation and freezing of droplets on superhydrophobic surfaces

Superhydrophobic coatings are reported as promising candidates for anti-icing applications. Various studies have shown that as well as having ultra water repellency the surfaces have reduced ice adhesion and can delay water freezing. However, the structure or texture (roughness) of the superhydrophobic surface is subject to degradation during the thermocycling or wetting process. This degradation can impair the superhydrophobicity and the icephobicity of those coatings. In this review, a brief overview of the process of droplet freezing on superhydrophobic coatings is presented with respect to their potential in anti-icing applications. To support this discussion, new data is presented about the condensation of water onto physically decorated substrates, and the associated freezing process which impacts on the freezing of macroscopic droplets on the surface.     

Quantum chemical studies of the chemisorption of water and of unhydrated and hydrated halide ions on mercury

Local structures on electrode interfaces can be explored by quantum chemical investigation of medium-sized systems consisting of a cluster of substrate (metal) atoms, one or several solvent molecules, and/or at least one ion to be adsorbed at the interface. For the study of water adsorption and halide ion adsorption (unhydrated as well as hydrated) on a mercury surface, we have used the standard CNDO method together with geometrical optimization of the atom positions.In this paper, the following topics have been treated: (a) adsorption of a single water molecule in different positions on a close-packed plane cluster of seven mercury atoms; (b) adsorption of unhydrated halide ions (Cl^?, Br^?, I^?) in the “on-top” or hollow position on the mercury surface; (c) adsorption of monohydrated halides on the mercury surface. Further studies including solvation by six water molecules are discussed.The calculations provide information about minimum-energy geometries, energetic data, and local charges. Furthermore, they allow some conclusions about water mobility and reorientation on a close-packed metal surface, water orientation under the combined influence of an adsorbed ion and the metal surface, and trends of charge distribution in the halide series to be drawn. Calculations are critically discussed in the light of experimental and other quantum chemical data.     

Dynamics and state of lipid bilayer-internal water unraveled with solution state 1H dynamic nuclear polarization

The dynamics and state of lipid bilayer-internal hydration water of unilamellar lipid vesicles dispersed in solutions is characterized. This study was enabled by a recently developed technique based on Overhauser dynamic nuclear polarization (DNP)-driven amplification of (1)H nuclear magnetic resonance (NMR) signal of hydration water. This technique can, in the full presence of bulk water, selectively quantify the translational dynamics of hydration water within ～10 ? around spin labels that are specifically introduced to the local volume of interest within the lipid bilayer. With this approach, the local apparent diffusion coefficients of internal water at different depths of the lipid bilayer were determined. The modulation of these values as a response to external stimuli, such as the addition of sodium chloride or ethanol and the lipid phase transitions, that alter the fluctuations of bilayer interfaces together with the activation energy values of water diffusivity shows that water is not individually and homogeneously solvating lipid's hydrocarbon tails in the lipid bilayer. We provide experimental evidence that instead, water and the lipid membrane comprise a heterogeneous system whose constituents include transient hydrophobic water pores or water structures traversing the lipid bilayer. We show how these transient pore structures, as key vehicles for passive water transport can better reconcile our experimental data with existing literature data on lipid bilayer hydration and dynamics.     

Characterization of the non-stoichiometric and isomorphic hydration and solvation in FK041 clathrate

FK041 crystallizes as a non-stoichiometric hydrate or as solvated hydrates which were characterized as isomorphic clathrates by powder X-ray diffractometry. Moisture and organic solvent vapor sorption studies, differential scanning calorimetry and thermogravimetric analysis revealed that FK041 monohydrate forms a physically stable host crystal, which has lattice channels for guest water and/or organic solvent molecules. The hydration state varies non-stoichiometrically between dihydrate and tetrahydrate depending on the relative humidity and the mol content of the co-existing organic solvent, that is 2-propanol, ethanol, or acetone. These organic solvents are thought to replace a part of originally present water with a mol ratio of 1:3. 2-Propanol exhibited the most stable solvation, indicating that the size and shape of 2-propanol are the most preferable to the lattice channels.     

Effects of thermodynamic ensembles and mineral surfaces on interfacial water structure

While performing molecular dynamics simulations of water or aqueous solutions in a slab geometry, such as at mineral surfaces, it is important to match bulk water density in the diffuse region of the model system with that expected for the appropriate experimental conditions. Typically, a slab geometry represents parallel surfaces with a variable region of confined water (this region can range in size from a few ?ngstroms to many tens of ?ngstroms). While constant-pressure simulations usually result in appropriate density values in the bulk diffuse region removed from either surface, constant-volume simulations have also been widely used, sometimes without careful consideration of the method for determining water content. Simulations using two thermodynamic ensembles as well as two methods for calculating the water-accessible volume have been investigated for two distinct silicate surfaces-hydrophilic cristobalite (111) and hydrophobic pyrophyllite (001). In cases where NPT simulations are not feasible, a simple geometry-based treatment of the accessible volume can be sufficient to replicate bulk water density far from the surface. However, the use of the Connolly method can be more appropriate in cases where a surface is less well-defined. Specific water-surface interactions (e.g., hydrophobic repulsion) also play a role in determining water content in a confined water simulation. While reported here for planar surfaces, these results can be extended to an interface with any solvent, or to other types of surfaces and geometries.     

Structure at the Free Surface of Water and Aqueous Electrolyte Solutions

Abstract

During the past 20 years or so one of the regions of conspicuous growth in the field of physical chemistry has been the study of the structure and behaviour of water and aqueous solutions. There are practical reasons, for example technical and biological, for this interest, but it is also true that the complexity of water as a liquid provides its own motive to the rcsearch worker. It is unlikely that we would spend so much time in the study of water if it were as simple a liquid as Argon. However, strange though the behaviour of liquid water is, it is probably not as strange as it has sometimes been thought to be. The thermal “anomalies” of water and the abnormal “Poly-water” Seem rather likely to fade out of the scientific scene, as have other stimulating but nonviable scientific myths.     

Development and applications of the interfacial tension between water and organic or biological surfaces

The interfacial tension (gamma(SW)) between a condensed-phase material (S) and water (W) is one of the most important terms occurring (directly or indirectly) in the major surface thermodynamic combining rules, such as the different variants of the Dupré equation, as well as the Young and the Young-Dupré equations. Since the late 1950s, gamma(SL) (where L stands for liquid in general) could be correctly expressed, as long as one only took van der Waals attractions and electrical double layer repulsions into account, i.e., as long as both S and L were apolar. However for interfacial interactions taking place in water among apolar as well as polar solutes, particles or surfaces, gamma(SW) was not properly worked out until the late 1980s, due in particular to uncertainties about the treatment of the polar properties of liquid water and other condensed-phase materials. In this review the historical development of the understanding of these polar properties is outlined and the polar equation for gamma(SW), as well as the equations derived there from for the free energies of interaction between apolar or polar entities, immersed in water (deltaG(SWS)) are discussed. Also discussed is the role of the various terms of deltaG(SWS), in hydrophobic attraction (the "hydrophobic effect"), hydrophilic repulsion ("hydration forces") and in the quantitative expression of hydrophobicity and hydrophilicity. The DLVO theory of attractive and repulsive free energies between particles immersed in liquids, as a function of distance between suspended particles, was extended to allow its use in the expression of the polar interactions occurring in water. Finally, the free energy term, deltaG(SWS) and the related gamma(SW), have been directly linked to the aqueous solubility of organic and biological solutes, which allows the determination of interfacial tensions between such solutes and water from their solubilities.     

葡萄糖水溶液氢键结构和动力分析

利用分子动力学模拟方法研究了不同浓度下葡萄糖水溶液的氢键结构和氢键生存周期. 分析了参与i个氢键(分子内、分子间、所有类型)的葡萄糖分子和水分子的百分比分布. 研究发现存在一个特征数N, 参与N个氢键的分子的比例最高, 当iN时, 参与i个氢键的分子的比例随着浓度的增加而减小. 还分析了不同类型氢键(葡萄糖分子内、葡萄糖分子间、水分子间、葡萄糖分子与水分子间、所有类型)的连续和截断自相关函数, 并计算了对应的氢键生存周期.     

Dynamic nuclear polarization enhanced nuclear magnetic resonance and electron spin resonance studies of hydration and local water dynamics in micelle and vesicle assemblies

We present a unique analysis tool for the selective detection of local water inside soft molecular assemblies (hydrophobic cores, vesicular bilayers, and micellar structures) suspended in bulk water. Through the use of dynamic nuclear polarization (DNP), the (1)H NMR signal of water is amplified, as it interacts with stable radicals that possess approximately 658 times higher spin polarization. We utilized stable nitroxide radicals covalently attached along the hydrophobic tail of stearic acid molecules that incorporate themselves into surfactant-based micelle or vesicle structures. Here, we present a study of local water content and fluid viscosity inside oleate micelles and vesicles and Triton X-100 micelles to serve as model systems for soft molecular assemblies. This approach is unique because the amplification of the NMR signal is performed in bulk solution and under ambient conditions with site-specific spin labels that only detect the water that is directly interacting with the localized spin labels. Continuous wave (cw) electron spin resonance (ESR) analysis provides rotational dynamics of the spin-labeled molecular chain segments and local polarity parameters that can be related to hydration properties, whereas we show that DNP-enhanced (1)H NMR analysis of fluid samples directly provides translational water dynamics and permeability of the local environment probed by the spin label. Our technique therefore has the potential to become a powerful analysis tool, complementary to cw ESR, to study hydration characteristics of surfactant assemblies, lipid bilayers, or protein aggregates, where water dynamics is a key parameter of their structure and function. In this study, we find that there is significant penetration of water inside the oleate micelles with a higher average local water viscosity ( approximately 1.8 cP) than in bulk water, and Triton X-100 micelles and oleate vesicle bilayers mostly exclude water while allowing for considerable surfactant chain motion and measurable water permeation through the soft structure.