Water molecule adsorption on short alanine peptides: how short is the shortest gas-phase alanine-based helix?

Water adsorption measurements have been performed under equilibrium conditions for unsolvated Ac-A(n)K+H(+) and Ac-KA(n)+H(+) peptides with n = 4 - 10. Previous work on larger alanine peptides has shown that two dominant conformations (helices and globules) are present for these peptides and that water adsorbs much more strongly to the globules than to the helices. All the Ac-KA(n)+H(+) peptides studied here (which are expected to be globular) adsorb water strongly, and so do the Ac-A(n)K+H(+) peptides with n < 8. However, for Ac-A(n)K+H(+) with n = 8-10 there is a substantial drop in the propensity to adsorb water. This result suggests that Ac-A(8)K+H(+) is the smallest Ac-A(n)K+H(+) peptide to have a significant helical content in the gas phase. Water adsorption measurements for Ac-V(n)K+H(+) and Ac-L(n)K+H(+) with n = 5-10 suggest that the helix emerges at n = 8 for these peptides as well.     

The energy landscape of unsolvated peptides: helix formation and cold denaturation in Ac-A4G7A4 + H+

Ion mobility measurements and molecular dynamics simulations were performed for unsolvated A4G7A4 + H+ and Ac-A4G7A4 + H+ (Ac = acetyl, A = alanine, G = glycine) peptides. As expected, A4G7A4 + H+ adopts a globular conformation (a compact, random-looking, three-dimensional structure) over the entire temperature range examined (100-410 K). Ac-A4G7A4 + H+ on the other hand is designed to have a flat energy landscape with a marginally stable helical state. This peptide shows at least four different conformations at low temperatures (<230 K). The two conformations with the largest cross sections are attributed to - and partial -helices, while the one with the smallest cross section is globular. The other main conformation may be partially helical. Ac-A4G7A4 + H+ becomes predominantly globular at intermediate temperatures and then becomes more helical as the temperature is raised further. This unexpected behavior may be due to the helix having a higher vibrational entropy than the globular state, as predicted by some recent calculations (Ma, B.; Tsai, C.-J.; Nussinov, R. Biophys. J. 2000, 79, 2739-2753).     

Helix unfolding in unsolvated peptides

The conformations of unsolvated Ac-K(AGG)(5)+H(+) and Ac-(AGG)(5)K+H(+) peptides (Ac = acetyl, A = alanine, G = glycine, and K = lysine) have been examined by ion mobility measurements over a wide temperature range (150-410 K). The Ac-K(AGG)(5)+H(+) peptide remains a globule (a compact, roughly spherical structure) over the entire temperature range, while both an alpha-helix and a globule are found for Ac-(AGG)(5)K+H(+) at low temperature. As the temperature is raised the alpha-helix unfolds. Rate constants for loss of the helix (on a millisecond time scale) have been determined as a function of temperature and yield an Arrhenius activation energy and preexponential factor of 38.2 +/- 1.0 kJ mol(-1) and 6.5 +/- 3.7 x 10(9) s(-1), respectively. The alpha-helix apparently does not unfold directly into the globule, but first converts into a long-lived intermediate which survives to a significantly higher temperature before converting. According to molecular dynamics simulations, there is a partially untwisted helical conformation that has both a low energy and a well-defined geometry. This special structure lies between the helix and globule and may be the long-lived intermediate.     

Extreme stability of an unsolvated alpha-helix

High-temperature ion mobility measurements have been performed for alpha-helical Ac-A15K+H+ and globular Ac-KA15+H+ peptides. The alpha-helical and globular conformations do not melt into random coils as the temperature is raised. Instead, both conformations survive to the point where the peptide signals vanishes due to fragmentation. This occurs at 600 K for the globular Ac-KA15+H+ peptide and at 725 K for the alpha-helical Ac-A15K+H+. For the helical Ac-A15K+H+ peptide it appears that fragmentation is triggered by disruption of the helical conformation.     

Mechanisms of the reactions of W AND W+ with H2O: computational studies

The mechanism of the reactions of W and W(+) with the water molecule have been studied for several lower-lying electronic states of tungsten centers at the CCSD(T)/6-311G(d,p)+SDD and B3LYP/6-31G(d,p)+SDD levels of theory. It is shown that these reactions are essentially multistate processes, during which lower-lying electronic states of the systems cross several times. They start with the formation of initial prereaction M(H(2)O) complexes with M-H(2)O bonding energies of 9.6 and 48.2 kcal/mol for M = W and W(+), followed by insertion of the metal center into an O-H bond with 20.0 and 53.3 kcal/mol barriers for neutral and cationic systems, respectively. The overall process of M + H(2)O --> t-HM(OH) is calculated to be highly exothermic, 48.4 and 48.8 kcal/mol for M = W and W(+). From the HM(OH) intermediate the reaction may proceed via several different channels, among which the stepwise HM(OH) --> HMO + H --> (H)(2)MO and concerted HM(OH) --> (H)(2)MO pathways are more favorable and can compete (energetically) with each other. For the neutral system (M = W), the concerted process is the most favorable, whereas for the charged system (M = W(+)), the stepwise pathway is slightly more favorable. From the energetically most favorable intermediate (H)(2)MO the reactions proceed via H(2)-molecule formation with a 53.1 kcal/mol activation barrier for the neutral system. For the cationic system, H-H formation and dissociation is an almost barrierless process. The overall reaction of W and W(+) with the water molecule leading to H(2) + MO formation is found to be exothermic by 48.2 and 39.8 kcal/mol, respectively. In the gas phase with the collision-less conditions the reactions W((7)S) + H(2)O --> H(2) + WO((3)Sigma(+)), and W(+)((6)D) + H(2)O --> H(2) + WO(+)((4)Sigma(+)) are expected to proceed via a 10.4 and 5.1 kcal/mol overall energy barrier corresponding to the first O-H dissociation at the TS1. On the basis of these PESs, we predict kinetic rate constants for the reactions of W and W(+) with H(2)O.     

A new mechanism for the production of highly vibrationally excited OH in the mesosphere: an ab initio study of the reactions of O2(A 3Sigmau+ and A' 3Deltau)+H

In an attempt to explain the observed nightglow emission from OH(v=10) in the mesosphere that has the energy greater than the exothermicity of the H+O(3) reaction, potential energy surfaces were calculated for reactions of high lying electronic states of O(2)(A (3)Sigma(u) (+) and A' (3)Delta(u)) with atomic hydrogen H((2)S) to produce the ground state products OH((2)Pi)+O((3)P). From collinear two-dimensional scans, several adiabatic and nonadiabatic pathways have been identified. Multiconfigurational single and double excitation configuration interaction calculations show that the adiabatic pathways on a (4)Delta potential surface from O(2)(A' (3)Delta)+H and a (4)Sigma(+) potential surface from O(2)(A (3)Sigma(u) (+))+H are the most favorable, with the zero-point corrected barrier heights of as low as 0.191 and 0.182 eV, respectively, and the reactions are fast. The transition states for these pathways are collinear and early, and the reaction coordinate suggests that the potential energy release of ca. 3.8 eV (larger than the energy required to excite OH to v=10) is likely to favor high vibrational excitation.     

Helix-turn-helix motifs in unsolvated peptides

The conformations of unsolvated Ac-A14KG3A14K + 2H+ (Ac = acetyl, A = alanine, K = lysine, G = glycine) have been examined by ion mobility measurements and molecular dynamics simulations. This peptide was designed as a model helix-turn-helix motif. It was found to adopt three distinct geometries which were assigned to an extended helical conformation which is only stable at low temperatures (<230 K), a relatively high energy but metastable structure with exchanged lysines, and a coiled-coil. The coiled coil (which consists of an antiparallel arrangement of two helical alanine sections linked by a flexible glycine loop) is the dominant conformation. For temperatures >350 K, the experimental results indicate the helices uncouple and the loop randomizes. From equilibrium constants determined for this helix coupling right arrow over left arrow uncoupling transition, we found DeltaH degrees = -45 kJ mol-1 and DeltaS degrees = 114 J K-1 mol-1. -DeltaH degrees is essentially the enthalpy change for docking the two helices together while DeltaS degrees is essentially the entropy change for freeing up the glycine loop.     

Peptide pinwheels

Electrospraying a mixture of Ac-(GA)7K and Ac-A(GA)7K (Ac = acetyl, G = glycine, A = alanine, and K = lysine) peptides produces strong signals for unsolvated dimers and trimers. The conformations of these multimers have been examined with use of ion mobility measurements in conjunction with molecular dynamics simulations. The results suggest that the trimers adopt a pinwheel arrangement of helices with the C-termini tethered together by the protonated lysine side chain from one peptide interacting with the C-terminus of a neighboring helix. This arrangement leads to a cooperative electrostatic stabilization of all the helices through the interaction of the combined charge with the helix dipoles. The dimer adopts a related V-shaped arrangement of helices which is also cooperatively stabilized.     

A kinetic study of the reactions of Fe+ with N2O, N2, O2, CO2 and H2O, and the ligand-switching reactions Fe+.X + Y --> Fe+.Y + X (X = N2, O2, CO2; Y = O2, H2O)

A series of reactions involving Fe(+) ions were studied by the pulsed laser ablation of an iron target, with detection of ions by quadrupole mass spectrometry at the downstream end of a fast flow tube. The reactions of Fe(+) with N(2)O, N(2) and O(2) were studied in order to benchmark this new technique. Extending measurements of the rate coefficient for Fe(+) + N(2)O from 773 K to 185 K shows that the reaction exhibits marked non-Arrhenius behaviour, which appears to be explained by excitation of the N(2)O bending vibrational modes. The recombination of Fe(+) with CO(2) and H(2)O in He was then studied over a range of pressure and temperature. The data were fitted by RRKM theory combined with ab initio quantum calculations on Fe(+).CO(2) and Fe(+).H(2)O, yielding the following results (120-400 K and 0-10(3) Torr). For Fe(+) + CO(2): k(rec,0) = 1.0 x 10(-29) (T/300 K)(-2.31) cm(6) molecule(-2) s(-1); k(rec,infinity) = 8.1 x 10(-10) cm(3) molecule(-1) s(-1). For Fe(+) + H(2)O: k(rec,0) = 5.3 x 10(-29) (T/300 K)(-2.02) cm(6) molecule(-2) s(-1); k(rec,infinity) = 2.1 x 10(-9) (T/300 K)(-0.41) cm(3) molecule(-1) s(-1). The uncertainty in these rate coefficients is determined using a Monte Carlo procedure. A series of exothermic ligand-switching reactions were also studied at 294 K: k(Fe(+).N(2) + O(2)) = (3.17 +/- 0.41) x 10(-10), k(Fe(+).CO(2) + O(2)) = (2.16 +/- 0.35) x 10(-10), k(Fe(+).N(2) + H(2)O) = (1.25 +/- 0.14) x 10(-9) and k(Fe(+).O(2) + H(2)O) = (8.79 +/- 1.30) x 10(-10) cm(3) molecule(-1) s(-1), which are all between 36 and 52% of their theoretical upper limits calculated from long-range capture theory. Finally, the role of these reactions in the chemistry of meteor-ablated iron in the upper atmosphere is discussed. The removal rates of Fe(+) by N(2), O(2), CO(2) and H(2)O at 90 km altitude are approximately 0.1, 0.07, 3 x 10(-4) and 1 x 10(-6) s(-1), respectively. The initially formed Fe(+).N(2) and Fe(+).O(2) are converted into the H(2)O complex at approximately 0.05 s(-1). Fe(+).H(2)O should therefore be the most abundant single-ligand Fe(+) complex in the mesosphere below 90 km.     

Novel synthesis and oxidizing ability of tropylium ions annulated with two 2,4-dimethylfuro[2,3-d]pyrimidine-1(2H),3(4H)-diones

Convenient preparation of novel tropylium ions annulated with two 2,4-dimethylfuro[2,3-d]pyrimidine-1(2H),3(4H)-diones, 12a(+).BF(4)(-) and 12b(+)().BF(4)(-), consists of a reaction of 2-methoxytropone with dimethylbarbituric acid to give 7,9-dimethyl-3-[1',3'-dimethyl-2'(1'H),4'(3'H),6'(5'H)-trioxopyrimidin-5'-ylidene]cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dione 8 and the following oxidative cyclization by using DDQ or photoirradiation under aerobic conditions. On the basis of the MO calculations, the selectivity of two types of oxidative cyclization reactions of 8 was rationalized. X-ray crystal analyses and MO calculations were carried out to clarify the structural characteristics of 12a(+). BF(4)(-) and 12b(+).BF(4)(-). The stability of cations 12a(+) and 12b(+) is expressed by the pK(R) + values which were determined spectrophotometrically as 8.8 and 8.6. The electrochemical reduction of 12a(+) and 12b(+) exhibited reduction potential at -0.63 and -0.62 (V vs Ag/AgNO(3)), respectively. Reactions of 12a(+)().BF(4)(-) and 12b(+)().BF(4)(-) with some nucleophiles, hydride and diethylamine, were carried out to clarify that the reactivity of 12a(+)().BF(4)(-) and 12b(+).BF(4)(-) was substantially dependent on the annulating position. The oxidizing ability of 12a(+).BF(4)(-) and 12b(+).BF(4)(-) toward alcohols and amines in the autorecycling process was demonstrated as well.     

Guided-ion beam and theoretical study of the potential energy surface for activation of methane by W+

A guided-ion beam tandem mass spectrometer is used to study the reactions, W(+) + CH(4) (CD(4)) and [W,C,2H](+) + H(2) (D(2)), to probe the [W,C,4H](+) potential energy surface. The reaction W(+) + CH(4) produces [W,C,2H](+) in the only low-energy process. The analogous reaction in the CD(4) system exhibits a cross section with strong differences at the lowest energies caused by zero-point energy differences, demonstrating that this reaction is slightly exothermic for CH(4) and slightly endothermic for CD(4). The [W,C,2H](+) product ion reacts further at thermal energies with CH(4) to produce W(CH(2))(x)(+) (x = 2-4). At higher energies, the W(+) + CH(4) reaction forms WH(+) as the dominant ionic product with smaller amounts of WCH(3)(+), WCH(+), and WC(+) also formed. The energy dependent cross sections for endothermic formation of the various products are analyzed and allow the determination of D(0)(W(+)-CH(3)) approximately 2.31 +/- 0.10 eV, D(0)(W(+)-CH(2)) = 4.74 +/- 0.03 eV, D(0)(W(+)-CH) = 6.01 +/- 0.28 eV, and D(0)(W(+)-C) = 4.96 +/- 0.22 eV. We also examine the reverse reaction, [W,C,2H](+) + H(2) (D(2)) --> W(+) + CH(4) (CH(2)D(2)). Combining the cross sections for the forward and reverse processes yields an equilibrium constant from which D(0)(W(+)-CH(2)) = 4.72 +/- 0.04 eV is derived. Theoretical calculations performed at the B3LYP/HW+/6-311++G(3df,3p) level yield thermochemistry in reasonable agreement with experiment. These calculations help identify the structures and electronic states of the species involved and characterize the potential energy surface for the [W,C,4H](+) system.     

Competition between amide stacking and intramolecular H bonds in γ-peptide derivatives: controlling nearest-neighbor preferences

Resonant two-photon ionization (R2PI), IR-UV holeburning (IR-UV), and resonant ion-dip infrared spectroscopy (RIDIRS) have been used to record mass-selected, single-conformation ultraviolet and infrared spectra of three simple diamide derivatives of γ-amino acids as isolated molecules cooled in a supersonic expansion. This work builds on an earlier study of Ac-γ(2)-hPhe-NHMe (James, W. H., III, et al. J. Am. Chem. Soc. 2009, 131, 14243), which showed that this methyl-capped γ-peptide forms amide-stacked conformations that are similar in stability to H-bonded conformations containing a C9 ring and more stable than C7 H-bonded ring structures. Among the γ-peptides discussed here, Ac-γ(2)-hPhe-N(Me)(2) contains an additional methyl group relative to the previously studied Ac-γ(2)-hPhe-NHMe and therefore lacks the amide NH group responsible for C9 ring formation. Three conformations of Ac-γ(2)-hPhe-N(Me)(2) are observed, all of which are amide-stacked structures. In a second new molecule, Ac-γ(2)-hPhe-NH(iPr), the C-terminal NHMe group of Ac-γ(2)-hPhe-NHMe is replaced with an NH(iPr) group. Three conformations of Ac-γ(2)-hPhe-NH(iPr) are observed, all of which are C9 H-bonded structures. The dramatic difference between C-terminal NHMe and NH(iPr) reveals the delicate balance of noncovalent forces within these γ-peptides. The third molecule we examined is a gabapentin-derived diamide (designated 1), which contains a phenylacyl group at the N-terminus and an N(Me)(2) group at the C-terminus; the latter precludes C9 H bonding. Comparison of 1 with Ac-γ(2)-hPhe-N(Me)(2) allows us to examine the impact of the backbone substitution pattern (monosubstitution at carbon-2 vs disubstitution at carbon-3) on the competition between the C7 H-bonded and the amide-stacked conformation. In this case, only C7 rings are observed. The different gas-phase behaviors observed among the molecules analyzed here offer insight on the intrinsic conformational propensities of the γ-peptide backbone, information that provides a foundation for future foldamer design efforts.     

Single-strand helical complexes constructed from 2-pyridinyl-3-pyridinylmethanone: tuning the helical pitch length by variation of metal cation and/or counter anion

The new ligand 2-pyridinyl-3-pyridinylmethanone (L) proves to be an excellent building block for the construction of single-strand helical architectures. A series of helical complexes have been synthesized by the reaction of L with various metal salts, in which L exhibits three kinds of coordination modes involving two kinds of bridging conformations, resulting in four types of single-strand helical chains. The counter anions in the series of 2(1) helical silver(I) complexes {[Ag(L)]X}(infinity)(X = NO(3), 1; PF(6), 2; BF(4), 3; ClO(4), 4; CF(3)CO(2), 5; CF(3)SO(3), 6) are fully or partially embedded inside the cylindrical helix, and the pitch length corresponds not only to the size of the anion but also to its manner of docking into the groove of the helix. Formation of the helical structure in {[Cu(L)(CH(3)CN)(H(2)O)(ClO(4))]ClO(4)}(infinity)(7) is driven by Ow-H...O (perchlorate) hydrogen bonding that leads to a stable triangular motif which rigidly fixes the configuration of the helix. In {[Co(L)(H(2)O)(3)](ClO(4))(2).2H(2)O}(infinity)(8) and {[Zn(L)(H(2)O)(3)](CF(3)SO(3))(2).H(2)O}(infinity)(9), similar helical chains without anion embedment suggest that the pitch length can be tuned by the size of metal cations. Notably, complex {[Ag(L)]CF(3)SO(3)}(infinity)(10), a conformational polymorph of , has a 4(1) helix induced by argentophilic interaction.     

Infrared spectroscopy of Cu+(H2O)(n) and Ag+(H2O)(n): coordination and solvation of noble-metal ions

M(+)(H(2)O)(n) and M(+)(H(2)O)(n)Ar ions (M=Cu and Ag) are studied for exploring coordination and solvation structures of noble-metal ions. These species are produced in a laser-vaporization cluster source and probed with infrared (IR) photodissociation spectroscopy in the OH-stretch region using a triple quadrupole mass spectrometer. Density functional theory calculations are also carried out for analyzing the experimental IR spectra. Partially resolved rotational structure observed in the spectrum of Ag(+)(H(2)O)(1) x Ar indicates that the complex is quasilinear in an Ar-Ag(+)-O configuration with the H atoms symmetrically displaced off axis. The spectra of the Ar-tagged M(+)(H(2)O)(2) are consistent with twofold coordination with a linear O-M(+)-O arrangement for these ions, which is stabilized by the s-d hybridization in M(+). Hydrogen bonding between H(2)O molecules is absent in Ag(+)(H(2)O)(3) x Ar but detected in Cu(+)(H(2)O)(3) x Ar through characteristic changes in the position and intensity of the OH-stretch transitions. The third H(2)O attaches directly to Ag(+) in a tricoordinated form, while it occupies a hydrogen-bonding site in the second shell of the dicoordinated Cu(+). The preference of the tricoordination is attributable to the inefficient 5s-4d hybridization in Ag(+), in contrast to the extensive 4s-3d hybridization in Cu(+) which retains the dicoordination. This is most likely because the s-d energy gap of Ag(+) is much larger than that of Cu(+). The fourth H(2)O occupies the second shells of the tricoordinated Ag(+) and the dicoordinated Cu(+), as extensive hydrogen bonding is observed in M(+)(H(2)O)(4) x Ar. Interestingly, the Ag(+)(H(2)O)(4) x Ar ions adopt not only the tricoordinated form but also the dicoordinated forms, which are absent in Ag(+)(H(2)O)(3) x Ar but revived at n=4. Size dependent variations in the spectra of Cu(+)(H(2)O)(n) for n=5-7 provide evidence for the completion of the second shell at n=6, where the dicoordinated Cu(+)(H(2)O)(2) subunit is surrounded by four H(2)O molecules. The gas-phase coordination number of Cu(+) is 2 and the resulting linearly coordinated structure acts as the core of further solvation processes.     

C(3P)与H2S反应的反应机理

The mechanisms of the C(3P)+H 2S→HCS+H and C(3P)+H 2S → HSC+H reactions have been studied at the UMP2/6-31G(d,p),UMP2/6-311G(d,p),and G2 levels, and six transition states and three intermediates have been located along the reaction paths. The predicted path for the C(3P)+H2S→HCS+H reaction is: C(3P)+H2S→IM1→TS1→IM2→TS4→HCS+H, in line with the reaction process suggested by Lee et al. [1] in which only the intermediates were given. Our energetic results indicate that the C(3P)+H2S→HCS+H reaction is more favorable than the C(3P)+H 2S→HSC+H reaction, in agreement with experiment.     

Ion-pair dissociation dynamics of H2S in the photon energy range 15.26-15.55 eV

The H(+) velocity map images from the ion-pair dissociation of H(2)S + hν → SH(-)(X(1)Σ(+), υ = 0, 1) + H(+) have been measured at the excitation energies 15.259, 15.395, and 15.547 eV, respectively. The experimental results show that most of the available energies are transformed into the translational energies. The angular distributions of the fragments SH(-)(X(1)Σ(+), υ = 0) indicate that the dissociation occurs via pure parallel transition with limiting anisotropy parameter of +2. Because the ion-pair dissociation usually occurs via the predissociation of Rydberg states, this suggests that the ion cores of the excited Rydberg states have linear geometries. The geometries and electronic structures of the linear H(2)S(+) have been calculated employing the quantum chemistry calculation method at the CASPT2/avqz level. The electronic structures for the ion-pair states have been calculated at the CASSCF/avtz level, which indicates that the equilibrium geometries of the ion-pair states have bent geometries.     

Proton formation in 2+1 resonance enhanced multiphoton excitation of HCl and HBr via (Omega=0) Rydberg and ion-pair states

Molecular beam cooled HCl was state selected by two-photon excitation of the V (1) summation operator(0(+)) [v=9,11-13,15], E (1) summation operator(0(+)) [v=0], and g (3) summation operator(-)(0(+)) [v=0] states through either the Q(0) or Q(1) lines of the respective (1,3) summation operator(0(+))<--<--X (1) summation operator(0(+)) transition. Similarly, HBr was excited to the V (1) summation operator(0(+)) [v=m+3, m+5-m+8], E (1) summation operator(0(+)) [v=0], and H (1) summation operator(0(+)) [v=0] states through the Q(0) or Q(1) lines. Following absorption of a third photon, protons were formed by three different mechanisms and detected using velocity map imaging. (1) H(*)(n=2) was formed in coincidence with (2)P(i) halogen atoms and subsequently ionized. For HCl, photodissociation into H(*)(n=2)+Cl((2)P(12)) was dominant over the formation of Cl((2)P(32)) and was attributed to parallel excitation of the repulsive [(2) (2)Pi4llambda] superexcited (Omega=0) states. For HBr, the Br((2)P(32))Br((2)P(12)) ratio decreases with increasing excitation energy. This indicates that both the [(3) (2)Pi(12)5llambda] and the [B (2) summation operator5llambda] superexcited (Omega=0) states contribute to the formation of H(*)(n=2). (2) For selected intermediate states HCl was found to dissociate into the H(+)+Cl(-) ion pair with over 20% relative yield. A mechanism is proposed by which a bound [A (2) summation operatornlsigma] (1) summation operator(0(+)) superexcited state acts as a gateway state to dissociation into the ion pair. (3) For all intermediate states, protons were formed by dissociation of HX(+)[v(+)] following a parallel, DeltaOmega=0, excitation. The quantum yield for the dissociation process was obtained using previously reported photoionization efficiency data and was found to peak at v(+)=6-7 for HCl and v(+)=12 for HBr. This is consistent with excitation of the repulsive A(2) summation operator(12) and (2) (2)Pi states of HCl(+), and the (3) (2)Pi state of HBr(+). Rotational alignment of the Omega=0(+) intermediate states is evident from the angular distribution of the excited H(*)(n=2) photofragments. This effect has been observed previously and was used here to verify the reliability of the measured spatial anisotropy parameters.     

Potential energy surface for activation of methane by Pt(+): a combined guided ion beam and DFT study

A guided-ion beam tandem mass spectrometer is used to study the reactions of Pt(+) with methane, PtCH(2)(+) with H(2) and D(2), and collision-induced dissociation of PtCH(4)(+) and PtCH(2)(+) with Xe. These studies experimentally probe the potential energy surface for the activation of methane by Pt(+). For the reaction of Pt(+) with methane, dehydrogenation to form PtCH(2)(+) + H(2) is exothermic, efficient, and the only process observed at low energies. PtH(+), formed in a simple C-H bond cleavage, dominates the product spectrum at high energies. The observation of a PtH(2)(+) product provides evidence that methane activation proceeds via a (H)(2)PtCH(2)(+) intermediate. Modeling of the endothermic reaction cross sections yields the 0 K bond dissociation energies in eV (kJ/mol) of D(0)(Pt(+)-H) = 2.81 +/- 0.05 (271 +/- 5), D(0)(Pt(+)-2H) = 6.00 +/- 0.12 (579 +/- 12), D(0)(Pt(+)-C) = 5.43 +/- 0.05 (524 +/- 5), D(0)(Pt(+)-CH) = 5.56 +/- 0.10 (536 +/- 10), and D(0)(Pt(+)-CH(3)) = 2.67 +/- 0.08 (258 +/- 8). D(0)(Pt(+)-CH(2)) = 4.80 +/- 0.03 eV (463 +/- 3 kJ/mol) is determined by measuring the forward and reverse reaction rates for Pt(+) + CH(4) right harpoon over left harpoon PtCH(2)(+) + H(2) at thermal energy. We find extensive hydrogen scrambling in the reaction of PtCH(2)(+) with D(2). Collision-induced dissociation (CID) of PtCH(4)(+), identified as the H-Pt(+)-CH(3) intermediate, with Xe reveals a bond energy of 1.77 +/- 0.08 eV (171 +/- 8 kJ/mol) relative to Pt(+) + CH(4). The experimental thermochemistry is favorably compared with density functional theory calculations (B3LYP using several basis sets), which also establish the electronic structures of these species and provide insight into the reaction mechanism. Results for the reaction of Pt(+) with methane are compared with those for the analogous palladium system and the differences in reactivity and mechanism are discussed.     

Guided ion beam and theoretical study of the reactions of Au+ with H2, D2, and HD

Reactions of the late third-row transition metal cation Au(+) with H(2), D(2), and HD are examined using guided ion beam tandem mass spectrometry. A flow tube ion source produces Au(+) in its (1)S (5d(10)) electronic ground state level. Corresponding state-specific reaction cross sections for forming AuH(+) and AuD(+) as a function of kinetic energy are obtained and analyzed to give a 0 K bond dissociation energy of D(0)(Au(+)-H) = 2.13 ± 0.11 eV. Quantum chemical calculations at the B3LYP∕HW+∕6-311+G(3p) and B3LYP∕Def2TZVPP levels performed here show good agreement with the experimental bond energy. Theory also provides the electronic structures of these species and the reactive potential energy surfaces. We also compare this third-row transition metal system with previous results for analogous reactions of the first-row and second-row congeners, Cu(+) and Ag(+). We find that Au(+) has a stronger M(+)-H bond, which can be explained by the lanthanide contraction and relativistic effects that alter the relative size of the valence s and d orbitals. Results from reactions with HD provide insight into the reaction mechanism and indicate that ground state Au(+) reacts largely via a direct mechanism, in concordance with the behavior of the lighter group 11 metal ions, but includes more statistical behavior than these metals as well.     

A kinetic study of the reactions of Ca+ ions with O3, O2, N2, CO2 and H2O

The reactions between Ca(+)(4(2)S(1/2)) and O(3), O(2), N(2), CO(2) and H(2)O were studied using two techniques: the pulsed laser photo-dissociation at 193 nm of an organo-calcium vapour, followed by time-resolved laser-induced fluorescence spectroscopy of Ca(+) at 393.37 nm (Ca(+)(4(2)P(3/2)-4(2)S(1/2))); and the pulsed laser ablation at 532 nm of a calcite target in a fast flow tube, followed by mass spectrometric detection of Ca(+). The rate coefficient for the reaction with O(3) is essentially independent of temperature, k(189-312 K) = (3.9 +/- 1.2) x 10(-10) cm(3) molecule(-1) s(-1), and is about 35% of the Langevin capture frequency. One reason for this is that there is a lack of correlation between the reactant and product potential energy surfaces for near coplanar collisions. The recombination reactions of Ca(+) with O(2), CO(2) and H(2)O were found to be in the fall-off region over the experimental pressure range (1-80 Torr). The data were fitted by RRKM theory combined with quantum calculations on CaO(2)(+), Ca(+).CO(2) and Ca(+).H(2)O, yielding the following results with He as third body when extrapolated from 10(-3)-10(3) Torr and a temperature range of 100-1500 K. For Ca(+) + O(2): log(10)(k(rec,0)/cm(6) molecule(-2) s(-1)) = -26.16 - 1.113log(10)T- 0.056log(10)(2)T, k(rec,infinity) = 1.4 x 10(-10) cm(3) molecule(-1) s(-1), F(c) = 0.56. For Ca(+) + CO(2): log(10)(k(rec,0)/ cm(6) molecule(-2) s(-1)) = -27.94 + 2.204log(10)T- 1.124log(10)(2)T, k(rec,infinity) = 3.5 x 10(-11) cm(3) molecule(-1) s(-1), F(c) = 0.60. For Ca(+) + H(2)O: log(10)(k(rec,0)/ cm(6) molecule(-2) s(-1)) = -23.88 - 1.823log(10)T- 0.063log(10)(2)T, k(rec,infinity) = 7.3 x 10(-11)exp(830 J mol(-1)/RT) cm(3) molecule(-1) s(-1), F(c) = 0.50 (F(c) is the broadening factor). A classical trajectory analysis of the Ca(+) + CO(2) reaction is then used to investigate the small high pressure limiting rate coefficient, which is significantly below the Langevin capture frequency. Finally, the implications of these results for calcium chemistry in the mesosphere are discussed.