Industrial wastes as low-cost potential adsorbents for the treatment of wastewater laden with heavy metals

Industrial wastes, such as, fly ash, blast furnace slag and sludge, black liquor lignin, red mud, and waste slurry, etc. are currently being investigated as potential adsorbents for the removal of the heavy metals from wastewater. It was found that modified industrial wastes showed higher adsorption capacity. The application of low-cost adsorbents obtained from the industrial wastes as a replacement for costly conventional methods of removing heavy metal ions from wastewater has been reviewed. The adsorption mechanism, influencing factors, favorable conditions, and competitive ions etc. on the adsorption of heavy metals have also been discussed in this article. From the review, it is evident that certain industrial waste materials have demonstrated high removal capacities for the heavy metals laden with wastewater. However, it is to be mentioned that adsorption capacities of the adsorbents vary depending on the characteristics of the adsorbents, the extent of chemical modification and the concentration of adsorbates. There are also few issues and drawbacks on the utilization of industrial wastes as low-cost adsorbents that have been addressed. In order to find out the practical utilization of industrial waste as low-cost adsorbents on the commercial scale, more research should be conducted in this direction.     

Design and evaluation of functionalized multi-walled carbon nanotubes by 3-aminopyrazole for the removal of Hg(II) and As(III) ions from aqueous solution

Carboxylated multi-walled carbon nanotubes (MWCNTs-COOH) were chemically modified with 3-aminopyrazole (MWCNTs-f) and applied as an efficient adsorbent to mercury and arsenic adsorption from aqueous solutions. The adsorbents were characterized by FT-IR, EDX, FE-SEM, TGA, and BET. The effects of pH, adsorbent dose, and initial ions concentration on the adsorption efficiency and the optimum conditions were investigated by central composite design. The optimum conditions were obtained at pH 7.6–7.9, adsorbent dose 20 mg, and initial ions concentration 20 ppm. So the maximum adsorption efficiencies in these conditions were 80.5 and 72.4% for the removal of Hg(II) and As(III) by MWCNTs-f, respectively. The quadratic model was used for the analysis of variance and indicated that adsorption of metal ions strongly depends on pH. Also, the pseudo-second-order model has been achieved from the adsorption kinetic studies. Furthermore, the experimental data were well fitted to the Langmuir isotherm and the maximum adsorption capacities obtained were 112 and 133 mg g^?1 for the adsorption of Hg(II) and As(III) by MWCNTs-f, respectively. Moreover, a thermodynamic study revealed that the adsorption reactions were spontaneous and endothermic with the increase in randomness. In addition, a desorption study showed the favorable regeneration ability of MWCNTs-f even after three adsorption–desorption cycles. Therefore, the MWCNTs-f adsorbent has good potential for the removal of Hg(II) and As(III) pollutants from aqueous solutions.     

Preparation of silicon-doped ferrihydrite for adsorption of lead and cadmium: Property and mechanism

In this study, Si-doped ferrihydrite (Si-Fh) was successfully synthesized by a simple coprecipitation method for removal of heavy metals in water. Subsequently, the physicochemical properties of Si-Fh before and after adsorption were further studied using several techniques. The Si-Fh exhibited good adsorption capacity for heavy metal ions such as Pb(II) and Cd(II). The maximum adsorption capacities of lead and cadmium are respectively 105.807, 37.986 mg/g. The distribution coefficients of the materials for Pb(II) and Cd(II) also showed a great affinity (under optimal conditions). Moreover, it was found that the adsorption fit well with the Freundlich isotherm and pseudo-second-order kinetic model which means this was a chemical adsorption process. It can be conducted from both characterization and model results that adsorption of Pb(II) and Cd(II) was mainly through the complexation interaction of abundance oxygen functional groups on the surface of Si-Fh. Overall, the Si-Fh adsorbents with many superiorities have potential for future applications in the removal of Pb(II) and Cd(II) from wastewater.     

Study of physical chemistry on biosorption of zinc by using Chlorella pyrenoidosa

Discharge of heavy metals from metal processing industries is known to have adverse effects on the environment. Biosorption of heavy metals by metabolically inactive biomass of microbial organisms is an innovative and alternative technology for removal of these pollutants from aqueous solution. Presence of heavy metals in the aquatic system is posing serious problems. Zinc has been used in many industries and removal of Zn ions from waste water is significant. Biosorption is one of the economic methods used for removal of heavy metals. In the present study, the biomass obtained from the dried Chlorella pyrenoidosa was used for evaluating the biosorption characteristics of Zn ions in aqueous solutions. Batch adsorption experiments were performed with this material and it was found that the amount of metal ions adsorbed increased with the increase in the initial metal ion concentration. In this study effect of agitation time, initial metal ion concentration, temperature, pH and biomass dosage were studied. Maximum metal uptake (q _max) observed at pH 5 was 101.11 mg/g. The biosorption followed both Langmuir and Freundlich isotherm model. The adsorption equilibrium was reached in about 1 h. The kinetic of biosorption followed the second-border rate. The biomass could be regenerated using 0.1 M HNO₃. A positive value of ΔH° indicated the endothermic nature of the process. A negative value of the free energy (ΔG°) indicated the spontaneous nature of the adsorption process. A positive value of ΔS° showed increased randomness at solid-liquid interface during the adsorption of heavy metals, it also suggests some structural changes in the adsorbate and the adsorbent. FTIR Spectrums of Chlorella pyrenoidosa revealed the presence of hydroxyl, amino, carboxylic and carbonyl groups. The scanning electron micrograph clearly revealed the surface texture and morphology of the biosorbent.     

Efficient Removal of Pb(II) from Aqueous Medium Using Chemically Modified Silica Monolith

The adsorptive removal of lead (II) from aqueous medium was carried out by chemically modified silica monolith particles. Porous silica monolith particles were prepared by the sol-gel method and their surface modification was carried out using trimethoxy silyl propyl urea (TSPU) to prepare inorganic–organic hybrid adsorbent. The resultant adsorbent was evaluated for the removal of lead (Pb) from aqueous medium. The effect of pH, adsorbent dose, metal ion concentration and adsorption time was determined. It was found that the optimum conditions for adsorption of lead (Pb) were pH 5, adsorbent dose of 0.4 g/L, Pb(II) ions concentration of 500 mg/L and adsorption time of 1 h. The adsorbent chemically modified SM was characterized by scanning electron microscopy (SEM), BET/BJH and thermo gravimetric analysis (TGA). The percent adsorption of Pb(II) onto chemically modified silica monolith particles was 98%. An isotherm study showed that the adsorption data of Pb(II) onto chemically modified SM was fully fitted with the Freundlich and Langmuir isotherm models. It was found from kinetic study that the adsorption of Pb(II) followed a pseudo second-order model. Moreover, thermodynamic study suggests that the adsorption of Pb(II) is spontaneous and exothermic. The adsorption capacity of chemically modified SM for Pb(II) ions was 792 mg/g which is quite high as compared to the traditional adsorbents. The adsorbent chemically modified SM was regenerated, used again three times for the adsorption of Pb(II) ions and it was found that the adsorption capacity of the regenerated adsorbent was only dropped by 7%. Due to high adsorption capacity chemically modified silica monolith particles could be used as an effective adsorbent for the removal of heavy metals from wastewater.     

Synthesis, characterization, thermodynamic and kinetic investigations on uranium (VI) adsorption using organic-inorganic composites: Zirconyl-molybdopyrophosphate-tributyl phosphate

Zirconyl-molybdopyrophosphate-tributyl phosphate (ZMPP-TBP) was a novel organic-inorganic composite adsorbent prepared by co-precipitation method and used in the adsorption of uranium from aqueous solution in batch adsorption experiments. The as-obtained product was characterized using SEM, energy dispersive X-ray spectroscopy (EDX), XRD and BET-N₂ adsorption measurements. The study had been conducted to investigate the effects of solution pH, temperature, contact time, initial concentration and coexisting ions. A maximum removal of 99.31% was observed for an initial concentration 5 mg/L, at pH 6.0 and an adsorbent dose of 1.0 g/L. The isothermal data were fitted with both Langmuir and Freundlich equations, but the data fitted the former better than the latter. According to the evaluation using the Langmuir equation, the maximum adsorption capacity of uranium (VI) was 196.08 mg/g at 293 K and pH 6.0. The pseudo-first-order kinetic model and pseudo-second-order kinetic model were used to describe the kinetic data, and the pseudo-second-order kinetic model was better. The thermodynamic parameter ΔG was calculated, the negative ΔG values of uranium (VI) at different temperature showed that the adsorption process was spontaneous. The good reusability of ZMPP-TBP also indicated that the ZMPP-TBP was a very promising adsorbent for uranium adsorption from aqueous solution.     

Kinetic,isothermal and thermodynamic studies on Th(IV) adsorption by different modified activated carbons

In this study, the performance of modified adsorbents obtained from activated carbon for the adsorption of thorium(IV) ions from aqueous media was investigated. The analytical and spectroscopic methods such as FT-IR, BET, SEM and UV–Vis were used to examine the properties of the modified materials. According to the analysis results, the both adsorbents had large surface areas after modification. Then, temperature, pH, mixing time and solution concentration parameters were observed to determine optimum thorium adsorption conditions on modified materials. The obtained results from the experiments were applied different three kinetic models and adsorption isotherms and thermodynamic parameters were calculated and then all of the results were interpreted. The adsorption process for both adsorption systems was observed to be compatible with the pseudo-second-order kinetic model. The adsorption equilibrium data were best described by the Langmuir model for modified adsorbent with KMnO₄ and by the Freundlich model for modified adsorbent with NaOH. Furthermore, the calculated thermodynamic parameters (ΔG°, ΔH° and ΔS°) showed that the both adsorption processes were endothermic and spontaneous. The data show that modified adsorbents can be used as influential and low-cost adsorbents to remove thorium ion. Modified new adsorbents were highly selective for thorium ion in competitive adsorption studies.

     

Removal of copper from aqueous solution by aminated and protonated mesoporous aluminas: kinetics and equilibrium

A novel adsorbent, aminated and protonated mesoporous alumina, was prepared and employed for the removal of copper from aqueous solution at concentrations between 5 and 30 mg/l, in batch equilibrium experiments, in order to determine its adsorption properties. The removal of copper by the adsorbents increases with increasing adsorbent dosages. The adsorption mechanism is assumed to be an ion exchange between copper and the hydrogen ions present on the surface of the mesoporous alumina. The adsorbent was characterized by XRD, TEM, SEM, and BET methods. The sorption data have been analyzed and fitted to linearized adsorption isotherm of the Freundlich, Langmuir, and Redlich-Peterson models. The batch sorption kinetics have been tested for first-order, pseudo-first-order, and pseudo-second-order kinetic reaction models. The rate constants of adsorption for all these kinetic models have been calculated. Results also showed that the intraparticle diffusion of Cu(II) on the mesoporous catalyst was the main rate-limiting step.     

Uranium extraction from aqueous solution using dried and pyrolyzed tea and coffee wastes

The adsorption of U(VI) onto dried and pyrolyzed tea and coffee wastes was investigated. The adsorption properties of the materials were characterized by measuring uranium uptake as a function of solution pH, kinetics and adsorption isotherms. pH profile of uranium adsorption where UO₂ ²⁺ is expected to be the predominant species was measured between pH 0 and 4. Both Langmuir and Freundlich adsorption models were used to describe adsorption equilibria, and corresponding constants evaluated. Using the Langmuir model, the maximum adsorption capacity of uranium by dried tea and coffee wastes was 59.5 and 34.8 mg/g, respectively at 291 K. Adsorption thermodynamic constants, ΔH° ΔS° and ΔG° were also calculated from adsorption data obtained at three different temperatures. Adsorption thermodynamics of uranyl ions on dried tea and coffee systems indicated spontaneous and endothermic processes. Additionally, a Lagergren pseudo-second-order kinetic model was used to fit the kinetic experimental data for both adsorbents and the constants evaluated. Dried tea and coffee wastes proved to be effective adsorbents with high capacities and significant advantage of a very low cost.     

Adsorption of some bivalent heavy metal ions from aqueous solutions by manganese nodule leached residues

The leached residue, generated after selective extraction of Cu, Ni, and Co in sulfur dioxide-ammonia leaching of manganese nodules, was characterized and batch isothermal adsorption experiments were conducted at ambient temperature to evaluate the effectiveness of the water-washed leached residue for removal of different bivalent metal ions from aqueous synthetic solutions. The effects of pH, initial metal ion concentrations, amount of adsorbent, interfering ions, and heat treatment were also investigated. The uptake of metal ions increased with increasing pH. Under identical conditions the adsorption capacity increased in the order Cd(2+)相似文献   

Diethylenetriamine-grafted poly(glycidyl methacrylate) adsorbent for effective copper ion adsorption

Amine-functionalized adsorbents have attracted increasing interest in recent years for heavy metal removal. In this study, diethylenetriamine (DETA) was successfully grafted (through a relatively simple solution reaction) onto poly(glycidyl methacrylate) (PGMA) microgranules to obtain an adsorbent (PGMA-DETA) with a very high content of amine groups and the PGMA-DETA adsorbent was examined for copper ion removal in a series of batch adsorption experiments. It was found that the PGMA-DETA adsorbent achieved excellent adsorption performance in copper ion removal and the adsorption was most effective at pH>3 in the pH range of 1-5 examined. X-ray photoelectron spectroscopy (XPS) revealed that there were different types of amine sites on the surfaces of the PGMA-DETA adsorbent but copper ion adsorption was mainly through forming surface complexes with the neutral amine groups on the adsorbent, resulting in better adsorption performance at a higher solution pH value. The adsorption isotherm data best obeyed the Langmuir-Freundlich model and the adsorption capacity reached 1.5 mmol/g in the case of pH 5 studied. The adsorption process was fast (with adsorption equilibrium time less than 1-4 h) and closely followed the pseudo-second-order kinetic model. Desorption of copper ions from the PGMA-DETA adsorbent was most effectively achieved in a 0.1 M dilute nitric acid solution, with 80% of the desorption being completed within the first 1 min. Consecutive adsorption-desorption experiments showed that the PGMA-DETA adsorbent can be reused almost without any loss in the adsorption capacity.     

Equilibrium,kinetic, and thermodynamic studies of lead ion adsorption from mine wastewater onto MoS2-clinoptilolite composite

This work explored the potential of clinoptilolite, molybdenum sulphide (MoS₂), and MoS₂-clinoptilolite composite in lead (Pb) removal from aqueous medium and industrial mining wastewater. MoS₂-clinoptilolite composite was successfully prepared by a hydrothermal method. The surface properties, structure, and composition of the synthesized composite and the parent compounds were analyzed by scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy. The removal efficiency of lead from aqueous solution was studied in batch-mode experiments. The MoS₂-clinoptilolite was used for the removal of Pb ions (50 mg/L) from an aqueous solution: ~100% of the Pb was removed with a MoS₂-clinoptilolite dose of 0.075 g, pH 6 at 328K within 90 min. The adsorption capacities of Pb onto MoS₂-clinoptilolite were found to be higher than those onto clinoptilolite. Metal ion adsorption behavior was well explained by the Freundlich model, that is, multilayer adsorption of Pb molecules occurred on the heterogeneous surface of adsorbents in case of clinoptilolite, while in the case of MoS₂-clinoptilolite, the Langmuir model was suitable, that is, the adsorption occurred on a monolayer surface. The rate of Pb adsorption was explained by pseudo-second-order model suggesting that the adsorption process is presumably chemisorption. Thermodynamic parameters such as ΔH°, ΔS°, and ΔG° were calculated, which indicated that the adsorption was spontaneous and exothermic in nature. The selectivity of each adsorbent for Pb was also tested by adding the adsorbents to real gold mine water which contains competitive metal ions.     

Adsorption of Pb(II) and Ni(II) From Aqueous Solution by a High-Capacity Industrial Sewage Sludge-Based Adsorbent

In the present study, adsorption of Ni(II) and Pb(II) from aqueous solution was investigated using activated carbon synthesized with industrial wastewater sludge. The synthesized adsorbent was analyzed using nitrogen adsorption–desorption and Fourier transfer infrared (FTIR) techniques. Batch adsorption mode was used to evaluate the effect of solution pH, contact time, adsorbent dose, initial metal ion concentration, and temperature on the adsorption capacity of the synthesized adsorbent. The kinetic data were analyzed using different kinetic models. The pseudo-second-order equation gave the best fit to the experimental data for both metal ions. The equilibrium isotherm data were analyzed using the Langmuir, Freundlich, and Dubinin–Radushkevich (D–R) isotherm models. The results showed that the data obtained for the Ni(II) and Pb(II) adsorption are in good agreement with the Langmuir model. The Langmuir mono-layer maximum adsorption capacities for Ni(II) and Pb(II) ions were estimated to be 74.06 and 88.76 mg g^?1 at 25°C, respectively. In addition, the thermodynamic studies proved that the adsorption process of both metals could be considered endothermic.     

Adsorption of Sr by immobilized microorganisms

Wastewaters from numerous industrial and laboratory operations can contain toxic or undesirable components such as metal ions, which must be removed before discharge to surface waters. Adsorption processes that have high removal efficiencies are attractive methods for removing such contaminants. For economic operations, it is desirable to have an adsorbent that is selective for the metal contaminant of interest, has high capacity for the contaminant, has rapid adsorption kinetics, can be economically produced, and can be regenerated to a concentrated waste product or decomposed to a low-volume waste. Selected microorganisms are potentially useful adsorbents for these applications because they can be inexpensive, have high selectivities, and have high capacities for adsorption of many heavy metals, which are often problems in a variety of industries.     

Properties of new fibrous adsorbents with amidoxyme and hydrazidine groups

Data on sorption properties of new fibrous adsorbents with respect to heavy metals are presented. The POLYORGS 34 and POLYORGS 35 filled fibrous adsorbents and POLYORGS 33 fibrous adsorbent contain amidoxyme and hydrazidine groups. Is has been shown that these adsorbents can be used for the adsorption preconcentration of heavy, noble, and rare metals and radionuclides from aqueous salt solutions. Examples of using adsorbents under study for the dynamic preconcentration of copper from a 0.5 M NaCl solution during filtration through a series of disks, column, or adsorption cartridges are presented.     

Removal of Cd(II), Cu(II), and Pb(II) by adsorption onto natural clay: a kinetic and thermodynamic study

In this work, we study the elimination of three bivalent metal ions (Cd²⁺, Cu²⁺, and Pb²⁺) by adsorption onto natural illitic clay (AM) collected from Marrakech region in Morocco. The characterization of the adsorbent was carried out by X-ray fluorescence, Fourier transform infrared spectroscopy and X-ray diffraction. The influence of physicochemical parameters on the clay adsorption capacity for ions Cd²⁺, Cu²⁺, and Pb²⁺, namely the adsorbent dose, the contact time, the initial pH imposed on the aqueous solution, the initial concentration of the metal solution and the temperature, was studied. The adsorption process is evaluated by different kinetic models such as the pseudo-first-order, pseudo-second-order, and Elovich. The adsorption mechanism was determined by the use of adsorption isotherms such as Langmuir, Freundlich, and Temkin models. Experiments have shown that heavy metals adsorption kinetics onto clay follows the same order, the pseudo-second order. The isotherms of adsorption of metal cations by AM clay are satisfactorily described by the Langmuir model and the maximum adsorption capacities obtained from the natural clay, using the Langmuir isotherm model equation, are 5.25, 13.41, and 15.90 mg/g, respectively for Cd(II), Cu(II), and Pb(II) ions. Adsorption of heavy metals on clay is a spontaneous and endothermic process characterized by a disorder of the medium. The values of ΔH are greater than 40 kJ/mol, which means that the interactions between clay and heavy metals are chemical in nature.     

Adsorption of Heavy Metal Ions from Aqueous Solutions by Zeolite Based on Oil Shale Ash: Kinetic and Equilibrium Studies

Na-A zeolite was successfully synthesized via the alkaline fusion method with oil shale ash as the raw material. The adsorption capacity of it was tested by removing Cu²⁺, Ni²⁺, Pb²⁺ and Cd²⁺ from aqueous solutions. The results reveal the maximum adsorption capacity of adsorbent for Pb²⁺, Cu²⁺, Cd²⁺ and Ni²⁺ were 224.72, 156.74, 118.34 and 53.02 mg/g, respectively. The effects of contact time and pH value of solutions on the adsorption efficiency of the zeolite were evaluated. Besides, The equilibrium adsorption data and the batch kinetic data were correlated with Langmuir and Freundlich models and the pseudo-first-order and pseudo-second-order models separately. The results show that the Langmuir isotherm and the pseudo-second-order equation were more suitable for the adsorption of Na-A zeolite for the metal ions. In addition, Thermodynamic parameters of the adsorption(the Gibbs free energy, entropy, and enthalpy) were also evaluated and discussed. The results demonstrate that the adsorption process was spontaneous and endothermic under natural conditions and the synthesized zeolite was an effective adsorbent for the removal of metal ions from aqueous solution.     

Single-Step Hydrothermal Synthesis of Biochar from H3PO4-Activated Lettuce Waste for Efficient Adsorption of Cd(II) in Aqueous Solution

Developing an ideal and cheap adsorbent for adsorbing heavy metals from aqueous solution has been urgently need. In this study, a novel, effective and low-cost method was developed to prepare the biochar from lettuce waste with H₃PO₄ as an acidic activation agent at a low-temperature (circa 200 °C) hydrothermal carbonization process. A batch adsorption experiment demonstrated that the biochar reaches the adsorption equilibrium within 30 min, and the optimal adsorption capacity of Cd(II) is 195.8 mg∙g⁻¹ at solution pH 6.0, which is significantly improved from circa 20.5 mg∙g⁻¹ of the original biochar without activator. The fitting results of the prepared biochar adsorption data conform to the pseudo-second-order kinetic model (PSO) and the Sips isotherm model, and the Cd(II) adsorption is a spontaneous and exothermic process. The hypothetical adsorption mechanism is mainly composed of ion exchange, electrostatic attraction, and surface complexation. This work offers a novel and low-temperature strategy to produce cheap and promising carbon-based adsorbents from organic vegetation wastes for removing heavy metals in aquatic environment efficiently.     

Enhanced Removal of Cu(II) Ions from Aqueous Solution by Poorly Crystalline Hydroxyapatite Nanoparticles

Poorly crystalline and well-dispersed hydroxyapatite (HAP) nanoparticles were synthesized and used as novel adsorbents for the removal of Cu(II) from aqueous solution. Various factors affecting the adsorption such as adsorbent crystallinity, pH, adsorbent dosage, contact time, temperature, competing cations, and the presence of humic acid were investigated in detail. Results showed that the HAP calcined at lower temperature was poorly crystalline and had better adsorption capacity for Cu(II) than those calcined at higher temperature. Cu(II) removal was increased with increases of pH, adsorbent dosage, temperature, and the presence of humic acid, but decreased as the existence of competing divalent cations. Kinetic studies showed that pseudo-second-order kinetic model better described the adsorption process. Equilibrium data were best described by Langmuir model, and the estimated maximum adsorption capacity of poorly crystalline HAP was 41.80 mg/g at 313 K, displaying higher efficiency for Cu(II) removal than many previously reported adsorbents. Thermodynamics studied revealed that the adsorption of Cu(II) by poorly crystalline HAP was spontaneous, endothermic, and entropy-increasing in nature. This study showed that poorly crystalline HAP could be used as an efficient adsorbent material for the removal of Cu(II) from aqueous solution.     

Laterite clay-based geopolymer as a potential adsorbent for the heavy metals removal from aqueous solutions

This study is focused on the investigation of low iron lateritic clay-based geopolymer as a potential adsorbent for the higher uptake of Ni(II) and Co(II) ions from aqueous solutions. BET analysis revealed that the sieved geopolymer sample (SGS) was characterized by 17.441 m²/g of surface area, 0.005 cm³/g of pore volume, and 13.549 Å of pore diameter. SEM investigation confirmed the presence of pores and cavities onto the surface of SGS. XRD analysis showed that the geopolymer is semi-crystalline in nature. It was found that the adsorption ability of SGS remained 520 mg/g for Ni(II) ions and 500 mg/g for Co(II) ions when 0.5 M solutions were stirred with SGS for 60 min. The temperature and pH of the solution were maintained at 60 °C and 7.0, respectively. The adsorption data of both heavy metal (HM) ions fitted best in the pseudo-second-order kinetic model. The low activation energy value i.e. 2.507 kJ/mol for Ni(II) ions and 2.286 kJ/mol for Co(II) ions confirmed adsorption is physisorption. Adsorption data were tested with Langmuir and Freundlich models, the data showed comparatively better fitting in the Freundlich model. The greater value of monolayer adsorption capacity (Xm) for Ni(II) ions was found 1.77 × 10⁻² mol/g while for Co(II) ions it remained 1.69 × 10⁻² mol/g confirming the better interaction of metal ions with the adsorbent surface. Negative values of ΔG° confirmed the spontaneity of the process while the positive value of ΔS° showed the randomness of adsorbate particles. The positive value of ΔH° showed that the adsorption process remained endothermic for both HM ions. The experimental results confirmed the ability of laterite clay-based geopolymer for better removal of HM ions and hence can be employed for the wastewater treatment processes at low-cost adsorbent.