含有机硅三元嵌段共聚物的研究：Ⅰ.含有机硅三元嵌段共聚物的合成

利用硅胺基与羟基缩合生成硅醚的不可逆反应,合成以聚砜或聚芳砜为硬段,聚对羟基苯乙烯或酚醛等低聚物为半硬段,硅氧烷为软段组成的三元嵌段共聚物。详细讨论了反应物种类、溶剂、浓度、反应温度和时间等对三元嵌段共聚反应的影响,确定了不同硬段和半硬段的反应活性次序,总结出较佳的合成工艺,制得了高分子量的三元嵌段共聚合物。根据反应过程中的特性粘度及,IR谱图的变化对三元共聚反应历程作了初步探讨。     

聚砜-聚羟基醚嵌段共聚体的合成与表征

在碱性条件下由羟端基聚砜与双酚A环氧氯丙烷相互作用下制取了聚砜-聚羟基醚嵌段共聚物。溶解度试验、红外光谱、动态和静态力学试验等证明产物确是嵌段共聚物。     

含有机硅多嵌段共聚物的研究Ⅳ.含有机硅多嵌段共聚物的富氧功能

研究了几种新型含有机硅二元和三元多嵌段共聚物的氧、氮选择透过性能。其中双酚A聚羟基醚-聚二甲基硅氧烷二元多嵌段共聚物-(PHE-PDMS)_n的透氧系数Po_2=510Barrer、氧氮分离系数a o_2/N_2=2.2,聚苯醚-聚二甲基硅氧烷-聚对羟基苯乙烯三元多嵌段共聚物-(PPO-PDMS-pHS)_n的Po_2=156 Barrer、do_2/N_2=2.4,两者都具有良好的力学性能。此外,含有机硅三元多嵌段共聚物与聚三甲硅基丙炔(PTMSP)起薄复合后,改善了PTMSP超薄膜的透气稳定性。其JO_2≈1.0×10~(-3)cm~2/cm~2·s·cmHg,do_2/N_2≥2.0。     

端环氧基聚硅氧烷对环氧模塑料的改性

引入端环氧基聚硅氧烷对环氧封装材料的低应力化作用，将聚硅氧烷直接与环氧树脂及固化剂共混，由于聚硅氧烷不能完全键事到脂基体上，模塑料出现表面渗油，将端环氧基聚二甲基硅氧烷首先与不环氧树脂首先与环氧树脂的固化剂－酚醛树脂预反应形成嵌段共聚物，然后再与环氧树脂混合，解决了渗油，使聚硅氧烷在环氧树脂中的分布更均匀，相区尺寸更小，在环氧树脂固化物中，聚硅氧烷微区尺寸依赖于预反应条件、聚硅氧烷嵌段链长和聚硅氧     

基于硅烷基醚的动态共价聚合物网络

正含硅氧键的材料非常广泛,从柔软的聚二甲基硅氧烷橡胶到坚硬的玻璃。加州大学的Guan等发现邻近引入氨基可提高硅烷基醚交换速率三个数量级,而且这一可逆动态性质具有较高的热稳定性。通过将这种硅烷基醚作为交联点应用到共价交联聚合物网络中,得到的动态共价聚合物网络显示出延展性和再加工性。硅烷基醚的可调节动态性质及高热稳定性为这类材料的许多潜在应用开辟了新途径。     

线型聚芳醚砜-聚醚氨酯嵌段共聚物的合成及其结构性能的初步探讨

<正> 具有抗凝血性和其它一些特殊性能的聚醚氨酯嵌段聚合物,最近颇受注视。本文以异氰酸酯的氢转移加成聚合反应为主的合成方法,在聚合物的主链中引入具有一定结构的其它链段组份,合成了一类新的线型聚芳醚砜-聚醚氨酯嵌段共聚物。并就其结构与性能的关系进行了初步探讨。     

两亲性PS-b-PEG嵌段共聚物刷的合成及响应行为

利用原子转移自由基聚合(ATRP)和点击化学(Click)反应, 在硅基底上制备了聚苯乙烯-b-聚乙二醇(PS-b-PEG)两亲性嵌段共聚物刷. 首先, 利用ATRP方法在表面改性的硅片引发苯乙烯单体(St)的聚合, 得到PS-Br均聚刷, 然后通过叠氮化钠(NaN₃)将均聚刷末端功能化为PS-N₃, 再与炔基聚乙二醇甲醚(Alkynyl-PEG)发生Click反应, 得到PS-b-PEG嵌段共聚物刷. 通过X射线光电子能谱(XPS)和接触角测量仪表征了聚合物刷的表面化学组成和表面亲疏水性质, 证明在硅基底上接枝了嵌段共聚物刷. 用原子力显微镜(AFM)观察了PS-b-PEG嵌段共聚物刷在不同溶剂处理后的形态结构变化, 研究了其响应行为.     

聚己内酯/聚缩水甘油醚两亲性超枝状大分子的合成及表征

通过简单的两步反应, 合成出新型超枝状聚己内酯/聚缩水甘油醚嵌段共聚物. 以月桂醇为引发剂, 通过开环聚合反应合成羟基封端的聚己内酯; 将聚己内酯进一步和萘钾反应, 得到基于己内酯的大分子引发剂; 引发缩水甘油醚的聚合, 最终形成聚己内酯/聚缩水甘油醚嵌段共聚物. 通过核磁共振氢谱、红外光谱和葡聚糖凝胶色谱对聚合物进行定性表征. 结果表明, 所得到的聚合物既具有聚己内酯的特征峰, 又有聚缩水甘油醚的特征峰, 通过核磁共振氢谱计算出二者在嵌段共聚物中的比例. 在这些聚合物骨架上存在大量的羟基末端基团, 葡聚糖凝胶色谱表征得到单峰, 进一步证明聚合物为嵌段共聚物. 相对于单纯的聚己内酯, 这种聚合物结构的突出优势在于其具有大量可修饰的高活性端基基团, 通过对端基基团的后修饰, 可实现各类配体及多种药物的偶联, 使这种新型材料有可能应用于多功能靶向药物传递.     

含有机硅三元多嵌段共聚物的研究──Ⅲ．不同硬段、半硬段对含有机硅三元多嵌段共聚物性能的影响

以双酚Ａ聚砜或酚酞作为硬段，聚对羟基苯乙烯、酚醛、聚羟基醚或聚羟基醚砜作为半硬段，聚二甲基硅氧烷作为软段合成了七种三元多嵌段共聚物，并对其稳定性、动态力学性能进行了比较详细的研究。结果表明这类共聚物在溶液中的稳定性及热稳定性主要与半硬段有关；它们的形态结构同属于微相分离，并在很宽的温度范围内表现出优良的弹性体性质。三元多嵌段共聚物中硬段与半硬段的相容性直接影响其力学性能，当两者的相容性好时，其强度高于对应的二元多嵌段共聚物。     

ATRP和点击化学结合法制备PDMAAm—PDMS—PDMAAm嵌段聚合物

采用原子转移自由基聚合（ATRP）法制得了端基分别为烯丙基和溴原子的聚二甲基丙烯酰胺（PDMAAm），经叠氮基亲核取代后与端炔基聚二甲基硅氧烷进行点击反应，得到两亲三嵌段聚合物。利用^1HNMR、FTIR、GPC等测试方法对聚合物的结构进行了表征。结果表明：采用ATRP法合成的PDMAAm均聚物分子量分布较窄，通过点击化学法将热力学不相容的亲水性PDMAAm链段及疏水性聚二甲基硅氧烷（PDMS）链段制备PDMAAmPDMS—PDMAAm嵌段聚合物，是一种高效易行的方法。     

酚酞醚砜和酰胺-酰亚胺型多嵌段聚合物

<正> 本工作合成了端羟基酚酞醚砜低聚体(H_4(i))和端羧基酰胺酰亚胺低聚体(AI_i),探索了它们与端异氰酸酯基聚氧化丙烯(I-POP-I)、端异氰酸酯基聚氧化丙烯-二甲基硅氧烷三嵌段预聚物间的多嵌段聚合反应,并对制得的低聚体和多嵌段聚合物做了初步的形态结构表征。     

新型含有机硅二元多嵌段共聚物的研究

报道了聚羟基醚（ＰＨＥ）、聚羟基醚砜（ＰＨＥＳ）、酚酞聚羟基醚（ＰＰＨＥ）和聚对羟基苯乙烯（ＰＨＳ）与端胺基聚二甲基硅氧烷（ＰＤＭＳ）通过羟胺缩合生成ＡＢｍｎ新型结构的可溶性含有机硅二元多嵌段共聚物，ｍ值在１～６之间，详细讨论了反应物浓度对共缩聚反应的影响，并通过分子量测定、红外光谱分析和动态力学分析（ＤＭＡ）技术初步确定了其反应机理、结构和动态力学性能．     

Perfectly alternating segmented polyimide-polydimethyl siloxane copolymers via transimidization

New strategies for the synthesis of perfectly alternating segmented polyimide-polydimethyl siloxane copolymers were developed by utilizing a transimidization method. Imide oligomers endcapped with 2-aminopyrimidine were reacted with aminopropyl terminated (dimethyl siloxane) oligomers to afford perfectly alternating segmented imide siloxane copolymers. The polymerization was conducted in solvents such as chlorobenzene and chlorofrom. High molecular weight, fully imidized perfectly alternating segmented imide siloxane copolymers were obtained within 2 h at temperatures of 60-110°C. The mechanism of the reaction was further elucidated via model compounds and NMR characterization. The block copolymers exhibited two T_gs due to the microphase separation of the polyimide and polysiloxane phases. The T_g of the polyimide phase was a function of the length of the polyimide block. However, partial phase mixing was also evident from the DSC results on the imide siloxane copolymers prepared with low molecular weight polyimide segments. Thermooxidative stability and tensile properties of the perfectly alternating segmented imide siloxane copolymers were found to be principally dependent on the amount of poly (dimethyl siloxane) incorporated in the copolymer and did not correlate with the poly (dimethyl siloxane) or polyimide block lengths. The stress-strain behavior of both solvent cast films or molded films is also reported. © 1994 John Wiley & Sons, Inc.     

[-PPO-PDMS-PHS-]n三元多嵌段共聚物的形态结构和性能

利用DMA, TEM和SAXS对以聚苯醚(PPO)为硬段、聚对羟基苯乙烯(PHS)为半硬段和聚二甲基硅氧烷(PDMS)为软段的三元多嵌段共聚物[-PPO-PDMS-PHS-]n以三种嵌段相容相为连续相, PPO与PHS的相容相和PDMS相为两种分散相, 其tan δ随温度变化曲线在-100℃至200℃一直是一很高的平台, 并具有优异的力学性能, 较好地解决了含有机硅类嵌段共聚物强度低的弱点, 同时又保留了嵌段共聚物微相分离的特性。     

Segmented polyurethanes derived from novel siloxane–carbonate soft segments for biomedical applications

A novel macrodiol based on mixed silicone and carbonate chemistries was synthesized and used as a soft segment precursor in the synthesis of two series of segmented polyurethane (PU) copolymers varying in hard segment content and soft segment molecular weight. The hard segments in these copolymers were derived from 4,4‐methylene diphenyl diisocyanate and 1,4‐butane diol. The phase transitions, microphase separation behavior, and mechanical properties of the copolymers were investigated using a variety of experimental methods. When compared with segmented PU copolymers having predominately poly(dimethyl siloxane) soft segments, these siloxane–carbonate soft segment copolymers exhibit enhanced intersegment mixing, and consequently relatively low mechanical modulus. With relatively low modulus and siloxane units in the soft phase, the siloxane–carbonate PUs have potential for use in cardiac and orthopedic biomedical applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

聚醚型多嵌段共聚物软链段结晶特性的研究

本文使用虹外光谱及膨胀计等方法,对聚四亚甲基醚二醇类多嵌段共聚物的软链段结晶性进行了研究。在聚醚-聚酯多嵌段共聚物中(PTMEG>60％),其软链段结晶的熔点和结晶速率均随PTMEG含量减少而下降。而在聚醚-聚脲胺酯多嵌段共聚物中,由于N—H和C—O—C之间氢键的作用,即使在低温下,其软链段也难于结晶。此外,高倍拉伸会提高上述二类多嵌段共聚物中软链段结晶的熔点和结晶速率。     

Self-assembly of amphiphilic ABC star triblock copolymers and their blends with AB diblock copolymers in solution: self-consistent field theory simulations

The self-assembled morphologies of amphiphilic ABC star triblock copolymers consisting of hydrophilic A blocks and hydrophobic B and C blocks and the blends with their counterpart linear AB diblock copolymers in solution are investigated by 2D real-space implementation of self-consistent field theory (SCFT) simulation. The star triblock copolymers self-assemble in solution to form various micellar structures from hamburger, to segmented wormlike, to toroidal segmented micelles, and finally to vesicles with simultaneously increasing hydrophobic lengths of blocks B and C. When the length of hydrophobic blocks B and C is asymmetric, specific bead-on-string worm micelles are found. Particularly, when the star ABC triblock copolymer is in a strong segregation regime and both B and C blocks are strongly hydrophobic, quite long segmented wormlike micelles are obtained, which had not been found in previously investigated diblock and linear ABC triblock copolymers solution. Additionally, raspberry micelles with beads dispersed on the core also occur in the strong segregation regime of bulk star ABC triblock copolymers. Furthermore, the aggregate morphology of ABC star triblock copolymers is strongly influenced by the addition of linear AB diblock copolymers. The most significant feature is that the long segmented worms will become shorter, to form hamburger micelles with the addition of AB diblock copolymers. These simulations are in good agreement with the experimental findings by Lodge's group.     

Dissipative Particle Dynamics Simulations on the Self-Assembly of New Segmented Random-Block Copolymers in Selective Solvents

Dissipative particle dynamics simulation was applied to investigate the self-assembly of new segmented random-block copolymers (A-co-B)-b-B in selective solvents. The coarse-grained models of random-block copolymers were built. The effects of the composition of the copolymer, the interaction parameters, the volume fractions, as well as the ratio of hydrophilic particles to hydrophobic particles in the random segment, on the morphology of the aggregations were systematically investigated. The results showed that new segmented random-block copolymers (A-co-B)-b-B could self-assemble into rodlike micelle, spherical micelle and two-compartment micelle. Oval-shaped micelle and spherical micelle could be formed at different volume fractions. The simulation results provide an important reference to the design and synthesis of specific micelles.     

多嵌段共聚物分子的组成不均一性

从不同结构层次角度说明了多嵌段共聚物的分子组成不均一性。提出了一种新的看法,即在讨论多嵌段共聚物的形态和性能时,除了链段间的微相分离外,还必须首先考虑不同平均链段长度的多嵌段大分子间的宏观相分离作用。如何表征与控制其组成不均一性是十分重要的课题。     

长软链段对苯二甲酸乙二酯-环氧乙烷多嵌段共聚物的组成不均一性研究

合成了不同软链段长度和不同硬链段含量的系列对苯二甲酸乙二酯－环氧乙烷(PET-PEO)多嵌段共聚物,用NMR质子港测定了硬链段含量,对部分溶于氯仿的PET－PEO多嵌段共聚物进行了分离,并分别测定其氯仿可溶物和不溶物的硬链段含量、熔融热谱和热结晶谱.揭示了PET－PEO多嵌段共聚物的组成不均一性及其对软镇段长度和硬链段含量的依赖性,进而用DSC热谱证明了软链段和硬链段的结晶能力与PET－PEO多嵌段共聚物组成不均一性密切相关.