Simultaneous Determination of Nickel and cobalt in Manganese Sulphate Electrolyte by DMGH2-Sensitized Differential Pulse Polarography

Abstract

A method is described for the simultaneous determination of nickel and cobalt in manganese sulphate electrolyte by the dimethylglyoxime (DMGH₂) sensitized differential pulse polarography. The high manganese sulphate background (1.2M) in the concentrated process plant electrolyte interferes only with the nickel determination and precludes its direct determination. A 50% v/v dilution and an excessive amount (2 × 10^?3M) of the chelating agent are required at pH7.7 for the reliable determination of both elements. Under these conditions, the linear concentration ranges are 0-110 μg/1 for nickel and 0-140 μg/1 for cobalt. The minimum detectable amounts above the levels present in the process plant electrolyte are 2 μg/1 and 1 μg/1 for both elements, respectively. The relative standard deviations for all measurements are between 1 and 3%.     

Electrothermal Atomic Absorption Spectrometric Determination of Cobalt,Copper and Nickel in Fresh Water After Their Preconcentration by Precipitate Flotation

Abstract

A method is developed for simultaneous separation and determination of μg/L levels of Co(II), Cu(II) and Ni(II) in fresh water by precipitate flotation. The optimal conditions of the experimental procedure with hydrated iron(III) oxide and iron(III) tetramethylenedithiocarbamate as collectors were investigated. The pH interval of the working medium, within which Co(II), Cu(II) and Ni(II) can be successfully separated, was determined from the aspect of collectors and surfactant stability. The amounts of the elements investigated were determined by electrothermal atomic absorption spectrometry. The detection limit of the method is 0.15 μg/L for cobalt, 0.03 μg/L for copper and 0.79 μg/L for nickel.     

Simultaneous Preconcentration of Copper,Nickel and Cobalt In Water By Coprecipitation-Flotation For Electrothermal Atomic Absorption Spectrometry

Abstract

A method is described for the simultaneous flotation separation and determination of μg-levels of copper (II), nickel (II) and cobalt (II) in water. Copper, nickel and cobalt in a 1000-ml sample of water are coprecipitated with hydrated zirconium oxide at pH 9.1±0.1. The precipitate is floated with the aid of a surfactant solution and small air bubbles, separated and dissolved in dilute hydrochloric acid. The contents of these elements are determined by electrothermal atomic absorption spectrophotometry. The method is applied to the determination of low μg/1 levels of copper, nickel and cobalt in fresh water.     

铋膜电极方波吸附溶出伏安法测定纺织品中痕量钴和镍

本文建立了在铋膜修饰电极上采用方波吸附溶出伏安法同时测定纺织品中痕量Co2+和Ni2+的方法.以NH3-NH4Cl作为缓冲液,在丁二酮肟浓度为10 μmol/L的体系中,Co2和Ni2+的还原峰电位分别为-1.13 V和-1.03 V.当缓冲溶液pH为9.2,富集电位为-0.7V,富集时间为200 s时,C02 +和Ni2+在0.5～50 μg/L范围呈现良好的线性关系,相关系数R2＞0.99,其检出限分别为0.79 μg/L和0.96 μg/L,其它金属离子的干扰较小.采用标准加入法测定纺织品中Co>和Ni2+,回收率在94.88％～104.14％之间.     

Determinations of Some Trace Metals in Dialysis Solutions by Atomic Absorption Spectrometry After Preconcentration

Abstract

A method is presented for the determination of copper, lead, iron, cadmium, cobalt and nickel in dialysis solution at μg/1 level by atomic absorption spectrometry after preconcentration. The preconcentration is based on chelate formation of the investigated metals with ammonium pyrrolydine dithiocarbamate and on retention of the chelates on Amberlite XAD-4 in a short column. The relative standard deviations for the determinations were found to be lower than 0.08.     

Assessment of differential-pulse adsorption voltammetry for the simultaneous determination of nickel and cobalt in biological materials

An assessment of the voltammetric method based on chelate adsorption at the hanging mercury drop electrode is described for the simultaneous determination of nickel and cobalt in biological materials. The interfacial accumulation of the elements as metal dimethylglyoximates during the adsorption step, and the use of differential-pulse voltammetry during the reduction step, provide substantial gains in the sensitivity of their voltammetric responses. The decomposition of the sample material by direct dry ashing provides a blank-free approach for the accurate determination of the elements. Application of the method to the available certified biological reference materials for cobalt and nickel was successful. The limits of detection obtained under the conditions of this study were 0.01 μg g^?1 and 0.02 μg g^?1 for cobalt and nickel, respectively, in bovine liver.     

Simultaneous extraction of trace amounts of cobalt, nickel and copper ions using magnetic iron oxide nanoparticles without chelating agent

The present study investigates the application of Fe₃O₄ nanoparticles as an adsorbent for solid phase extraction and their subsequent determination of trace amounts of cobalt, nickel and copper from environmental water samples using flame atomic absorption spectrometry. The analyte ions were adsorbed on magnetic nanoparticles in the pH range of 10–12 and then, Fe₃O₄ nanoparticles were easily separated from the aqueous solution by applying an external magnetic field and decantation. Hence, no filtration or centrifugation was needed. After extraction and collection of magnetic nanoparticles, the analyte ions were desorbed using 1.0 M HNO₃. Several factors that may affect the preconcentration and extraction process, including pH, type and volume of eluent, sample volume, salt effect and matrix effect were optimized. Under the optimized conditions, linearity was maintained from 0.005–3.0 μg/mL for cobalt and nickel and 0.001 to 1.25 μg/mL for copper in the initial solution. The detection limits of this method for cobalt, nickel and copper ions were 0.9, 0.7 and 0.3 ng/mL, respectively. Finally, the method was successfully applied to the extraction and determination of the analyte ions in natural waters and reference plant samples.     

Study on Determination of Six Transition Metal Ions in Biological Samples by SPE and RP‐HPLC

This paper reports the utilization of solid phase extraction and the reversed‐phase high‐performance liquid chromatography (RP‐HPLC) for the determination of six transition metal ions (iron, cobalt, nickel, copper, zinc and manganese) in biological samples. The samples were digested by microwave digestion. The iron, cobalt, nickel, copper, zinc and manganese ions in the digested samples can react with 2‐(2‐quinolinylazo)‐5‐diethylaminophenol (QADEAP) to form colored chelates in pH 4.0 acetic acid‐sodium acetic buffer solutions and cetyl trimethylammonium bromide (CTMAB) medium. These chelates were enriched by solid phase extraction with C₁₈ cartridge. Then the chelates were separated on a Waters Nova‐Pak‐C₁₈ column (3.9 × 150 mm, 5 μm) by gradient elution with methanol (containing 0.5% of acetic acid and 0.1% of CTMAB) and 0.05 mol/L pH 4.0 acetic acid‐sodium acetic buffer solution (containing 0.1% of CTMAB) as mobile phase at a flow rate of 0.5 mL/min. The detection limits of iron, cobalt, nickel, copper, zinc and manganese are 3 ng/L, 4 ng/L, 2 ng/L, 4 ng/L, 8 ng/L, 10 ng/L, respectively. This method was applied to the determination of iron, cobalt, nickel, copper, zinc and manganese in biological samples with good results.     

Bismuth film electrode for simultaneous adsorptive stripping analysis of trace cobalt and nickel using constant current chronopotentiometric and voltammetric protocol

Bismuth film electrode (BiFE) is presented as a promising alternative to mercury electrodes for the simultaneous determination of trace cobalt and nickel in non-deoxygenated solutions. The preplated BiFE was employed under adsorptive stripping constant current chronopotentiometric and adsorptive stripping voltammetric conditions in the presence of dimethylglyoxime complexing agent. BiFE exhibited well-defined and undistorted signals with favorable overall resolution for cobalt and nickel cations, with the signals for both metal cations being practically independent of each other. The stripping performance of BiFE is characterized by good reproducibility (RSD 1.4% for Co(II), and 4.3% for Ni(II)), low detection limits of 0.08 μg l⁻¹ for Co(II) and 0.26 μg l⁻¹ for Ni(II) employing a deposition time of 60 s, in addition to good linearity. The non-toxic character of bismuth imparts the possibility of tailoring disposable and one-shot electrochemical sensors for decentralized environmental, clinical and industrial monitoring of trace cobalt and nickel.     

Determination of cobalt in nickel in the sub-ppm level with cold neutrons

The determination of cobalt in nickel with neutron activation analysis (NAA) is hindered by an interfering nuclear reaction induced by fast neutrons. To overcome this obstacle cold neutron beam irradiation has been carried out. As a result, a cobalt concentration of 0.25±0.02 μg/g in nickel foil has been determined. This nickel foil is intended to become a reference material for neutron dosimetry.     

Stepwise injection photometric determination of nickel in air aerosols

A procedure is developed for the automated determination of nickel in air aerosols; it involves the adhesive separation of aerosols on a fiberglass column in the on-site mode followed by the photometric determination of analytes with dimethyl glyoxime under the conditions of stepwise injection analysis of aerosol concentrates. The analytical range for nickel is 1.5–38 μg/m³; the detection limit of the method is 0.5 μg/m³ at an air sample volume of 30 L. The duration of sampling to an adhesive column and concentrate analysis were 15 and 10 min, respectively.     

Synthesis and structural characterization of new trinuclear cobalt(II) and nickel(II) complexes possessing five- and six-coordinated geometry

Tri-nuclear cobalt and nickel complexes ([(CoL)₂(OAc)₂Co]?·?THF (I) and [(NiL)₂(OAc)₂(THF)₂Ni]?·?THF (II)) have been synthesized by reaction of a new Salen-type bisoxime chelating ligand of 2,2′-[ethylenedioxybis(nitrilomethylidyne)]dinaphthol(H₂L) with cobalt(II) acetate tetrahydrate or nickel(II) acetate tetrahydrate, respectively. Complexes I and II were characterized by elemental analyses, IR, TG-DTA and ¹H-NMR etc. The X-ray crystal structures of I and II reveal that two acetate ions coordinate to three cobalt or nickel ions through M–O–C–O–M (M?=?Co or Ni) bridges and four μ-naphthoxo oxygen atoms from two [ML] units also coordinate to cobalt(II) or nickel(II). Complex I has two distorted square-pyramidal coordination spheres and an octahedral geometry around Co1. In complex II all three nickel ions are six-coordinate.     

Extraction-polarographic determination of cobalt(II) and nickel(II) as 2,2′-bipyridine complexes in acetonitrile

The tris(2,2′-bipyridine)cobalt(II) complex gives a reversible d.c. wave with E$\text{1}\text{2}$ = ?1.02 V vs. SCE and a sharp differential pulse peak at E_p = ?1.03 V in a salted-out acetonitrile phase. A simple selective method is described for the determination of cobalt(II); down to 0.25 μg of cobalt(II) can be determined in presence of large amounts of Ni, Zn, Cd, Pb, and Cu; iron(III) can be masked with sodium fluoride. The method is applicable to the determination of >0.0l% cobalt in nickel salts and >5 × 10^?5% cobalt in iron salts. Nickel(II) can also be extracted from aqueous solution and determined by differential pulse polarography, even in presence of a 20-fold amount of cobalt(II) by masking with EDTA; >0.01% of nickel in cobalt salts can be determined reproducibly.     

The Spectrophotometric Determination of Nickel and Cobalt in Mixtures with Picolinaldehyde 4-Phenyl-3-Thiosemicarbazone

Abstract

The properties of nickel complex of picolinaldehyde 4-pheny1-3-thiosanicarbazone are described. The optimal conditions for a selective and sensitive spectrophotometric determination of nickel are discussed, A photometric method for the determination of traces of cobalt(II) and nickel(II) ions in mixtures has also been developed.     

Bis-cyclohexanone-oxalyldihydrazone as a spectrophotometric reagent for cobalt and nickel

Cobalt and nickel ions form yellow complexes with bis-cyclohexanone-oxalyldihydrazone in alkaline solutions. These complexes have maximum absorbances at 292 μg and 330 μg, respectively. The cobalt complex obeys Beer's law from 10^-4 to 5.10^-3 mg cobalt per ml and the molar extinction coefficient is 6500. The nickel complex obeys Beer's law from 10^-4 to 7.10^-3 rng nickel per ml and the molar extinction coefficient is 8750. Cobalt and copper or nickel and copper can be determined in presence of each other.     

Spectrophotometric determination of cobalt(II) based on the ion-pair of tetrathiocyanatocobaltate(II) with neotetrazolium chloride

The ion-pair formed between tetrathiocyanatocobaltate(II) and [3,3′-(4,4′- biphenylene)bis(2,5-diphenyl)]-2H-tetrazolium chloride (neotetrazolium chloride) can be extracted into 4-methylpentan-2-one and used for the spectrophotometric determination of cobalt (2.5–9.8 μg ml^?1) at pH 3.5–5.0. The Sandell sensitivity of the method is 0.02 μg Co cm^?2. With suitabte masking, the method is quite selective and is applicable to nickel wire alloys.     

Thiothenoyltrifluoroacetone as the Extracting and Colorimetric Reagent for Bismuth

Abstract

Thiothenoyltrifluoracetone (STTA) was used for the simultaneous extraction and direct spectrophotometric determination of bismuth at microgram concentration. About 98.5 μg of bismuth was extracted as the orange-red colored complex with 10 ml of 0.001 M STTA in carbontetrachloride. The extraction was quantitative at pH 6. The system conformed to Beer's Law in the concentration range of 2.5 to 30 μg/ml of bismuth at 460 nm. The method is both sensitive and selective.

The molar absorptivity was 5.6 × 10³ and sensitivity was 0.037 μg/cm². The method is selective as it is possible to accomplish extraction and colorimetrically determination of bismuth in the presence of 1:50 of several ions. Only ions such as cadmium, tin, iron, titanium and nickel interfere seriously. The overall process of extraction and determination takes hardly 30 minutes. The method is reproducible.     

Anodic Stripping Potentiometric Determination of Cu,Pb, Cd and Zn In Natural Waters on a Novel Combined Electrode System

Abstract

A method is described for the reliable determination of copper, lead, cadmium and zinc in natural waters by anodic stripping potentiometry with the use of a novel combined electrode. The method involves two stripping cycles during which copper is initially determined on its own, followed by simultaneous determination of lead, cadmium and zinc after addition of gallium (III) ions. The optimum conditions include 0.01 M HCl as supporting electrolyte, 10 mg/L Hg (II) as chemical oxidant; E_dep(Cu) -700 mV vs Ag/AgCl; E_{dep(Pb,Cd,Zn)} -1200 mV vs Ag/AgCl; t_dep 10s; 150 μg/L Ga (III); sample rotation rate 5 and rest period 30s. Under these conditions, as low as 0.06 μg/L Cu (0.7% RSD); 0.2 μg/L Pb (13% RSD); 0.04 μg/L Cd (7.8% RSD) and 0.06 μg/L Zn (5.5% RSD) can be determined reliably. A linear concentration range of 0–110 μg/L was obtained for the four metals. The successful application of the method to reference fresh water, creek water and tap water is demonstrated.     

Cobalt Trace Determination: A Photometric Method Employing Photochemically Generated Anti-2-Thiophenaldehyde 2-Pyridylhydrazone

Abstract

An improved and sensitive photometric determination of cobalt based on the formation of a coloured chelate with photochemically generated anti-2-thiophenaldehyde 2-pyridylhydrazone (anti-TAPH) is described. The calibration graph is linear over the range 0.017–0.8 μg/ml. A detection limit of 4 ng/ml and r.s.d. of 0.76% was found. Colour development is instantaneous and remains stable for at least 4 hours. The corrected stoichiometry of the chelate was found to be 3:1 (L:M) when the syn-anti ratio at the photostationary state was considered. The influence of reaction variables and the effect of foreign ions are also discussed.     

Simultaneous spectrophotometric determination of cobalt,copper and nickel using 1-（2-thiazolylazo）-2-naphthol by chemometrics methods

The simultaneous determination of cobalt, copper and nickel using 1-（2-thiazolylazo）-2-naphthol （first figure of this article） by spectrophotometric method is a difficult problem in analytical chemistry, due to spectral interferences. By multivariate calibration methods, such as partial least squares （PLS） regression, it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. Orthogonal signal correction （OSC） is a preprocessing technique used for removing the information unrelated to the target variables based on constrained principal component analysis. OSC is a suitable preprocessing method for PLS calibration of mixtures without loss of prediction capacity using spectrophotometric method. In this study, the calibration model is based on absorption spectra in the 550-750-nm range for 21 different mixtures of cobalt, copper and nickel. Calibration matrices were formed from samples containing 0.05-1.05, 0.05-1.30 and 0.05-0.80 μg·mL^-1 for cobalt, copper and nickel, respectively. The root mean square error of prediction （RMSEP） for cobalt, copper and nickel with OSC and without OSC were 0.007, 0.008, 0.011 and 0.031,0.037, 0.032 μg· mL^-1, respectively. This procedure allows the simultaneous determination of cobalt, copper and nickel in synthetic and real samples and good reliability of the determination was proved.