Determination of traces of fluorine or sulfur by x-ray analysis

New X-ray methods have been developed for the determination of as little as 1 μg of fluorine or as little as 0.1 μg of sulfur. Fluorine as fluoride is precipitated as lanthanum fluoride in 75% ethanol-water mixture and determined by measuring the amount of lanthanum present in the precipitate. Sulfur as sulfate is precipitated as barium sulfate from a barium sulfate saturated 50% ethanol-buffer mixture, using selenate as a coprecipitant, and determined by measuring the amount of sulfur present. Sulfur as sulfide is precipitated as cadmium sulfide and determined by measuring the amount of sulfur or cadmium in the precipitate.     

Dithiocarbamates as Precursors in Organic Chemistry; Synthesis and Uses

Abstract

Organic dithiocarbamates have received great attention due to their interesting chemistry and wide utility as radical precursors and intermediates in organic synthesis. They also have found many of applications, that is, in agriculture and medicine. They are in use as pesticides, as well as in the rubber industries as vulcanization accelerators; and as antioxidants. Because they exhibit strong metal-binding capacity, they can act as in inhibitors of enzymes and have a profound effect on biological systems. Moreover, they have found application in the treatment of cancer and HIV.     

Controlled release of volatiles under mild reaction conditions: from nature to everyday products

Volatile organic compounds serve in nature as semiochemicals for communication between species, and are often used as flavors and fragrances in our everyday life. The quite limited longevity of olfactive perception has led to the development of pro-perfumes or pro-fragrances--ideally nonvolatile and odorless fragrance precursors which release the active volatiles by bond cleavage. Only a limited amount of reaction conditions, such as hydrolysis, temperature changes, as well as the action of light, oxygen, enzymes, or microorganisms, can be used to liberate the many different chemical functionalities. This Review describes the controlled chemical release of fragrances and discusses additional challenges such as precursor stability during product storage as well as some aspects concerning toxicity and biodegradability. As the same systems can be applied in different areas of research, the scope of this Review covers fragrance delivery as well as the controlled release of volatiles in general.     

Asymmetric multicomponent reactions (AMCRs): the new frontier

Asymmetric multicomponent reactions involve the preparation of chiral compounds by the reaction of three or more reagents added simultaneously. This kind of addition and reaction has some advantages over classic divergent reaction strategies, such as lower costs, time, and energy, as well as environmentally friendlier aspects. All these advantages, together with the high level of stereoselectivity attained in some of these reactions, will force chemists in industry as in academia to adopt this new strategy of synthesis, or at least to consider it as a viable option. The positive aspects as well as the drawbacks of this strategy are discussed in this Review.     

Recent Progress toward white organic light emitting diodes

An efficient and stable white organic light emitting diode (WOLED) is highly desirable in potential applications such as lighting, background light source, and full color display.A series of highly fluorescent dyes based on a dipyrazolopyridine skeleton,1,7-diphenyl-l,7-dihydrodipyrazolo[3,4-b,4′,3′-e]pyridine, were synthesized and evaluated as emitting as well as charge-transporting material in the fabrication of electroluminescent devices.Several of the blue derivatives are found to be useful as the source of blue emission in fabricating bright white-emitting devices. The choice of dopants, cathode materials, electron-transporting materials as well as the device configurations greatly affect the emission profile, efficiencies, as well as the device lifetime. The latest progress in achieving a more efficient, color stable, durable white light device will be discussed.     

Application of INAA to the Examination of Art Objects: Research in Poland

Systematic studies on art objects using instrumental neutron activation analysis and neutron autoradiography have been carried out in the Institute of Nuclear Chemistry and Technology in collaboration with the Faculty of Art Conservation and Restoration of the Academy of Fine Arts in Cracow, as well as with other Academies of Fine Arts and museums in Poland. It was possible to accumulate a number of essential data on the concentration of trace elements particularly in chalk grounds and pigments (such as lead white, lead-tin yellow, smalt), Chinese porcelain, Thai ceramics, as well as in the clay fillings of sarcophagi of Egyptian mummies. The above mentioned examination of art objects prior to their conservation helps to determine precisely the materials used in the process of creating art objects, as well as to identify the approximate place of origin of particular materials.     

Macromolecular chemistry and medicine

Macromolecular substances are used in medicine both as materials and as reagents. In the former category polymers serve as replacements for soft tissue, as cardiovascular and orthopedic implants, and as adhesives. When employed as reagents, macromolecules interact with living tissue and play an active part in bodily repair processes.     

Experimental and theoretical challenges in the chemistry of noncovalent intermolecular interaction and clustering

The weak, noncovalent interactions among molecules at long range and as close as van der Waals contact form a crucial contemporary frontier for chemical physics, one with many challenges for experimental as well as theoretical investigation. Certain of these challenges have been met in the last two decades, but as recognition of the complexity of phenomena governed or affected by weak interaction has grown, new challenges have arisen. We discuss a number of these challenges in the context of recent developments and progress, highlighting both disparate objectives of theory and experiment in this area as well as their crucial interplay.     

Extraordinary atomic mobility of Au{111} at 80 Kelvin: effect of styrene adsorption

We describe how the presence of styrene, a weakly adsorbed molecule, dramatically restructures the Au{111} surface at temperatures as low as 80 K. The restructuring manifests itself both in mobility of step-edge atoms, as well as changes in the position of the herringbone reconstruction over time. These effects are explained in terms of the preferential adsorption sites of styrene allowing it to assist in atom detachment from step edges, as well as lowering of the energetic barrier for movement of the herringbone reconstruction. This work has important consequences for studies in which Au is used as a support for or as an electrical contact to molecules.     

Interactions and uses of antisense peptides in affinity technology.

Antisense peptides, amino acid sequences encoded in the antisense strand of DNA, can interact with significant affinity and selectivity with their corresponding sensepeptides. Experimentally, sense-antisense peptide recognition has been observed repeatedly. However, skepticism about the biological relevance of this phenomenon has persisted. This is due in part to the unexpected and somewhat couterintutive nature of the interaction as well as to its non-universality as an empirical observation. Nonetheless, antisense peptides in several cases investigated so far have been used as immobilized ligands for the successful affinity chromatographic separation of native (sense) peptides and proteins. For example, immobilized antisense peptides corresponding to Arg8-vasopressin (AVP) have been used to separate vasopressin from oxytocin chromatographically as well as to affinity capture AVP-receptor complex. These results, together with improved understanding of the general features of amino acid sequence which drive antisense-sense peptide interactions as well as new ideas for making antisense peptides chimeras, are beginning to suggest improved ways to make antisense-related peptides as affinity agents for separation as well as for other biotechnology applications.     

Ionic liquids and CE combination

This paper reviews and discusses the analytical combination of ionic liquids (IL) with CE. On the one hand, it shows CE as a powerful technique to separate impurities from IL as well as being capable to determine physical and chemical properties of IL. On the other hand, it also shows how IL are employed in CE separations to enhance resolution, peak efficiency and peak symmetry. Specifically, IL are used as additives in CZE, NACE, and MEKC and as support coatings of the capillary wall in electrochromatography. The integrity of the IL in the electrophoretic system as well as the roles of the cations and anions of the IL in the electrophoretic separation are also discussed.     

Advances and challenges of MOF derived carbon-based electrocatalysts and photocatalyst for water splitting: A review

Environmental pollution and energy shortage are substantial fears to the modern world's long-term sustainability. Water splitting is an essential technique for eco - friendly and sustainable energy storage, as well as a pollution-free method to produce hydrogen. In this regards Metal–organic frameworks have emerged as the most competent multifunctional materials in recent times, due to its large surface areas, adjustable permeability, easy compositional alteration, and capability for usage as precursors with a wide range of morphological forms. Further, MOF-derived carbon-based nanomaterials also offer significant benefits in terms of tunable morphological features and hierarchical permeability, as well as ease of functionalization, making them extremely effective as catalysts or catalysts supports for a wide variety of important reactions. Recent developments in carbon-based MOFs as catalysts for overall water splitting are discussed in this review. We explore how MOFs and carbon-based MOFs might well be beneficial, as well as which methods should be explored for future development. We divided our review into two sections: photocatalytic and electrocatalytic water splitting, and we gathered published literature on carbon-based MOFs materials for their outstanding activity, offers helpful methods for catalysts design and analysis, as well as difficulties This study highlights the developments in MOF derived materials as photo and electro catalysts by explaining respective approaches for their use in overall water splitting.     

Aptamers: molecular tools for analytical applications

Aptamers are artificial nucleic acid ligands, specifically generated against certain targets, such as amino acids, drugs, proteins or other molecules. In nature they exist as a nucleic acid based genetic regulatory element called a riboswitch. For generation of artificial ligands, they are isolated from combinatorial libraries of synthetic nucleic acid by exponential enrichment, via an in vitro iterative process of adsorption, recovery and reamplification known as systematic evolution of ligands by exponential enrichment (SELEX). Thanks to their unique characteristics and chemical structure, aptamers offer themselves as ideal candidates for use in analytical devices and techniques. Recent progress in the aptamer selection and incorporation of aptamers into molecular beacon structures will ensure the application of aptamers for functional and quantitative proteomics and high-throughput screening for drug discovery, as well as in various analytical applications. The properties of aptamers as well as recent developments in improved, time-efficient methods for their selection and stabilization are outlined. The use of these powerful molecular tools for analysis and the advantages they offer over existing affinity biocomponents are discussed. Finally the evolving use of aptamers in specific analytical applications such as chromatography, ELISA-type assays, biosensors and affinity PCR as well as current avenues of research and future perspectives conclude this review.     

Synthesis of 3D printing materials and their electrochemical applications

Three-dimensional (3D) printing, also known as additive manufacturing, has the advantages of low cost, easy structure operation, rapid prototyping, and easy customization. In the past few years, materials with different structures, compositions, and properties have been widely studied as prospects in the field of 3D printing. This paper reviews the synthesis methods and morphologies of one-, two- and three-dimensional micro/nano materials and their composites, as well as their applications in electrochemistry, such as supercapacitors, batteries and electrocatalysis. The latest progress and breakthroughs in the synthesis and application of different structural materials in 3D-printing materials, as well as the challenges and prospects of electrochemical applications, are discussed.     

Metal On‐Line Voltammetric Analyzer for On‐Site Monitoring of Iron Speciation in Acid Mine Drainage Waters: Development and Characterization

The development of a simple, low cost, portable metal on‐line voltammetric analyzer (MOVA) for the iron analysis, as well as other species, in mining effluents is presented. It consists of a voltammetric cell based on an impinging jet flow configuration, a fluidic system controlled by gravity and electronics. Laboratory tests were performed to optimize the system as well as the analytical conditions for Fe speciation measurements. MOVA was then tested in the laboratory, in samples of both mining effluents. The results showed that iron in both mining effluents, as well as copper and arsenic, can be measured in oxygenated samples.     

Determination of phosphonoformic acid in human plasma and urine by high-performance liquid chromatography with electrochemical detection

Trisodium phosphonoformate (foscarnet) is used in the treatment of cytomegalovirus infections in immunocompromised patients, such as bone marrow and renal transplant recipients, as well as patients with the acquired immune deficiency syndrome. A simple high-performance liquid chromatographic assay is described using an electrochemical detector. The method is accurate, precise and reproducible. Hydrochlorothiazide is used as the internal standard. This assay allows measurement of foscarnet in biological fluids at concentrations as low as 33 microM. This method is being used for the analysis of samples in clinical trials and is important in the evaluation of the pharmacokinetic disposition of the drug.     

Analytical devices based on light-emitting diodes – a review of the state-of-the-art

A general overview of the development of the uses of light-emitting diodes in analytical instrumentation is given. Fundamental aspects of light-emitting diodes, as far as relevant for this usage, are covered in the first part. The measurement of light intensity is also discussed, as this is an essential part of any device based on light-emitting diodes as well. In the second part, applications are discussed, which cover liquid and gas-phase absorbance measurements, flow-through detectors for chromatography and capillary electrophoresis, sensors, as well as some less often reported methods such as photoacoustic spectroscopy.     

Determination of Selenium Species in Environmental Samples

 The essential nature of selenium as well as its toxicity depend on the concentration and the chemical forms in which this element is present in a given sample. Dissolved inorganic selenium can be found in natural water and soil as selenides, selenite and selenate. Organoselenium compounds present in air, soil and plants are volatile methylselenides, trimethylselenonium ion and several selenoamino acids. This review is a summary of recent research on the determination of selenium species in environmental samples such as water, air, soil and plants. Stability of selenium species in solutions and their storage is also discussed. In the metabolic pathway in the body selenide could act as the common intermediate for inorganic and organic Se sources as well as the checkpoint between further utilisation and excretion of selenium. Received May 30, 2001; accepted October 19, 2001; published online July 15, 2002     

微波促进离子液体相反应在有机合成中的应用

微波促进离子液体相有机合成技术作为一种新型的绿色化学合成法,引起了人们极大的兴趣。在离子液体中,微波辅助下反应快速、收率高、选择性好、后处理简单,离子液体经简单再生后可多次套用。本文综述了以离子液体为反应介质或催化剂的微波辅助技术在多种类型有机反应中的研究成果,主要包括了环合反应、亲核取代反应、金属复分解反应、酰化反应、重排反应、聚合反应、偶联反应、氧化还原反应和选择性脱溴反应等。