Co2+、Zn2+、Cd2+的阴离子交换色谱法分离研究

本文对钴与锌、镉等金属离子的阴离子交换色谱法分离进行了研究．采用201×7型阴离子交换树脂经氧化铵溶液饱和后,在pH＝4．0时,使钴与其它金属离子分离,然后分别用0．02mol／L的盐酸溶液及蒸馏水将锌、镉等金属离子从阴离子交换树脂上洗脱．此法分离效果好,操作简单方便．     

交联壳聚糖对Zn2+的吸附性能

研究了甲醛、环氧氯丙烷交联壳聚糖树脂(AECTS)对Zn 2 的吸附行为,探讨温度、溶液的pH、反应时间、再生次数等因素对吸附性能的影响,并用红外光谱(FTIR)和光电子能谱(XPS)对吸附产物表面的元素结构及其结合能的变化进行表征. 结果表明,AECTS对Zn 2 的吸附导致AECTS结构和性能发生显著变化. FTIR和XPS分析表明,Zn 2 以配位键的形式吸附于AECTS,使AECTS中氨基的伸缩振动、变形振动发生了明显变化,N原子发生化学位移,而AECTS分子链上的羟基没有直接参与配位反应;AECTS对Zn 2 有较强的吸附能力和较快的吸附速率,在30 ℃、Zn 2 初始质量浓度为1 g/L的溶液中,吸附量可达163 mg/g树脂,是壳聚糖饱和吸附量的1.7倍左右;吸附量受pH的影响较大,在pH＝5时吸附量最高;AECTS对Zn 2 的吸附行为符合Freundlich等温吸附方程,温度升高吸附量增大,该过程为一吸热过程;AECTS经再生重复使用5次,吸附量基本不变.     

交联壳聚糖树脂与Zn2+的配位作用

研究了甲醛、环氧氯丙烷交联壳聚糖树脂(Chitosan crosslinked by aldehyde and epichlorohydrin,AECTS)吸附Zn2 后对树脂结构及性能所产生的影响.用FTIR、XRD、TG、DSC和SEM对吸附产物进行了结构表征,并分析了AECTS与Zn2 之间的作用机理.结果表明,Zn2 与AECTS中的氨基发生配位而被吸附;AECTS吸附Zn2 后,结晶度下降、总体上热稳定性变差;Zn2 对AECTS的主链分解具有明显的催化功能;Zn2 的配位使得AECTS的表面形态发生了改变.     

交联壳聚糖树脂与Zn2+的配位作用

研究了甲醛、环氧氯丙烷交联壳聚糖树脂(Chitosan crosslinked by aldehyde and epichlorohydrin,AECTS)吸附Zn2 后对树脂结构及性能所产生的影响.用FTIR、XRD、TG、DsC和SEM对吸附产物进行了结构表征,并深入分析了AECTS与Zn2 之间的作用机理.结果表明,Zn2 与AECTS中的氨基发生配位而被吸附;AECTS吸附Zn2 后,结晶度下降、总体上热稳定性变差:Zn2 对AECTS的主链分解具有明显的催化功能;Zn2 的配位使得AECTS的表面形态发生了改变.     

壳聚糖对Zn2+的吸附性能研究

本文用壳聚糖对Ｚｎ＾２＋的吸附条件进行了研究,探讨了脱乙酰度,分子量,粒度大小,溶液的ｐＨ值,温度,Ｚｎ＾２＋起始浓度和不同锌盐等方面对壳聚糖吸附性能的影响。结果表明：壳聚糖对Ｚｎ＾２＋的吸附具有Ｌａｎｇｍｕｉｒ吸附特征,其吸附最佳条件是壳聚糖脱乙酰度为１００％,锌盐为硫酸锌,Ｚｎ＾２＋溶液ｐＨ值为６．０,起始浓度４－５ｍｇ／ｍｌ。     

PEI/SiO2复合材料对Zn2+、Cd2+的螯合吸附性能研究

采用螯合电导滴定法研究了聚乙烯亚胺(PEI)与Zn2 、Cd2 的配合过程,提出了PEI与各种金属离子所形成螯合物的可能结构;通过γ-氯丙基三甲氧基硅烷媒介,将PEI偶联接枝在硅胶微粒表面,制备了复合型螯合吸附材料PEI/SiO2;研究了PEI/SiO2对Zn2 、Cd2 等重金属离子的吸附性能。结果表明,水溶性聚胺PEI与Zn2 、Cd2 等离子都能定量地形成四配位的水溶性螯合物,且配合过程速度较快;PEI/SiO2复合型螯合吸附材料对Zn2 、Cd2 都具有强的螯合吸附能力;等温吸附数据符合Langmuir方程,且吸附容量随温度升高而增大;pH对吸附过程有很大的影响,pH=7时,吸附容量最高。     

乙二胺硅胶复合材料对Zn2+的吸附特性

以γ-氯丙基三氯硅烷为偶联剂,将乙二胺偶合接枝在硅胶表面,合成对锌离子具有吸附作用的乙二胺硅胶复合材料（EDA/SiO2）,考察了Zn2+溶液pH值、初始浓度、吸附温度和吸附时间等因素对复合材料吸附性能的影响。 结果表明,在研究的溶液浓度及温度范围内,Zn2+溶液pH值对EDA/SiO2的吸附量影响显著,吸附的最佳pH值范围在3.0~5.5;Zn2+的吸附平衡数据符合Langmuir吸附模型,热力学数据显示,EDA/SiO2对Zn2+的吸附行为为一吸热且自发进行的过程,升高温度有利于吸附,并对此吸附行为作了解释;吸附动力学数据可用拟二级吸附动力学方程描述,得到的吸附速率常数与溶液初始浓度有关。     

红薯提取液荧光猝灭的Zn2+检测

人体大量摄入锌时易引起中毒,对锌污染的监测十分重要[1,2].锌离子的检测方法主要有电化学分析法[3-5]、光化学分析法[6,7]、原子吸收分光光度法[8]等.     

用双硫腙作为流动载体的乳状液膜迁移Pb2+、Zn2+、Cu2+的研究

乳状液膜分离技术已经在许多领域中应用,在液膜中加入流动载体,可促进物质的迁移.本文从萃取剂中筛选出来双硫腙,可作为铅、铜离子迁移的优良流动载体.用双硫腙-Span 80-甲苯的乳状液膜体系,在20～30min试验中,铅、铜的迁移率均接近100％,而在同样条件下,锌不迁移,因此,用该乳状液体系可分离铅、铜和锌.     

Metallothionein Zn2+- and Cu2+-clusters from first-principles calculations

Detailed electronic structures of Zn(II) and Cu(II) clusters from metallothioneins (MT) have been obtained using density functional theory (DFT), in order to investigate how oxidative stress-caused Cu(II) intermediates affect Zn-binding to MT and cooperatively lead to Cu(I)MT. The inferred accuracy is ～0.02-0.03 ? for metal-thiolate bond lengths for the models that are the most realistic MT models so far studied by DFT. We find terminal Zn-S and Cu-S bond lengths of 2.35-2.38 ? and 2.30-2.34 ?, whereas bridging M-S bonds are 0.05-0.11 ? longer. This electronic effect is also reflected in changes in electron density on bridging sulfurs. Various imposed backbone constraints quantify the sensitivity of cluster electronic structure towards protein conformational changes. The large negative charge densities of the clusters are central to MT function, and the smaller β-clusters are more prone to modification. Oxidative stress-associated Cu(II) binding weakens the Zn-S bonds and is thus likely to impair the Zn(II) transfer function of MTs, providing a mechanism for cooperative Cu(II) binding leading to loss of Zn(II) and dysfunctional Cu(I)MT clusters.     

Fluorogenic ferrocenyl Schiff base for Zn2+ and Cd2+ detection

Research on Chemical Intermediates - A novel sensor based on acetylferrocene-containing Schiff base (ASB) was synthesized by reaction of α-chloroacetylferrocene and...     

An excitation ratiometric Zn2+ sensor with mitochondria-targetability for monitoring of mitochondrial Zn2+ release upon different stimulations

A mitochondria-targeted fluorescent sensor (Mito-ST), constructed by integrating a sulfamoylbenzoxadiazole fluorophore with a phosphonium group, displays the specific Zn(2+)-induced hypsochromic shifts of both excitation (69 nm) and emission (35 nm) maxima. Its ratiometric Zn(2+) imaging ability via dual excitation mode has been applied in MCF-7 cells to clarify the different behaviours of mitochondrial Zn(2+) release stimulated by H(2)O(2) and SNOC.     

Zn2+-dependent peptide nucleic acids probes

Binding of bis-picolylamine-naphthalene diimide-peptide nucleic acid conjugates to complementary DNA is strongly dependent upon Zn2+; ultimately, hybridization is switched ON in the presence muM Zn2+.     

Coumarin-derived transformable fluorescent sensor for Zn2+

We report a coumarin-derived fluorescent sensor for Zn(2+) termed CTS. CTS shows excellent binding selectivity for Zn(2+) over competing metal ions due to the transformable ability of CTS, that is the displacement of other metal ions by Zn(2+), which induces transformation of chelation from an amide to an imidic acid tautomeric form.     

Adsorption of Co2+ and Zn2+ on cryptomelane-type hydrous managese dioxide

Co²⁺ and Zn²⁺ ions are adsorbed on cryptomelane-type MnO₂ by exchange with surface protons and with structural ions (probably K⁺ and/or Mn²⁺) in the oxide. The latter sites are responsible for the much higher capacity to these cations, compared to Na⁺. At all pH values, two straight lines expressing the presence of mainly two groups of sites with distinctly different adsorption energies are located in the Langmuir plots for both Co²⁺ and Zn²⁺. The apparent capacities of the two groups increase with the increase of pH, indicating the involvement of protons in the adsorption process over the whole concentration range. The higher Co²⁺ capacity at relatively low pH, compared to the Zn²⁺ capacity, is probably due to a more exchange with the structural ions. Crytomelane type MnO₂ seems to be a quite heterogenous ion adsorbent whose adsorption sites could be approximated to two groups only.     

Development and applications of fluorescent indicators for Mg2+ and Zn2+

In a study of the spectroscopic behavior of two Schiff base derivatives, salicylaldehyde salicylhydrazone (1) and salicylaldehyde benzoylhydrazone (2), Schiff base 1 has high selectivity for Zn(2+) ion not only in abiotic systems but also in living cells. The ion selectivity of 1 for Zn(2+) can be switched for Mg(2+) by swapping the solvent from ethanol-water to DMF (N,N-dimethylformamide)-water mixtures. Imine 2 is a good fluorescent probe for Zn(2+) in ethanol-water media. Many other ions tested, such as Li(+), Na(+), Al(3+), K(+), Ca(2+), Cr(3+), Mn(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Ag(+), Cd(2+), Sn(2+), Ba(2+), Hg(2+), and Pb(2+), failed to induce any spectral change in various solvents. The selectivity mechanism of 1 and 2 for metal ions is based on a combinational effect of proton transfer (ESPT), C═N isomerization, and chelation-enhanced fluorescence (CHEF). The coordination modes of the complexes were investigated.     

Studies on Synthetic Inorganic Ion Exchangers-III Quantitative Separations of Mg2+ -Pb2+, Zn2+ - Pb2+ Cu2+ - Pb2+, Al3+ - Pb2+, Zn2+ - Cd2+, and Mg2+ - Cd2+ on Lead Antimonate Columns

Abstract

A new inorganic ion exchanger, lead antimonate has been synthesized having an Pb:Sb ratio of 1:5 and cation exchange capacity of 1.46 mequiv./g. It is fairly stable in water and dilute solutions of acids, bases and salts. Ion distribution studies on twenty metal ions have been determined on this gel at pH 1,2,3 and 5. The following mixtures have been separated: Mg²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Cu²⁺ - Pb²⁺, Al³⁺ - Pb²⁺, Zn²⁺ - Cd²⁺ and Mg²⁺ - Cd²⁺. Mg²⁺ and Al³⁺ were removed with 0.4 M ammonium nitrate, Cu²⁺ and Zn²⁺ with 0.4 M ammonium nitrate + 0.1M nitric acid (1:1), Pb²⁺ with 0.5M nitric acid and Cd²⁺ with 0.25M nitric acid. A tentative structure of this material is proposed on the basis of chemical analysis, pH titrations, thermogravimetry and IR spectrophotometry.