Hamaker constants of iron oxide nanoparticles

The Hamaker constants for iron oxide nanoparticles in various media have been calculated using Lifshitz theory. Expressions for the dielectric responses of three iron oxide phases (magnetite, maghemite, and hematite) were derived from recently published optical data. The nonretarded Hamaker constants for the iron oxide nanoparticles interacting across water, A(1w1) = 33 - 39 zJ, correlate relatively well with previous reports, whereas the calculated values in nonpolar solvents (hexane and toluene), A(131) = 9 - 29 zJ, are much lower than the previous estimates, particularly for magnetite. The magnitude of van der Waals interactions varies significantly between the studied phases (magnetite < maghemite < hematite), which highlights the importance of a thorough characterization of the particles. The contribution of magnetic dispersion interactions for particle sizes in the superparamagnetic regime was found to be negligible. Previous conjectures related to colloidal stability and self-assembly have been revisited on the basis of the new Lifshitz values of the Hamaker constants.     

Spectroscopic Ellipsometry Characterisation and Estimation of the Hamaker Constant of Cellulose

Calculations of Hamaker constants using Lifshitz theory require the availability of accurate dielectric data, especially in the visible-ultraviolet region. We present spectroscopic ellipsometry data on well-defined cellulose films of a limited thickness range (100–140 layers) deposited on an oxidised and hydrophobised silicon substrate. The spectral data, representing measurements from a perpendicular orientation to the fibre deposition direction, was used for estimates of the necessary spectral parameters, i.e. the oscillator strengths and characteristic frequencies in the UV-range. Our calculations show that cellulose has a relatively low Hamaker constant in air (58 zJ) and water (8.0 zJ). The implications for the surface energy estimates of cellulose and colloidal interactions between cellulose and various types of fillers and coating colours are indicated.     

Controlled pinewood fractionation with supercritical ethanol: A prerequisite toward pinewood conversion into chemicals and biofuels

The objective of this work was to investigate the ability of supercritical (SC) ethanol conditions to attack preferentially the lignin fraction against the carbohydrate fraction and their effects on the product distribution among gases, light products, bio-oils, and chars. In this study, the conversion of each pinewood component was determined by the analysis of solid residues to quantify cellulose, hemicellulose, lignin, and char contents. It is shown that, by tuning the temperature, hemicellulose and lignin are already transformed in subcritical ethanol conditions, lignin being more reactive than hemicellulose. In contrast, native wood cellulose is recalcitrant to liquefaction in SC ethanol near the critical point (T_c = 241 °C and P_c = 61 bar), but 20% of native wood cellulose is converted in SC ethanol at 280 °C. Besides, the severity of the conditions, in terms of temperature and treatment time, does not significantly influence the yields of gases, light products, and bio-oils but strongly enhances char formation. Interestingly, the increase in SC ethanol density does not change the conversion of biomass components but has a marked effect on bio-oil yield and prevents char formation. The optimum fractionation conditions to convert the lignin component, while keeping unattacked the cellulose fraction with a minimum formation of char, are dense SC ethanol, at 250 °C for 1 h, in batch conditions. However, although lignin is more reactive than hemicellulose under these conditions, these fractions are converted, in a parallel way, to around 50% and 60%, respectively.     

Anisotropy of cell wall polymers in branches of hardwood and softwood: a polarized FTIR study

The mechanical and physical properties of wood fibres are dependent on the organisation of their constituent polymers (cellulose, hemicellulose and lignin). Fourier Transform Infrared (FTIR) microscopy was used to examine the anisotropy of the main wood polymers in isolated cell wall fragments from branches of maple and Serbian spruce. Polarised FTIR measurements indicated an anisotropy, i.e. orientation of the cellulose microfibrils that was more or less parallel to the longitudinal axis of the cell wall. The hemicelluloses, glucomannan and xylan appeared to have a close link to the orientation of the cellulose and, thus, an orientation more parallel to the axis of the cell wall. An important result is that, in both maple and spruce samples, lignin was found to be organised in a parallel way in relation to the longitudinal cell wall axis, as well as to the cellulose. The results show that, despite the different lignin precursors and the different types of hemicelluloses in these two kinds of wood, lignin has a similar orientation, when it comes to the longitudinal axis of the cell wall.     

Selective delignification of wood by white-rot fungi

The white-rot fungi,Cerrena unicolor, Ganoderma applanatum, G. tsugae,Ischnoderma resinosum, andPerenniporia medullapanis, caused two distinct types of decay. Large areas of decayed wood were selectively delignified and a typical white-rot causing a simultaneous removal of all cell wall components was present. Preferential lignin degradation was intermittently dispersed throughout the decayed wood. Scanning and transmission electron microscopy were used to identify the micromorphological and ultrastructural changes that occurred in the cells during degradation. In delignified areas the compound middle lamella was extensively degraded without substantial alteration of the secondary wall. The S₂ layer of the secondary wall was least affected. The loss of middle lamellae resulted in extensive defibration of the cells. Sulfuric acid lignin determinations indicated that 95–98% of the lignin was removed. Wood sugar analyses using high pressure liquid chromatography demonstrated that hemicelluloses were removed in preference to cellulose when lignin was degraded. The results suggest that a highly diffusible ligninolytic system was responsible for the selective degradation of the wood. In simultaneously white-rotted wood, all cell wall layers were progressively removed from the cell lumen toward the middle lamella, causing erosion troughs or holes to form. Large voids filled with fungal mycelia resulted from a coalition of degraded areas. Chemical analyses of white-rotted wood indicated lignin, cellulose, and hemicellulose were removed in approximately the same amounts. Degradation was confined to areas around fungal hyphae.     

The chemistry and kinetic behavior of Cu-Cr-As/B wood preservatives. I. Fixation of chromium on wood

The kinetic behavior of CrO₃ in its reaction with wood has been elucidated. Various reactions take place between CrO₃ and the lignin and cellulose in wood. CrO₃ reacts with cellulose in a two-step reaction: the first step is an adsorption of Cr^VI onto the cellulose to form Cr^VI/cellulose activated complexes. The second step is a Cr^VI → Cr^III reduction taking place on the cellulose surface. The Cr^III formed is only physically adsorbed to the cellulose or very weakly bound as small amounts of Cr^III can be released into the reaction medium. The Cr^VI adsorbed by cellulose appears mainly to be reduced to Cr^III. The reaction of Cr^VI with lignin has been shown to be the composition of the three successive reaction of Cr₂O₇^2?, HCrO₄^?, and CrO₄^2? with the guaiacyl units of lignin. Insoluble and stable Cr^VI/lignin complexes in which chromium maintains its hexavalent oxidation state are formed. Rate constants and energies of activation for all the reactions have been determined. The fixation of CrO₃-derived compounds on wood has been explained as the combination of the various reactions investigated. The results indicate that 60% of Cr is fixed irreversibly to the lignin of wood as Cr^VI and 40% is weakly bound, probably just precipitated, on the cellulose surface as Cr^III of which small amounts can be released in a water medium. The complex Cr^VI and Cr^III species forming complexes with the guaiacyl units have been identified.     

On-line product analysis of pine wood pyrolysis using synchrotron vacuum ultraviolet photoionization mass spectrometry

The pyrolysis process of pine wood, a promising biofuel feedstock, has been studied with tunable synchrotron vacuum ultraviolet photoionization mass spectrometry. The mass spectra at different photon energies and temperatures as well as time-dependent profiles of several selected species during pine wood pyrolysis process were measured. Based on the relative contents of three lignin subunits, the data indicate that pine wood is typical of softwood. As pyrolysis temperature increased from 300 to 700 °C, some more details of pyrolysis chemistry were observed, including the decrease of oxygen content in high molecular weight species, the observation of high molecular weight products from cellulose chain and lignin polymer, and potential pyrolysis mechanisms for some key species. The formation of polycyclic aromatic hydrocarbons (PAHs) was also observed, as well as three series of pyrolysis products derived from PAHs with mass difference of 14 amu. The time-dependent profiles show that the earliest products are formed from lignin, followed by hemicellulose products, and then species from cellulose.

Influence of the interaction of components on the pyrolysis behavior of biomass

There has been much interest in the utilization of biomass-derived fuels as substitutes for fossil fuels in meeting renewable energy requirements to reduce CO₂ emissions. In this study, the pyrolysis characteristics of biomass have been investigated using both a thermogravimetric analyzer coupled with a Fourier-transform infrared spectrometer (TG-FTIR) and an experimental pyrolyzer. Experiments have been conducted with the three major components of biomass, i.e. hemicellulose, cellulose, and lignin, and with four mixed biomass samples comprising different proportions of these. Product distributions in terms of char, bio-oil, and permanent gas are given, and the compositions of the bio-oil and gaseous products have been analysed by gas chromatography-mass spectrometry (GC-MS) and gas chromatography (GC). The TG results show that the thermal decomposition of levoglucosan is extended over a wider temperature range according to the interaction of hemicellulose or lignin upon the pyrolysis of cellulose; the formation of 2-furfural and acetic acid is enhanced by the presence of cellulose and lignin in the range 350-500 °C; and the amount of phenol, 2,6-dimethoxy is enhanced by the integrated influence of cellulose and hemicellulose. The components do not act independently during pyrolysis; the experimental results have shown that the interaction of cellulose and hemicellulose strongly promotes the formation of 2, 5-diethoxytetrahydrofuran and inhibits the formation of altrose and levoglucosan, while the presence of cellulose enhances the formation of hemicellulose-derived acetic acid and 2-furfural. Pyrolysis characteristics of biomass cannot be predicted through its composition in the main components.     

Extraction and Characterization of Cellulose Nanowhiskers from Balsa Wood

Summary: In this study cellulose nanowhiskers were obtained from balsa wood. For this purpose, fibers of balsa wood were exposed to hydrolysis reactions for lignin and hemicellulose digestion and acquisition of nano-scale cellulose. Transmission electron microscopy (TEM) results demonstrated that the obtained cellulose nanocrystals had average length and thickness of 176 (±68 nm) and 7.5 (±2.9 nm), respectively. Infrared spectroscopy (FTIR) and wide angle x-ray diffraction (WAXD) showed that the process for extracting the nanowhiskers digested nearly all the lignin and hemicellulose from the balsa fiber and still preserved the aspect ratio and crystallinity satisfactory enough for future application as nanofillers in polymer nanocomposites. The thermogravimetric analysis (TGA) showed that the onset temperature of thermal degradation of the cellulose nanocrystals (226 °C) was higher than the onset temperature of the balsa fiber (215 °C), allowing its use in molding processes with polymers melts.     

Instrumental analyses of nanostructures and interactions with water molecules of biomass constituents of Japanese cypress

Nanostructures consisting of the biomass constituents of the denatured Japanese cypress (Chamaecyparis obtusa) were examined by instrumental analyses at multiple hierarchical levels. Delignification with NaClO₂ solution smoothly proceeded to reveal a distorted cell by scanning electron microscopy; however, a trace amount of lignin still remained in the delignified sample according to attenuated total reflection infrared spectra (ATR-IR). Although hemicellulose could be removed by a treatment with NaOH solution, thermogravimetric analysis and ¹³C cross-polarization/magic angle spinning (CP-MAS) NMR showed a certain amount of hemicellulose remaining. Reaction of the delignified sample with NaOH solution produced a shrunken cell wall that consisted of cellulose with small amounts of lignin and hemicellulose, which were detected by ATR-IR and ¹³C CP-MAS NMR, respectively. These samples from which lignin and/or hemicellulose had been removed easily released water molecules, producing a decrease in the ¹H signal intensity and longer ¹H spin–lattice relaxation time (T₁H) values in variable temperature ¹H MAS NMR. The T₁H values provided information about nano-scale molecular interaction difficult to obtain by other instrumental analyses and they greatly changed depending on the water content and ratio of the biomass constituents. The spin–lattice relaxation of all samples occurred via water molecules under humid conditions that provided sufficient water. Under heat-dried conditions, the spin–lattice relaxation mainly occurred via lignin for the samples with lignin remaining while it occurred via cellulose/hemicellulose for the samples without lignin. The variable temperature T₁H analysis indicated that predominant spin–lattice relaxation route via lignin was caused by higher molecular mobility of lignin-containing samples compared with lignin-free samples.     

Degradation of lignin by ozone. III. The fate of the carbohydrate matrix during the degradation of spruce protolignin by ozone

Solvent-extracted spruce wood meal was ozonized in 45% aqueous acetic acid at room temperature. The ozone-treated wood meal was then extracted with dilute alkali at 65°C for 1 h. Lignin, α-cellulose, and hemicellulose content and the viscosities of the pulped wood-meal samples were measured as a function of the time of ozonization. Results indicate that although the attack on the wood components by ozone is not selective in this medium cellulose and hemicelluloses are degraded slowly compared with lignin. Lignin degraded approximately four times faster than the carbohydrates. At the fiber liberation point the pulp retained 78% of the original hemicelluloses and about 90% of the α-cellulose compared with 25% of the lignin. The pulp samples obtained during ozonization of the wood meal showed a slow decrease in the average degree of polymerization (DP); the limit reached near 350 was attributed to the inaccessibility of the ordered regions in native cellulose to ozone.     

Kinetic study of wood chips decomposition by TGA

Pyrolysis of a wood chips mixture and main wood compounds such as hemicellulose, cellulose and lignin was investigated by thermogravimetry. The investigation was carried out in inert nitrogen atmosphere with temperatures ranging from 20°C to 900°C for four heating rates: 2 K min⁻¹, 5 K min⁻¹, 10 K min⁻¹, and 15 K min⁻¹. Hemicellulose, cellulose, and lignin were used as the main compounds of biomass. TGA and DTG temperature dependencies were evaluated. Decomposition processes proceed in three main stages: water evaporation, and active and passive pyrolysis. The decomposition of hemicellulose and cellulose takes place in the temperature range of 200–380°C and 250–380°C, while lignin decomposition seems to be ranging from 180°C up to 900°C. The isoconversional method was used to determine kinetic parameters such as activation energy and pre-exponential factor mainly in the stage of active pyrolysis and partially in the passive stage. It was found that, at the end of the decomposition process, the value of activation energy decreases. Reaction order does not have a significant influence on the process because of the high value of the pre-exponential factor. Obtained kinetic parameters were used to calculate simulated decompositions at different heating rates. Experimental data compared with the simulation ones were in good accordance at all heating rates. From the pyrolysis of hemicellulose, cellulose, and lignin it is clear that the decomposition process of wood is dependent on the composition and concentration of the main compounds.     

生物质主要组分低温热解研究

利用热重分析仪和裂解气质联用仪进行生物质主要组分低温热解特性研究。热重实验结果表明,生物质主要组分的热稳定性为：纤维素>木质素>半纤维素。半纤维素主要热解温度在210℃～320℃,而纤维素和木质素的主要热解温度分别在310℃～390℃和200℃～550℃。裂解气质联用实验考察不同温度对生物质主要组分低温热解产物的影响。半纤维素热解产物主要有乙酸、1-羟基-丙酮和1-羟基-2-丁酮,纤维素热解产物主要包括左旋葡聚糖和脱水纤维二糖,而木质素热解产物主要是邻甲氧基苯酚。     

Fractionation of Wood with Binary Solvent 1-Butyl-3-methylimidazolium Acetate + Dimethyl Sulfoxide

It is suggested to use a binary solvent, 1-butyl-3-methylimidazolium acetate + dimethyl sulfoxide, for full dissolution of wood, followed by its separation into the polysaccharide and lignin components. The optimal conditions of the wood treatment process were determined (temperature 120°C, processing duration 6 h). A scheme is suggested for double-stage fractionation of the lignin?cellulose biomass. The scheme is based on the successive precipitation of the dissolved components with acetone and water. The isolated polysaccharide and lignin fractions constituting, combined, 70% of the initial mass of wood were characterized by IR and NMR spectroscopy, exclusion chromatography, electron microscopy, and functional analysis. It was found that the polysaccharide fraction has the form of amorphous cellulose (2% degree of crystallinity) containing about 15% lignin. The isolated lignin contains no significant admixtures of polysaccharides, has a mass-average molecular mass of about 5 kDa, and is close to organosolvent lignins. It was found that the lignin fraction contains up to 35% residual ionic fluid. A suggestion is made about the possibility of chemical binding between lignin and butyl-3-methylimidazolium cations.     

The chemistry and kinetic behavior of Cu-Cr-As/B wood preservatives. II. Fixation of the Cu/Cr system on wood

The kinetic behavior of a Cr⁶⁺/Cu²⁺ system in its reaction with wood has been elucidated. The same reactions with carbohydrates and lignin of wood for Cr^VI alone are still present. Approximately 20% of the copper is fixed to the guaiacyl units of lignin in the form of copper chromate; the remaining copper forms complexes with cellulose and mainly with the guaiacyl units of lignin. The Cr^VI/lignin guaiacyl unit complexes already found for the treatment of wood with CrO₃ are still the main Cr^VI complexes formed. Copper chromate is present as [Cu(H₂O)₂(guaiacol)]CrO₄(guaiacol) complexes, and CuCrO₄ bridges between different guaiacyl units of the lignin network appear to be likely. Substantial interference of the Cu²⁺ ions in the second-zone reactions of Cr^VI with wood occurs. The amount of Cr^VI and Cr^III fixed onto lignin and cellulose compares well with experimental values. Rate constants, energies of activation, and Arrhenius equations of the various reactions have been obtained. The amount of Cu²⁺ interference in the reaction has also been calculated.     

Mathematical Tool from Corn Stover TGA to Determine Its Composition

Corn stover was treated by steam explosion process at four different temperatures. A fraction of the four exploded matters was extracted by water. The eight samples (four from steam explosion and four from water extraction of exploded matters) were analysed by wet chemical way to quantify the amount of cellulose, hemicellulose and lignin. Thermogravimetric analysis in air atmosphere was executed on the eight samples. A mathematical tool was developed, using TGA data, to determine the composition of corn stover in terms of cellulose, hemicellulose and lignin. It uses the biomass degradation temperature as multiple linear function of the cellulose, hemicellulose and lignin content of the biomass with interactive terms. The mathematical tool predicted cellulose, hemicellulose and lignin contents with average absolute errors of 1.69, 5.59 and 0.74?%, respectively, compared to the wet chemical method.     

Plasma-Assisted Pretreatment of Wheat Straw

O₃ generated in a plasma at atmospheric pressure and room temperature, fed with dried air (or oxygen-enriched dried air), has been used for the degradation of lignin in wheat straw to optimize the enzymatic hydrolysis and to get more fermentable sugars. A fixed bed reactor was used combined with a CO₂ detector and an online technique for O₃ measurement in the fed and exhaust gas allowing continuous measurement of the consumption of O₃. This rendered it possible for us to determine the progress of the pretreatment in real time (online analysis). The process time can be adjusted to produce wheat straw with desired lignin content because of the online analysis. The O₃ consumption of wheat straw and its polymeric components, i.e., cellulose, hemicellulose, and lignin, as well as a mixture of these, dry as well as with 50% water, were studied. Furthermore, the process parameters dry matter content and milled particle size (the extent to which the wheat straw was milled) were investigated and optimized. The developed methodology offered the advantage of a simple and relatively fast (0.5–2 h) pretreatment allowing a dry matter concentration of 45–60%. FTIR measurements did not suggest any structural effects on cellulose and hemicellulose by the O₃ treatment. The cost and the energy consumption for lignin degradation of 100 g of wheat straw were calculated.     

Characterizing wood polymers in the primary cell wall of Norway spruce (<Emphasis Type="Italic">Picea abies</Emphasis> (L.) Karst.) using dynamic FT-IR spectroscopy

Dynamic Fourier Transform Infra-Red (FT-IR) spectroscopy was used to examine the interactions among cellulose, xyloglucan, pectin, protein and lignin in the outer fibre wall layers of spruce wood tracheids. Knowledge regarding these interactions is fundamental for understanding the fibre separation in a mechanical pulping process. Sheets made from an enriched primary cell wall material were used for studying the viscoelastic response of the polymers. The results indicated that strong interactions exist among lignin, protein, pectin, xyloglucan and cellulose in the primary cell wall. This signified a closely linked network structure of the components on the fibre surface. This ultrastructural arrangement in the primary cell wall and the relatively high content of lignin, pectin and protein in it, means that the primary cell wall is more submissive to selective chemical attacks, when compared to the secondary cell wall. A low ratio of cellulose Iα to cellulose Iβ in the primary cell wall was also found.     

Calculation of van der Waals interactions involving lipid vesicles

Van der Waals energies of interaction involving vesicles and lipid layers are calculated for different geometries. Results from exact and approximate calculations are compared with some existing experimental data. It is shown that sufficient accuracy can be obtained using relatively simple ‘additivity’ approximations for the contribution of dispersion interactions. A set of calculated results is presented for a small unilamellar vesicle interacting with coated and uncoated metal and polymer surfaces. A lipid coating lowers magnitude of the interaction energy approximately two-fold. The procedure gives a simple possibility to estimate Hamaker constants (and ‘Hamaker functions’) from handbook data taking into account the existing uncertainity in the materials constants of the interacting substances.     

组合催化剂WO3+Raney Ni上高效转化菊芋秸秆制乙二醇

采用商业WO₃和Raney Ni为组合催化剂, 以菊芋秸秆为反应原料制备了乙二醇. 菊芋秸秆中含纤维素51.6 wt%、半纤维素10.3 wt%、木质素17.2 wt%、灰分1.7 wt%和水溶性物质19.2 wt%. 木质素对纤维素和半纤维素的转化影响较小, 而水溶性物质的存在抑制了乙二醇的生成, 因此由未经过预处理的菊芋秸秆得到的乙二醇收率只有29.9%. 而经简单的热水预处理可除掉其中的大部分水溶物, 因而乙二醇收率提高到37.6%. 此外, 组合催化剂在经过热水预处理的菊芋秸秆的转化中表现出了更好的循环使用性能. 同时考察了反应温度和时间对菊芋秸秆转化的影响.