Chirality in the Absence of Rigid Stereogenic Elements: The Absolute Configuration of Residual Enantiomers of C3‐Symmetric Propellers

Two new tris(aryl)phosphane oxides existing as configurationally stable residual enantiomers have been synthesised and their racemates resolved by semipreparative HPLC on a chiral stationary phase (CSP HPLC). One of them, recognised as a conglomerate, could be resolved by fractional crystallisation at a preparative scale level. In this case, the absolute configuration of the propeller‐shaped molecule was determined by anomalous X‐ray scattering. The problem of the correlative assignment of the absolute configuration to all known C₃‐symmetric three‐bladed propeller‐shaped molecules existing as stable residual enantiomers is discussed. The configurational stability of the new chiral phosphane oxides and of the corresponding phosphanes was evaluated by CD signal decay kinetics and dynamic ¹H NMR spectroscopy. The racemisation barriers in phosphanes were found about 10 kcal mol^?1 lower than those found for the corresponding oxides, though geometry and inter‐ring gearing would be very similar in the two series. Configurational stability of residual tris(aryl)phosphanes was found to be influenced by the electronic availability of the phosphorus centre, as evaluated by electrochemical CV experiments.     

Steric and Electronic Effects on the Configurational Stability of Residual Chiral Phosphorus‐Centered Three‐Bladed Propellers: Tris‐aryl Phosphane Oxides

A series of tris‐aryl phosphane oxides existing as residual enantiomers or diastereoisomers with substituents on the aryl rings differing in size and electronic properties were synthesized and characterized. Their electronic properties were evaluated on the basis of their electrochemical oxidation and reduction potentials together with those of the corresponding “blade bromides” (i.e., the naphthalene derivatives displaying the same substitution pattern of the tris‐naphthyl phosphane oxide blades, with a bromo substituent where the phosphorus atom is located) determined by CV. The residual stereoisomeric phosphane oxides were isolated in a stereochemically pure state and were found to be highly configurationally stable at room temperature (stereoisomerization barriers of about 27 kcal mol^?1). The chiroptical properties of the residual stereoisomers and the assignments of absolute configuration are discussed. The configurational stability of residual tris‐aryl phosphane oxides was found to be scarcely influenced by the electronic properties of the substituents present on the aromatic rings constituting the blades, while steric effects play the most relevant role. Detailed theoretical calculations are in agreement with the experimental results and also contribute to a rational interpretation of the stereodynamics of these systems.     

Steric and Electronic Effects on the Configurational Stability of Residual Chiral Phosphorus‐Centered Three‐Bladed Propellers: Tris‐aryl Phosphanes

A series of tris‐aryl phosphanes, structurally designed to exist as residual enantiomers or diastereoisomers, bearing substituents differing in size and electronic properties on the aryl rings, were synthesized and characterized. Their electronic properties were evaluated on the basis of their electrochemical oxidation potential determined by voltammetry. The configurational stability of residual phosphanes, evaluated by dynamic HPLC on a chiral stationary phase or/and by dynamic ¹H and ³¹P NMR spectroscopy, was found to be rather modest (barriers of about 18–20 kcal mol^?1), much lower than that shown by the corresponding phosphane oxides (barriers of about 25–29 kcal mol^?1). For the first time, the residual antipodes of a tris‐aryl phosphane were isolated in enantiopure state and the absolute configuration assigned to them by single‐crystal anomalous X‐ray diffraction analysis. In this case, the racemization barrier could be calculated also by CD signal decay kinetics. A detailed computational investigation was carried out to clarify the helix reversal mechanism. Calculations indicated that the low configurational stability of tris‐aryl phosphanes can be attributed to an unexpectedly easy phosphorus pyramidal inversion which, depending upon the substituents present on the blades, can occur even on the most stable of the four conformers constituting a single residual stereoisomer.     

Nanographene Imides Featuring Dual‐Core Sixfold [5]Helicenes

A novel kind of nanographene imide, namely pentaperylene decaimides (PPD) featuring dual‐core sixfold [5]helicenes and ten imide groups, was efficiently obtained. Among the possible 28 stereoisomers, which include 14 pairs of enantiomers, only one pair of enantiomers was obtained selectively which could be separated by chiral HPLC. Single‐crystal X‐ray diffraction analyses revealed that it exhibits a D₂‐symmetric “four‐bladed propeller” conformation composed of conjoined double “three‐bladed propeller”, which is very stable and could not convert into other conformations even when heated up to 200 °C. Meanwhile, enantiomerically pure PPD also exhibits an excellent resistance to thermally induced racemization, which makes it a promising candidate for various applications in chiral material science.     

Effect of the residual silanol group protection on the liquid chromatographic resolution of α‐amino acids and proton pump inhibitors on a ligand exchange chiral stationary phase

A new ligand exchange chiral stationary phase (new CSP) containing residual silanol group‐protecting n‐octyl groups on the silica surface was prepared by treating a ligand exchange CSP (original CSP) based on sodium N‐[(R)‐2‐hydroxy‐1‐phenylethyl]‐N‐undecylaminoacetate bonded to silica gel with excess n‐octyltriethoxysilane. The new and original CSPs containing an identical amount of chiral selector were applied to the resolution of α‐amino acids and proton pump inhibitors (PPIs) including omeprazole, pantoprazole, lansoprazole, and rabeprazole. The separation factors (α) and resolutions (R_S) were greater on the new CSP than on the original CSP except for the resolution of asparagine. The trends of the retention factors (k₁) for the resolution of α‐amino acids on the new and original CSPs with the variation of the organic modifier content in aqueous mobile phase were opposite to those for the resolution of PPIs. Removal of the nonenantioselective interactions between the residual silanol groups and the analytes and the improved lipophilicity of the new CSP were proposed to be responsible for the improved chiral recognition ability of the new CSP and the different retention behaviors of the enantiomers between the new and original CSPs.     

Analytical and semipreparative chiral separation of cis‐itraconazole on cellulose stationary phases by high‐performance liquid chromatography

cis‐Itraconazole is a chiral antifungal drug administered as a racemate. The knowledge of properties of individual cis‐itraconazole stereoisomers is vital information for medicine and biosciences as different stereoisomers of cis‐itraconazole may possess different affinity to certain biological pathways in the human body. For this purpose, either chiral synthesis of enantiomers or chiral separation of racemate can be used. This paper presents a two‐step high‐performance liquid chromatography approach for the semipreparative isolation of four stereoisomers (two enantiomeric pairs) of itraconazole using polysaccharide stationary phases and volatile organic mobile phases without additives in isocratic mode. The approach used involves the separation of the racemate into three fractions (i.e. two pure stereoisomers and one mixed fraction containing the remaining two stereoisomers) in the first run and consequent separation of the collected mixed fraction in the second one. For this purpose, combination of cellulose tris‐(4‐methylbenzoate) and cellulose tris‐(3,5‐dimehylphenylcarbamate) columns with complementary selectivity for cis‐itraconazole provided full separation of all four stereoisomers (with purity of each isomer > 97%). The stereoisomers were collected, their optical rotation determined and their identity confirmed based on the results of a previously published study. Pure separated stereoisomers are subjected to further biological studies.     

Chromatographic separation and enantiomeric resolution of flurbiprofen and its major metabolites

Summary The chromatographic separation and resolution of the enantiomers of flurbiprofen and its two major metabolites, 4′-hydroxyflurbiprofen and 3′-hydroxy-4′-methoxyflurbiprofen was investigated using four different approaches: reversed-phase HPLC after pre-column derivatization with (R)-1-(naphthen-1-yl)ethylamine; reversed-phase HPLC using hydroxypropyl-β-cyclodextrin as a chiral mobile phase additive; chiral-phase HPLC using either an α₁-acid glycoprotein CSP (Chiral-AGP) or an amylose tris(3,5-dimethylphenylcarbamate) CSP (Chiralpak AD). Of all the approaches, only the direct method using the Chiralpak AD CSP demonstrated separation and enantiomeric resolution of all three analytes within an acceptable run time of 45 minutes. Enantiomeric resolution values of 1.67,3.67 and 3.44 were obtained for flurbiprofen, 4′-hydroxyflurbiprofen and 3′-hydroxy-4′-methoxyflurbiprofen respectively. Semi-preparative isolation of the individual enantiomers of both metabolites, followed by CD analysis, revealed that the elution order on the AD CSP wasR-beforeS-enantiomer for both metabolites and the same as that observed for flurbiprofen. The metabolite elution order was subsequently confirmed on the analysis of urine samples obtained from a healthy volunteer following oral administration of the individual drug enantiomers.     

Enantioseparation of selected chiral sulfoxides in high‐performance liquid chromatography with polysaccharide‐based chiral selectors in polar organic mobile phases with emphasis on enantiomer elution order

The separation of the enantiomers of 17 chiral sulfoxides was studied on polysaccharide‐based chiral columns in polar organic mobile phases. Enantiomer elution order (EEO) was the primary objective in this study. Two of the six chiral columns, especially those based on amylose tris(3,5‐dimethylphenylcarbamate) and cellulose tris(4‐chloro‐3‐methylphenylcarbamate) (Lux Cellulose‐4) proved to be most successful in the separation of the enantiomers of the studied sulfoxides. Interesting examples of EEO reversal were observed depending on the chiral selector or the composition of the mobile phase. For instance, the R‐(+) enantiomer of lansoprazole eluted before the S‐(?) enantiomer on Lux Cellulose‐1 in both methanol or ethanol as the mobile phase, while the elution order was opposite in the same eluents on amylose tris(3,5‐dimethylphenylcarbamate) with the S‐(?) enantiomer eluting before the R‐(+) enantiomer. The R‐(+) enantiomer of omeprazole eluted first on Lux Amylose‐2 in methanol but it was second when acetonitrile was used as the mobile phase with the same chiral selector. Several other examples of reversal in EEO were observed in this study. An interesting example of the separation of four stereoisomers of phenaminophos sulfoxide containing chiral sulfur and phosphor atoms is also reported here.     

Direct chiral resolution of cloquintocet-mexyl and its application to in vitro degradation combined with clodinafop-propargyl

A simple chiral high‐performance liquid chromatography (HPLC) method with ultraviolet (UV) detection was developed and validated for measuring Cloquintocet‐mexyl (ClM) enantiomers and clodinafop‐propargyl (CP) using cellulose tris‐(3,5‐dimethylphenylcarbamate) (CDMPC) as chiral stationary phase (CSP). The effects of mobile phase composition and column temperature on the ClM enantiomer separation were investigated. Good separation was achieved by using a mixture of n‐hexane and n‐propanol as mobile phase. Based on the chiral HPLC method, enantioselective quantitative determination analysis methods for this herbicide combined with CP in diluted plasma were developed and validated. The assay method was linear over a range of concentrations (0.5–100 µg/mL) in diluted plasma and the mean recovery was greater than 80% for both enantiomers and CP. The limits of quantification and detection for both ClM enantiomers and CP were 0.5 and 0.2 µg/mL, respectively. Intra‐ and interday relative standard deviations did not exceed 10% for three tested concentrations. The result suggested that the degradation of ClM enantiomers was stereoselective in rabbit plasma, and both rac‐ClM and CP degraded quickly in plasma, showing that the main existing forms with biological effect in animals are their metabolites. Copyright © 2011 John Wiley & Sons, Ltd.     

Analytical and semi‐preparative enantioresolution of (RS)‐ketorolac from pharmaceutical formulation and in human plasma by HPLC

An efficient, simple, validated, analytical and semi‐preparative HPLC method has been developed for direct enantioresolution of (RS)‐Ketorolac (Ket) using monochloro‐methylated derivatives of cellulose and amylose, i.e. cellulose (tris‐3‐chloro‐4‐methylphenylcarbamate) and amylose (tris‐5‐chloro‐2‐methylphenylcarbamate) as chiral stationary phases (CSPs) with photo diode array detection at 320 nm. Enantioresolution was carried out in samples of human plasma spiked with (RS)‐Ket under normal and reversed‐phase elution modes with suitable mobile phase compositions. The effect of nature of alcohols (MeOH, EtOH, PrOH and n‐BuOH) and other solvents (MeCN and MeOH) as organic modifiers in the mobile phase was investigated on the separation performance of two CSPs in terms of retention and separation of enantiomers. The best resolution was observed on cellulose‐based CSP using EtOH, while using 2‐PrOH (15%) and amylose‐based CSP obtained the highest retention. Under reversed‐phase elution mode the best enantioseparation was observed using 30% MeCN with ammonium formate buffer. The elution order of enantiomers was ascertained by determining specific rotations. The limit of detection and quantitation values were 5 and 15.5 ng/mL for each enantiomer of (RS)‐Ket, respectively. Copyright © 2016 John Wiley & Sons, Ltd.     

Scope and Limitations of the s-Block Metal-Mediated Pudovik Reaction

The hydrophosphorylation of phenylacetylene with di(aryl)phosphane oxides Ar₂P(O)H (Pudovik reaction) yields E/Z-isomer mixtures of phenylethenyl-di(aryl)phosphane oxides ( 1 ). Alkali and alkaline-earth metal di(aryl)phosphinites have been studied as catalysts for this reaction with increasing activity for the heavier s-block metals. The Pudovik reaction can only be mediated for di(aryl)phosphane oxides whereas P-bound alkyl and alcoholate substituents impede the P−H addition across alkynes. The demanding mesityl group favors the single-hydrophosphorylated products 1-Ar whereas smaller aryl substituents lead to the double-hydrophosphorylated products 2-Ar . Polar solvents are beneficial for an effective addition. Increasing concentration of the reactants and the catalyst accelerates the Pudovik reaction. Whereas Mes₂P(O)H does not form the bis-phosphorylated product 2-Mes , activation of an ortho-methyl group and cyclization occurs yielding 2-benzyl-1-mesityl-5,7-dimethyl-2,3-dihydrophosphindole 1-oxide ( 3 ).     

Preparation and Evaluation of a Novel Cellulose Tris(N‐3,5‐dimethylphenylcarbamate) Chiral Stationary Phase

A novel cellulose tris(N‐3,5‐dimethylphenylcarbamate) (CDMPC) chiral stationary phase (CSP) was prepared by coating CDMPC on TiO₂/SiO₂, which was prepared by coating titania nanoparticles on silica through a self‐assemble technique. At first, 2‐hydroxyl‐phenyl acetonitrile and α‐phenylethanol were separated on this new CSP to evaluate the chiral separation ability. Then, two pesticides, matalaxyl and diclofop‐methyl were separated. The influence of the mobile phase composition on the enantioselectivity was discussed, and the repeatability and stability of the CSP were studied too.     

Stereocontrolled Synthesis of Chiral Heteroaromatic Propellers with Small Optical Bandgaps

Chiral heteroaromatic propellers based on radially π‐extended hexapyrrolohexaazacoronenes were obtained in a concise synthesis from suitably functionalized donor–acceptor monopyrroles. To overcome steric hindrance, a new cyclodehydrogenation method was developed, and it uses bromine electrophiles as oxidative coupling agents instead of the commonly employed high‐potential oxidants. The new reaction offers high yields of propeller‐shaped targets, even for electron‐deficient precursors, and shows electrophile‐dependent stereoselectivity, with N‐bromosuccinimide and dibromine yielding, respectively D₆‐ and C₂‐symmetric products. The propeller azacoronenes are chiral and can be separated into configurationally stable enantiomers. In addition to providing steric bulk, peripheral functionalization considerably affects the electronic properties of the propellers, which exhibit reduced optical and electrochemical band gaps, and a more clearly defined electroreduction behavior.     

Determination of enantiomeric purity of S‐amlodipine by chiral LC with emphasis on reversal of enantiomer elution order

An LC method was developed and prevalidated for the enantiomeric purity determination of S‐amlodipine in polar organic solvent chromatography using a chlorine‐containing cellulose‐based chiral stationary phase (CSP). The concentration of formic acid (FA) (0.01–0.2%) in the mobile phase containing acetonitrile as the main solvent was found to influence the elution order of amlodipine enantiomers as well as the enantioresolution. A reversal of the enantiomer elution order of amlodipine was only observed with chiral stationary phases with both electron‐withdrawing (chloro) and electron‐donating groups (methyl) on the phenyl moieties of the chiral selector, namely cellulose tris(3‐chloro‐4‐methylphenylcarbamate) and cellulose tris(4‐chloro‐3‐methylphenylcarbamate). The highest enantioresolution (R_s: 4.1) value was obtained at the lowest FA concentration (0.01%) using cellulose tris(4‐chloro‐3‐methylphenylcarbamate) as the chiral selector and the enantiomeric impurity, R‐amlodipine, eluted first under these conditions. Therefore, the mobile phase selected for the prevalidation of the method consisted of ACN/0.1% DEA/0.01% FA and the temperature was set at 25°C. The method was prevalidated by means of the strategy based on the total measurement error and the accuracy profile. The method was found to be selective and the limit of quantification was found to be about 0.05% for R‐amlodipine, while the limit of detection was close to 0.02%.     

Direct resolution of the enantiomers of new diphosphine and diphosphine oxide ligands by high-performance liquid chromatography

Summary Resolution of the enantiomers of new racemic diphosphines, which are very useful ligands for stereoselective catalysts, and of the corresponding phosphine oxides has been investigated by high-performance liquid chromatography (HPLC) on four different chiral stationary phases (CSP)—Chiralpak AD, Whelk-01, and Supelcosil naphthylurea and phenylurea columns. The mobile phases were optimized to achieve separation of the enantiomers. α andR _S values ranged from 1.05 to 5.17 and from 0.37 to 6.57, respectively, for the Chiralpak AD and (R,R)-Whelk-01 columns. For the Supelcosil LC-(R)-phenylurea and Supelcosil LC-(S)-naphthylurea columns α values ranged from 1.05 to 1.62 andR _S from 0.35 to 3.61.     

Enantioseparation of Novel Chiral Tetrahedral Clusters on an Amylosoe Tris-（3,5-dimethylphenylcarbamate） Chiral Stationary Phase by Normal Phase HPLC

Amylose tris(3,5-dimethylphenylcarbamate) (ADMPC) coated on a kind of small particle silica gel was prepared. On this ADMPC chiral stationary phase (CSP), the direct enantiomeric separation of six novel chiral transition metal tetrahedral clusters has firstly been achieved using n-hexane as the mobile phase containing various alcohols as modifiers. The effect of mobile phase modifiers and the structural variation of the solutes on their retention factors (k‘) and resolutions (Rs) were investigated. The result suggests that not only the structure and concentration of alcohol in mobile phase, but also the structural differences in racemates can have a pronounced effect on enantiomeric separation. ADMPC-CSP is a suitable CSP for the optical resolution of chiral tetrahedral cluster by HPLC.     

Efficient enantiorecognition of ruthenium(II) complexes by silica-bound teicoplanin

A series of chiral tris-diimine ruthenium(II) complexes have been resolved by HPLC on a chiral stationary phase. The stationary phase (CSP1) was prepared by covalent attachment of the glycopeptide antibiotic teicoplanin to isocyanate activated silica gel. CSP1 selectively retains the enantiomers of [Ru(L)₃]²⁺ (L=2,2′-bypyridine (bpy), 1,10-phenanthroline and 4,7-diphenyl-1,10-phenanthroline), with a preference for the Δ isomer. For the mixed-ligand complexes [Ru(bpy)₂pztr]⁺ and [Ru(bpy)₂pytr]⁺ (Hpztr=3-(pyrazin-2-yl)-1,2,4-triazole, Hpytr=3-(pyridin-2-yl)-1,2,4-triazole), where the triazole unit is bound to the metal centre either through the N² or the N⁴ nitrogen of the ring, CSP1 discriminates both the enantiomers and the regioisomers. Diastereo- and enantioselective association was also observed between CSP1 and the stereoisomers of the dinuclear complex ((Ru(bpy)₂)₂bpt]³⁺ (Hbpt=3,5-bis(pyridin-2-yl)-1,2,4-triazole), with differences in binding affinities of 1.4 kJ/mol between the homochiral enantiomers.     

Evaluation and Comparison of a 3,5‐Dimethylphenyl Isocyanate Teicoplanin with Phenyl Isocyanate Teicoplanin Chiral Stationary Phase Using RP‐HPLC

HPLC enantiomeric separations of 8 α‐amino acids were achieved using two self‐made chiral stationary phases (CSP)–phenyl isocyanate teicoplanin (Phe‐TE) and 3,5‐dimethylphenyl isocyanate teicoplanin (DMP‐TE), using reversed phase mobile phases. The Phe‐TE or the DMP‐TE CSP was prepared from the TE using derivative agents, phenyl isocyanate or 3,5‐dimethylphenyl isocyanate, respectively. The chromatographic results were given as the retention, selectivity, resolution factor and the enantioselective free energy difference corresponding to the separation of the two enantiomers. The effect of pH, organic modifier type and amount were discussed, and the stereoselectivities for two TE‐based CSPs were compared. The chiral selectivity factor for six α‐amino acids on DMP‐TE is somewhat bigger than that on Phe‐TE CSP under reversed phase (RP) mode. Comparison of the enantiomeric separations using self‐made Phe‐TE and DMP‐TE was conducted to gain a better understanding of the chiral recognition mechanism of the macrocyclic glycopeptide CSP.     

Enantiomer resolution of intrinsically chiral C21-alkylated N-confused porphyrin complexes

The resolution of stereoisomers of C21‐alkylated nickel(II) complexes of N‐confused porphyrin (NCP) was performed by means of chiral‐phase HPLC with an effectiveness of above 90 % molar ratio for each isomer. The reverse signs of the Cotton effects in the circular dichroism (CD) spectra of the separated fractions are indicative of the pair of enantiomers. The application of low‐temperature 2D NMR methods to the separated diastereomers of the system comprising a chiral 2‐(S)‐methylbutyl substituent, in connection with the CD spectra and relative HPLC migration rates, allowed the assignment of the absolute configuration of the chiral C21‐substituted complexes of NCP. The assignment was confirmed by time‐dependent DFT (TDDFT) calculations of CD spectra for the C21‐methylated nickel(II) complex. The system remains chiral after removal of the metal ion from the macrocyclic crevice, despite the fact that this demetalation is connected with a change of the C21 hybridization from pyramidal to trigonal. The retention of chirality was established by means of CD spectra and confirmed by TDDFT calculations for a C21‐methylated NCP free base. Stereoisomers were also separated for three covalently linked bis(NCP) systems with bridges involving one or two C21 carbon atoms. The occurrence of a pair of enantiomers was established for nonsymmetrical dimers comprising only one stereogenic center. In the case of the 21,21′‐(o‐xylene)‐linked dimer, three stereoisomers, that is, a pair of enantiomers and an optically inactive meso‐form, were separated and analyzed by CD and ¹H NMR spectroscopy. The stereoisomers of a diastereoselectively formed nonsymmetrical chloroplatinum(II)‐linked dimer, consisting of heterochiral C21‐alkylated NCP nickel(II) subunits, after separation displayed a strong optical activity, which can be ascribed to the rigid helical structure of the complex.     

A novel C2 symmetric chiral stationary phase with N‐[(4‐Methylphenyl)sulfonyl]‐l‐leucine as chiral side chains

In this study, a series of chiral stationary phases based on N‐[(4‐methylphenyl)sulfonyl]‐l ‐leucine amide, whose enantiorecognition property has never been studied, were synthesized. Their enantioseparation abilities were chromatographically evaluated by 67 enantiomers. The chiral stationary phase derived from N‐[(4‐methylphenyl)sulfonyl]‐l ‐leucine showed much better enantioselectivities than that based on N‐(4‐methylbenzoyl)‐l ‐leucine amide. The construction of C₂ symmetric chiral structure greatly improved the enantiorecognition performance of the stationary phase. The C₂ symmetric chiral stationary phase exhibited superior enantioresolutions to other chiral stationary phases for most of the chiral analytes, especially for the chiral analytes with C₂ symmetric structures. By comparing the enantioseparations of the enantiomers with similar structures, the importance of hydrogen bond interaction, π–π interaction, and steric hindrance on enantiorecognition was elucidated. The enantiorecognition mechanism of trans‐N,N′‐(1,2‐diphenyl‐1,2‐ethanediyl)bis‐acetamide, which had an excellent separation factor on the C₂ symmetric chiral stationary phase, was investigated by ¹H‐NMR spectroscopy and 2D ¹H‐¹H nuclear overhauser enhancement spectroscopy.