Multicyclic polyethers derived from 1,1,1‐tris(4‐hydroxyphenyl)ethane and 2,6‐dihalopyridines

Poly(pyridine ether)s were prepared in two ways: the polycondensation of silylated 1,1,1‐tris(4‐hydroxyphenyl)ethane (THPE) with 2,6‐difluoropyridine (method A) and the polycondensation of free THPE with 2,6‐dichloropyridine (method B). With method A, the THPE/difluoropyridine feed ratio was varied from 1.0:1.0 to 1.0:1.6. Cycles, bicycles, and multicycles were the main reaction products, and crosslinking was never observed. When ideal stoichiometry was used exclusively, multicycles free of functional groups were obtained. These multicycles were detectable in matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectra up to B₃₈C₇₆ with a mass of approximately 32,000 Da. With method B, the reaction conditions were varied at a fixed feed ratio to achieve an optimum for the preparation of multicyclic polyethers, but because of the lower reactivity of 2,6‐dichloropyridine, a quantitative conversion was not achieved. The reaction products were characterized with MALDI‐TOF mass spectrometry, viscosity measurements, and size exclusion chromatography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5725–5735, 2004     

Enantioseparation of selected chiral sulfoxides using polysaccharide-type chiral stationary phases and polar organic, polar aqueous-organic and normal-phase eluents

HPLC enantioseparation of selected chiral sulfoxides was studied using cellulose and amylose phenylcarbamate derivatives as chiral stationary phases (CSPs). The contributions of various functional groups of a chiral analyte as well as the polysaccharide derivatives in the analyte retention and chiral recognition were evaluated. A very high enantioseparation factor exceeding 110 was observed in the enantioseparation of 2-(benzylsulfinyl)benzamide (BSBA) on cellulose tris(3,5-dichlorophenylcarbamate) (CDCPC) CSP by using 2-propanol as a mobile phase. The enantiomer elution order was opposite on cellulose and amylose phenylcarbamates. For the polysaccharide-type CSPs, pure alcohols such as methanol, ethanol and 2-propanol represent a valuable alternative to more common alcohol-hydrocarbon and reversed-phase eluents.     

Enantioseparation of the anticoagulant drug phenprocoumon in capillary electrophoresis with UV and laser-induced fluorescence detection and application of the method to urine samples

The enantioseparation of phenprocoumon (PhC) in capillary electrophoresis (CE) has been studied using various cyclodextrins (CDs) such as native alpha, beta and gamma-CD and several neutral and randomly, as well as selectively substituted charged CD derivatives. Reversal of the enantiomer migration order was observed when using heptakis(2,3,6-tri-O-methyl (TM)-beta-CD as a chiral selector compared to all other CDs used. The detection of PhC was performed using either UV or laser-induced fluorescence (LIF) detection. The limit of detection (LOD) observed with LIF detection was ca. 20 times lower compared to UV. The method has been applied to the analysis of urine samples of the patient under treatment with PhC in combination with other drugs such as ramipril, hydrochlorothiazide, and nifedipine.     

Enantiomeric resolution of chiral imidazole derivatives using capillary electrophoresis with cyclodextrin-type buffer modifiers

Enantiomeric resolutions of some chiral pharmaceuticals containing the imidazole (1,3-diazole) moiety were carried out using capillary electrophoresis. Various native cyclodextrins (ga-, β- and γ-cyclodextrin) and derivatized cyclodextrins (hydroxypropyl-, and sulfobutyl ether-β-cyclodextrin) were used as chiral buffer modifiers. The effects of the cavity size, the structure and the charge of the selectors on the chiral recognition ability were evaluated. The influence of the type and concentration of the organic modifier on the separation of miconazole enantiomers and the pH of the run buffer on the separation of enilconazole enantiomers was also studied.     

Enhanced performance of expanded bed chromatography on rigid superporous adsorbent matrix

Rigid spherical macroporous adsorbent beads with surface hydroxyl groups were prepared by cross-linking of cellulose. These beads had diameter in the range 100-200 microm and a mean pore size of about 3 microm with about 60% pore volume. The matrix (bulk density approximately 1600 kg m(-3)) could be expanded into a stable bed and used for protein chromatography. Chromatographic runs were performed on a 10 mm diameter column under non-retaining and retaining conditions on the prepared matrix (called Celbeads) and performance of the runs was measured in terms of the height equivalent to a theoretical plate (HETP). The HETP curves in both packed and expanded bed modes followed profiles typical of macroporous adsorbents, i.e. increasing and levelling with velocity. Unimpaired performance of the matrix at increasing flow-rates permitted expanded bed elution of adsorbed solutes without loss of efficiency in terms of purification factor and product concentration. As a model system, Celbeads was used to purify lactate dehydrogenase from porcine muscle homogenate by dye-affinity chromatography. The prepared matrix provided about 100 theoretical plates per meter for the enzyme system at a linear flow velocity of 1.27 cm x min(-1) in an expanded bed elution mode, and gave enzyme yields of 100% with a purification factor of 31 using an optimized procedure. The adsorbent could be cleaned in place with 5 M urea and used repeatedly without loss of performance.     

Enantioseparations of polyhalogenated 4,4’-bipyridines on polysaccharide-based chiral stationary phases and molecular dynamics simulations of selector–selectand interactions

2’-(4-Pyridyl)- and 2’-(4-hydroxyphenyl)-TCIBPs (TCIBP = 3,3’,5,5’-tetrachloro-2-iodo-4,4’-bipyridyl) are chiral compounds that showed interesting inhibition activity against transthyretin fibrillation in vitro. We became interested in their enantioseparation since we noticed that the M-stereoisomer is more effective than the P-enantiomer. Based thereon, we recently reported the enantioseparation of 2’-substituted TCIBP derivatives with amylose-based chiral columns. Following this study, herein we describe the comparative enantioseparation of both 2’-(4-pyridyl)- and 2’-(4-hydroxyphenyl)-TCIBPs on four cellulose phenylcarbamate-based chiral columns aiming to explore the effect of the polymer backbone, as well as the nature and position of substituents on the side groups on the enantioseparability of these compounds. In the frame of this project, the impact of subtle variations of analyte and polysaccharide structures, and mobile phase (MP) polarity on retention and selectivity was evaluated. The effect of temperature on retention and selectivity was also considered, and overall thermodynamic parameters associated with the analyte adsorption onto the CSP surface were derived from van ’t Hoff plots. Interesting cases of enantiomer elution order (EEO) reversal were observed. In particular, the EEO was shown to be dependent on polysaccharide backbone, the elution sequence of the two analytes being P-M and M-P on cellulose and amylose tris(3,5-dimethylphenylcarbamate), respectively. In this regard, a theoretical investigation based on molecular dynamics (MD) simulations was performed by using amylose and cellulose tris(3,5-dimethylphenylcarbamate) nonamers as virtual models of the polysaccharide-based selectors. This exploration at the molecular level shed light on the origin of the enantiodiscrimination processes.     

Enantioseparations using capillary electromigration techniques in nonaqueous buffers

This review summarizes recent developments in the field of enantioseparations in capillary electromigration techniques using nonaqueous background electrolytes. The more established and rather intensively reviewed field of nonaqueous chiral capillary electrophoresis (NAQ-CE) is covered in less detail whereas more attention is paid to the relatively new field of nonaqueous capillary electrochromatography (NAQ-CEC).     

High performance liquid chromatographic separation of dipeptide and tripeptide enantiomers using a chiral crown ether stationary phase

A chiral stationary phase (CSP) based on (-)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was evaluated for the direct resolution of the enantiomers of dipeptides and tripeptides. The type and concentration of the acid and the methanol content were optimized with regard to retention time and resolution using Ala-Phe as model peptide. A mobile phase consisting of 10 mM sulfuric acid in 70% aqueous methanol was applied to the separation of a set of 16 structurally diverse dipeptides and tripeptides. Generally, the configuration of the amino acid at the N-terminus determined the enantiomer elution order. With a few exceptions the LL- and LD-enantiomers interacted stronger with the CSP compared to the corresponding DD- or DL-enantiomers. The experimental conditions also allowed the simultaneous separation of all four stereoisomers of Ala-Phe. Addition of ammonium sulfate generally reduced retention times and enantiomer resolution. Addition of triethylamine as modifier led to an overall increase of the retention times while the resolution did not show a general trend, increasing in the case of Ala-Ala but decreasing in the case of Ala-Phe.     

Comparative enantioseparations with native beta-cyclodextrin,randomly acetylated beta-cyclodextrin and heptakis-(2,3-di-O-acetyl)-beta-cyclodextrin in capillary electrophoresis

Comparative enantioseparations were performed with three neutral cyclodextrins (CDs) in capillary electrophoresis (CE). In particular, native beta-CD was compared with single component heptakis(2,3-di-O-acetyl)-beta-CD (HDA-beta-CD) and randomly acetylated beta-CD (Ac-beta-CD) with the emphasis on the enantiomer migration order. The opposite affinity of the enantiomers of several chiral analytes was observed towards native beta-CD and its acetylated derivatives. The enantiomer affinity pattern of some chiral analytes was also opposite towards the two acetylated derivatives of beta-CD. In the case of the chiral drug clenbuterol (CL) an attempt was made to evaluate the possible structural reasons of the affinity reversal using one- and two-dimensional as well as transverse rotating frame nuclear Overhauser effect spectroscopy (ROESY). Significant differences were observed between the structure of the CL complexes with beta-CD and HDA-beta-CD.     

Effects of final-state interaction and screening on strange- and heavy-quark production

Final-state interaction and screening have a great influence on $q\bar q$ production cross sections, which are important quantities in many problems in quark-gluon plasma physics. They lead to an enhancement of the cross section for a $q\bar q$ color-singlet state and a suppression for a color-octet state. The effects are large near the production threshold. The presence of screening gives rise to resonances for $q\bar q$ production just above the threshold at specific plasma temperatures. These resonances, especially $c\bar c$ and $b\bar b$ resonances, may be utilized to search for the quark-gluon plasma by studying the temperature dependence of heavy-quark pair production just above the threshold.