P3HT修饰一维有序壳核式CdS/ZnO纳米棒阵列复合膜的光电化学性能

采用电化学方法在铟锡氧化物(ITO)导电玻璃上制备了高度有序的ZnO纳米棒阵列, 在ZnO纳米棒阵列上先后电化学沉积CdS纳米晶膜及聚3-己基噻吩(P3HT)薄膜得到P3HT修饰的一维有序壳核式CdS/ZnO纳米阵列结构, 并通过扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、能量散射X射线(EDX)等表征手段证实了该结构的形成. 以此纳米结构薄膜为光阳极组装新型半导体敏化太阳电池, 研究了CdS纳米晶膜的厚度和P3HT薄膜的沉积对电池光伏性能的影响, 初步探讨了电荷在电池结构中的传输机理, 结果表明, CdS纳米晶膜和P3HT薄膜的沉积有效地拓宽了光阳极的光吸收范围, 实验中电池的光电转换效率最高达到1.08%.     

P3HT/CdS/TiO2/ZnO一维有序核壳式纳米棒阵列的构制及其在杂化太阳电池中的应用研究

采用恒电位法在铟锡氧化物导电玻璃(ITO)上制备了高度有序一维ZnO纳米棒阵列,将ZnO纳米棒阵列在TiO2溶胶中采用提拉法制备出了一维TiO2/ZnO核壳式纳米棒阵列.在一维TiO2/ZnO核壳式纳米棒阵列上电沉积CdS纳米晶得到一维CdS/TiO2/ZnO核壳式纳米棒阵列,然后在一维CdS/TiO2/ZnO核壳式纳米棒阵列上电沉积聚3-己基噻吩(P3HT)薄膜得到P3HT/CdS/TiO2/ZnO核壳式纳米结构薄膜.以该纳米结构薄膜电极为光阳极制备出新型纳米结构杂化太阳电池,研究了该类电池的光电转换性能,初步探讨了该类电池的工作机理.     

基于1D/0D有序复合SnO2纳米晶的钙钛矿太阳能电池

通过水热前驱体中的功能添加剂调控一维(1D)纳米棒阵列疏密度,继而在纳米棒间隙沉积零维(0D)纳米颗粒,制备1D/0D有序的复合SnO2电子传输层(ETL),并组装高效、稳定的钙钛矿太阳能电池。系统研究前驱体中NaCl添加剂以及后续纳米颗粒的沉积对复合ETL的形貌结构、光谱性能及界面电荷过程的作用规律,探讨上述作用对电池光电性能的影响机制。前驱体中NaCl的加入使棒密度变小,从而使0D纳米颗粒顺利渗透到1D纳米棒间隙中,其对钙钛矿/ETL和钙钛矿/FTO界面复合的抑制作用是造成器件开路电压和填充因子增大的原因。在经2 mL饱和NaCl水溶液改性的1D电子传输层ETL-2Cl的基础上,继续沉积0D的纳米颗粒,制备得到新型1D/0D复合电子传输层ETL-2P,后者优良的电荷复合抑制作用(复合电阻是ETL-2Cl的2.9倍)和高效的电子抽提性能(抽提速率3.03×10^7 s^-1,抽提效率91.6%)促成了电池较优的光电性能(光电效率12.15%)。     

Correlating interface heterostructure, charge recombination, and device efficiency of poly(3-hexyl thiophene)/TiO2 nanorod solar cell

The charge recombination rate in poly(3-hexyl thiophene)/TiO(2) nanorod solar cells is demonstrated to correlate to the morphology of the bulk heterojunction (BHJ) and the interfacial properties between poly(3-hexyl thiophene) (P3HT) and TiO(2). The recombination resistance is obtained in P3HT/TiO(2) nanorod devices by impedance spectroscopy. Surface morphology and phase separation of the bulk heterojunction are characterized by atomic force microscopy (AFM). The surface charge of bulk heterojunction is investigated by Kelvin probe force microscopy (KPFM). Lower charge recombination rate and lifetime have been observed for the charge carriers in appropriate heterostructures of hybrid P3HT/TiO(2) nanorod processed via high boiling point solvent and made of high molecular weight P3HT. Additionally, through surface modification on TiO(2) nan,orod, decreased recombination rate and longer charge carrier lifetime are obtained owing to creation of a barrier between the donor phases (P3HT) and the acceptor phases (TiO(2)). The effect of the film morphology of hybrid and interfacial properties on charge carrier recombination finally leads to different outcome of photovoltaic I-V characteristics. The BHJ fabricated from dye-modified TiO(2) blended with P3HT exhibits 2.6 times increase in power conversion efficiency due to the decrease of recombination rate by almost 2 orders of magnitude as compared with the BHJ made with unmodified TiO(2). In addition, the interface heterostructure, charge lifetime, and device efficiency of P3HT/TiO(2) nanorod solar cells are correlated.     

Preparation of dye-sensitized solar cells using template free TiO2 nanotube arrays for enhanced power conversion

Journal of Sol-Gel Science and Technology - By using the vertically aligned ZnO nanorod arrays (NRAs), TiO2 nanoparticles attached ZnO nanorods (TiO2@ZnO) and TiO2 nanotube arrays (NTAs) were...     

Effect of seeded substrates on hydrothermally grown ZnO nanorods

We report a study on the effect of seeding on glass substrates with zinc oxide nanocrystallites towards the hydrothermal growth of ZnO nanorods from a zinc nitrate hexahydrate and hexamethylenetetramine solution at 95 °C. The seeding was done with pre-synthesized ZnO nanoparticles in isopropanol with diameters of about 6–7 nm as well as the direct growth of ZnO nanocrystallites on the substrates by the hydrolysis of pre-deposited zinc acetate film. The nanorods grown on ZnO nanoparticle seeds show uniform dimensions throughout the substrate but were not homogenously aligned vertically from the substrate and appeared like nanoflowers with nanorod petals. Nanorods grown from the crystallites formed in situ on the substrates displayed wide variations in dimension depending upon the preheating and annealing conditions. Annealing the seed crystals below 350 °C led to scattered growth directions whereupon preferential orientation of the nanorods perpendicular to the substrates was observed. High surface to volume ratio which is vital for gas sensing applications can be achieved by this simple hydrothermal growth of nanorods and the rod height and rod morphology can be controlled through the growth parameters.     

Improved Energy Conversion Efficiency of ZnO/Polythiophene Solar Cell in Ga-Doped ZnO Nanorod Array Photoanode

We reported the fabrication and doping effect of Ga-doped ZnO nanorods/electropolymerized polythio-phene(e-PT) hybrid photovoltaic(h-PV) devices. Ga-Doped ZnO nanorod array photoanode devices were fabricated via hydrothermally growing nanorods on sol-gel spin-coating ZnO seed layer, and then the nanorod array was immersed into a thiophene solution to yield a thin polythiophene film by electrochemically polymerization. Afterwards, a thin layer of Al was deposited on the surface of polythiophene to make an electrode for photovoltaic measurement. The ZnO nanorods with different Ga-doping contents were characterized by means of X-ray diffraction(XRD), scanning electron micrograph(SEM) and X-ray photoelectron spectroscopy(XPS). Photovoltaic J-V characterization was performed on the e-PT/ZnO bilayer and bulk heterojunction(BHJ) devices. Though the unsubstituted polythiophene is not an ideal polymer material for solar cells with high power conversion efficiency, it is a sound model for the study on the effect of dopant in hybrid materials. The results indicate that doping Ga can substantially improve the power conversion efficiency of the ZnO-polythiophene solar cell.     

籽晶层制备方式对氧化锌纳米棒阵列的影响

采用3种不同的方式制备ZnO薄膜籽晶层:旋涂、喷雾热解和脉冲激光沉积。对于每一种制备方式,其薄膜的晶体结构、形貌、表面粗糙度等性能分别用X射线衍射(XRD)、扫描电子显微镜(SEM)和原子力显微镜(AFM)进行了表征。之后,通过水热合成方法,在3种籽晶层衬底上制备得到具有不同结构和形貌特征的ZnO纳米棒阵列。结果表明,ZnO纳米棒生长和籽晶层制备方式具有极强的相关性。最后,对两者相关性的生长机理进行了解释。     

Performance enhancement of CdS nanorod arrays/P3HT hybrid solar cells via N719 dye interface modification

Improved hybrid solar cells consisting of vertical aligned cadmium sulfide (CdS) nanorod arrays and interpenetrating polythiophene (P3HT) have been achieved via modification of CdS nanorod surface by using conjugated N719 dye. The complete infiltration of P3HT between CdS nanorods interspacing was verified by scanning electron microscopy. By employing absorption and photoluminescence spectra, and current-voltage characterization the interaction between N719 molecules and CdS nanorods/P3HT interface was explored, and the role of N719 dye on the improvement of device performance was discussed.     

A quantum dot sensitized solar cell based on vertically aligned carbon nanotube templated ZnO arrays

We report on a quantum dot sensitized solar cell (QDSSC) based on ZnO nanorod coated vertically aligned carbon nanotubes (VACNTs). Electrochemical impedance spectroscopy shows that the electron lifetime for the device based on VACNT/ZnO/CdSe is longer than that for a device based on ZnO/CdSe, indicating that the charge recombination at the interface is reduced by the presence of the VACNTs. Due to the increased surface area and longer electron lifetime, a power conversion efficiency of 1.46% is achieved for the VACNT/ZnO/CdSe devices under an illumination of one Sun (AM 1.5G, 100 mW/cm²).     

Pt纳米花/ZnO复合阵列的制备及对甲醇氧化催化的研究

利用调控ZnO纳米棒阵列的疏水、亲水性,由电化学方法制备了Pt纳米花/ZnO(PtNF/ZnO)复合阵列.该复合阵列排列规则、尺寸均一、方向一致.每一根ZnO纳米棒的顶端都覆盖着由Pt纳米颗粒构成的Pt纳米花,具有大的比表面积.与以亲水性的ZnO纳米棒制得的覆盖Pt纳米颗粒的ZnO复合阵列(PtNP/ZnO)以及单独的Pt颗粒相比,PtNF/ZnO复合阵列对甲醇氧化具有更高的电化学催化活性.     

Tuning the Dimensions of ZnO Nanorod Arrays for Application in Hybrid Photovoltaics

ZnO nanorod arrays are a very eligible option as electron acceptor material in hybrid solar cells, owing to their favorable electrical properties and abundance of available, easy, and low‐cost synthesis methods. To become truly effective in this field, a major prerequisite is the ability to tune the nanorod dimensions towards optimal compatibility with electron‐donating absorber materials. In this work, a water‐based seeding and growth procedure is used to synthesize ZnO nanorods. The nanorod diameter is tuned either by modifying the zinc concentration of the seeding solution or by changing the concentration of the hydrothermal growth solution. The consequences of this morphological tailoring in the performance of hybrid solar cells are investigated, which leads to a new record efficiency of 0.82 % for hydrothermally grown ZnO nanorods of size 300 nm in combination with poly(3‐hexylthiophene‐2,5‐diyl) (P3HT). This improvement is attributed to a combined effect of nanorod diameter and orientation, and possibly to a better alignment of the P3HT backbone resulting in improved charge transport.     

Tuning of the charge and energy transfer in ternary CdSe/poly(3-methylthiophene)/poly(3-hexylthiophene) nanocomposite system

Composite CdSe:poly(3-methylthiophene) (P3MT) nanoparticles have been synthesized via polymerization of 3-methylthiophene (3MT) in the presence of CdSe particles of nanorod or dot-like morphology and dispersed in the poly(3-hexylthiophene) (P3HT) matrix. The effect of the P3MT layer to mediate charge and energy transfer between CdSe and P3HT in the ternary nanocomposite system has been studied using electronic absorption, photoluminescence spectroscopy, and current–voltage measurements. The energy level diagram of the composite system has been deduced based on optical and electrochemical data of the separate components of the system. The contribution of the low- and high-molecular fractions of P3MT to control the charge transfer in order to optimize the intermediary role of P3MT is analyzed. Particularly, it was shown that excitation of the low-molecular P3MT leads to energy transfer to both CdSe and P3HT components, and it also serves as a barrier against recombination of electrons and holes separated at CdSe and P3HT, respectively. Thus, the role of the P3MT interlayer in assisting the charge separation and increasing an open-circuit voltage in the photovoltaic cell based on the ternary system is demonstrated.     

Chemical‐Bonding‐Directed Hierarchical Assembly of Nanoribbon‐Shaped Nanocomposites of Gold Nanorods and Poly(3‐hexylthiophene)

Nanoribbon‐shaped nanocomposites composed of conjugated polymer poly(3‐hexylthiophene) (P3HT) nanoribbons and plasmonic gold nanorods (AuNRs) were crafted by a co‐assembly of thiol‐terminated P3HT (P3HT‐SH) nanofibers with dodecanethiol‐coated AuNRs (AuNRs‐DDT). First, P3HT‐SH nanofibers were formed due to interchain π–π stacking. Upon the addition of AuNRs‐DDT, P3HT‐SH nanofibers were transformed into nanoribbons decorated with the aligned AuNRs on the surface (i.e., nanoribbon‐like P3HT/AuNRs nanocomposites). Depending on the surface coverage of the P3HT nanoribbons by AuNRs, these hierarchically assembled nanocomposites exhibited broadened and red‐shifted absorption bands of AuNRs in nIR region due to the plasmon coupling of adjacent aligned AuNRs and displayed quenched photoluminescence of P3HT. Such conjugated polymer/plasmonic nanorod nanocomposites may find applications in fields, such as building blocks for complex superstructures, optical biosensors, and optoelectronic devices.     

Hierarchically Structured ZnO Nanorods as an Efficient Photoanode for Dye‐Sensitized Solar Cells

Hierarchical ZnO nanorods composed of interconnected nanoparticles, which were synthesized by controlling precursor concentrations in a solvothermally assisted process, were exploited as photoanodes in dye‐sensitized solar cells (DSCs). The as‐prepared hierarchical nanorods showed greatly enhanced light scattering compared to ZnO nanoparticles for boosting light harvesting while maintaining sufficient dye‐adsorption capability. The charge‐transfer characteristics were studied by electrochemical impedance measurements, and reduced electron recombination and longer electron lifetime were observed for the ZnO nanorods. Photovoltaic characterization demonstrated that DSCs utilizing the hierarchical nanorods significantly improved the overall conversion efficiency by 34 % compared to nanoparticle‐based DSCs.     

Comparison of two types of vertically aligned ZnO NRs for highly efficient polymer solar cells

Vertically aligned ZnO nanorods (NR) are prepared by two different syntheses methods and applied on polymer solar cells (PSCs). The ZnO electrodes work as the electron transport layer with the P3HT:PCBM blend acting as the active material. Several organic blend solution conditions are optimized: concentration, solvent, and deposition speed. The effect of different NR electrode morphologies is analyzed on the solar cell performance and characterized by current–voltage curves and IPCE analyses. The photovoltaic performance of the solar cells was observed to be influenced by many factors, among them infiltration of the organic P3HT:PCBM blend within the ZnO NR layer. The infiltration of the active layer was monitored by cross section SEM and energy dispersive X-ray spectroscopy analyses. Our results show that higher power conversion efficiencies are achieved when shorter NRs lengths are applied. The best power conversion efficiency obtained was 2.0% for a 400 nm ZnO NR electrode. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Photovoltaic Performance and Charge Recombination Dynamics of P3HT/PCBM Blend Heterojunction

We prepared the polymer solar cell based on poly（3-hexylthiophene）（P3HT）/fullerene derivative PCBM（PCBM=[6,6]-phenyl-C61-butyric acid methyl ester） heterojunction and investigated the irradiation intensi- ty-dependent charge recombination dynamics of heterojunction employing nanosecond transient absorption spectroscopy with bias light so as to simulate the photophysical process in heterojunction when the photovoltaic device is on operation. The experimental data exhibit that the yield of free charges gradually decreases and the loss of mobile carriers originated from bimolecular recombination simultaneously increases as the irradiation intensity gradually enhances. This indicates that the polymer solar cell is much suitably used at a low irradiation intensity.     

Surface tension and fluid flow driven self-assembly of ordered ZnO nanorod films for high-performance field effect transistors

Colloidal nanorods of inorganic semiconductors are of interest for a range of optoelectronic devices. The ability to self-assemble these materials into ordered arrays by solution-processing techniques is crucial for achieving adequate device performance. Here we show that uniform ZnO nanorod films with defined nanorod alignment can be solution-deposited over large areas by controlling the surface energy of the nanorods through the choice of suitable ligands and by the fluid flow direction during growth. ZnO nanorods with long carbon chain ligands exhibit a smaller surface free energy than those with short carbon chain ligands resulting in better in-plane alignment and large domain sizes up to dozens of micrometers in spin-coated films. A model is presented to rationalize the observed self-assembly behavior. It is based on the formation of a lyotropic liquid crystalline phase on the surface of the liquid film which is facilitated by enhanced segregation of nanorods with low surface tension to the surface. Alignment of the nanorods is controlled by radial and vertical liquid flows in the drying solution. The ability to control the orientation of the nanorods and to achieve large domain size results in significant device performance improvement. Field-effect transistors with mobilities of up to 1.2-1.4 cm2/V.s are demonstrated in spin-coated, in-plane aligned ZnO nanorod films subject to postdeposition hydrothermal growth.     

ZnO纳米粒子结构对光电量子限域特性的影响

Zn O作为一种宽禁带 (3 .3 6e V)高激子结合能 (60 me V)的半导体材料已引起人们的关注 .Zn O纳米粒子的比表面积较大 ,表面活性较高 ,对周围环境敏感 ,使其成为传感器制作中最有前途的材料[1] ,还在太阳能转换[2 ] 、发光材料[3] 、半导体表面修饰与敏化[4 ] 、纳米电子学以及分子电子学器件[5] 等领域显示出广阔的应用前景 .制约这些应用的关键是 Zn O纳米粒子表面和界面的电子结构和电荷转移行为 ,但有关此方面的报道较少 .本文用溶胶 -凝胶法制备了不同粒径的 Zn O纳米粒子 ,应用表面光电压谱 (SPS)和场诱导表面光电压谱 (FISPS…     

CdS nanocrystallites sensitized ZnO nanorods with plasmon enhanced photoelectrochemical performance

A novel architecture of CdS/ZnO nanorods with plasmonic silver (Ag) nanoparticles deposited at the interface of ZnO nanorods and CdS nanocrystallites, was designed as a photoanode for solar hydrogen generation, with photocurrent density achieving 4.7 mA/cm² at 1.6 V (vs. RHE), which is 8 and 1.7 times as high as those of pure ZnO and CdS/ZnO nanorod films, respectively. Additionally, with optical absorption onset extended to ～660 nm, CdS/Ag/ZnO nanorod film exhibits significantly increased incident photo-to-current efficiency (IPCE) in the whole optical absorption region, reaching 23.1% and 9.8% at 400 nm and 500 nm, respectively. The PEC enhancement can be attributed to the one-dimensional ZnO nanorod structure maintained for superior charge transfer, and the extended visible-light absorption of CdS nanocrystallites. Moreover, the incorporated plasmonic Ag nanoparticles could further promote the interfacial charge carrier transfer process and enhance the optical absorption ability, due to its excellent plasmon resonance effect.