改性多壁碳纳米管/聚乳酸复合材料的研究

制备了改性多壁碳纳米管/聚乳酸复合材料,研究了改性多壁碳纳米管对聚乳酸的增强作用.通过拉曼光谱分析、热重分析证实了多壁碳纳米管酸化酯化反应的发生.通过溶液法制备了聚乳酸/改性多壁碳纳米管复合物.考察了聚乳酸和改性多壁碳纳米管复合体系的相容性.扫描电镜分析结果说明了聚乳酸和改性多壁碳纳米管复合物相容性的变化.随着改性多壁碳纳米管在复合物中含量的增加,体系的分散效果也越好,相容性也有提高.实验结果表明,在聚乳酸材料中添加改性碳纳米管材料到一定值对,可以提高材料的力学性能,且当改性碳纳米管添加量达到1.5％的时候材料力学性能达到了一个最大值,拉伸强度可达120.4MPa.     

PVA/DTC纳米纤维的制备及对铅离子的吸附行为

通过高压静电纺丝技术制备了聚乙烯醇/聚乙烯亚胺(PVA/PEI)纳米纤维膜, 对纤维膜进行功能化使其转化为对重金属离子具有高络合能力的聚乙烯醇/二硫代氨基甲酸盐功能化聚乙烯亚胺(PVA/DTC)纳米纤维膜. 研究了PVA/PEI纳米纤维膜的交联和功能化以及PVA/DTC纤维膜对铅离子的吸附行为. 结果表明, 高压静电纺丝法可制备出纤维直径分布均匀、 形貌良好的纳米纤维膜, 且交联、 功能化后仍能保持蓬松纳米纤维状的网状结构. PVA/DTC纳米纤维膜对铅离子吸附速率快, 吸附量容量高, 且具有良好的再生吸附能力, 是一种潜在的重金属离子高效吸附材料.     

静电纺微量串珠纤维复合滤料的制备及过滤性能探究

以聚偏氟乙烯(PVDF)为原材料,以PET熔喷非织造布为接收基材,通过静电纺丝技术制备了微量串珠纤维复合滤料,利用扫描电子显微镜(SEM)观察纺丝液浓度、纺丝电压、纺丝距离对纤维形貌的影响,并研究了静电纺丝时间对复合滤料过滤性能的影响。结果表明,工艺参数最优组合为:纺丝液质量分数20%,纺丝电压38 kV和纺丝距离25 cm,并且各纺丝时间的复合滤料样品都表现出极高的过滤效率和较低的过滤阻力,综合考虑,优选纺丝时间为5min时,复合滤料可达到最佳的过滤性能。     

静电纺丝技术制备聚苯乙烯/石墨烯复合纳米纤维

通过静电纺丝技术制备了聚苯乙烯/石墨烯复合纳米纤维膜,利用扫描电子显微镜、傅里叶变换红外光谱、粉末X-射线衍射和激光拉曼光谱等技术对所制备的纤维膜结构和组成进行表征,并通过电化学法考察该复合纳米纤维膜的电活性。结果表明,石墨烯已掺杂到聚苯乙烯纤维中。与聚苯乙烯纤维膜相比,聚苯乙烯/石墨烯复合纳米纤维膜导电性能增强,表明本实验成功实现了对聚苯乙烯纤维的改性。     

硫化锌掺锰/聚乙烯醇复合纳米纤维的制备与表征

利用静电纺丝法与气固反应相结合, 成功地制备了硫化锌掺锰/聚乙烯醇复合纳米纤维, 并对所制备的复合物进行了表征, 探讨了复合物的结构及其性能.     

磷钼酸/PMMA静电纺丝纤维的制备及形貌研究

通过静电纺丝技术制备了磷钼酸/PMMA复合纤维,研究了PMMA的相对分子质量、磷钼酸的含量及混合溶剂中DMF与乙醇的体积比对复合纤维形貌及直径的影响。通过扫描电镜(SEM)对复合纤维的形貌进行了观察,并测试了不同条件纺丝溶液的电导率、黏度和表面张力。研究发现,PMMA的相对分子质量和DMF与乙醇的体积比对复合纤维的形貌影响较为明显,磷钼酸的含量对复合纤维的直径影响显著。较为理想的纺丝条件为:PMMA的重均分子量为60000,纺丝液中磷钼酸的含量为16mg/mL,DMF与乙醇的体积比为6∶4。     

CdHgTe纳米晶/聚乙烯醇近红外纳米纤维的制备

采用一步法制备了性质稳定的CdHgTe纳米晶, 将其与聚乙烯醇水溶液共混, 通过静电纺丝方法获得了CdHgTe纳米晶/聚乙烯醇纳米纤维. 改变聚乙烯醇水溶液的浓度可以使纤维的直径在200~400 nm范围内可调. 所制备的纳米纤维在近红外区域具有很强的荧光, 而且发光峰位与原水相纳米晶的峰位基本一致, 这是采用其它方法制备纳米晶与聚合物的复合材料难以实现的. 通过与聚乙烯醇的复合, 纳米晶的热稳定性得到进一步增强, 在120 ℃下将纳米纤维加热2 h, 其形貌和发光性质都未发生明显的变化.     

聚乙烯醇明胶混合水溶液的静电纺丝

将聚乙烯醇与明胶混合水溶液进行静电纺丝,制备了聚乙烯醇与明胶混合超细纤维及其电纺膜,研究了混合纺丝液的组成对纺丝液的粘度、表面张力和电导率的影响,观察了纤维的微观形貌,并对电纺膜进行了差示扫描量热测定.结果表明:当混合液中明胶含量小于20 9/6时,静电纺丝可以稳定进行.随着明胶含量由5%逐渐增加至25%,混合超细纤维的平均直径先是由260nm逐渐下降至207 nm而后又逐渐增加至320 nm.明胶的含量低于15%时,不影响其混合电纺膜中PVA的结晶.     

静电纺丝素/胶原/聚合物复合纤维的制备及其力学性能的研究

目前,将天然高分子蛋白和聚合物共混利用静电纺丝法制作各种组织工程支架材料倍受关注。基于这种研究背景,在本文中利用静电纺丝技术,制备了丝素(SF)/胶原(COL)/聚左旋乳酸(PLLA)和SF/COL/聚左旋乳酸-己内酯(PLCL)两种共混复合纤维膜,通过扫描电镜(SEM)对纤维形态结构分析,发现复合纤维形貌良好,直径较为均一。同时改变纺丝液中高分子蛋白的比例,复合纤维的直径也随之减小。此外,对复合纤维进行了力学性能测试,发现随着聚合物含量的增加,复合纤维膜的力学性能得以改善,SF/COL/PLCL组复合纤维的拉伸性能明显优于SF/COL/PLLA组。     

静电纺丝制备醋酸纤维素复合纳米纤维的研究进展

静电纺丝技术就是通过带电聚合物溶液或熔体的喷射来制备纳米纤维,是一种制备纳米纤维材料简单有效的技术。醋酸纤维素(CA)易溶于有机溶剂,常作为纤维素的替代材料应用于静电纺丝领域。本文总结了近年来国内外采用静电纺丝技术制备CA复合纳米纤维的研究新进展,重点介绍了CA/CNTs复合纳米纤维、CA/金属粒子复合纳米纤维、CA/金属氧化物复合纳米纤维、CA基载药复合纳米纤维、CA/PAN复合纳米纤维、CA/PVA复合纳米纤维、CA/CS复合纳米纤维等CA复合纳米纤维的研究进展以及潜在的应用领域。     

PVA微晶交联和SA/PAA双网络协效增强增韧SA纤维

为了提高海藻酸钠(SA)纤维的断裂强度和断裂伸长率, 以丙烯酸(AA)为化学交联组分, SA为离子交联组分, 聚乙烯醇(PVA)为微晶交联组分, 采用湿法纺丝和冻融循环方法制备含有PVA微晶交联点和海藻酸钠/聚丙烯酸(SA/PAA)双网络结构的海藻酸钠/聚丙烯酸/聚乙烯醇(SA/PAA/PVA)复合纤维. 通过流变性能、 力学性能、 红外光谱、 X射线衍射仪(XRD)和扫描电子显微镜(SEM)测试研究了交联剂N,N-亚甲基双丙烯酰胺(MBA)含量和PVA微晶交联对SA/PAA/PVA纺丝原液和复合纤维的结构与性能的影响. 结果表明, 当MBA质量分数为0.5%时, 纺丝原液的损耗模量(G″)最小, 可纺性最好, 复合纤维的断裂强度达到2.83 cN/dtex, 断裂伸长率达到9.38%, 比再生SA纤维分别提高了15.98%和38.96%; PVA冷冻之后形成微晶交联点并且PAA和PVA已经复合到体系中; PAA和PVA的加入提高了复合纤维的结晶度; 复合纤维的表面形貌趋于光滑和规整, 纤维断面更加致密.     

Fiber‐forming blend polypropylene‐polyvinyl alcohol

The preparation of a fiber‐forming blend consisting of polypropylene and polyvinyl alcohol mixed with glycerol and with polypropylene grafted with maleic anhydride were studied. The physical and mechanical properties of blend fibers were also studied. The rheological measurements for semiquantitative evaluation of technological compatibility of the components and for processing the polymeric material in extruding and spinning process were carried out. The experimental results revealed the technological compatibility of the polypropylene‐polyvinyl alcohol blend in the presence of glycerol and polypropylene grafted with maleic anhydride. The colloidal structure of interface layer is assumed to be in a three‐ or four‐component system. The mixture of polyvinyl alcohol with glycerol allows for the preparation of well spun fiber‐forming polypropylene blends. Polypropylene‐polyvinyl alcohol blend fibers consisting of up to 20% polyvinyl alcohol with sufficient mechanical properties, higher porosity and significantly higher sorption of water than polypropylene fibers alone were prepared. Copyright © 2001 John Wiley & Sons, Ltd.     

静电纺丝法制备复合纳米材料

经由溶胶-凝胶法过程,应用静电纺丝机原理,以聚乙烯醇(PVA)和无机盐(LiMn2O4)为前驱物,制备出了含有LiMn2O4无机组分的复合纳米纤维,为复合无机纳米纤维的制备方式供给了一条新的思路。实验中系统地研究了PVA的浓度对其所形成的纤维描摹特征的影响。PVA水溶液用于纺丝的最好质量分数约为8.0%。在实验过程中,随着PVA质量分数的渐渐增加,其所形成纤维的直径也随之渐渐增大,而溶液的黏度也在逐步增大,这就使得溶剂挥发变得越来越难,小液珠的表面难以构成理想的“泰勒锥”,电压过小,样品溶液无法纺丝,在针头处成水滴状落在针头下方。电压过大则会在纤维丝上呈现念珠形态,阻碍样品电纺时的形貌。实验表明,在施加18kV的高电压,默认机器的其它设定条件下,依托不同质量分数的PVA溶液可制备出三种不同的纤维。     

Novel mechanism for spinning continuous twisted composite nanofiber yarns

Highly aligned and twisted composite Nylon 6 nanofibers incorporating multiwall carbon nanotubes (MWCNTs) were successfully electrospun, using a novel mechanism. It has been found that; ultrasound combined with high speed shearing is the simplest and most convenient method to improve the dispersion of MWCNTs into a polymer matrix with a certain loading. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were conducted to characterize the morphology of nanofibers, the dispersion of MWCNTs and their alignment inside the fiber body. By manipulating the electrical forces during electrospinning and applying mechanical stretching to the electrospun nanofibers, high polymer chain orientation and better alignment of the MWCNTs particles along the fiber axis was achieved. Twist was applied to the nanofibers for providing the required inter fiber lateral cohesion interaction and friction thus, spinning a continuous twisted composite yarn. SEM images show twisted yarns with diameters ranging between 5 and 10 μm. The twist effect of the parallel bundle was investigated by controlling the twist per unit length using a motor speed controller at values of 100, 250, 500, 750 and 1000 rpm. The paper also provides a comprehensive review of various yarn spinning mechanisms of electrospun nanofibers.     

碳纳米管改性聚苯硫醚熔纺纤维的结构与性能研究

将多壁碳纳米管(MWCNTs)和聚苯硫醚(PPS)经过熔融挤出后制备成复合材料切片,并采用熔融纺丝法制得碳纳米管改性聚苯硫醚复合纤维.采用扫描电镜(SEM)、拉曼光谱、示差扫描量热分析(DSC)、动态机械分析(DMA)以及力学性能测试等表征手段研究了复合纤维中碳管的分散状态,与基体的界面作用,复合纤维的结晶性能以及力学性能,从而探讨了聚苯硫醚/碳纳米管复合纤维体系的微观结构与宏观性能之间的关系.研究表明,聚苯硫醚分子结构与碳纳米管之间具有的π-π共轭作用使碳管较为均匀的分散在基体中,界面结合较为紧密.同时熔融纺丝过程中的拉伸作用使碳管进一步解缠并使碳管沿纤维拉伸方向取向.另一方面,拉曼光谱显示拉伸作用有效地增强了界面作用,有利于外界应力的传递.碳管的良好分散以及强的界面作用使复合纤维力学性能得到大幅度的提高,当碳管含量达到5 wt%时,复合纤维的模量有了明显的提高,拉伸强度较纯PPS纤维提高了近220%.     

Highly efficient catalytic performances of nitro compounds via hierarchical PdNPs-loaded MXene/polymer nanocomposites synthesized through electrospinning strategy for wastewater treatment

The problem of water pollution has become increasingly serious,and it has already threatened the survival of mankind and has become an obstacle to the healthy development of human health.Here,we prepared a novel polyvinyl alcohol(PVA)/polyacrylic acid(PAA)/MXene fiber membrane by electrospinning.After heat treatment of film and subsequent modification with Pd nanoparticles,PVA/PAA/MXene@PdNPs composite nanofiber membrane with high specific surface area and excellent catalytic performance was finally prepared.The uniform distribution of MXene sheets in the composite fiber membrane not only solves the problem that the MXene sheet is not easy to be monolayerized,but also can grow the self-reduced Pd nanoparticles on the MXene sheets.In addition,the composite nanofiber membrane exhibits excellent catalytic ability and cycle stability for 4-nitrophenol(4-NP) and 2-nitrophenol(2-NA),providing new strategy for the study of catalytic composite materials related to degradation of wastewater.     

金纳米棒负载的静电纺丝纤维的制备及其表面增强拉曼光谱性能

为简单有效地制备高活性表面增强拉曼光谱(Surface-enhanced Raman Spectroscopy,SERS)基底。本文采用静电纺丝聚乙烯醇(PVA)/聚丙烯酸(PAA)纳米纤维为支撑材料,通过直接浸泡的方法,利用金纳米棒与电纺纤维之间的静电力,使纳米棒在纤维表面自组装,得到了性能优异的SERS基底。通过透射电子显微镜、扫描电子显微镜对金纳米棒以及不同状态下的电纺纤维的形貌进行表征,结果表明,金纳米棒均匀且密集地负载在纤维表面。通过设置不同的浸泡时间确定了金纳米棒组装平衡的时间为12 h,并通过调控纺丝时间和金纳米棒的浓度发现随着纺丝时间和金纳米棒浓度的增加,复合纤维膜SERS增强效果随之提升。该复合纤维膜具有优异的SERS均匀性,并且能够检测到浓度低至10~(-10)mol/L的4-氨基苯硫酚的存在。     

Synthesis of hemocompatible materials based on branched polyvinyl alcohol

The possibility of modification of polyvinyl alcohol with epichlorohydrin was examined with the aim of preparing hemocompatible materials exhibiting high mechanical density at limited swellability. The conditions of modification and preparation of branched polyvinyl alcohol and of hemocompatible hydrogel systems with improved operation properties were determined.     

The improvement in interfacial shear strength of wood fiber/epoxy composite by sizing with epoxy sizing agent containing MWCNTs

This paper discloses a feasible and high efficient strategy for wood fiber treatment to introducing multi‐wall carbon nanotubes (MWCNTs) to the surface of wood fibers for the aim of improving the interfacial shear strength of wood fiber/epoxy composite. Briefly, a layer of MWCNT was deposited on wood fibers through sizing wood fibers with epoxy sizing agent containing amine‐treated MWCNTs (MWCNT‐PEI). The surface functional groups, morphology, wettability, and interphase properties of MWCNTs on the surface of wood fiber were studied. The remarkable enhancements were achieved in interfacial shear strength of reinforced composites by dipping wood fiber in MWCNTCOOH suspension and wood fiber sizing containing MWCNT‐PEI.     

Microwave-assisted synthesis of composite sorbents on the basis of silica modified by polyvinyl alcohol

The synthesis of composite sorbents from porous silica modified by polyvinyl alcohol was studied. The initial silica retained its porosity after modification which was performed by application of polyvinyl alcohol from aqueous solution. The subsequent thermal or microwave treatment gave nanolayers of water-resistant polyvinyl alcohol. Microwave irradiation was found to be more advantageous than conventional thermal treatment from the viewpoint of the polymeric phase and sorbent parameters. Sorption properties of the resulting sorbents with respect to protein, oligonucleotide, and dyes were studied.