一种新型氧化还原电解液电化学电容器体系

以含有Fe3+/Fe2+离子对的H2SO4溶液为电解液, 以多孔炭做电极材料, 就Fe3+/Fe2+离子对在多孔炭纳米孔隙中的电化学行为及准电容效应进行了探讨. 循环伏安测试结果表明, Fe3+/Fe2+离子对在多孔炭电极纳米孔隙中发生了可逆的电化学反应. 恒流充放电结果发现, 加入Fe3+/Fe2+使得充放曲线出现对称的充放电平台, 有效地提高了电化学电容器(EC)的电能存储容量, 其单电极比电容最高达174 mAh•g−1, 比单纯的H2SO4电解液的比电容高109 mAh•g−1, 且有着良好的循环稳定性. 根据实验现象及结果, 探讨了Fe3+/Fe2+离子对在EC电极上的充放电机理, 并提出了一种新的概念——氧化还原电解液电化学电容器.     

Synthesis and electrochemical characterization of carbon nanotubes decorated with nickel nanoparticles for use as an electrochemical capacitor

Attachment of nickel nanoparticles on multiwalled carbon nanotubes (MWCNTs) was conducted to explore the influence of Ni loading on the electrochemical capacitance of MWCNT electrodes. A chemical impregnation leaded to homogeneously disperse Ni particles onto the surface of MWCNTs, and the Ni particles were found to be an average size of 30–50 nm. The capacitive behavior of the MWCNT electrodes was investigated in 6 M KOH, by using cyclic voltammetry (CV), charge–discharge cycling, and ac electrochemical impedance spectroscopy. CV measurements showed that the Faradaic current was found to increase with the Ni coverage, indicating that the presence of Ni would enhance the pseudocapacitance through the redox process. Equivalent circuit analysis indicated that both of electrical connection and charge transfer resistances accounted for the major proportion of the overall resistance and were found to decrease with the amount of nickel. A linearity relationship between the total capacitance and the Ni population reflected that each Ni particle exhibits an identical electrochemical activity in enhancing the electrochemical capacitance. The overall electrochemical capacitance (including double layer capacitance and pseudocapacitance) of Ni-MWCNT electrode can reach a maximum of 210 F/g over 500 cycles.     

Voltammetry at a de Levie brush electrode as a model for electrochemical supercapacitor behaviour

Electrochemical supercapacitors provide electrical energy storage systems complementary to batteries. Based on the double layer capacitance of high area porous electrode materials, e.g. carbon powders, felts, foams, aerogels or on the redox pseudocapacitance of oxide or polymer films, specific capacitances of the order of 50100 F g⁻¹ are realizable. However, the porous nature of the electrode structures introduces a distribution of resistive and capacitative elements giving rise to electrical behaviour like that of a transmission line, as treated by de Levie, with a resulting complex power spectrum depending on charging or discharging rates. The present paper examines the cyclic voltammetry behaviour of de Levie type wire brush electrodes as models for porous electrodes, in comparison with that of single wire electrodes of the same metal. Comparisons are also made with constant current charging behaviour and with the electrochemical behaviour of specially made, 3 V, non aqueous solution, double layer capacitor modules, examined under similar conditions in relation to the current response profiles of a 5 RC element hardware model circuit. These approaches enable the effects of the distribution of R and C elements on charge acceptance and delivery at various rates to be quantitatively evaluated for various resistivities of the conducting electrolyte in pores.     

电解液离子与炭电极双电层电容的关系

以酚醛树脂基纳米孔玻态炭(NPGC)为电极, 通过微分电容伏安曲线的测试, 研究了水相体系电解液离子与多孔炭电极双电层电容的关系. 结果表明, 稀溶液中, 多孔炭电极的微分电容曲线在零电荷点(PZC)处呈现凹点, 电容降低, 双电层电容受扩散层的影响显著；若孔径小, 离子内扩散阻力大, 电容下降更为迅速, 扩散层对双电层电容的影响增大. 而增大炭材料的孔径或电解液浓度, 可明显减弱甚至消除扩散层对电容的影响. 炭电极的单位面积微分电容高, 仅表明孔表面利用率高, 如欲获得高的电容量, 还要有大的比表面积. 离子水化对炭电极的电容产生不利影响, 选用大离子和增大炭材料的孔径, 可有效降低离子水化对炭电极电容性能的影响.     

硫酸溶液中电化学改性石墨电极对Fe3+/Fe2+的电催化性能与准电容特性

通过循环伏安(CV)、恒电流充放电和电化学阻抗谱(EIS)等测试方法,研究了电化学改性石墨电极对硫酸溶液中Fe3+/Fe2+的电催化性能与准电容特性.结果表明:由于电化学改性石墨电极表面存在大量的含氧活性官能团,使其对Fe3+/Fe2+的氧化还原反应具有极高的电催化性能,并具有可逆反应过程特征.在含有0.5mo·lL-1Fe3++0.5mo·lL-1Fe2+的2.0mo·lL-1H2SO4溶液中,其表观面积比电容是不含铁离子硫酸溶液的1.808倍,达到2.157F·cm-2;同时,铁离子浓度的增大也能够进一步提高其电容量.Fe3+/Fe2+电对的加入增加了充放电时间,有效提高了电化学电容器(EC)的电容存储容量和高功率特性.电化学阻抗谱测试同样证实体系具有明显的电容特性.因此,可以利用电化学改性石墨电极表面的含氧活性官能团和溶液中Fe3+/Fe2+的氧化还原特性来共同储存和释放能量.     

Investigation of Ig.G adsorption and the effect on electrochemical responses at titanium dioxide electrode

The adsorption of Immunoglobulin G on a titanium dioxide (TiO(2)) electrode surface was investigated using (125)I radiolabeling and electrochemical impedance spectroscopy (EIS). (125)I radiolabeling was used to determine the extent of protein adsorption, while EIS was used to ascertain the effect of the adsorbed protein layer on the electrode double layer capacitance and electron transfer between the TiO(2) electrode and the electrolyte. The adsorbed amounts of Ig.G agreed well with previous results and showed approximately monolayer coverage. The amount of adsorbed protein increased when a positive potential was applied to the electrode, while the application of a negative potential resulted in a decrease. Exposure to solutions of Ig.G resulted in a decrease of the double layer capacitance (C) and an increase in the charge-transfer resistance (R(2)) at the electrode solution interface. As more Ig.G adsorbed onto the electrode surface, the extent of C and R(2) variation increased. These capacitance and charge-transfer resistance variations were attributed to the formation of a proteinaceous layer on the electrode surface during exposure.     

Electrochemistry at nanoporous interfaces: new opportunity for electrocatalysis

Physical and electrochemical features of nanoporous electrodes arising from their morphology are presented in this perspective. Although nanoporous electrodes have been used to enhance electrocatalysis for several decades, the origin of their capability was understood on the basis of enlarged surface area or crystalline facet. However, considerable attention should be paid to the fact that nano-confined space of nanoporous electrodes can significantly affect electrochemical efficiency. Molecular dynamics in nano-confined spaces is capable of offering much more chances of interaction between a redox molecule and an electrode surface. The mass transport in the nanoporous electrode depends on various pore characteristics such as size, shape, charge, connectivity, and symmetry as well as molecular properties such as size, charge, and kinetics. Moreover, when the pore size is comparable to the thickness of an electric double layer (EDL), the EDLs overlap in the porous structure so that electrochemically effective surface area is not the same as that of the real electrode surface. These unique properties come from simply nanoporous structure and suggest new opportunity to innovative electrocatalysts in the future.     

Electrochemical Double‐Layer Capacitor Energized by Adding an Ambipolar Organic Redox Radical into the Electrolyte

Carbon‐based electrochemical double‐layer capacitors (EDLCs) generally exhibit high power and long life, but low energy density/capacitance. Pore/morphology optimization and pseudo‐capacitive materials modification of carbon materials have been used to improve electrode capacitance, but leading to the consumption of tap density, conductivity and stability. Introducing soluble redox mediators into electrolyte is a promising alternative to improve the capacitance of electrode. However, it is difficult to find one redox mediator that can provide additional capacitance for both positive and negative electrodes simultaneously. Here, an ambipolar organic radical, 2, 2, 6, 6‐tetramethylpiperidinyloxyl (TEMPO) is first introduced to the electrolyte, which can substantially contribute additional pseudo‐capacitance by oxidation at the positive electrode and reduction at the negative electrode simultaneously. The EDLC with TEMPO mediator delivers an energy density as high as 51 Wh kg^?1, 2.4 times of the capacitor without TEMPO, and a long cycle stability over 4000 cycles. The achieved results potentially point a new way to improve the energy density of EDLCs.     

溶菌酶在裸金电极和疏基乙酸或正十二疏烷基醇修饰电极上的吸附

电化学石英晶体阻抗系统;疏基乙酸;溶菌酶在裸金电极和疏基乙酸或正十二疏烷基醇修饰电极上的吸附     

Introducing hydrophilic carbon nanoparticles into hydrophilic sol-gel film electrodes

A hydrophilic carbon nanoparticle–sol-gel electrode with good electrical conductivity within the sol-gel matrix is prepared. Sulfonated carbon nanoparticles with high hydrophilicity and of 10–20 nm diameter (Emperor 2000) are co-deposited onto tin-doped indium oxide substrates employing a sol-gel technique. The resulting carbon nanoparticle-sol-gel composite electrodes are characterized as a function of composition and salt (KCl) additive. Scanning electron microscopy and voltammetry in the absence and in the presence of a solution redox system suggest that the composite electrode films can be made electrically conducting and highly porous to promote electron transport and transfer. The effect of the presence of hydrophilic carbon nanoparticles is explored for the following processes: (1) double layer charging, (2) diffusion and adsorption of the electrochemically reversible solution redox system 1,1′-ferrocenedimethanol, (3) electron transfer to the electrochemically irreversible redox system hydrogen peroxide, and (4) electron transfer to the redox liquid tert-butylferrocene deposited into the porous composite electrode film. The extended electrochemically active hydrophilic surface area is beneficial in particular for surface sensitive processes (1) and (3), and it provides an extended solid|organic liquid|aqueous solution boundary for reaction (4). The carbon nanoparticle–sol-gel composite electrodes are optimized to provide good electrical conductivity and to remain stable during electrochemical investigation.     

Carbon materials for supercapacitor application

The most commonly used electrode materials for electrochemical capacitors are activated carbons, because they are commercially available and cheap, and they can be produced with large specific surface area. However, only the electrochemically available surface area is useful for charging the electrical double layer (EDL). The EDL formation is especially efficient in carbon pores of size below 1 nm because of the lack of space charge and a good attraction of ions along the pore walls. The pore size should ideally match the size of the ions. However, for good dynamic charge propagation, some small mesopores are useful. An asymmetric configuration, where the positive and negative electrodes are constructed from different materials, e.g., activated carbon, transition metal oxide or conducting polymer, is of great interest because of an important extension of the operating voltage. In such a case, the energy as well as power is greatly increased. It appears that nanotubes are a perfect conducting additive and/or support for materials with pseudocapacitance properties, e.g. MnO(2), conducting polymers. Substitutional heteroatoms in the carbon network (nitrogen, oxygen) are a promising way to enhance the capacitance. Carbons obtained by one-step pyrolysis of organic precursors rich in heteroatoms (nitrogen and/or oxygen) are very interesting, because they are denser than activated carbons. The application of a novel type of electrolyte with a broad voltage window (ionic liquids) is considered, but the stability of this new generation of electrolyte during long term cycling of capacitors is not yet confirmed.     

Electrochemistry,ion adsorption and dynamics in the double layer: a study of NaCl(aq) on graphite

Graphite and related sp² carbons are ubiquitous electrode materials with particular promise for use in e.g., energy storage and desalination devices, but very little is known about the properties of the carbon–electrolyte double layer at technologically relevant concentrations. Here, the (electrified) graphite–NaCl(aq) interface was examined using constant chemical potential molecular dynamics (CμMD) simulations; this approach avoids ion depletion (due to surface adsorption) and maintains a constant concentration, electroneutral bulk solution beyond the surface. Specific Na⁺ adsorption at the graphite basal surface causes charging of the interface in the absence of an applied potential. At moderate bulk concentrations, this leads to accumulation of counter-ions in a diffuse layer to balance the effective surface charge, consistent with established models of the electrical double layer. Beyond ∼0.6 M, however, a combination of over-screening and ion crowding in the double layer results in alternating compact layers of charge density perpendicular to the interface. The transition to this regime is marked by an increasing double layer size and anomalous negative shifts to the potential of zero charge with incremental changes to the bulk concentration. Our observations are supported by changes to the position of the differential capacitance minimum measured by electrochemical impedance spectroscopy, and are explained in terms of the screening behaviour and asymmetric ion adsorption. Furthermore, a striking level of agreement between the differential capacitance from solution evaluated in simulations and measured in experiments allows us to critically assess electrochemical capacitance measurements which have previously been considered to report simply on the density of states of the graphite material at the potential of zero charge. Our work shows that the solution side of the double layer provides the more dominant contribution to the overall measured capacitance. Finally, ion crowding at the highest concentrations (beyond ∼5 M) leads to the formation of liquid-like NaCl clusters confined to highly non-ideal regions of the double layer, where ion diffusion is up to five times slower than in the bulk. The implications of changes to the speciation of ions on reactive events in the double layer are discussed.

CμMD reveals multi-layer electrolyte screening in the double layer beyond 0.6 M, which affects ion activities, speciation and mobility; asymmetric charge screening explains concentration dependent changes to electrochemical properties.     

Determination of the Real Surface Area of Palladium Electrode

Four methods, including voltammetric measurement of double layer capacitance, surface oxides reduction, under potential deposition of Cu and carbon monoxide (CO) stripping have been applied to evaluate the real surface area of a polycrystalline Pd (pc-Pd) electrode. The results reveal that the second and third methods lead to consistent results with deviations below 5%. And from the determined double layer capacitance and CO stripping charge, it is deduced that the double layer capacity unit area is 23.1±0.4 μF/cm² and the saturated CO adlayer should be ca. 0.66 ML in order to ensure that the real surface area as determined isconsistent with the other two techniques. The applicability as well as the attentions when applying these techniques for the determination of the real surface area of pc-Pd electrodes have been discussed.     

The diamond/aqueous electrolyte interface: an impedance investigation

We have investigated the electrochemical interface between diamond electrodes and aqueous electrolytes using electrochemical techniques such as cyclic voltammetry and ac impedance spectroscopy. High-quality CVD-grown boron-doped polycrystalline diamond electrodes and IIa single crystalline natural diamond electrodes have been used in this study. In the case of hydrogen-terminated diamond electrodes, the electrochemical interface is dominated by the electrochemical double layer. Frequency-dependent impedance spectroscopy reveals a potential regime in which the contribution of ion adsorption becomes relevant. We have conducted experiments to evaluate the effect of pH and ionic strength on the double layer. Our results suggest that only ions resulting from water auto-dissociation, i.e., hydroxide and hydronium ions, are responsible for ion adsorption and, thus, able to modify the charge at the double layer. In contrast, no effect of the adsorption of several dissolved ions (such as Na+, K+, Cl-) has been observed On the basis of the electrochemical characterization of H-terminated diamond surfaces, we also discuss the phenomenon of the surface conductivity in diamond, as well as the pH sensitivity of the diamond surface. The influence of the O2/OH- and H2/H3O+ redox couples on the origin of the surface conductivity is discussed.     

Adsorption characteristics of electrodes containing nanostructured carbon of different morphology

The effect of camphor adsorption on the differential capacitance of electrodes of nanostructured carbon of different morphology (single-walled carbon nanotubes, filiform carbon, and columnar structures) in aqueous electrolyte solutions and also on the electrochemical reactions in these systems is studied. It is shown that irrespective of the ac frequency, the differential capacitance of the nanopaper and columnar electrodes increases 3–5-fold throughout the studied potential range. This experimental fact is explained by the substantial increase in the electrode surface accessible for electrolyte, which is a manifestation of the Rehbinder effect in electrochemistry. The revealed different kinds of effects of camphor adsorption layers formed at the nanostructured carbon/electrolyte interface on the electron transfer processes are as follows: partial inhibition of both the electron injection and the K₃[Fe(CN)₆] reduction; complete suppression of the reduction of sodium nitrate and nitrite; the absence of effects on the OH radical reduction and solvated electron oxidation.     

Core‐Shell Structured Cobalt Sulfide/Cobalt Aluminum Hydroxide Nanosheet Arrays for Pseudocapacitor Application

The direct synthesis of nanostructured electrode materials on three‐dimensional substrates is important for their practical application in electrochemical cells without requiring the use of organic additives or binders. In this study, we present a simple two‐step process to synthesize a stable core–shell structured cobalt sulfide/cobalt aluminum hydroxide nanosheet (LDH‐S) for pseudocapacitor electrode application. The cobalt aluminum layered double hydroxide (CoAl‐LDH) nanoplates were synthesized in basic aqueous solution with a kinetically‐controlled thickness. Owing to the facile diffusion of electrolytes through the nanoplates, thin CoAl‐LDH nanoplates have higher specific capacitance values than thick nanoplates. The as‐grown CoAl‐LDH nanoplates were transformed into core–shell structured LDH‐S nanosheets by a surface modification process in Na₂S aqueous solution. The chemically robust cobalt sulfide (CoS) shell increased the electrochemical stability compared to the sulfide‐free CoAl‐LDH electrodes. The LDH‐S electrodes exhibited high electrochemical performance in terms of specific capacitance and rate capability with a galvanostatic discharge of 1503 F g^?1 at a current density of 2 A g^?1 and a specific capacitance of 91 % at 50 A g^?1.     

Computer simulation of the structure of the electrochemical double layer

We analyze and compare the structure of the electrochemical double layer obtained from molecular dynamics simulations of concentrated aqueous NaCl and CsF solutions near a model electrode. The electrode is modeled as a corrugated external potential in conjunction with the image charge model. Calculations are performed for uncharged electrodes and for electrodes carrying positive or negative surface charges.     

Electrochemistry of nano-scale bacterial surface protein layers on gold

The mechanism of the recrystallization of nano-scale bacterial surface protein layers (S-layers) on solid substrates is of fundamental interest in the understanding and engineering of biomembranes and e.g. biosensors. In this context, the influence of the charging state of the substrate had to be clarified. Therefore, the electrochemical behaviour of the S-layers on gold electrodes has been investigated by in-situ electrochemical quartz microbalance (EQMB) measurements, scanning force microscopy (SFM) and small-spot X-ray photoelectron spectroscopy (SS-XPS) of potentiostatically emersed substrates. It was shown that the negatively charged bonding sites of the S-layer units (e.g. carboxylates) can bond with positively charged Au surface atoms in the positively charged electrochemical double layer region positive of the point of zero charge ( approximately -0.8 V vs. saturated mercury-mercurous sulphate electrode). Surface conditions in other potential regions decelerated the recrystallization and fixation of S-layers. Time-resolved in-situ and ex-situ measurements demonstrated that two-dimensional S-layer crystal formation on gold electrodes can occur within few minutes in contrast to hours common in self-assembled monolayer (SAM) generation. These results proved that the recrystallization and fixation of 2D-crystalline S-layers on an electronic conductor can be influenced and controlled by direct electrochemical manipulation.     

Supercapattery: Merit merge of capacitive and Nernstian charge storage mechanisms

Supercapattery is the generic name for hybrids of supercapacitor and rechargeable battery. Batteries store charge via Faradaic processes, involving reversible transfer of localised or zone-delocalised valence electrons. The former is governed by the Nernst equation. The latter leads to pseudocapacitance (or Faradaic capacitance) which may be differentiated from electric double layer capacitance with spectroscopic assistance such as electron spin resonance. Because capacitive storage is the basis of supercapacitors, the combination of capacitive and Nernstian mechanisms has dominated supercapattery research since 2018, covering nanostructured and compounded metal oxides and sulphides, water-in-salt and redox active electrolytes and bipolar stacks of multicells. The technical achievements so far, such as specific energy of 270 Wh/kg in aqueous electrolyte, and charging–discharging for more than 5000 cycles, benchmark a challenging but promising future of supercapattery.     

尖晶石锂锰氧化物电极首次脱锂过程的EIS研究

研究了尖晶石锂锰氧化物电极首次脱锂过程中的电化学阻抗特征. 通过选取适当的等效电路拟合实验所得的电化学阻抗谱数据, 获得了首次脱锂过程中固体电解质相界面膜(SEI膜)的电阻、电容以及电荷传递电阻、双电层电容等随电极极化电位的变化规律.