Transducers in medical ultrasound: Part Three. Transducer applications in echocardiology

A comparison is made between phased arrays and mechanical sector scanners in transcutaneous echocardiographic applications. Aspects such as contact area, beam control, side lobes, grating lobes and image quality are discussed in the context of transducer frequency. The incorporation of simultaneous acquisition of Doppler velocity information and display of M-mode signals is considered. Transoesophageal and intraoperative scanning systems for cardiology are also compared, in particular linear arrays, phased arrays and mechanical scanners, and their advantages and disadvantages in relation to the above mentioned aspects are discussed. The general conclusion is that electronic sector scanners may have a considerably improved cost/benefit ratio in the near future and thereby will become the leading systems for echocardiography.     

Integrated receiver architectures for board-to-board free-space optical interconnects

In many computer and server communications copper cables and wires are currently being used for data transmission and interconnects. However, due to significant shortcomings, such as long transmission time, high noise level, unstable electrical properties, and high power consumption for cooling, researchers are increasingly turning their research interests toward alternatives, such as fiber optic interconnects and free-space optical communication technologies. In this paper, we present design considerations for an integrated receiver for high-speed free-space line-of-sight optical interconnects for distortion-free data transmission in an environment with mechanical vibrations and air turbulences. The receiver consists of an array of high-speed photodiodes for data communication and an array of quadrant photodiodes for real-time beam tracking in order to compensate for the beam misalignment caused by vibrations in servers. Different configurations for spatially positioning the quadrant and data photodiodes are discussed for 4×4 and 9×9 multielement optical detector arrays. We also introduce a new beam tracking device, termed the strip quadrant photodiodes, in order to accurately track highly focused optical beams with very small beam diameter.     

Wave propagation in beams with anti-symmetric piezoelectric shunting arrays

Piezoelectric shunting arrays are employed to control the wave propagation in flexible beams. Contrary to conventional symmetric configuration, a substrate beam with anti-symmetric shunting arrays is investigated by adapted transfer matrix method. Compared with symmetric scheme, the anti-symmetric one demonstrates some distinctive characteristics.Primarily, the longitudinal and flexural waves are coupled, so they are correlated and must be considered simultaneously.Moreover, the attenuation of flexural wave is much stronger in anti-symmetric scenario, while the longitudinal wave demonstrates the converse side. As a result, the anti-symmetric scheme can be utilized to improve the vibration isolation capability of shunting arrays. Finally, the theoretical analyses are validated by finite element simulations.     

Array designs for amplitude and phase control of millimeter-wave beams

New array design concepts are described for the phase and amplitude control of millimeter and submillimeter-wave beams. Phase shifter array designs providing increased phase range and wider bandwidth are described. Techniques involving the integration of gain-producing elements as well as tuning elements on a single array are proposed for application to high-performance beam control and beam shaping. These concepts should facilitate the further development of quasi-optical solid state device-based arrays for application to millimeter-wave electronic systems.     

密集阵高功率微波空间功率合成

对基于矩形阵列的高功率微波二维密集阵阵列合成进行了研究。仿真分析了均匀矩形栅格阵列的远场方向图,结果表明采用密集阵可以实现高效的、具有确定主波束的空间功率合成。并分析了阵元间距及阵元初相位对阵列空间功率合成的影响,结果表明:阵元间距越小,栅瓣越少,主波束宽度越宽,具有确定主波束的临界距离越小;当目标高度超过阵临界距离时,阵元初相位相差越小合成效率越高,阵列初相位分布范围超过/2时,阵列得不到确定的主波束,进行阵列设计时应充分考虑阵元间距及初相位对阵列合成的影响。     

High-resolution beam steering using microlens arrays

Imaging or beam-steering systems employing a periodic array of microlenses or micromirrors suffer from diffraction problems resulting from the destructive interference of the beam segments produced by the array. Simple formulas are derived for beam steering with segmented apertures that do not suffer from diffraction problems because of the introduction of a moving linear phase shifter such as a prescan lens before the periodic structure. The technique substantially increases the resolution of imaging systems that employ microlens arrays or micromirror arrays. Theoretical, numerical, and experimental results demonstrating the high-resolution imaging concept using microlens arrays are presented.     

Control techniques for millimeter-wave active arrays

Control techniques for millimeter-wave active arrays are considered. In addition to voltage control, optical and quasi-optical approaches are discussed as analog control techniques. Digital control techniques discussed include on/off switching arrays and designs with superimposed device and/or grid structures for multi-bit capability. A quasi-optical Q switch, capable of high peak power pulse generation, is discussed as an example application of these techniques.     

电寻址空间光调制器“黑栅”效应的消除方法

提出了两种消除电寻址空间光调制器由于低开口率所引起的"黑栅"效应的方法:利用衍射微透镜阵列的方法和利用纯相位型光束整形器件阵列的方法.分析了这两种方法的基本原理,给出了微透镜阵列和光束整形器件阵列的设计思想,并比较了这两种方法的异同点.采用杨一顾相位恢复算法得到了光束整形结果.理论分析及仿真计算表明:这种方法均能有效地消除电寻址空间光调制器相邻象素之间的黑带.     

Power semiconductor laser diode arrays characterization

Nowadays, power semiconductor laser diode arrays are becoming a widespread source for a large variety of industrial applications. In particular, the availability of low-cost high-power laser diode arrays makes their use possible in the industrial context for material cutting, welding, diagnostics and processing. In the above applications, the exact control of the beam quality plays a very important role because it directly affects the reliability of the final result. In this paper, we present two different approaches useful for the characterization of the beam quality in laser diode arrays. The first one, starting from total intensity measurements on planes orthogonal to the beam propagation path, is able to deduce the working conditions of each laser setting up the array. The second one is aimed at the measurement of a global quality factor of the array itself; to this end, the empirical extension of the M² concept to composite beams is presented along with some experimental results. As the first technique is especially intended for the non-destructive detection of design problems in the array itself and in the bias circuitry, the second one represents a powerful tool for the rapid on-line diagnostics of the laser beam during its use.     

凹折射微透镜阵列的离子束刻蚀制作

利用光刻热熔成形工艺及离子束刻蚀制作 12 8× 12 8元凹微透镜阵列。所制硅及石英凹微透镜的典型基本图形分别为凹球冠形、凹柱形和矩顶凹面形。分析了在光致抗蚀剂柱凹微透镜图形制作过程中的膜系匹配特性 ,与制作该种微透镜有关的光掩模版的主要结构参数 ,以及光致抗蚀剂掩模工艺参数的控制依据等。探讨了在凹微透镜器件制作基础上利用成膜工艺开展平面折射微透镜器件制作的问题。采用扫描电子显微镜 (SEM)和表面轮廓仪测试了所制石英凹微透镜阵列的表面微结构形貌。给出了所制石英凹微透镜阵列远场光学特性的测试结果。     

Magnetic properties of hexagonal ferrite dot arrays

Patterned magnetic media have been considered as one of the promising candidates for future ultra-high-density magnetic recording. In this paper, a new kind of patterned medium based on hexagonal ferrite have been studied. We have successfully fabricated strontium ferrite dot arrays by electron beam lithography. Their magnetic properties are evaluated by magnetic force microscopy (MFM) and superconducting quantum interference device (SQUID). The results show the dot arrays have perpendicular anisotropy. Dots with the lateral size larger than 500 nm show multidomain magnetization configuration in the initial magnetization state. However, with dot size decreased to 500 nm, all the dots have single-domain configuration both in the initial magnetization state and remanent magnetization state.     

Legendre函数加权的声纳宽频带恒定束宽波束特性分析*

为了处理水声信号,声纳阵列通常需要形成宽频带恒定束宽的波束。采用两种阵元加权方法分析二维圆弧形恒定束宽换能器声纳阵列:球面Legendre函数加权方法和柱面Legendre函数加权方法。分别对球面阵、柱面阵和平面阵这三种几何结构的声纳阵列进行分析,并且计算波束宽度和波束方向。结果表明,在宽频带范围内,除了柱面Legendre函数加权的球面阵之外,其余Legendre函数加权的声纳阵列均能利用简单的、不随频率变化的阵元权重和阵元延时,形成恒定束宽的波束,并且具有较小的旁瓣,此外波束方向与预设方向也较为一致。相对于其他恒定束宽波束形成方法,Legendre函数加权方法能利用较低的计算复杂度来实现良好的宽频带恒定束宽的波束特性。     

基于连续激光的纳米结构研制

基于激光受激辐射损耗原理的远场光学超分辨成像技术,当圆形入射高斯激光经过涡旋相位板调制后,将转变为中心光强为零的圆环形光束,该形状的激光束与光敏聚合物作用,能够制备出具有一定功能的纳米结构。介绍了自主搭建的基于圆环连续激光光源的激光直写系统,以及利用该系统研制的复合纳米结构。当光源为532 nm连续激光输出时,与正性光刻胶作用,得到直径 < 50 nm的纳米柱复合结构,以及整齐均匀的纳米柱阵列结构;与负性光刻胶作用,得到直径 < 100 nm的纳米通道,以及整齐均匀的中央有纳米通道的微米柱复合结构阵列。当光源为405 nm连续光纤激光时,与正性光刻胶作用,也得到了直径小至153 nm的纳米柱复合结构及其阵列。这些纳米结构的基本单元尺寸都突破了光学“阿贝衍射极限”的限制,具有实用潜力。     

高功率光纤激光阵列被动相干组束技术研究

对高功率光纤激光的被动相干组束技术进行了理论和实验研究.介绍了几种典型的被动相干组束技术,并对其功率可提升性进行了分析.详细报道了课题组在光反馈环形腔结构光纤激光相干组束方面的研究进展,研究分析了该相干组束技术的输出光谱特性和路数可提升性,建立了4路和8路高功率光纤放大器的相干组束系统,并分别实现了1062和1090W...     

Controlled switching of discrete solitons in waveguide arrays

We suggest an effective method for controlling nonlinear switching in arrays of weakly coupled optical waveguides. We demonstrate digitized switching of a narrow input beam for as many as 11 waveguides in the engineered waveguide arrays.     

Characteristics of Radio Telescopes with Multielement Microstrip Focal Arrays

We calculate beam patterns (BPs) and power characteristics of radio telescopes in the multibeam regime with the use of different types of microstrip focal arrays. A terrace design of focal array for illumination of the asymmetric secondary mirror of the RATAN-600 radio telescope and a symmetric paraboloid dish is proposed. Ways for optimization of this type of array are considered. Characteristics of a radio telescope with a millimeter-wave planar circularly polarized focal array are calculated. Some applications of multibeam microstrip focal arrays are considered.__________Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika,Vol.48, No. 2, pp. 95–109, February 2005     

Coherent beam combining of 137 W 2 × 2 fiber amplifier array

We demonstrate coherent beam combining of two-dimensional fiber amplifier arrays with a total of 137 W output power using stochastic parallel gradient descent (SPGD) algorithm. Compact all-fiber polarization-maintained single frequency fiber amplifier chains are developed and four fiber amplifiers are arranged to 2 × 2 laser array with a fill factor of 70% in the near-field. Active phase control is implemented by a digital signal processor (DSP) based SPGD controller. The fringe visibility of the coherent combined beam profile is as high as 81% when the system is closed-loop controlled despite perturbations of the environment.     

二元振幅型面板用于光束空间整形

为了提高高功率激光系统的整体效率和充分利用光能,需要对前端注入的高斯光束进行空间整形,实现驱动器终端激光的均匀化输出.采用振幅型二元面板对激光光束进行空间强度整形,利用误差扩散法进行了理论设计,数值摸拟了整形效果,同时讨论了面板加工误差以及空间滤波器的小孔大小等因素带来的影响.根据理论设计,分别加工了反高斯透射率分布和抛物线透射率分布的二元面板,并进行了整形实验,实现了各自的整形功能,并做了误差分析.实验让明二元面板能对激光光束的空间强度分布实现了精确的整形.     

A planar active sound control system using two-dimensional spatial harmonics

An active sound control system based on the extraction of orthogonal spatial harmonics is considered. The system comprises two parallel planar rectangular receiving arrays consisting of small monopole receivers and two planar rectangular transmitting arrays (installed parallel to the receiving arrays) consisting of small monopole transmitters. The field received by the receiving arrays is approximated by a finite number of propagating plane waves with the help of the Fourier transform. The transmitting arrays excite the same set of plane waves outside the system, their amplitudes being chosen so as to cancel the incident external field in a certain region near the system behind the transmitting arrays. The performance of the system is considered for both continuous and discrete distributions of transmitters and receivers. Allowance is made for random errors in the transmitters and receivers, individual to each device.