AN ANALYSIS ON THE EQUIVALENCE OF THE EYE TO A SYSTEM WITH ABERRATION

Computed transfer functions for ε=0.60 and 0.75 annular pupils of 2.67 mm o.d. showthat absorption of the average spherical aberration of the eye is still incomplete but if theeye is so designed as to adjust its focal plane in order to achieve a best Strehl ratio, itwould show a transfer function approaching that of a diffraction limited system, i.e. the opticaldefect of the eye is overcompensated. However, it is argued that a varying amount offocusing adjustment of the eye is needed in order to account for the transfer function ofthe eye of different pupil sizes, though not always to the extent of achieving a best Strehlratio. Such a property of the eye is referred to variously as the antidefocusing, deblurringor contrast constancy phenomenon and, when operationally defined, this is equivalent to sayingthat the eye has a greater depth of focus than that defined for a physical system based upona fixed demodulation criterion. The signifi ance of the physiological depth of the eye isdiscussed.     

Popularising Chemistry in Secondary Schools——through the development of Scientific and Technological Literacy for All

While chemistry is popular for children of primary school age,its popularity drops dramatically in secondary schools,A potential solution to address this is to recognise the need for greater relevance-relevance to the curriculum,to the needs of society and,in the eyes of the students.The paper tries to puts forward a rethink of the philosophy for school chemistry education,based on the underlying belief that chemistry education is an integral part of education.The target is labelled scientific and technological literacy for all (STL),STL rejects the notion that chemistry is taught solely to acquire tha abilities to be a scientist and supports the vision of a single curriculum goal,applicable to all students.Besides being a philosophy,STL is also a teaching approach.This approach is to initiate the teaching of chemistry topics,starting from a carefully chosen society perspective and to introduce the conceptual learning on a need-to-know basis.A limitatioin is the professional development of teachers,Suggestion for overcoming this involve workshop on materials development.Aconcern is expressed in cases where teachers make use of ready-made teaching materials(a common practice),without first gaining an understanding and an appreciation of the intended philosophy related to these materials.     

A Novel Method for Fabrication of a Glass-Electrode-Based Lipase Sensor

Lipase is one of the hydrolases. It catalyzes the hydrolysis of triglycerides, liberating fat acids. Based on its catalysis and the response of a glass electrode to the acids, a glass-electrode-based lipase sensor can be fabricated1, which has great potential in clinical medicine for the detection of blood fat in human serum samples.The immobilization of lipase on the bulb of a glass electrode is the key to the development of the sensor. In addition to its response time, which has a lot to do …     

TRANSLOCATION IN CASE OF ELLIPSOID

An extension of Bjerhammar's translocation to the involvement of the 1st order of contribu-tion of the flattening of an ellipsoid has been developed to be in keeping with a special pur-pose of higher accuracies. To complete it, we follow this way: (i) to carry out a new Poisson in-tegral involving the effect of the flattening, (ii) to solve the so-called simple Robin problemfor an ellipsoid on a boundary condition of radial derivative, and (iii) to derive a solution ofgeneral Robin problem in the case of an ellipsoid via the solution of simple Robin problem aftertransforming boundary conditions from normal derivative into radial derivative. Finally, the useof the combination of the solution of general Robin problem with the generalized Poisson inte-gral with respect to the regular harmonic function r△g on the linearized Molodensky problemfor an ellipsoid makes a definition of the desired translocation in the case of an ellipsoid. Ob-viously, this developed translocation will go back to the traditional     

Studies on organophosphorus compounds 104. Reaction of carbanions derived from alkylphosphonates

Structural effect of substituents directly bonded to carbanions bearing a phosphorate moiety is examined. Nucleophihc addition of phosphonate carbanion to 1-nitroalkene followed by subsequent reaction with chlorotrimethylsilane leads to a series of 2-isoxazoline based on the formation of an alkene and silyl nitronate as a 1,3-dipole. On the other hand, addition of carbanion derived from isocyanomethylphosphonate to nitroalkene with the formation of nitronate followed by intromolecular cyclization provides substituted phosphoryl pyrroles.     

Molecular Simulations using Spherical Harmonics

Computer-aided drug design is to develop a chemical that binds to a target macromolecule known to play a key role in a disease state. In recognition of ligands by their protein receptors, molecular surfaces are often used because they represent the in-teracting part of molecules and they should reflex the comple-mentarity between ligand and receptor. However, assessing the surface complementarity by searching all relative position of two surfaces is often computationally expensive. The comple-mentarity of lobe-hole is very important in protein-ligand inter-actions. Spherical harmonic models based on expansions of spherical harmonic functions were used as a f‘mgerprint to ap-proximate the binding cavity and the ligand, respectively. This defines a new way to identify the complementarity between lobes and holes. The advantage of this method is that two spherical harmonic surfaces to be compared can be defined sep-arately. This method can be used as a filter to eliminate candi-dates among a large number of conformations, and it will speed up the docking procedure. Therefore, it is possible to select complementary ligands or complementary conformations of a ligand and the macromolecules, by comparing their fingerprints previously stored in a database.     

CALCULATION OF THE YOUNG''''S MODULUS OF AN ADSORBED POLYMER LAYER

Polymer layers adsorbed to a surface or in a confined environment often change their mechanical properties. There is even the possibility of solidification of the confined layer. To judge the stiffness of such a layer, we used the Hertz model to calculate the Young's modulus of the polymer layer in the confinement of AFM experiments with silicon nitride tip with a radius of curvature of R≈50 nm and a glass sphere attached to the cantilever R = 5μm. Since there is no visible indentation of the layer in the AFM experiments, the layer is either penetrated very easily, or the indentation is too small to be seen in a force curve. The latter would be the case for a polymer layer with a Young's modulus above 4×108 Pa in case of an experiment with a silicon nitride tip and 4×105 Pa in case of a glass sphere.     

Composition and rheology of polyamide-6 obtained by using bi- and tri-functional coupling agents

A statistical approach is developed, based on a Monte Carlo method, in order to determine the statistical composition of a polyamide-6 sample composed of caprolactam (an AB-type monomer) and of a di-acid (A2 type) or a tri-acid (A3 type) as coupling agents. For this composition, the linear rheological behavior of these systems is predicted using a tube-based theory. This allows us to show that while coupling agents of type A2 can be seen as flow improver, the effect of branching agents of type A3 , depending on the synthesis recipe and the conversion level, can lead either to an increase or to a decrease of the viscosity. By adding specific amount of these agents, we also show that it is possible to obtain materials with the same zero-shear viscosity but with different shear thinning behavior. Furthermore, the polydispersity of linear samples of the same average number molecular weight, M n , is discussed in function of the amount of A2 monomers they contain. Ranging from 2 to 1.5, this difference in polydispersity is expected to have a significant influence on the processing behavior of such materials.     

MOLECULAR DYNAMICS SIMULATION OF THE RELAXATION OF A FULLY EXTENDED POLYETHYLENE CHAIN

Molecular dynamics simulation of the relaxation at 300 K of a fully extended polyethylene chain of800 CH_2 units has been carried out by following the changes in morphology, van der Waals energy, radius ofgyration in the sense of mechanics and gyration radius in the sense of Flory, population of trans-conformation and orientation factor. The relaxation went through three stages: (1) relaxation from themorphology of a straight rod of 100 nm length to the molphology close to a random coil of gyration radius5.9 nm in 110 ps; (2) collapse of the morphology of a coil to a highly compact globule close to a sphere ofgyration radius 1.3 nm after 178 ps as the result of intersegmental van der Waals attractive interactions; (3)lateral ordering of the folded chain segments in the globule without appreciable changes in the chaindimension up to 1600 ps, the time limit of present simulation. Nearly complete relaxation of local segmentalorientation was performed much faster than the relaxation of globule chain orientation even for a single chainof low degree of polymerization and at a temperature some 155℃above its T_g. The lateral ordering of thechain segments during the period 178 to 680 ps of the simulation time was found to obey the Avramiequation with an Avrami index of 1 .44.     

Gallium trichloride-catalyzed conjugate addition of indole and pyrrole to α,β-unsaturated ketones in aqueous media

Michael addition of indole and pyrrole to a variety ofα,β-unsaturated ketones was efficiently promoted by a catalytic amount of GaCl_3 in aqueous media to afford the corresponding products in good to excellent yields.     

5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成

以5-雄烯二醇为原料,用微生物转化的方法合成了两个重要的神经甾体5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇。所用菌种总枝毛霉为我们自己筛选,并首次应用于5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成中。     

SmI2－Mediated Addition Reaction of α－Halomethylsulfones to Carbonyl Compounds. A Convenient Synthesis of β－Hydroxysulfones

Due to the chemoselective dehalogenation by SmI2, the addition of a-halomethylsulfones to carbonyl compounds afforded ,β-hydroxysulfones. Those reactions with α-bromomethylsulfones gave the products in moderate to good yields. The SmI2-mediated addition of gem-dihalomethylsulfones to ketones also afforded α-halo-β-hydroxysulfones in moderate yields.     

Fragmentation Mechanism of Trans—α—Aryl—β—enamino Esters

Electron impact-induced fragmentation mechanism of Trans-α-Aryl-β-enamino esters were investigated using mass-analyzed ion kinetic energy (MIKE) spectrometry and high resolution accurate mass data It was found that the main characteristic fragmentations of compounds studied were:an odd electron ion M^ -EtOH was formed by losing a neutral molecule of ethanol;and the skeletal rearrangements took place;and the ring opening reaction happened after losing a carbon monoxide;and the typical McLafferty rearrangement underwent in ester group.The cycliztion reation caused by losing neutral molecule of TsNH2 due to the ortho-effects of substituted group of gromatic ring was also observed.     

Catalytic Hydrogenation of α,β-Epoxyketones to β-Hydroxyketones with Two Sulfinyl Analogues of Coenzyme NADH Models

An efficient method for the selective hydrogenation of a series of α,β-epoxyketones to β-hydroxyketones using catalytic amount of two sulfinyl analogues of NAD^＋ model compounds is reported. The lack of any diastereoselectivity for the formation of β-hydroxyketones with optically pure sulfinyl analogue of NAD^＋ model supports the radical mechanism proposed previously.     

Veronicafolin－β-环糊精的物化表征及Veronicafolin－羟丙基-β-环糊精包合物溶解性的增强

用氢谱、红外光谱、X-射线粉末衍射、热分析、元素分析等测试方法研究了Veronicafolin (3,5,4′-三羟基-6,7,3′-三甲氧基黄酮) 和β-环糊精 (β-CD) 的固体包合物的谱学特征。元素分析结果显示形成Veronicafolin-β-CD·20H2O包合物，其中C：39.58%, H: 5.75%，表明包合物中主客体比为1∶1。该包合类型属于A_L-型。通过紫外-可见分光光度法研究了在羟丙基-β-环糊精（HP-β-CD）的存在下Veronicafolin的相溶解度曲线，测得校正曲线为y = 24148x + 0.0075 (r=0.9999)，相溶解曲线为y=0.4738x-2.0×10^-7 (r=0.9490)，包结平衡常数Ks为4.5×10⁶mol-1。HP-β-CD提高了黄酮醇Veronicafolin的溶解度。     

Preparation and antibacterial activity of aromatic derivatives of β-aminopropionic and γ-aminobutyric acid

Ten aromatic derivatives of β-aminopropionic acid and γ-aminobutyric acid were prepared.Their compositions and structures were identified by elemental analysis,IR,and 1H NMR.They have been examined for their antibacterial action against Staphylococcua aurens and Escherichia coli.These compounds showed higher activity than the aromatic derivatives of ct-amino acid which were reported previously.The general conclusion to be drawn is that the distance between amino and carboxylic group in these molecules could affect their antibacterial activity.Furthermore,those compounds with p-methyl substituent in phenyl ring exhibit higher activity than the others,and all the compounds exhibit higher activity against Escherichia coli and against Staphylococcua aureus.     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003     

Michael-Addition Reaction of Malononitrile with α,β-Unsaturated Cycloketones Catalyzed by KF／Al2O3

A series of KF/Al2O3 catalyzed Michael-addition reactions between malononitrile and α,β-unsaturated cycloketones in DMF solution were studied. At room temperature, 2-cyano-3-aryl-3-(1,2,3,4-tetrahydronaphthalen-1-one-2-yl) propionitrile derivatives were synthesized by the reaction between 2-arylmethylidene-1,2,3,4-tetra-hydronaphthalen-1-one and malononitrile. However, if the temperature was increased to 80℃, 2-amino-3-cyano-4-aryl-4H-benzo[h]chromene derivatives were obtained in high yields. When the α,β-unsaturated ketones were replaced by 2,6-biarylmethylidenecyclohexanone or 2,5-biarylmethylidenecyclopentanone, another series of 2-amino-3-cyano-4H-pyran derivatives was isolated successfully. The structures of the products were confirmed by X-ray diffraction analysis.     

Ceramic Filter Balls Loaded with α-Fe2O3 and Their Application to NH3-N Wastewater Treatment

Hydrolysis reaction of Fe(NO₃)₃ at a high temperature in the presence of urea as the homogeneous precipitant was studied. With the prepared ceramic filter balls loaded with α-Fe₂O₃ after high temperature calcination, the loading of α-Fe₂O₃ on the porous ceramic filter balls from Fe(NO₃)₃ solutions of different concentrations and mechanical stability of the loaded α-Fe₂O₃ were studied. The product was characterized using XRD and SEM. Adsorption experiments were conducted to evaluate the performance of the product in adsorbing NH₃-N. It turned out that the specific surface area of the ceramic filter balls loaded with α-Fe₂O₃ had increased to 36.5387 m²/g from original 4.6127 m²/g. When the concentration of Fe(NO₃)₃ was 0.40 mol/L, the loading of α-Fe₂O₃ on the ceramic filter balls accounted for 8.4% of the total mass of the adsorbent and α-Fe₂O₃ was adsorbed on the filter balls very well. The adsorption isotherm of NH₃-N on the ceramic filter ball adsorbent loaded with α-Fe₂O₃ was of Langmuir type. The saturated adsorption capacity was 3.33 mg/L, and the adsorption constant K was 0.1873. NH₃-N was adsorbed by α-Fe₂O₃ more easily, which was a kind of specific adsorption.     

An Efficient One-pot Synthesis of β-Amino/β-Acetamido Carbonyl Compounds via ZrCl4-catalyzed Mannich-type Reaction

Zirconium(IV) chloride catalyzed efficient one-pot synthesis of β-amino/β-acetamido carbonyl compounds at room temperature is described. In the presence of ZrCl4, the three-component Mannich-type reaction via a variety of in situ generated aldimines, with various ketones, aromatic aldehydes and aromatic amines in ethanol, led to the formation of β-amino carbonyl compounds and the four-component Mannich-type reaction of aromatic aldehydes with various ketones, acetonitrile and acetyl chloride resulted in the corresponding β-acetamido carbonyl compounds in high to excellent yields. This methodology has also been applied towards the synthesis of dimeric β-amino/β-acetamido carbonyl compounds.