Ca9Y(PO4)7:Ce3+,Tb3+纳米荧光粉的制备及发光性能

采用水热法制备出Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺纳米荧光粉,通过XRD、SEM和荧光光谱等对样品进行了分析,研究在Ca₉Y（PO₄）₇基质中引入Ce³⁺,Tb³⁺离子对发光性能的影响规律。研究发现因Tb³⁺离子自身能量交叉驰豫的存在,使得单掺Tb³⁺时,通过调节Tb³⁺离子的浓度可以实现对发光颜色的控制。同时研究了Ce³⁺-Tb³⁺之间的能量传递为电多极相互作用的偶极-四极机制,Ce³⁺-Tb³⁺之间最大的能量传递效率为55.6%。Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺的发光颜色可以通过激活离子之间的能量传递和共发射得到可控调节。SEM分析表明荧光粉颗粒尺寸在100 nm左右,分散性好。     

Ca9Y(PO4)7:Ce3+,Tb3+纳米荧光粉的制备及发光性能

采用水热法制备出Ca_9Y(PO4)7∶Ce~(3+),Tb~(3+)纳米荧光粉,通过XRD、SEM和荧光光谱等对样品进行了分析,研究在Ca_9Y(PO4)7基质中引入Ce~(3+),Tb~(3+)离子对发光性能的影响规律。研究发现因Tb~(3+)离子自身能量交叉驰豫的存在,使得单掺Tb~(3+)时,通过调节Tb~(3+)离子的浓度可以实现对发光颜色的控制。同时研究了Ce~(3+)-Tb~(3+)之间的能量传递为电多极相互作用的偶极-四极机制,Ce~(3+)-Tb~(3+)之间最大的能量传递效率为55.6%。Ca_9Y(PO4)7∶Ce~(3+),Tb~(3+)的发光颜色可以通过激活离子之间的能量传递和共发射得到可控调节。SEM分析表明荧光粉颗粒尺寸在100 nm左右,分散性好。     

Preparation and luminescence properties of Ce and/or Tb doped LaPO4 nanofibers and microbelts by electrospinning

Ce³⁺ and/or Tb³⁺ doped LaPO₄ nanofibers and microbelts have been prepared by a combination method of sol-gel process and electrospinning. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), low voltage cathodoluminescence (CL) and time-resolved emission spectra as well as kinetic decays were used to characterize the resulting samples. SEM and TEM results indicate the as-formed precursor fibers and belts are smooth, and the as-prepared nanofibers and microbelts consist of nanoparticles. The doped rare-earth ions show their characteristic emission under ultraviolet excitation, i.e. Ce³⁺ 5d-4f and Tb³⁺⁵D₄-⁷F_J (J=6-3) transitions, respectively. The energy transfer process from Ce³⁺ to Tb³⁺ in LaPO₄:Ce³⁺, Tb³⁺ nanofibers was further studied by the time-resolved emission spectra. Under low-voltage electron beam excitation, LaPO₄:Ce³⁺, Tb³⁺ microbelt phosphors have a higher intensity than that of nanofiber phosphors.     

Luminescence of NaGdFPO4:Ln after VUV excitation: A comparison with GdPO4:Ln (Ln=Ce, Tb)

The phosphors NaGdFPO₄:Ln³⁺ and GdPO₄:Ln³⁺ (for Ln³⁺=Ce³⁺ and Tb³⁺) were prepared by solid-state reaction technique, the VUV-vis spectroscopic properties of the phosphors were investigated, and we vividly compare the luminescence of Ce³⁺ and Tb³⁺ in the hosts. For phosphors GdPO₄:Ln³⁺, the band near 155 nm in VUV excitation spectrum is assumed to be the host-related absorption, and for NaGdFPO₄:Ln³⁺ the absorption is moved to longer wavelength, near 170 nm, showing the P-O bond covalency increased after fluoridation. The f-d transitions of Ce³⁺ and Tb³⁺ in the host lattices are assigned and corroborated, and it was found that the 5d states are with lower energy in NaGdFPO₄:Ln³⁺ than those in GdPO₄:Ln³⁺. For fluoridation of GdPO₄:Ln³⁺ to NaGdFPO₄:Ln³⁺, the energy change of Ln³⁺ (Ln=Ce, Tb) 5d states is consistent with that of host-related absorption.     

Synthesis, vacuum ultraviolet and near ultraviolet-excited luminescent properties of GdCaAl3O7: RE (RE=Eu, Tb)

Vacuum ultraviolet (VUV) excitation and photoluminescent (PL) properties of Eu³⁺ and Tb³⁺ ion-doped aluminate phosphors, GdCaAl₃O₇:Eu³⁺ and GdCaAl₃O₇:Tb³⁺ have been investigated. X-ray diffraction (XRD) patterns indicate that the phosphor GdCaAl₃O₇ forms without impurity phase at 900 °C. Field emission scanning electron microscopy (FE-SEM) images show that the particle size of the phosphor is less than 3 μm. Upon excitation with VUV irradiation, the phosphors show a strong emission at around 619 nm corresponding to the forced electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺, and at around 545 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺. The results reveal that both GdCaAl₃O₇:RE³⁺ (RE=Eu, Tb) are potential candidates as red and green phosphors, respectively, for use in plasma display panel (PDP).     

Sol-gel deposition and luminescent properties of LaMgAl11O19:Ce/Tb phosphor films

Rare earth ions (Ce³⁺, Tb³⁺)-doped LaMgAl₁₁O₁₉ phosphor films were deposited on quartz glass substrates by Pechini sol-gel and dip coating method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), atomic force microscopy (AFM), field emission scanning electronic microscopy (FESEM), photoluminescence (PL) spectra, and lifetimes were used to characterize the resulting films. The results of XRD indicated that the magnetoplumbite structure LaMgAl₁₁O₁₉ phase can be obtained at 1200 °C on quartz glass substrates. This was further verified by the results of FT-IR and TG-DTA. AFM study showed that uniform films have an average grain size of 150 nm and a root mean square (RMS) roughness of 4 nm. The thickness of the films characterized by FESEM is about 340 nm. LaMgAl₁₁O₁₉:Ce³⁺ film showed the parity and spin allowed 5d-4f band emission of Ce³⁺ with a maximum at 350 nm. Ce³⁺, Tb³⁺-codoped LaMgAl₁₁O₁₉ films showed the band emission of Ce³⁺ and characteristic emission of Tb³⁺, namely, ⁵D_3,4-⁷F_J (J=6, 5, 4, 3) due to an efficient energy transfer from Ce³⁺ to Tb³⁺ in the host.     

La7O6(BO3)(PO4)2:Eu3+/Tb3+荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La₇O₆（BO₃）（PO₄）₂：Eu³⁺材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为⁵D₀→⁷F₂特征能级跃迁,Eu³⁺的最优掺杂浓度为0.08,对应的CIE坐标为（0.610 2,0.382 3）;La₇O₆（BO₃）（PO₄）₂：Tb³⁺材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb³⁺的⁵D₄→⁷F₅能级跃迁,Tb³⁺离子的最优掺杂浓度为0.15,对应的CIE坐标为（0.317 7,0.535 2）。此外,对2种材料的变温光谱分析发现Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂荧光材料均具有良好的热稳定性。     

Solvothermal synthesis and luminescent properties of monodisperse LaPO4:Ln (Ln=Eu, Ce, Tb) particles

Monodisperse rare-earth ion (Eu³⁺, Ce³⁺, Tb³⁺) doped LaPO₄ particles with oval morphology were successfully prepared through a facile solvothermal process without further heat treatment. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are well crystalline at 180 °C and assigned to the monoclinic monazite-type structure of the LaPO₄ phase. It has been shown that all the as-synthesized samples show perfectly oval morphology with narrow size distribution. The possible growth mechanism of the LaPO₄:Ln has been investigated as well. Upon excitation by ultraviolet radiation, the LaPO₄:Eu³⁺ phosphors show the characteristic ⁵D₀−⁷F_1-4 emission lines of Eu³⁺, while the LaPO₄:Ce³⁺, Tb³⁺ phosphors demonstrate the characteristic ⁵D₄−⁷F_3-6 emission lines of Tb³⁺.     

Controlled synthesis and luminescent properties of Eu(Eu), Dy-doped Sr3Al2O6 phosphors by hydrothermal treatment and postannealing approach

In this work, Sr₃Al₂O₆: Eu²⁺ (Eu³⁺), Dy³⁺ phosphors have been prepared by hydrothermal treatment and subsequently postannealing approach, using Sr(NO₃)₂, Al(NO₃)₃·9H₂O, and CO(NH₂)₂ as starting materials. The as-obtained phosphors were characterized by means of XRPD, FESEM, and PL techniques. In addition, many reaction parameters were studied in detail, including the initial mole ratios, hydrothermal reaction temperature, calcination temperature and calcination atmosphere. Remarkably, two scientific merits exist herein: Sr₃Al₂O₆: Eu²⁺ (Eu³⁺), Dy³⁺ phosphors can be selectively obtained in a reducing atmosphere (H₂/Ar, 20%+80%) and in air, respectively; adding certain amount of sodium citrate can alter the shape and size of Sr₃Al₂O₆: Eu²⁺ (Eu³⁺), Dy³⁺ phosphors in essence. Besides, the luminescent properties of Sr₃Al₂O₆: Eu²⁺ (Eu³⁺), Dy³⁺ phosphors were studied by excitation spectra, emission spectra and decay curves.     

稀土掺杂Lu3Al5O12荧光粉的发光特性及能量传递

采用高温固相法制备了Ce、Sm共掺Lu_3Al_5O_(12)荧光粉。通过X射线衍射分析、荧光光谱分析研究了样品的结构、发光特性,并通过理论计算研究了能量传递效率、能量传递的临界距离以及能量传递方式。X射线衍射分析表明所制备的荧光粉具有单一的石榴石结构;荧光光谱分析表明,在464 nm蓝光激发下,Sm~(3+)的引入可增加Lu_3Al_5O_(12)∶Ce,Sm发射光谱中红光成分,并且随着Sm~(3+)浓度的增加,Ce~(3+)发光强度逐渐减弱。计算出Ce~(3+)、Sm~(3+)之间的能量传递效率高达77.42%,确定了Ce~(3+)、Sm~(3+)之间的能量传递机制为偶极-偶极相互作用。     

Polyol-mediated solvothermal synthesis and luminescence properties of CeF3, and CeF3:Tb nanocrystals

CeF₃ and CeF₃:Tb³⁺ nanocrystals were successfully synthesized through a facile and effective polyol-mediated route with ethylene glycol (EG) as solvent. Various experimental techniques including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL) spectra as well as decay dynamics were used to characterize the samples. The results indicated that the content of NH₄F and reactant concentrations were key factors in the product shape and size. Excessive NH₄F was necessary for the formation of hexagonal nanoplates. The specific morphology of product can be controlled by changing the NH₄F content and reactant concentrations. In addition, Tb³⁺ doped-CeF₃ sample shows strong green emission centered at 544 nm corresponding to the ⁵D₄-⁷F₅ transition of Tb³⁺. Due to the decrease of nonradiative decay rate, the lifetime of ⁵D₄ level of Tb³⁺ become longer gradually upon increasing the size of product.     

Fabrication and luminescent properties of the core-shell structured YNbO4:Eu/Tb@SiO2 spherical particles

The core-shell structured YNbO₄:Eu³⁺/Tb³⁺@SiO₂ particles were realized by coating the YNbO₄:Eu³⁺/Tb³⁺ phosphors onto the surface of spherical silica via a sol-gel process. The obtained materials were characterized by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform IR spectroscopy (FT-IR), photoluminescence (PL) spectra, and cathodoluminescence (CL) spectra. The results indicate that 600 °C annealed samples consist of amorphous silica core and crystalline YNbO₄:Re shell, having perfect spherical morphology with uniform size distribution. Upon excitation by UV or electron beam, these phosphors show the characteristic ⁵D₀-⁷F_1-4 emission lines of Eu³⁺ and the characteristic ⁵D₄-⁷F_3-6 emission lines of Tb³⁺. The PL intensities of Eu³⁺ can be tuned by altering the annealing temperature and the coating number of YNbO₄:Eu³⁺ layers.     

Uniform AMoO4:Ln (A=Sr, Ba; Ln=Eu, Tb) submicron particles: Solvothermal synthesis and luminescent properties

Rare-earth ions (Eu³⁺, Tb³⁺) doped AMoO₄ (A=Sr, Ba) particles with uniform morphologies were successfully prepared through a facile solvothermal process using ethylene glycol (EG) as protecting agent. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are of high purity and crystallinity and assigned to the tetragonal scheelite-type structure of the AMoO₄ phase. It has been shown that the as-synthesized SrMoO₄:Ln and BaMoO₄:Ln samples show respective uniform peanut-like and oval morphologies with narrow size distribution. The possible growth process of the AMoO₄:Ln has been investigated in detail. The EG/H₂O volume ratio, reaction temperature and time have obvious effect on the morphologies and sizes of the as-synthesized products. Upon excitation by ultraviolet radiation, the AMoO₄:Eu³⁺ phosphors show the characteristic ⁵D₀–⁷F_1–4 emission lines of Eu³⁺, while the AMoO₄:Tb³⁺ phosphors exhibit the characteristic ⁵D₄–⁷F_3–6 emission lines of Tb³⁺. These phosphors exhibit potential applications in the fields of fluorescent lamps and light emitting diodes (LEDs).     

NaBaPOM4:Tb3+绿色荧光粉制备及其发光特性

采用高温固相法合成了NaBaPOM₄:Tb³⁺绿色荧光粉, 并研究了材料的发光性质. NaBaPOM₄:Tb³⁺材料呈多峰发射, 发射峰位于437、490、543、587和624 nm, 分别对应Tb³⁺的⁵D₃→⁷F₄和⁵D₄→⁷F_{J=6, 5, 4, 3}跃迁发射, 主峰为543 nm; 监测543 nm发射峰, 所得激发光谱由4f⁷5d¹宽带吸收(200-330 nm)和4f-4f 电子吸收(330-400 nm)组成, 主峰为380 nm. 研究了Tb³⁺掺杂浓度, 电荷补偿剂Li⁺、Na⁺、K⁺和Cl^-, 及敏化剂Ce³⁺对NaBaPOM₄:Tb³⁺材料发射强度的影响. 结果显示: 调节激活剂浓度、添加电荷补偿剂或敏化剂均可以在很大程度上提高材料的发射强度.     

Host-sensitized luminescence of Dy, Pr, Tb in polycrystalline CaIn2O4 for field emission displays

CaIn₂O₄:Dy³⁺/Pr³⁺/Tb³⁺ blue-white/green/green phosphors were prepared by the Pechini sol-gel process. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), diffuse reflectance, photoluminescence (PL) and cathodoluminescence (CL) spectra as well as lifetimes were utilized to characterize the samples. The XRD results reveal that the samples begin to crystallize at 800 °C and pure CaIn₂O₄ phase can be obtained after annealing at 900 °C. The FE-SEM images indicate that the CaIn₂O₄:Dy³⁺, CaIn₂O₄:Pr³⁺ and CaIn₂O₄:Tb³⁺ samples consist of spherical grains with size around 200-400 nm. Under the excitation of ultraviolet light and low-voltage electron beams (1-5 kV), the CaIn₂O₄:Dy³⁺, CaIn₂O₄:Pr³⁺ and CaIn₂O₄:Tb³⁺ phosphors show the characteristic emissions of Dy³⁺ (⁴F_9/2-⁶H_15/2 and ⁴F_9/2-⁶H_13/2 transitions, blue-white), Pr³⁺ (³P₀-³H₄, ¹D₂-³H₄ and ³P₁-³H₅ transitions, green) and Tb³⁺ (⁵D₄-⁷F_6,5,4,3 transitions, green), respectively. All the luminescence is resulted from an efficient energy transfer from the CaIn₂O₄ host lattice to the doped Dy³⁺, Pr³⁺ and Tb³⁺ ions, and the corresponding luminescence mechanisms have been proposed.     

Synthesis of Ca<Subscript>3</Subscript>Al<Subscript>6</Subscript>Si<Subscript>2</Subscript>O<Subscript>16</Subscript>: Ce<Superscript>3+</Superscript>, Tb<Superscript>3+</Superscript> phosphors by sol–gel method and optical properties

Ca₃Al₆Si₂O₁₆: Ce³⁺, Tb³⁺ phosphors have been prepared by sol–gel method. The structure and photoluminescence properties were studied with careful. The results indicated that the single-phased Ca₃Al₆Si₂O₁₆ phosphors crystallize at 1,000 °C for 2 h in conventional furnace. With appropriate concentrations of Ce³⁺ and Tb³⁺ ions into Ca₃Al₆Si₂O₁₆ matrix, these materials exhibit blue phosphors and white light under ultraviolet radiation. White-light emission can be achieved because of a 400 nm emission ascribed to transitions of Ce³⁺ ions and three sharp peaks at 487, 543, 585 nm, respectively, resulting from transitions of Tb³⁺ ions.     

La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)/Tb~(3+)荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为5D0→7F2特征能级跃迁,Eu~(3+)的最优掺杂浓度为0.08,对应的CIE坐标为(0.610 2,0.382 3);La_7O_6(BO_3)(PO_4)_2∶Tb~(3+)材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb~(3+)的5D4→7F5能级跃迁,Tb~(3+)离子的最优掺杂浓度为0.15,对应的CIE坐标为(0.317 7,0.535 2)。此外,对2种材料的变温光谱分析发现Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2荧光材料均具有良好的热稳定性。     

Photoluminescence properties of La(PO3)3:Tb under VUV excitation

La_1−x(PO₃)₃:Tb_x³⁺ (0<x0.6) were prepared using solid-state reaction. The vacuum ultraviolet (VUV) excitation spectrum of La_0.55(PO₃)₃:Tb_0.45³⁺ indicates that the absorption of (PO₃)₃³⁻ groups locates at about 163 and 174 nm and the absorption bands of (PO₃)₃³⁻ groups (174 nm) and La³⁺–O²⁻ (200 nm) and Tb³⁺ (213 nm) overlap each other. These results imply that the (PO₃)₃³⁻ groups can efficiently absorb the excited energy around 172 nm and transfer the energy to Tb³⁺. Under 172 nm excitation, the optimal photoluminescence (PL) intensity is obtained when Tb concentration reaches 0.45 and is about 71% of commercial phosphor Zn_1.96SiO₄:0.04 Mn²⁺ with chromaticity coordinates of (0.343, 0.578) and the decay time of about 4.47 ms.     

Yb<Superscript>3+</Superscript> → Er<Superscript>3+</Superscript> energy transfer in Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and temperature characteristic of near-infrared photoluminescence

For the Er³⁺–Yb³⁺ codoped Al₂O₃ powders, the strong near-infrared photoluminescence (PL) centered at 1.535 μm derived from the energy transfer (ET) from Yb³⁺ to Er³⁺ was detected by a 978 nm laser diode excitation. Compared with that of Er³⁺ doped Al₂O₃ powders, the PL intensity enhanced about 9 times, the full width at half maximum (FWHM) extended from 82 to 90 nm, and the lifetime increased from 3.22 to 4.17 ms for Er³⁺–Yb³⁺ codoped Al₂O₃ powders at room temperature. The ET coefficient of 2.18 × 10⁻¹⁸ cm³ s⁻¹ from Yb³⁺ to Er³⁺ was obtained based on the rate equations. The decrease of PL intensity with increasing temperature in the range of 298–733 K was observed, due to thermally enhanced nonradiative relaxation ⁴I_13/2 → ⁴I_15/2 dominated over thermally enhanced phonon-assisted ET in the Er³⁺–Yb³⁺ codoped Al₂O₃.     

Synthesis of highly fluorescent LaF3:Ln/LaF3 core/shell nanocrystals by a surfactant-free aqueous solution route

A surfactant-free aqueous solution route has been established for the synthesis of LaF₃:Ln³⁺/LaF₃ core/shell nanocrystals (Ln=Ce, Tb, Nd) heated at 75 °C at ambient pressure. All the as-prepared nanocrystals with spherical shape have an average size around 20 nm, and consist of well crystallized hexagonal phases. The X-ray photoelectron spectra was used to confirm that the LaF₃ shells have coated the LaF₃:Ce³⁺, Tb³⁺ cores. Compared with that of the original cores under the same conditions, the emission intensity of the LaF₃:Ce³⁺, Tb³⁺/LaF₃ and LaF₃:Nd³⁺/LaF₃ core/shell nanocrystals increased significantly of 120% and 60%, respectively. The quantum yield of the LaF₃:Ce³⁺, Tb³⁺/LaF₃ core/shell nanocrystals reached about 27% in aqueous solution. These results indicate that a significant reduction of the quenching from the surface of the core nanocrystals can be obtained by the synthesis of the core/shell structures, and this method can provide more desirable lanthanide-doped nanocrystals for potential biological applications.