丁腈羟聚氨酯/聚甲基丙烯酸酯互穿网络聚合物的动态力学性能研究

采用同步法合成的丁腈羟聚氨酯/聚甲基丙烯酸酯类IPN样品,以TPA动态力学方法研究它的丙烯酸酯组份中,不同组份比,侧基结构和含量与动态力学性能的关系。结果指出,这些体系是半相容体系和相容体系。包含甲基丙烯酸正丁酯,异丁酯的IPN力学阻尼峰比甲基丙烯酸甲酸所具有的峰明显加宽。IPN中丙烯腈对体系的动态力学影响较大。     

遥爪型液体聚合物及其多相共聚物的合成与表征—Ⅵ.基于聚氨酯/甲基丙烯酸甲酯的互穿网络聚合物的研究

本文以二氯二氨基二苯甲烷 和二乙烯基苯(DVB)为交联剂,合成了聚醚聚氨酯/甲基丙烯酸甲酯的半-IPN和全-IPN。观察了组份比,交联剂用量和半-IPN和全-IPN的结构对力学性能的影响。用溶胀法测定了IPN的δ_p和M_c观察了M_c对IPN一些性能的影响。     

网络间含离子键的聚氨酯/接枝乙烯基酯树脂互穿聚合物网络 研究

分别以双酚-A型环氧树脂E-51和聚醚型环氧树脂E-46为原料合成了两种二乙胺-环氧树脂和加成多元醇(分别命名为AE-51,AE-46),将其和甲基丙烯酸一起用于合成聚氨酯/接枝乙烯基酯树脂(PU/接枝VER)互穿聚合物网络(IPN),使之在两个网络间形成离子键。实验结果表明,这类新型的IPN材料中两个网络间的互穿程度与相容性进一步提高,从而导致刚性的接枝VER对弹性的PU网络有更好的增强效果。DSC和FTIR的测定结果表明,在含AE-51的IPN中,由于离子键的作用使PU网络硬段的有序结构遭到很大程度的破坏,与AE-51和PU网络中的硬段以及VER网络有较好的相容性有关,因此这类IPN材料具有较好的力学性能。     

聚醚聚氨酯/环氧树脂互穿网络聚合物的研究(Ⅱ)

合成了不同类型聚醚聚氨酯/环氧树脂(PU/EP)互穿网络聚合物(IPN),通过改变PU中聚乙二醇分子量、3OH/2OH及NCO/OH比值等,研究IPN组份间分子混合程度,采用电镜、动态力学分析及应力应变等测试方法表征。结果表明:聚乙二醇分子量降低及3OH/2OH、NCO/OH比的提高,可使相容性提高,材料力学性能增强。     

聚醚聚氨酯-聚醚聚酰亚胺合金相结构的研究

通过不同分子量的对－氨基苯甲酸酯封端的聚（四次亚甲基）醚和均苯甲甲酸二酐反应,合成了聚醚聚酰胺酸;然后以不同重量比将聚醚聚氨酯和聚醚聚酰胺酸溶液混合反应亚胺化,制备了一系列不同硬段含量的聚醚聚氨酯－聚醚聚酰亚胺合金。用傅立叶变换红外光谱、动态力学分析、示差扫描量热、广角Ｘ－衍射、应力应变试验等分析测试方法对合金进行了研究,结果表明聚醚聚氨酯－聚醚聚酰亚胺合金具有很好的相分离结构,是一类新型耐高温、有韧性的热塑性弹性体。聚醚分子量相同的聚氨酯和聚酰亚胺形成的合金软段相容,合金具有两相结构;聚醚分子量不同的聚氨酯和聚酰亚胺形成的合金软段存在相分离,合金具有三相结构,表现在材料外观上分别为透明不透明的韧性膜,少量聚酰亚胺的掺入,能大大增加材料的耐热性能,而合金的材料力学性能没有明显变化。     

聚氨酯/环氧树脂互穿网络聚合物的性能研究

互穿聚合物网络（Interpenetrating polymer net-work,简称IPN）广泛应用的为聚氨酯基的互穿网络聚合物。其合成多集中在弹性体方面。本文用同步法合成的聚氨酯／环氧树脂互穿网络硬质泡沫塑料材料（简称PU／ERIPNF）,机械性能较好,并研究了其动态力学性能及形态变化。     

聚氨酯聚二甲基硅氧烷半IPN透气性研究

近年来,互穿聚合物网络(IPN)的开发受到了广泛的关注。以聚氨酯为一组分,聚丙烯腈、聚酯及环氧树脂等为另一组分的IPN体系的研究已有报道,而聚氨酯与有机硅的IPN体系的研究报道很少。在本文中,我们对聚氨酯(PU)与聚二甲基硅氧烷(PDMS)半IPN的透气性与结构的关系进行了研究。     

脂肪族聚碳酸酯型聚氨酯/聚甲基丙烯酸甲酯互穿网络聚合物的研究

用同步法合成了聚碳酸亚丙酯聚氨酶／聚甲基丙烯酸甲醇互穿网络聚合物（PPCPU／PMMA，IPN），调节IPN中两组分配比制备出多种高聚物共混物。用DSC、TEM对IPN的研究结果表明．PPCPU／PMMA之IPN的两组分是互不相容的。同时对各种组成比的IPN材料进行力学性能测试，并用SEM对断面进行了观察，发现IPN的密度大于相应体系体积加和值。     

磺酸型聚氨酯离聚物的离子导电性能

本文以多种聚醚为软段，二异氰酸酯（ＭＤＩ和ＴＤＩ）为硬段，合成了多嵌段聚醚聚氨酯，以此聚氨酯为基材，与ＮａＨ及１，３－丙碳酸内酯反应，进一步合成了一系列不同离子化程度的阴离子型碳化聚氨酯离聚物，用交流阻抗谱仪测定了样品的阻抗谱，由此计算出样品的离子电导率。研究结果表明其他条件相同时，以聚乙二醇（ＰＥＧ）为软段的样品具有较高的离子电导率；以聚环氧丙烷（ＰＰＯ）为软段的样品次之，以聚四氢呋喃（ＰＴＭＯ）为软段的样品最低，对于离子化程度不同的聚氨酯离聚物以金属离子和烷氧单元之比为０．０５时导电性能最好。阳离子为Ｌｉ＋和Ｎａ＋的样品具有相近的离子电导率。     

聚氨酯/环氧树脂互穿网络硬质泡沫塑料反应过程和微观结构

聚氨酯／环氧树脂互穿网络(PU／EPIPN)硬泡中异氰酸根的消耗速度较纯PU硬泡高，是由于环氧树脂的固化荆同时也是异氰酸根反应的催化荆。而PU／EP IPN硬泡中环氧基的反应速度和反应程度均较纯EP网络低，归因于互穿网络对基团扩散的阻碍。在互穿网络硬泡形成过程中，存在环氧开环中所新产生的羟基与异氰酸根的反应、大分子多元醇中羟基与环氧基的反应以及异氰酸根与环氧基形成嗯唑烷酮的反应三种形成网络间的化学键的途径。同时由于PU／EPIPN硬泡高度的交联，使得IPN硬泡中两个网络具有良好的相容性。动态力学性能表明所有IPN样品都只有一个玻璃化温度。透射电镜表明IPN样品无明显的相界面。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.